aboutsummaryrefslogtreecommitdiff
path: root/opcodes
AgeCommit message (Collapse)AuthorFilesLines
2018-05-15Implement Read/Write constraints on system registers on AArch64Tamar Christina6-94/+197
This patch adds constraints for read and write only system registers with the msr and mrs instructions. The code will treat having both flags set and none set as the same. These flags add constraints that must be matched up. e.g. a system register with a READ only flag set, can only be used with mrs. If The constraint fails a warning is emitted. Examples of the warnings generated: test.s: Assembler messages: test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3' test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0' test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3' and disassembly notes: 0000000000000000 <main>: 0: d5130503 msr dbgdtrtx_el0, x3 4: d5130503 msr dbgdtrtx_el0, x3 8: d5330503 mrs x3, dbgdtrrx_el0 c: d5330503 mrs x3, dbgdtrrx_el0 10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register. Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during disassembly the constraints are use to disambiguate between the two. An exact constraint match is always prefered over partial ones if available. As always the warnings can be suppressed with -w and also be made errors using warnings as errors. binutils/ PR binutils/21446 * doc/binutils.texi (-M): Document AArch64 options. gas/ PR binutils/21446 * testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test. * testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise. * testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise. * testsuite/gas/aarch64/sysreg-diagnostic.s: New. * testsuite/gas/aarch64/sysreg-diagnostic.l: New. * testsuite/gas/aarch64/sysreg-diagnostic.d: New. include/ PR binutils/21446 * opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New. opcodes/ PR binutils/21446 * aarch64-asm.c (opintl.h): Include. (aarch64_ins_sysreg): Enforce read/write constraints. * aarch64-dis.c (aarch64_ext_sysreg): Likewise. * aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here. (F_REG_READ, F_REG_WRITE): New. * aarch64-opc.c (aarch64_print_operand): Generate notes for AARCH64_OPND_SYSREG. (F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h. (aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0, mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1, id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1, id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1, id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1, mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1, id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1, id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1, id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1, csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2, rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0, mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1, mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1, pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0. * aarch64-tbl.h (aarch64_opcode_table): Add constraints to msr (F_SYS_WRITE), mrs (F_SYS_READ).
2018-05-15Allow non-fatal errors to be emitted and for disassembly notes be placed on ↵Tamar Christina3-3/+35
AArch64 This patch adds a new platform option "notes" that can be used to indicate if disassembly notes should be placed in the disassembly as comments. These notes can contain information about a failing constraint such as reading from a write-only register. The disassembly will not be blocked because of this but -M notes will emit a comment saying that the operation is not allowed. For assembly this patch adds a new non-fatal status for errors. This is essentially a warning. The reason for not creating an actual warning type is that this causes the interaction between the ordering of warnings and errors to be problematic. Currently the error buffer is almost always filled because of the way operands are matched during assembly. An earlier template may have put an error there that would only be displayed if no other template matches or generates a higher priority error. But by definition a warning is lower priority than a warning, so the error (which is incorrect if another template matched) will supersede the warning. By treating warnings as errors and only later relaxing the severity this relationship keeps working and the existing reporting infrastructure can be re-used. binutils/ PR binutils/21446 * doc/binutils.texi (-M): Document AArch64 options. * NEWS: Document notes and warnings. gas/ PR binutils/21446 * config/tc-aarch64.c (print_operands): Indicate no notes. (output_operand_error_record): Support non-fatal errors. (output_operand_error_report, warn_unpredictable_ldst, md_assemble): Likewise. include/ PR binutils/21446 * opcode/aarch64.h (aarch64_operand_error): Add non_fatal. (aarch64_print_operand): Support notes. opcodes/ PR binutils/21446 * aarch64-dis.c (no_notes: New. (parse_aarch64_dis_option): Support notes. (aarch64_decode_insn, print_operands): Likewise. (print_aarch64_disassembler_options): Document notes. * aarch64-opc.c (aarch64_print_operand): Support notes.
2018-05-15Modify AArch64 Assembly and disassembly functions to be able to fail and ↵Tamar Christina9-556/+759
report why. This patch if the first patch in a series to add the ability to add constraints to system registers that an instruction must adhere to in order for the register to be usable with that instruction. These constraints can also be used to disambiguate between registers with the same encoding during disassembly. This patch adds a new flags entry in the sysreg structures and ensures it is filled in and read out during assembly/disassembly. It also adds the ability for the assemble and disassemble functions to be able to gracefully fail and re-use the existing error reporting infrastructure. The return type of these functions are changed to a boolean to denote success or failure and the error structure is passed around to them. This requires aarch64-gen changes so a lot of the changes here are just mechanical. gas/ PR binutils/21446 * config/tc-aarch64.c (parse_sys_reg): Return register flags. (parse_operands): Fill in register flags. gdb/ PR binutils/21446 * aarch64-tdep.c (aarch64_analyze_prologue, aarch64_software_single_step, aarch64_displaced_step_copy_insn): Indicate not interested in errors. include/ PR binutils/21446 * opcode/aarch64.h (aarch64_opnd_info): Change sysreg to struct. (aarch64_decode_insn): Accept error struct. opcodes/ PR binutils/21446 * aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean and take error struct. * aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane, aarch64_ins_reglist, aarch64_ins_ldst_reglist, aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist, aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half, aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm, aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits, aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm, aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple, aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm, aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12, aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg, aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier, aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended, aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl, aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl, aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6, aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw, aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz, aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw, aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm, aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov, aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist, aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm, aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two, aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise. * aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise. * aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane, aarch64_ext_reglist, aarch64_ext_ldst_reglist, aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist, aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half, aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm, aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits, aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm, aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple, aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm, aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12, aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg, aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier, aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended, aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl, aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl, aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6, aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw, aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz, aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw, aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm, aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov, aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist, aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm, aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two, aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise. (determine_disassembling_preference, aarch64_decode_insn, print_insn_aarch64_word, print_insn_data): Take errors struct. (print_insn_aarch64): Use errors. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-gen.c (print_operand_inserter): Use errors and change type to boolean in aarch64_insert_operan. (print_operand_extractor): Likewise. * aarch64-opc.c (aarch64_print_operand): Use sysreg struct.
2018-05-15Fix error messages in the NFP sources when building for 32-bit targets.Francois H. Theron2-45/+44
bfd * targets.c: Wrap nfp_elf64_vec in BFD64 ifdef. include * opcode/nfp.h: Use uint64_t instead of bfd_vma. opcodes * nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.
2018-05-09x86: Remove Disp<N> from movidir{i,64b}H.J. Lu2-3/+7
* i386-opc.tbl: Remove Disp<N> from movidir{i,64b}.
2018-05-09PR22069, Several instances of register accidentally spelled as regsiterAlan Modra3-2/+7
PR 22069 binutils/ * od-macho.c (dump_unwind_encoding_x86): Adjust for macro renaming. cpu/ChangeLog * or1kcommon.cpu (spr-reg-info): Typo fix. include/ChangeLog * mach-o/unwind.h (MACH_O_UNWIND_X86_64_RBP_FRAME_REGISTERS): Rename from MACH_O_UNWIND_X86_64_RBP_FRAME_REGSITERS. (MACH_O_UNWIND_X86_EBP_FRAME_REGISTERS): Rename from MACH_O_UNWIND_X86_EBP_FRAME_REGSITERS. opcodes/ChangeLog * cr16-opc.c (cr16_instruction): Comment typo fix. * hppa-dis.c (print_insn_hppa): Likewise. sim/ppc/ChangeLog * e500_registers.h: Comment typo fix. * ppc-instructions (ppc_insn_mfcr): Likewise.
2018-05-08RISC-V: Add missing hint instructions from RV128I.Jim Wilson2-9/+54
gas/ * testsuite/gas/riscv/c-zero-imm.d: Add more tests. * testsuite/gas/riscv/c-zero-imm.s: Likewise. * testsuite/gas/riscv/c-zero-reg.d: Fix typo in test. Add disabled future test for RV128 support. * testsuite/gas/riscv/c-zero-reg.s: Likewise. include/ * opcode/riscv-opc.h (MATCH_C_SRLI64, MASK_C_SRLI64): New. (MATCH_C_SRAI64, MASK_C_SRAI64): New. (MATCH_C_SLLI64, MASK_C_SLLI64): New. opcodes/ * riscv-opc.c (match_c_slli, match_slli_as_c_slli): New. (match_c_slli64, match_srxi_as_c_srxi): New. (riscv_opcodes) <slli, sll>: Use match_slli_as_c_slli. <srli, srl, srai, sra>: Use match_srxi_as_c_srxi. <c.slli, c.srli, c.srai>: Use match_s_slli. <c.slli64, c.srli64, c.srai64>: New.
2018-05-08Correct powerpc spe opcode lookupAlan Modra2-6/+12
Defining SPE2_OPCD_SEGS as 13 discounts the possibility that we'd ever look up spe2_opcd_indices[14..16], which I think is possible. Extend that array to size 16+1, using the macros we use to index the array. Similarly use the index macros for PPC_OPCD_SEGS and VLE_OPCD_SEGS. * ppc-dis.c (PPC_OPCD_SEGS): Define using PPC_OP. (VLE_OPCD_SEGS, SPE2_OPCD_SEGS): Similarly, using macros used to partition opcode space for index lookup.
2018-05-07Simplify VLE handling in print_insn_powerpc().Peter Bergner2-35/+26
opcodes/ * ppc-dis.c (print_insn_powerpc) <insn_is_short>: Replace this... <insn_length>: ...with this. Update usage. Remove duplicate call to *info->memory_error_func.
2018-05-07Enable Intel MOVDIRI, MOVDIR64B instructionsH.J. Lu7-5115/+5285
gas/ * config/tc-i386.c (cpu_arch): Add .movdir, .movdir64b. (cpu_noarch): Likewise. (process_suffix): Add check for register size. * doc/c-i386.texi: Document movdiri, movdir64b. * testsuite/gas/i386/i386.exp: Run MOVDIR{I,64B} tests. * testsuite/gas/i386/movdir-intel.d: New file. * testsuite/gas/i386/movdir.d: Likewise. * testsuite/gas/i386/movdir.s: Likewise. * testsuite/gas/i386/movdir64b-reg.s: Likewise. * testsuite/gas/i386/movdir64b-reg.l: Likewise. * testsuite/gas/i386/x86-64-movdir-intel.d: Likewise. * testsuite/gas/i386/x86-64-movdir.d: Likewise. * testsuite/gas/i386/x86-64-movdir.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.l: Likewise. opcodes/ * i386-dis.c (Gva): New. (enum): Add PREFIX_0F38F8, PREFIX_0F38F9, MOD_0F38F8_PREFIX_2, MOD_0F38F9_PREFIX_0. (prefix_table): New instructions (see prefix above). (mod_table): New instructions (see prefix above). (OP_G): Handle va_mode. * i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS, CPU_MOVDIR64B_FLAGS. (cpu_flags): Add CpuMOVDIRI and CpuMOVDIR64B. * i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B. (i386_cpu_flags): Add cpumovdiri and cpumovdir64b. * i386-opc.tbl: Add movidir{i,64b}. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2018-05-07x86: Replace AddrPrefixOp0 with AddrPrefixOpRegH.J. Lu4-14/+23
This patch replaces AddrPrefixOp0 with AddrPrefixOpReg to indicate that the size of register operand is controlled by the address size prefix. This will be used by Intel MOVDIRI and MOVDIR64B instructions later. gas/ * config/tc-i386.c (process_suffix): Check addrprefixopreg instead of addrprefixop0. opcodes/ * i386-gen.c (opcode_modifiers): Replace AddrPrefixOp0 with AddrPrefixOpReg. * i386-opc.h (AddrPrefixOp0): Renamed to ... (AddrPrefixOpReg): This. (i386_opcode_modifier): Rename addrprefixop0 to addrprefixopreg. * i386-opc.tbl: Replace AddrPrefixOp0 with AddrPrefixOpReg.
2018-05-07Cleanup ppc code dealing with opcode dumps.Peter Bergner3-44/+39
include/ * opcode/ppc.h (powerpc_num_opcodes): Change type to unsigned. (vle_num_opcodes): Likewise. (spe2_num_opcodes): Likewise. opcodes/ * ppc-opc.c (powerpc_num_opcodes): Likewise. (vle_num_opcodes): Likewise. (spe2_num_opcodes): Likewise. * ppc-dis.c (disassemble_init_powerpc) <powerpc_opcd_indices>: Rewrite initialization loop. (disassemble_init_powerpc) <vle_opcd_indices>: Likewise. (disassemble_init_powerpc) <spe2_opcd_indices>: Likewise. Initialize only once. gas/ * config/tc-ppc.c (ppc_setup_opcodes) <powerpc_opcodes>: Rewrite code to dump the entire opcode table. (ppc_setup_opcodes) <spe2_opcodes>: Likewise. (ppc_setup_opcodes) <vle_opcodes>: Likewise. Fix calculation of opcode index.
2018-05-01Fix unintialized memory in aarch64 opcodes.Tamar Christina2-3/+7
This patch fixes an issue where the memory for the opcode structure is not zero'd before the first exit branch. So there is one failure mode for which uninitialized memory is returned. This causes weird failures when the return code is not checked before inst is used. opcodes/ * aarch64-dis.c (aarch64_opcode_decode): Moved memory clear code.
2018-04-30This patch adds support to objdump for disassembly of NFP (Netronome Flow ↵Francois H. Theron10-207/+3545
Processor) ELF files (.nffw) as well as some basic readelf support. bfd * Makefile.am: Added NFP files to build. * archures.c: Added bfd_arch_nfp * config.bfd: Added NFP support. * configure.ac: Added NFP support. * cpu-nfp.c: New, for NFP support. * elf-bfd.h: Added elf_section_info() * elf64-nfp.c: New, for NFP support. * po/SRC-POTFILES.in: Added NFP source files. * targets.c: Added nfp_elf64_vec * bfd-in2.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils* readelf.c: Very basic support for EM_NFP and its section types. * testsuite/binutils-all/nfp: New directory. * testsuite/binutils-all/nfp/objdump.exp: New file. Run new tests. * testsuite/binutils-all/nfp/test2_ctx8.d: New file. * testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file. * testsuite/binutils-all/nfp/test1.d: New file. * testsuite/binutils-all/nfp/nfp6000.nffw: New file. * testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file. * NEWS: Mention the new support. include * dis-asm.h: Added print_nfp_disassembler_options prototype. * elf/common.h: Added EM_NFP, officially assigned. See Google Group Generic System V Application Binary Interface. * elf/nfp.h: New, for NFP support. * opcode/nfp.h: New, for NFP support. opcodes Makefile.am: Added nfp-dis.c. configure.ac: Added bfd_nfp_arch. disassemble.h: Added print_insn_nfp prototype. disassemble.c: Added ARCH_nfp and call to print_insn_nfp nfp-dis.c: New, for NFP support. po/POTFILES.in: Added nfp-dis.c to the list. Makefile.in: Regenerate. configure: Regenerate.
2018-04-27Revert "Enable Intel MOVDIRI, MOVDIR64B instructions."Igor Tsimbalist7-15311/+15097
This reverts commit a914a7c95895161c99533d5919b8504b37ea54a0.
2018-04-26Enable Intel MOVDIRI, MOVDIR64B instructions.Igor Tsimbalist7-15097/+15311
gas/ * config/tc-i386.c (cpu_arch): Add .movdir, .movdir64b. (cpu_noarch): Likewise. (process_suffix): Add check for register size. * doc/c-i386.texi: Document movdiri, movdir64b. * testsuite/gas/i386/i386.exp: Run MOVDIR{I,64B} tests. * testsuite/gas/i386/movdir-intel.d: New test. * testsuite/gas/i386/movdir.d: Likewise. * testsuite/gas/i386/movdir.s: Likewise. * testsuite/gas/i386/movdir64b-reg.s: Likewise. * testsuite/gas/i386/movdir64b-reg.l: Likewise. * testsuite/gas/i386/x86-64-movdir-intel.d: Likewise. * testsuite/gas/i386/x86-64-movdir.d: Likewise. * testsuite/gas/i386/x86-64-movdir.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.s: Likewise. * testsuite/gas/i386/x86-64-movdir64b-reg.l: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_0F38F8, PREFIX_0F38F9. (prefix_table): New instructions (see prefix above). Add Gva macro and handling in OP_G. * i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS, CPU_MOVDIR64B_FLAGS. (cpu_flags): Likewise. (opcode_modifiers): Add AddrPrefixOpReg. (i386_opcode_modifier): Likewise. * i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B. (i386_cpu_flags): Likewise. * i386-opc.tbl: Add movidir{i,64b}. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2018-04-26x86: fold various non-memory operand AVX512VL templatesJan Beulich3-2028/+570
There's little point carrying up to three templates per insn flavor when the sole difference is operand size and the dependency on AVX512VL being enabled. Instead the need for AVX512VL can be derived from an operand allowing for ZMMword as well as one or both or XMMword and YMMword (irrespective of whether this is a register or memory operand). Without further abstraction to deal with the different Disp8MemShift values between the templates, only a limited set (mostly ones only allowing for non-memory operands) can be folded, which is being done here. Also drop IgnoreSize wherever possible from anything that's being touched anyway.
2018-04-26x86: CpuXSAVE is a prereq for various other featuresJan Beulich3-31/+39
All of AVX, LWP, MPX, and PKU require XSAVE, and hence it as well as XRSTOR should be enabled when enabling these ISA extensions. Leverage these implications to shorten some of the cpu_flag_init[] entries.
2018-04-26x86: drop CpuRegMMX, CpuReg[XYZ]MM, and CpuRegMaskJan Beulich5-5220/+5212
It's not clear to me why they had been introduced - the respective comments in opcodes/i386-gen.c are certainly wrong: ymm<N> registers are very well supported (and necessary) with just AVX512F.
2018-04-26x86: x87-related adjustmentsJan Beulich3-24/+30
Neither 287 wrt 8087 nor 387 wrt 287 are proper supersets - in each case some insns get removed from the ISA (they become NOPs, but code intended for newer co-processors should not use them). Furthermore with .no87, ST should not be recognized as a register name.
2018-04-26x86: drop VexImmExtJan Beulich5-8075/+8078
It's only used in assertions, and hence not really needed for correct code generation.
2018-04-25x86: drop redundant AVX512VL shift templatesJan Beulich3-126/+6
These were wrongly left in place by commit ed438a93f1 ("x86: fold certain AVX512 rotate and shift templates").
2018-04-25Fix the mask for the sqrdml(a|s)h instructions.Tamar Christina2-2/+6
Rn is supposed to have a 5 bit range but instead was given 4 bits causing these instructions to disassemble as unknown instructions. opcodes/ * aarch64-tbl.h (sqrdmlah, sqrdmlsh): Fix masks. gas/ * testsuite/gas/aarch64/rdma.s: Test for larger register numbers. * testsuite/gas/aarch64/rdma.d: Update results. * testsuite/gas/aarch64/rdma-directive.d: Likewise.
2018-04-17Enable Intel CLDEMOTE instruction.Igor Tsimbalist7-5219/+5292
gas/ * config/tc-i386.c (cpu_arch): Add .cldemote. * doc/c-i386.texi: Document cldemote/.cldemote. * testsuite/gas/i386/cldemote-intel.d: New. * testsuite/gas/i386/cldemote.d: Likewise. * testsuite/gas/i386/cldemote.s: Likewise. * testsuite/gas/i386/i386.exp: Run new tests. * testsuite/gas/i386/x86-64-cldemote-intel.d: New. * testsuite/gas/i386/x86-64-cldemote.d: Likewise. * testsuite/gas/i386/x86-64-cldemote.s: Likewise. * testsuite/gas/i386/ilp32/x86-64-nops.d: Remove 0x0f1c NOP encoding that maps to cldemote. * testsuite/gas/i386/nops.d: Likewise. * testsuite/gas/i386/nops.s: Likewise. * testsuite/gas/i386/x86-64-nops.d: Likewise. * testsuite/gas/i386/x86-64-nops.s: Likewise. opcode/ * i386-dis.c: Add REG_0F1C_MOD_0, MOD_0F1C_PREFIX_0, PREFIX_0F1C. * i386-gen.c (cpu_flag_init): Add CPU_CLDEMOTE_FLAGS, (cpu_flags): Add CpuCLDEMOTE. * i386-init.h: Regenerate. * i386-opc.h (enum): Add CpuCLDEMOTE, (i386_cpu_flags): Add cpucldemote. * i386-opc.tbl: Add cldemote. * i386-tbl.h: Regenerate.
2018-04-16Remove sh5 and sh64 supportAlan Modra12-1595/+16
include/ * dis-asm.h: Remove sh5 and sh64 support. bfd/ * Makefile.am: Remove sh5 and sh64 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-sh.c: Likewise. * elf32-sh-relocs.h: Likewise. * elf32-sh.c: Likewise. * targets.c: Likewise. * elf32-sh64-com.c: Delete. * elf32-sh64.c: Delete. * elf32-sh64.h: Delete. * elf64-sh64.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove sh5 and sh64 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Delete. * sh64-opc.c: Delete. * sh64-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. bintuils/ * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. gas/ * Makefile.am: Remove sh5 and sh64 support. * config/tc-sh.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/cfi/cfi.exp: Likewise. * testsuite/gas/sh/basic.exp: Likewise. * config/tc-sh64.c: Delete. * config/tc-sh64.h: Delete. * doc/c-sh64.texi: Delete. * testsuite/gas/sh/sh64/abi-32.d: Delete. * testsuite/gas/sh/sh64/abi-32.s: Delete. * testsuite/gas/sh/sh64/abi-64.d: Delete. * testsuite/gas/sh/sh64/abi-64.s: Delete. * testsuite/gas/sh/sh64/basic-1.d: Delete. * testsuite/gas/sh/sh64/basic-1.s: Delete. * testsuite/gas/sh/sh64/case-1.d: Delete. * testsuite/gas/sh/sh64/case-1.s: Delete. * testsuite/gas/sh/sh64/case-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange1-1.d: Delete. * testsuite/gas/sh/sh64/crange1-2.d: Delete. * testsuite/gas/sh/sh64/crange1.s: Delete. * testsuite/gas/sh/sh64/crange2-1.d: Delete. * testsuite/gas/sh/sh64/crange2-2.d: Delete. * testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange2.s: Delete. * testsuite/gas/sh/sh64/crange3-1.d: Delete. * testsuite/gas/sh/sh64/crange3.s: Delete. * testsuite/gas/sh/sh64/crange4-1.d: Delete. * testsuite/gas/sh/sh64/crange4.s: Delete. * testsuite/gas/sh/sh64/crange5-1.d: Delete. * testsuite/gas/sh/sh64/crange5.s: Delete. * testsuite/gas/sh/sh64/creg-1.d: Delete. * testsuite/gas/sh/sh64/creg-1.s: Delete. * testsuite/gas/sh/sh64/creg-2.d: Delete. * testsuite/gas/sh/sh64/creg-2.s: Delete. * testsuite/gas/sh/sh64/datal-1.s: Delete. * testsuite/gas/sh/sh64/datal-2.d: Delete. * testsuite/gas/sh/sh64/datal-2.s: Delete. * testsuite/gas/sh/sh64/datal-3.s: Delete. * testsuite/gas/sh/sh64/datal32-1.d: Delete. * testsuite/gas/sh/sh64/datal32-3.d: Delete. * testsuite/gas/sh/sh64/datal64-1.d: Delete. * testsuite/gas/sh/sh64/datal64-3.d: Delete. * testsuite/gas/sh/sh64/eh-1.d: Delete. * testsuite/gas/sh/sh64/eh-1.s: Delete. * testsuite/gas/sh/sh64/endian-1.d: Delete. * testsuite/gas/sh/sh64/endian-1.s: Delete. * testsuite/gas/sh/sh64/endian-2.d: Delete. * testsuite/gas/sh/sh64/endian-2.s: Delete. * testsuite/gas/sh/sh64/err-1.s: Delete. * testsuite/gas/sh/sh64/err-2.s: Delete. * testsuite/gas/sh/sh64/err-3.s: Delete. * testsuite/gas/sh/sh64/err-4.s: Delete. * testsuite/gas/sh/sh64/err-abi-32.s: Delete. * testsuite/gas/sh/sh64/err-abi-64.s: Delete. * testsuite/gas/sh/sh64/err-dsp.s: Delete. * testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete. * testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt-1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete. * testsuite/gas/sh/sh64/err-ptb-1.s: Delete. * testsuite/gas/sh/sh64/err-ptb-2.s: Delete. * testsuite/gas/sh/sh64/err.exp: Delete. * testsuite/gas/sh/sh64/immexpr1.s: Delete. * testsuite/gas/sh/sh64/immexpr2.s: Delete. * testsuite/gas/sh/sh64/immexpr32-1.d: Delete. * testsuite/gas/sh/sh64/immexpr32-2.d: Delete. * testsuite/gas/sh/sh64/immexpr64-1.d: Delete. * testsuite/gas/sh/sh64/immexpr64-2.d: Delete. * testsuite/gas/sh/sh64/lineno.d: Delete. * testsuite/gas/sh/sh64/lineno.s: Delete. * testsuite/gas/sh/sh64/localcom-1.d: Delete. * testsuite/gas/sh/sh64/localcom-1.s: Delete. * testsuite/gas/sh/sh64/mix-1.d: Delete. * testsuite/gas/sh/sh64/mix-1.s: Delete. * testsuite/gas/sh/sh64/mix-noexp-1.d: Delete. * testsuite/gas/sh/sh64/movi-1.s: Delete. * testsuite/gas/sh/sh64/movi-2.s: Delete. * testsuite/gas/sh/sh64/movi-3.d: Delete. * testsuite/gas/sh/sh64/movi-3.s: Delete. * testsuite/gas/sh/sh64/movi32-1.d: Delete. * testsuite/gas/sh/sh64/movi32-2.d: Delete. * testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/movi64-1.d: Delete. * testsuite/gas/sh/sh64/movi64-2.d: Delete. * testsuite/gas/sh/sh64/movi64-2.s: Delete. * testsuite/gas/sh/sh64/movi64-3.d: Delete. * testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt-1.d: Delete. * testsuite/gas/sh/sh64/pt-1.s: Delete. * testsuite/gas/sh/sh64/pt-2.s: Delete. * testsuite/gas/sh/sh64/pt-noexp-1.d: Delete. * testsuite/gas/sh/sh64/pt32-1.d: Delete. * testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt64-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-2.d: Delete. * testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/ptc-1.s: Delete. * testsuite/gas/sh/sh64/ptc32-1.d: Delete. * testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext-1.s: Delete. * testsuite/gas/sh/sh64/ptext32-1.d: Delete. * testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/rel-1.s: Delete. * testsuite/gas/sh/sh64/rel-2.s: Delete. * testsuite/gas/sh/sh64/rel-3.s: Delete. * testsuite/gas/sh/sh64/rel-4.s: Delete. * testsuite/gas/sh/sh64/rel-5.s: Delete. * testsuite/gas/sh/sh64/rel32-1.d: Delete. * testsuite/gas/sh/sh64/rel32-2.d: Delete. * testsuite/gas/sh/sh64/rel32-3.d: Delete. * testsuite/gas/sh/sh64/rel32-4.d: Delete. * testsuite/gas/sh/sh64/rel32-5.d: Delete. * testsuite/gas/sh/sh64/rel64-1.d: Delete. * testsuite/gas/sh/sh64/rel64-2.d: Delete. * testsuite/gas/sh/sh64/rel64-3.d: Delete. * testsuite/gas/sh/sh64/rel64-4.d: Delete. * testsuite/gas/sh/sh64/rel64-5.d: Delete. * testsuite/gas/sh/sh64/relax-1.d: Delete. * testsuite/gas/sh/sh64/relax-1.s: Delete. * testsuite/gas/sh/sh64/relax-2.d: Delete. * testsuite/gas/sh/sh64/relax-2.s: Delete. * testsuite/gas/sh/sh64/relax-3.d: Delete. * testsuite/gas/sh/sh64/relax-3.s: Delete. * testsuite/gas/sh/sh64/sh64.exp: Delete. * testsuite/gas/sh/sh64/shift-1.s: Delete. * testsuite/gas/sh/sh64/shift-2.s: Delete. * testsuite/gas/sh/sh64/shift-3.s: Delete. * testsuite/gas/sh/sh64/shift32-1.d: Delete. * testsuite/gas/sh/sh64/shift32-3.d: Delete. * testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete. * testsuite/gas/sh/sh64/shift64-1.d: Delete. * testsuite/gas/sh/sh64/shift64-2.d: Delete. * testsuite/gas/sh/sh64/shift64-3.d: Delete. * testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete. * testsuite/gas/sh/sh64/syntax-1.d: Delete. * testsuite/gas/sh/sh64/syntax-1.s: Delete. * testsuite/gas/sh/sh64/syntax-2.d: Delete. * testsuite/gas/sh/sh64/syntax-2.s: Delete. * testsuite/gas/sh/sh64/ua-1.s: Delete. * testsuite/gas/sh/sh64/ua32-1.d: Delete. * testsuite/gas/sh/sh64/ua64-1.d: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sh5 and sh64 support. * configure.tgt: Likewise. * ldlang.c: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-gc/pr13683.d: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/ld-r-1.d: Likewise. * testsuite/ld-sh/rd-sh.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * emulparams/shelf32.sh: Delete. * emulparams/shelf32_linux.sh: Delete. * emulparams/shelf32_nbsd.sh: Delete. * emulparams/shelf64.sh: Delete. * emulparams/shelf64_nbsd.sh: Delete. * emulparams/shlelf32.sh: Delete. * emulparams/shlelf32_linux.sh: Delete. * emulparams/shlelf32_nbsd.sh: Delete. * emulparams/shlelf64.sh: Delete. * emulparams/shlelf64_nbsd.sh: Delete. * emultempl/sh64elf.em: Delete. * testsuite/ld-sh/sh64/abi32.sd: Delete. * testsuite/ld-sh/sh64/abi32.xd: Delete. * testsuite/ld-sh/sh64/abi64.sd: Delete. * testsuite/ld-sh/sh64/abi64.xd: Delete. * testsuite/ld-sh/sh64/abixx-noexp.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.xd: Delete. * testsuite/ld-sh/sh64/crange-1.s: Delete. * testsuite/ld-sh/sh64/crange-2a.s: Delete. * testsuite/ld-sh/sh64/crange-2b.s: Delete. * testsuite/ld-sh/sh64/crange-2c.s: Delete. * testsuite/ld-sh/sh64/crange-2d.s: Delete. * testsuite/ld-sh/sh64/crange-2e.s: Delete. * testsuite/ld-sh/sh64/crange-2f.s: Delete. * testsuite/ld-sh/sh64/crange-2g.s: Delete. * testsuite/ld-sh/sh64/crange-2h.s: Delete. * testsuite/ld-sh/sh64/crange-2i.s: Delete. * testsuite/ld-sh/sh64/crange1.rd: Delete. * testsuite/ld-sh/sh64/crange2.rd: Delete. * testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete. * testsuite/ld-sh/sh64/crange3-media.rd: Delete. * testsuite/ld-sh/sh64/crange3.dd: Delete. * testsuite/ld-sh/sh64/crange3.rd: Delete. * testsuite/ld-sh/sh64/crangerel1.rd: Delete. * testsuite/ld-sh/sh64/crangerel2.rd: Delete. * testsuite/ld-sh/sh64/dlsection-1.s: Delete. * testsuite/ld-sh/sh64/dlsection.sd: Delete. * testsuite/ld-sh/sh64/endian.dbd: Delete. * testsuite/ld-sh/sh64/endian.dld: Delete. * testsuite/ld-sh/sh64/endian.ld: Delete. * testsuite/ld-sh/sh64/endian.s: Delete. * testsuite/ld-sh/sh64/endian.sbd: Delete. * testsuite/ld-sh/sh64/endian.sld: Delete. * testsuite/ld-sh/sh64/gotplt.d: Delete. * testsuite/ld-sh/sh64/gotplt.map: Delete. * testsuite/ld-sh/sh64/gotplt.s: Delete. * testsuite/ld-sh/sh64/init-cmpct.d: Delete. * testsuite/ld-sh/sh64/init-media.d: Delete. * testsuite/ld-sh/sh64/init.s: Delete. * testsuite/ld-sh/sh64/init64.d: Delete. * testsuite/ld-sh/sh64/mix1-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix1.sd: Delete. * testsuite/ld-sh/sh64/mix1.xd: Delete. * testsuite/ld-sh/sh64/mix2-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix2.sd: Delete. * testsuite/ld-sh/sh64/mix2.xd: Delete. * testsuite/ld-sh/sh64/rd-sh64.exp: Delete. * testsuite/ld-sh/sh64/rel-1.s: Delete. * testsuite/ld-sh/sh64/rel-2.s: Delete. * testsuite/ld-sh/sh64/rel32.xd: Delete. * testsuite/ld-sh/sh64/rel64.xd: Delete. * testsuite/ld-sh/sh64/relax.exp: Delete. * testsuite/ld-sh/sh64/relax1.s: Delete. * testsuite/ld-sh/sh64/relax2.s: Delete. * testsuite/ld-sh/sh64/relax3.s: Delete. * testsuite/ld-sh/sh64/relax4.s: Delete. * testsuite/ld-sh/sh64/reldl-1.s: Delete. * testsuite/ld-sh/sh64/reldl-2.s: Delete. * testsuite/ld-sh/sh64/reldl32.rd: Delete. * testsuite/ld-sh/sh64/reldl64.rd: Delete. * testsuite/ld-sh/sh64/relfail.exp: Delete. * testsuite/ld-sh/sh64/relfail.s: Delete. * testsuite/ld-sh/sh64/sh64-1.s: Delete. * testsuite/ld-sh/sh64/sh64-2.s: Delete. * testsuite/ld-sh/sh64/sh64.exp: Delete. * testsuite/ld-sh/sh64/shcmp-1.s: Delete. * testsuite/ld-sh/sh64/shdl-1.s: Delete. * testsuite/ld-sh/sh64/shdl-2.s: Delete. * testsuite/ld-sh/sh64/shdl32.xd: Delete. * testsuite/ld-sh/sh64/shdl64.sd: Delete. * testsuite/ld-sh/sh64/shdl64.xd: Delete. * testsuite/ld-sh/sh64/shmix-1.s: Delete. * testsuite/ld-sh/sh64/shmix-2.s: Delete. * testsuite/ld-sh/sh64/shmix-3.s: Delete. * testsuite/ld-sh/sh64/stobin-0-dso.d: Delete. * testsuite/ld-sh/sh64/stobin-1.d: Delete. * testsuite/ld-sh/sh64/stobin.s: Delete. * testsuite/ld-sh/sh64/stolib.s: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove w65 supportAlan Modra10-682/+12
include/ * coff/internal.h: Remove w65 support. * coff/w65.h: Delete. bfd/ * Makefile.am: Remove w65 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-w65.c: Delete. * cpu-w65.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove w65 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * w65-dis.c: Delete. * w65-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove w65 support. ld/ * Makefile.am: Remove w65 support. * configure.tgt: Likewise. * emulparams/w65.sh: Delete. * scripttempl/w65.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove we32k supportAlan Modra3-2/+5
include/ * coff/we32k.h: Delete. bfd/ * Makefile.am: Remove we32k support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-we32k.c: Delete. * cpu-we32k.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * configure.ac: Remove we32k support. * configure: Regenerate. bintuils/ * testsuite/binutils-all/objdump.exp: Remove we32k support.
2018-04-16Remove m88k supportAlan Modra9-775/+11
include/ * coff/internal.h: Remove m88k support. * coff/m88k.h: Delete. * opcode/m88k.h: Delete. bfd/ * Makefile.am: Remove m88k support. * aoutx.h: Likewise. * archures.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-ns32k.c: Likewise. * elf32-nds32.c: Likewise. * mach-o.c: Likewise. * netbsd-core.c: Likewise. * reloc.c: Likewise. * targets.c: Likewise. * coff-m88k.c: Delete. * cpu-m88k.c: Delete. * elf32-m88k.c: Delete. * hosts/m88kmach3.h: Delete. * m88kmach3.c: Delete. * m88kopenbsd.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove m88k support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * m88k-dis.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * MAINTAINERS (Mark Kettenis): Move to past maintainers. * testsuite/binutils-all/objdump.exp: Remove m88k support. gas/ * configure.ac: Remove m88k support. * config.in: Regenerate. * configure: Regenerate. ld/ * Makefile.am: Remove m88k support. * configure.host: Likewise. * configure.tgt: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * emulparams/m88kbcs.sh: Delete. * scripttempl/m88kbcs.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove i370 supportAlan Modra10-1113/+12
include/ * elf/i370.h: Delete. * opcode/i370.h: Delete. bfd/ * Makefile.am: Remove i370 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * cpu-i370.c: Delete. * elf32-i370.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove i370 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * i370-dis.c: Delete. * i370-opc.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * readelf.c: Remove i370 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * Makefile.am: Remove i370 support. * app.c: Likewise. * config/obj-elf.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Likewise. * testsuite/gas/elf/warn-2.s: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * config/tc-i370.c: Delete. * config/tc-i370.h: Delete. * doc/c-i370.texi: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove i370 support. * configure.tgt: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * emulparams/elf32i370.sh: Delete. * scripttempl/elfi370.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove h8500 supportAlan Modra10-4199/+12
include/ * coff/h8500.h: Delete. * coff/internal.h: Remove h8500 support. bfd/ * Makefile.am: Remove h8500 support. * archures.c: Likewise. * coffcode.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * coff-h8500.c: Delete. * cpu-h8500.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove h8500 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * h8500-dis.c: Delete. * h8500-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove h8500 support. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/obj-coff.h: Remove h8500 support. ld/ * Makefile.am: Remove h8500 support. * configure.tgt: Likewise. * emulparams/h8500.sh: Delete. * emulparams/h8500b.sh: Delete. * emulparams/h8500c.sh: Delete. * emulparams/h8500m.sh: Delete. * emulparams/h8500s.sh: Delete. * scripttempl/h8500.sc: Delete. * scripttempl/h8500b.sc: Delete. * scripttempl/h8500c.sc: Delete. * scripttempl/h8500m.sc: Delete. * scripttempl/h8500s.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove tahoe supportAlan Modra3-2/+5
include/ * opcode/tahoe.h: Delete. bfd/ * archures.c: Remove tahoe support. * config.bfd: Likewise. * configure.ac: Likewise. * hosts/tahoe.h: Delete. * bfd-in2.h: Regenerate. * configure: Regenerate. opcodes/ * configure.ac: Remove tahoe support. * configure: Regenerate. binutils/ * testsuite/binutils-all/objdump.exp: Remove tahoe support. gprof/ * Makefile.am: Remove tahoe support. * corefile.c: Likewise. * tahoe.c: Delete. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate.
2018-04-15x86: Allow 32-bit registers for tpause and umwaitH.J. Lu4-38/+16
Since only the first 32 bits of input operand are used for tpause and umwait, the REX.W bit is skipped. Both 32-bit registers and 64-bit registers are allowed. gas/ * testsuite/gas/i386/x86-64-waitpkg.s: Add 32-bit registers tests for tpause and umwait. * testsuite/gas/i386/x86-64-waitpkg-intel.d: Updated. * testsuite/gas/i386/x86-64-waitpkg.d: Likewise. opcodes/ * i386-dis.c (prefix_table): Replace Em with Edq on tpause and umwait. * i386-opc.tbl: Allow 32-bit registers for tpause and umwait in 64-bit mode. * i386-tbl.h: Regenerated.
2018-04-11Enable Intel WAITPKG instructions.Igor Tsimbalist7-5248/+5402
Intel has disclosed a set of new instructions for Tremont processor. The spec is https://software.intel.com/en-us/intel-architecture-instruction-set-extensions-programming-reference This patch enables Intel WAITPKG instructions. gas/ * config/tc-i386.c (cpu_arch): Add WAITPKG. (cpu_noarch): Likewise. * doc/c-i386.texi: Document WAITPKG. * i386/i386.exp: Run WAITPKG tests. * testsuite/gas/i386/waitpkg-intel.d: New test. * testsuite/gas/i386/waitpkg.d: Likewise. * testsuite/gas/i386/waitpkg.s: Likewise. * testsuite/gas/i386/x86-64-waitpkg-intel.d: Likewise. * testsuite/gas/i386/x86-64-waitpkg.d: Likewise. * testsuite/gas/i386/x86-64-waitpkg.s: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_MOD_0_0FAE_REG_6, PREFIX_MOD_1_0FAE_REG_6. (va_mode): New. (OP_E_register): Use va_mode. * i386-dis-evex.h (prefix_table): New instructions (see prefixes above). * i386-gen.c (cpu_flag_init): Add WAITPKG. (cpu_flags): Likewise. * i386-opc.h (enum): Likewise. (i386_cpu_flags): Likewise. * i386-opc.tbl: Add umonitor, umwait, tpause. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra10-1244/+12
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-04i386: Clear vex instead of vex.evexH.J. Lu2-6/+8
"vex" has many fields to control how to decode an instruction. Clear all fields in "vex" before decoding an instruction to avoid using values left from the previous instruction. gas/ PR binutils/23025 * testsuite/gas/i386/prefix.s: Add tests for vcvtpd2dq with VEX and EVEX prefixes. * testsuite/gas/i386/prefix.d: Updated. opcodes/ PR binutils/23025 * i386-dis.c (get_valid_dis386): Don't set vex.prefix nor vex.w to 0. (print_insn): Clear vex instead of vex.evex.
2018-04-04Update Spanish translations for ld/ opcodes/ and gold/ sub-directoriesNick Clifton2-381/+1048
2018-03-28x86: drop VecESizeJan Beulich5-7936/+7936
It again can be inferred from other information. The vpopcntd templates all need to have Dword added to their memory operands; the lack thereof was actually a bug preventing certain Intel syntax code to assemble, so test cases get extended.
2018-03-28x86: convert broadcast insn attribute to booleanJan Beulich4-1981/+1979
The (only) valid broadcast type for an insn can be inferred from other information.
2018-03-28x86: fold to-scalar-int conversion insnsJan Beulich3-487/+83
2018-03-28x86: don't show suffixes for to-scalar-int conversion insnsJan Beulich2-24/+20
In the course of folding their patterns (possible now that the pointless and partly even bogus VecESize are no longer in the way) I've noticed that vcvt*2usi, other than their vcvt*2si counterparts, don't allow for any suffixes. As that is supposedly intentional, make the disassembler consistently omit suffixes for all to-scalar-int conversion insns.
2018-03-28Enhance the AARCH64 assembler to support LDFF1xx instructions which use ↵Nick Clifton6-571/+646
REG+REG addressing with an assumed offset register. PR 22988 opcode * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_SVE_ADDR_R. opcodes * aarch64-tbl.h (aarch64_opcode_table): Add entries for LDFF1xx instructions with only a base address register. * aarch64-opc.c (operand_general_constraint_met_p): Add code to handle AARHC64_OPND_SVE_ADDR_R. (aarch64_print_operand): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64_dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas * config/tc-aarch64.c (parse_operands): Add code to handle AARCH64_OPN_SVE_ADDR_R. * testsuite/gas/aarch64/sve.s: Add tests for LDFF1xx instructions with an assumed XZR offset address register. * testsuite/gas/aarch64/sve.d: Update expected disassembly.
2018-03-22x86: drop pointless VecESizeJan Beulich3-952/+958
The attribute is meaningful only in templates allowing embedded broadcast. Drop them everywhere else.
2018-03-22x86: drop remaining redundant DispNJan Beulich2-75/+81
A few of them were missed in commit 7ac2002247 ("x86: derive DispN from BaseIndex") and also couldn't be removed by subsequent commits touching certain templates anyway.
2018-03-22x86: fix swapped operand handling for BNDMOVJan Beulich4-7/+23
The wrong placement of the Load attribute in the templates prevented this from working. The disassembler also didn't handle this consistently with other similar dual-encoding insns.
2018-03-22x86/Intel: fix fallout from earlier template foldingJan Beulich3-25/+122
While many templates allowing multiple suitably matching XMM/YMM/ZMM operand sizes can be folded, a few need to be split in order to not wrongly accept "xmmword ptr" operands when only XMM registers are permitted (and memory operands are more narrow). Add a test case validating this.
2018-03-22x86: fold a few XOP templatesJan Beulich3-236/+50
Also add a new test case verifying that mixed operands of SIMD insns with a size-less memory operand in the middle are properly rejected.
2018-03-14RISC-V: Add .insn support.Jim Wilson2-0/+78
gas/ChangeLog 2018-03-07 Kito Cheng <kito.cheng@gmail.com> * config/tc-riscv.c (opcode_name_list): New. (opcode_names_hash): Likewise. (init_opcode_names_hash): Likewise. (opcode_name_lookup): Likewise. (validate_riscv_insn): New argument length, and add new format which used in .insn directive. (md_begin): Refine hash table initialization logic into init_opcode_hash. (init_opcode_hash): New. (my_getOpcodeExpression): Parse opcode name for .insn. (riscv_ip): New argument hash, able to handle .insn directive. (s_riscv_insn): Handler for .insn directive. (riscv_pseudo_table): New entry for .insn. * doc/c-riscv.texi: Add documentation for .insn directive. * testsuite/gas/riscv/insn.d: Add testcase for .insn directive. * testsuite/gas/riscv/insn.s: Likewise. include/ChangeLog 2018-03-07 Kito Cheng <kito.cheng@gmail.com> * opcode/riscv.h (OP_MASK_FUNCT3): New. (OP_SH_FUNCT3): Likewise. (OP_MASK_FUNCT7): Likewise. (OP_SH_FUNCT7): Likewise. (OP_MASK_OP2): Likewise. (OP_SH_OP2): Likewise. (OP_MASK_CFUNCT4): Likewise. (OP_SH_CFUNCT4): Likewise. (OP_MASK_CFUNCT3): Likewise. (OP_SH_CFUNCT3): Likewise. (riscv_insn_types): Likewise. opcodes/ChangeLog 2018-03-07 Kito Cheng <kito.cheng@gmail.com> * riscv-opc.c (riscv_insn_types): New.
2018-03-13Updated Russian and Brazilian Portuguese translations.Nick Clifton2-3/+7
ld * po/pt_BR.po: Updated Brazilian Portuguese translation. opcodes * po/pt_BR.po: Updated Brazilian Portuguese translation. gas * po/ru.po: Updated Russian translation.
2018-03-08x86-64: Also optimize "clr reg64"H.J. Lu3-2/+7
"clr reg" is an alias of "xor reg, reg". We can encode "clr reg64" as "xor reg32, reg32". gas/ * config/tc-i386.c (optimize_encoding): Also encode "clr reg64" as "xor reg32, reg32". * testsuite/gas/i386/x86-64-optimize-1.s: Add "clr reg64" tests. * testsuite/gas/i386/x86-64-optimize-1.d: Updated. opcodes/ * i386-opc.tbl: Add Optimize to clr. * i386-tbl.h: Regenerated.
2018-03-08x86: Remove support for old (<= 2.8.1) versions of gccH.J. Lu5-5237/+5098
Old (<= 2.8.1) versions of gcc generate broken fsubp, fsubrp, fdivp and fdivrp instructions. Assembler translates them to correct ones with a warning: [hjl@gnu-cfl-1 gas]$ cat x.s fsubp %st(3),%st [hjl@gnu-cfl-1 gas]$ gcc -c x.s x.s: Assembler messages: x.s:1: Warning: translating to `fsubp %st,%st(3)' [hjl@gnu-cfl-1 gas]$ This patch removes support for old (<= 2.8.1) versions of gcc: [hjl@gnu-cfl-1 gas]$ ./as-new -o x.o x.s x.s: Assembler messages: x.s:1: Error: operand type mismatch for `fsubp' [hjl@gnu-cfl-1 gas]$ gas/ * NEWS: Mention -mold-gcc removal. * config/tc-i386.c (i386_error): Remove old_gcc_only. (old_gcc): Removed. (match_template): Remove old gcc support. (OPTION_MOLD_GCC): Removed. (OPTION_MRELAX_RELOCATIONS): Updated. (md_longopts): Remove OPTION_MOLD_GCC. (md_parse_option): Likewise. (md_show_usage): Remove -mold-gcc. * testsuite/gas/i386/general.s: Convert fsub/fdiv tests for old (<= 2.8.1) versions of gcc. * testsuite/gas/i386/intel.s: Likewise. * testsuite/gas/i386/general.l: Updated. * testsuite/gas/i386/intel-intel.d: Likewise. * testsuite/gas/i386/intel.d: Likewise. * testsuite/gas/i386/intel.e: Likewise. * testsuite/gas/i386/i386.exp: Don't pass -mold-gcc to general. include/ * opcode/i386 (OLDGCC_COMPAT): Removed. opcodes/ * i386-gen.c (opcode_modifiers): Remove OldGcc. * i386-opc.h (OldGcc): Removed. (i386_opcode_modifier): Remove oldgcc. * i386-opc.tbl: Remove fsubp, fsubrp, fdivp and fdivrp instructions for old (<= 2.8.1) versions of gcc. * i386-tbl.h: Regenerated.
generated by cgit v1.1 at 2024-07-12 16:21:12 +0000