Some platforms such as hifive unmatched doesn't implement mcountinhibit
csr. However, it has hardware events that can be monitored using 2
hpmcounter it has (i.e. mhpmcounter3 & mhpmcounter4).

Currently, PMU extension disabled if mcountinhibit is absent. That's not
really necessary as long as the supervisor OS keeps track of the delta
value of the counters. Without mcountinhibit, the delta value won't be
entirely accurate because the counters are freely running. However, that
should be fine to produce an approximate counter value which can help
performance analysis. Perf sampling won't work though as sscof extension
is not present in hifive unmatched.

Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>

The mhpm bits represent the number of bits available in mhpmcounter
while counter width describes a zero indexed value. Fix the counter width
calculation.

Fixes: 13d40f21

 ("lib: sbi: Add PMU support")
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>

The hardware solely relies on the event selector value in mhpmevent
to figure out what event to monitor using that counter. It should be
reset when counter reset happens.

Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>

A platform may use programmable counters for cycle/instret events.
The priv spec allows that provided that cycle/instret also report those
events in addition to the programmable counters. We should allow that
functionality in OpenSBI.

Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>

OpenSBI doesn't use any counters for its own usage. Thus, all the counters
can be made accessible for lower privilege mode always. However, the
mcountinhibit must be set so that the counter doesn't increment.
As a result, we don't have to enable/disable mcounteren at every start/stop.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>

This patch adds sscofpmf extension in pmu module which includes
following things.

1. Enable overflow irq when starting a counter.
2. Setting the correct event filters passed from supervisor.
3. Delegating the overflow interrupt to the supervisor.
4. Add RV32 support for sscofpmf.

Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>

OpenSBI doesn't handle PMU counters for now.

Delegate the overflow counter to S-mode always.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>

Sscofpmf ISA extension introduces PMU counter overflow and filtering support.
It introduces a read only `scountovf` csr that can be used to detect if
a hart supports this extension at runtime. However, this feature is only
useful if the hart already supports mcounteren and mcountinhibit.

Add a dynamic detection mechanism and boot time print message if sscofpmf
is present.

Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>

The Sscofpmf extension introduces mhpmevent[h] csrs to handle filtering
/overflow bits in RV32. There is no way to read/write mcountinhibit
using mcountinhibit csr using a variable.

Updated the support to read/write mhpmevent[h] and mcountinhibit csr.

Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>

[1] https://drive.google.com/file/d/1KcjgbLM5L1ZKY8934aJl8aQwGlMz6Cbo/view



Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>

The initialization of a reset driver may fail for various reasons, like
a PMIC based reset driver not finding the required I2C driver. The return
code of the init routine may take other error values than -ENODEV.

If the initialization of a reset driver fails, this should not lead to the
board hanging. It is enough that the reset driver does not call
sbi_system_reset_add_device() to avoid invoking the driver for a device
that could not be initialized.

Change the return type of fdt_reset_init() to void.
Print a message if an error occurs.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

Move the fdt_reset_init() invocation from generic_early_init() to
generic_final_init(). This allows to print error messages.

Ignore the return value of fdt_reset_init() as we should not stop booting
due to failure to initialize reset drivers.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

Moving the sbi_boot_print_general() call after the
sbi_platform_final_init() call allows to print devices initialized in the
latter.

To keep the overall print sequence the same also move
sbi_boot_print_domains().

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

Convert static array to sbi_list.

This removes size limitation, makes add/remove more efficient and
saves space.

Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

The parameter passed to HFENCE.GVMA instruction in rs1 register
is guest physical address right shifted by 2 (i.e. divided by 4).

Unfortunately, we overlooked the semantics of rs1 registers for
HFENCE.GVMA instruction and never right shifted guest physical
address by 2. This issue did not manifest for hypervisors till
now because all H-extension implementations (such as QEMU, Spike,
Rocket Core FPGA, etc) we tried till now were conservatively
flushing everything upon any HFENCE.GVMA instruction.

This patch fixes GPA passed to __sbi_hfence_gvma_vmid_gpa()
and __sbi_hfence_gvma_gpa() functions.

Fixes: 331ff6a1

 ("lib: Support stage1 and stage2 tlb flushing")
Reported-by: Ian Huang <ihuang@ventanamicro.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>

This simply adds an helper to get fdt address which is more explicit than
sbi_scratch_thishart_arg1_ptr.

Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

Although we have PRILX to help us print unsigned long without
considering the 32bit/64bit differences, there are still some
places using 08lx and 016lx manually --- leading to redundant code.

This commit fixes the issue by using PRILX all the time.

Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

Now that sbi_system support multiple system reset devices, we should
register separate devices for GPIO restart and GPIO poweroff because
DT describes these as separate devices with different compatible
strings.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>

The T-HEAD PLIC implementation requires setting a delegation bit
to allow access from S-mode. Now that the T-HEAD PLIC has its own
compatible string, set this bit automatically from the PLIC driver,
instead of reaching into the PLIC's MMIO space from another driver.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

When we are doing opensbi development, we want to know the build time
and compiler info for debug purpose.

To enable this message, please add "BUILD_INFO=y", like:

```
make BUILD_INFO=y
```

NOTE: Using `BUILD_INFO=y` without specifying SOURCE_DATE_EPOCH will
violate "reproducible builds". So it's ONLY for development and debug
purpose, and should NOT be used in a product which follows "reproducible
builds".

Signed-off-by: Wei Fu <wefu@redhat.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

The SBI specification requires that sbi_system_reset() returns
SBI_ERR_INVALID_PARAM if reset_type or reset_reason are not valid.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>

Instead of saving context only for default non-retentive suspend,
we should save context for all non-retentive suspend types.

Fixes: 74756891

 ("lib: sbi: Implement SBI HSM suspend function")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>

Let's make system_reset_check returning priority instead of only
true/false. In that case 0 - means not supported, and anything above
means priority that makes existing reset handlers being used in first
place, unless it is decided to lower their priority.

The handler with the most priority wins.

Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

To support different handlers for different types of resets, we are
adding a sbi_list of restart handlers.

Instead of sbi_system_reset_set_device we use
sbi_system_reset_add_device to reflect the actual meaning.

Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

The GPIO reset driver supports reset and poweroff. But not all boards
support both. gpio_system_reset_check() must detect this situation.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

We should use sbi_timer_mdelay() instead of custom gpio_mdelay() in
the gpio reset driver.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>

We now have frequency of the timer device provided by the platform
support so we can emulate desired delay using a loop where the number
loop iterations are based on timer frequency.

This patch provides sbi_timer_delay_loop() for above purpose.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>

We now have frequency in timer device instance provided by platform
so let's print timer frequency as part of the boot prints.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>

Generic mdelay() and udelay() functions can be provided by the
sbi_timer framework if timer frequency is available in the timer
instance provided by the platform support or timer driver.

This patch adds timer frequency (timer_freq) member in the
struct sbi_timer_device for above purpose.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>

We add fdt_parse_timebase_frequency() function which can be used
by ACLINT mtimer driver and platform code to get timebase frequency.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>

We use BUG() macro in csr_read_num(), csr_write_num(), and
misa_string() functions for unhandled cases.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

Three macros are added. One is called BUG, which is used to put in an
unreachable branch. One is called BUG_ON, which is used to check bugs
and assert conditions are opposite. One is called SBI_ASSERT, used for
assertion checking.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

The original version of ctz will cause an endless loop, if the parameter
passed in is 0. This commit fixes this bug.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

One of the watchdogs in the D1 SoC provides a "soft reset" function,
which allows software to immediately reset the entire SoC. Add a driver
so it can implement the SBI system reset function.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

In preparation for adding a new fdt_reset driver, ensure the existing
lists are sorted alphabetically.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

sbi_platform_get_features_str() uses sbi_snprintf() to construct the
features_str. However, it passes the wrong length value (i.e., the nfstr),
which should be (nfstr-offset) as the starting point of str (i.e.,
features_str + offset) changes.

This commit also checks the return value of snprintf, and handles the
corner case that the string buffer is full.

Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

As other exported fifo functions, we should check whether the fifo is
valid in sbi_fifo_is_empty and sbi_fifo_is_full. To this end, this patch
changes the retval from bool to int, and the two functions will return
SBI_EINVAL in the case the fifo is invalid.

Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

Avoid getting messages from multiple harts (using dprintf and printf)
concurrently with a spinlock serializaing calls to sbi_dprintf(),
sbi_printf() and sbi_puts()

Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

Correcting the name of faults delegation CSR
%s/mfdeleg/medeleg

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

It can be useful to make SBI v0.2 or newer ecalls from this payload
for testing purposes. To support this, convert the macros to use the
extension/function parameter convention.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>