Created using spr 1.3.4

Created using spr 1.3.4

[skip ci]

This will allow us to atomically swap out RingBuffer and StackDepot.

Patched into AOSP and ran debuggerd_tests.

Add error messages showing the missing filenames.

Currently, we only get 'No such file or directory' without any(!)
further info. This patch will (only upon ENOENT error) iterate over all
requested files and print which ones are actually missing.

Use the legacy non-ObjC rename logic when dealing with selectors that
have zero or one arguments. In addition, make sure we don't add an extra
`:` during the rename.

Add a few more tests to verify this works (thanks to @ahoppen for the
tests and finding this bug).

Akin to `llvm::PatternMatch` and `llvm::MIPatternMatch`, the
`llvm::SDPatternMatch` introduced in this patch provides a DSL-alike
framework to match SDValue / SDNode with a more succinct syntax.

remove some obsoleted APIs from the library that have been fully
replaced with actual direct IR codegen

The lowering bridge stores the evvironment defaults (passed to the
constructor) as a reference. In the call to the constructor in bbc, the
defaults were passed as `{}`, which creates a temporary whose lifetime
ends immediately after the call.

The flang driver passes a member of the compilation instance to the
constructor, which presumably remains alive long enough, so storing the
reference in the bridge is justified. To avoid the dangling reference,
create an actual object `envDefaults` in bbc.

Remove all the code that set and tested Res. Change all convert*
functions to return void since none of them can fail. getInstruction
only has one main point of failure, after all calls to tryDecodeInst
have failed.

The base case of these call InferPtrInfo. This is dangerous due to
#82657, but it turns out none of these are used.

It seemed best to reduce the surface area until these are needed.

'region' is not a term of art in OpenACC, so switch it to refer to
'Compute Construct', which is accurate/reflects the standard.

Correct llvm-reduce strictfp test to follow the rules documented in the
LangRef:
https://llvm.org/docs/LangRef.html#constrained-floating-point-intrinsics

This test needed the strictfp attribute added to function definitions.

Test changes verified with D146845.

Summary:
The GPU target has recently been changed to support standard `libc`
build rules. This means we should be able to build for it both in
`LLVM_ENABLE_PROJECTS` mode, or targeting the runtimes directory
directly as in the LLVM `libc` documentation. Previously this failed
because the version check on the compiler was too strict and the
`--target=` options were not being set on the link jobs unless in CMake
cross compiliation mode. This patch fixes those so the following config
should work now to build the GPU target directly if using NVPTX.

```
cmake ../runtimes -DCMAKE_BUILD_TYPE=Release \
  -DCMAKE_CXX_COMPILER=clang++ -DCMAKE_C_COMPILER=clang \
  -DLLVM_ENABLE_RUNTIMES=libc -DLLVM_RUNTIMES_TARGET=nvptx64-nvidia-cuda \
  -DLLVM_DEFAULT_TARGET_TRIPLE=nvptx64-nvidia-cuda \
  -DLIBC_HDRGEN_EXE=/path/to/hdrgen/libc-hdrgen \
  -DLLVM_LIBC_FULL_BUILD=ON -GNinja
```

Summary:
The AMDGPU target needs an external clock symbol so the driver can set
the frequency with the correct value. This was left over from the
previous implementation and I forgot to remove it when actually
implementing the timing utilities.

The diagnostic message had four format specifiers but only three
parameters. This patch adds what I assume to be the missing
parameter.

These are hoped to provide more convenient and less error prone
facilities to encode and decode fields than manually defined constants
and functions.

we would replace the alloca with tagp for debug instructions, then
replace it back with the original alloca. it's easier to just skip the
replacement.

Clean up unused member variable.

This is a follow-up to #82333. It is possible that the target block of a
`BlockTypeConversionRewrite` is detached, so the `MLIRContext` cannot be
taken from the block.

Target::SetArchitecture() does not necessarily set the triple that is
being passed in, and will unconditionally log the real architecture to
the log channel. By flipping the order between the log outputs, the
resulting combined log makes a lot more sense to read.

This patch enables translation of svpmov intrinsic to the correct
assembly instruction, instead of function call.

Related discussion:
https://github.com/llvm/llvm-project/pull/73908/files#r1414913030.

This change fixes #73547.

All SchedModel files have a line that looks like:

```
def SomeModel : SchedMachineModel;
let SchedModel = SomeModel in {
  ...
}
```

TableGen requires that all records defined within the top level `let`
must have a field `SchedModel` somewhere in their nested record
hierarchy (i.e. the record has a field `SchedModel : SchedMachineModel`
or recursively, one of its members has a field `SchedModel :
SchedMachineModel`).

Classes such as `SchedPredicate` have added a field `SchedModel :
SchedMachineModel`, even though the field is never used, just to supress
**errors** (not warnings) caused from having the top level let in the
model files. This decision was made to avoid having hundreds of the same
`let` statement littered in every scheduler model file.

The reason we have never seen an error for `SchedVar` before is because
`SchedVar` is never instantiated with a `def`. Instead, it is only
created as a value that is consumed by `SchedWriteVariant`:

```
... : SchedWriteVariant<[SchedVar<...>, SchedVar<...>]>;
```

There is a problem with this style of instantiation. In particular, the
problem arises as we try to take a class based approach to building
scheduler models. I will describe the problem from the bottom up.

The `LMULWriteResMXVariant` multiclass takes in a `SchedPredicateBase
Pred`. Today, the RISCVSchedSiFive7.td file defines `VLDSX0Pred` outside
the scope of any class. That means that `VLDSX0Pred` exists before
`LMULWriteResMXVariant` multiclass is instantiated. With this approach,
there is no error since the predicate is instantated in entirety before
the variant multiclass is instantiated. However, I have the intention to
move the definition of both the predicate and the variant multiclass
records inside a multiclass to factor out common parts between multiple
scheduler models.

I plan to have something like:

```
multiclass SiFive7Base<SiFive7BaseConfig c> {
  def VLDSX0Pred : ...;
  // Need defvar since record is prefixed with NAME.
  defvar VLDSX0Pred = !cast<...>(NAME # VLDSX0Pred);
  defm SiFive7 : LMULWriteResMXVariant<VLDSX0Pred>;
}

defm "SiFive7Version1" : SiFive7Base<SiFive7BaseConfig<...>>;
defm "SiFive7Version2" : SiFive7Base<SiFive7BaseConfig<...>>;
```

In this scheme, VLDSX0Pred is defined within the same multiclass
transaction that the `LMULWriteResMXVariant` is defined in. For some
reason, TableGen does not allow `Values` to reference records that were
created in the same parent record construction. If the `SchedVar` is not
a `def`, then it will not be able to find the record `NAME #
VLDSX0Pred`. Making it a def, allows TableGen to find `NAME #
VLDSX0Pred` in scope.

The simplest example of this is:

```
class A {}
class B<A a> { A x = a;}
class C<B b> { B y = b;}
multiclass D {
  def MyA : A;
  defvar aa = !cast<A>(NAME # MyA);
  // This works
  def : B<aa>;
  // This does not work because constructing B by value cannot find `NAME # MyA`
  // error: Undefined reference to record: 'MyA'
  def : C<B<aa>>;
  // To fix it, define it like such:
  def MyB : B<aa>;
  defvar bb = !cast<B>(NAME # MyB);
  def : C<bb>;
}
defm "" : D;
```

In summary, in order to use a class based approach to creating scheduler
resources to promote resusability, `SchedVar`s must be created using
defs instead of being instantiated by value so that it can resolve
records that were part of the instantiation of the parent record being
created. In order to do this without refactoring the top level `let`
statement that all scheduler model files use, we add an unused field
`SchedModel : SchedMachineModel` to `SchedVar`, similiar to what has
been done in `SchedPredicate`.

Like linux releases, export a tar.xz files containing most llvm tools,
including non toolchain utilities, llvm-config, llvm-link and others.

We do this by reconfiguring cmake one last time at the last step,
running the install target so we do not need to recompile anything.

Fix #51192
Fix #53052

Enables conversion between llvm.dbg.label and DPLabel.

Summary:
This block of code is used to prevent a GPU-based cross compiling build
from taking incompatible arguments. However this incorrectly used the
LLVM default triple instead of the runtimes target. Fix that so the bots
can continue to default the triple to NVPTX.

This commit fixes memory leaks that were introduced by #81759. The way
ops and blocks are erased changed slightly.

The leaks were caused by an incorrect implementation of op builders:
blocks must be created with the supplied builder object. Otherwise, they
are not properly tracked by the dialect conversion and can leak during
rollback.

We might be visiting them more than once. We used to return true for
second and subsequent cases, just because we had already visited it
before.

This is a followup from this discussion
https://github.com/llvm/llvm-project/pull/80735#discussion_r1486586017
to mark targets that were initially marked as UNSUPPORTED with an XFAIL
instead.

This patch extends `propagatesPoison` to handle more integer intrinsics.
It will turn more logical ands/ors into bitwise ands/ors.

See also https://reviews.llvm.org/D99671.

Fix Test ARM SME library and build rule.

When reconstructing lines from a macro expansion, make sure that lines
at different levels in the expanded code get indented correctly as part
of the macro argument.

These patterns can already be used via
populateMathPolynomialApproximationPatterns, but that includes a number
of other patterns that may not be needed.

There are already similar functions for expansion.

For now only adding tanh and erf since I have a concrete use case for
these two.

The below culprit patch enabled the generation of asynchronous unwind
tables (-funwind-tables=2) by default for RISCV for both linux and
RISCVToolChain baremetal object. However, since there are 2 baremetal
toolchain objects for RISCV, this created a discrepancy between their
behavior. Moreover, enabling the generation of asynchronous unwind
tables based on whether `-gcc-toolchain` option is present or not
doesn't seem to be the best criteria to decide on the same. This patch
make the behavior consistent by disabling the unwind tables in
RISCVToolChain Baremetal object.

Culprit Patch - https://reviews.llvm.org/D145164

TestArmSME was added in https://github.com/llvm/llvm-project/commit/e1326434742980b03433464dd9435ea66ad5be47, now we need to add dependency on it.

`%ld` specifier is defined to work on values of type `long`. The parameter given to `fprintf` is of type `intptr_t` whose actual underlying integer type is unspecified. On Unix systems it happens to commonly be `long` but on 64-bit Windows it is defined as `long long`.

The cross-platform way to print a `intptr_t` is to use `PRIdPTR` which expands to the correct format specifier for `intptr_t`. This avoids any undefined behaviour and compiler warnings.