aboutsummaryrefslogtreecommitdiff
path: root/opcodes/mips16-opc.c
AgeCommit message (Collapse)AuthorFilesLines
2024-01-04Update year range in copyright notice of binutils filesAlan Modra1-1/+1
Adds two new external authors to etc/update-copyright.py to cover bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then updates copyright messages as follows: 1) Update cgen/utils.scm emitted copyrights. 2) Run "etc/update-copyright.py --this-year" with an extra external author I haven't committed, 'Kalray SA.', to cover gas testsuite files (which should have their copyright message removed). 3) Build with --enable-maintainer-mode --enable-cgen-maint=yes. 4) Check out */po/*.pot which we don't update frequently.
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-03-31Use bool in opcodesAlan Modra1-20/+20
cpu/ * frv.opc: Replace bfd_boolean with bool, FALSE with false, and TRUE with true throughout. opcodes/ * sysdep.h (POISON_BFD_BOOLEAN): Define. * aarch64-asm-2.c, * aarch64-asm.c, * aarch64-asm.h, * aarch64-dis-2.c, * aarch64-dis.c, * aarch64-dis.h, * aarch64-gen.c, * aarch64-opc.c, * aarch64-opc.h, * arc-dis.c, * arc-dis.h, * arc-fxi.h, * arc-opc.c, * arm-dis.c, * bfin-dis.c, * cris-dis.c, * csky-dis.c, * csky-opc.h, * dis-buf.c, * disassemble.c, * frv-opc.c, * frv-opc.h, * h8300-dis.c, * i386-dis.c, * m68k-dis.c, * metag-dis.c, * microblaze-dis.c, * microblaze-dis.h, * micromips-opc.c, * mips-dis.c, * mips-formats.h, * mips-opc.c, * mips16-opc.c, * mmix-dis.c, * msp430-dis.c, * nds32-dis.c, * nfp-dis.c, * nios2-dis.c, * ppc-dis.c, * riscv-dis.c, * score-dis.c, * score7-dis.c, * tic6x-dis.c, * v850-dis.c, * vax-dis.c, * wasm32-dis.c, * xtensa-dis.c: Replace bfd_boolean with bool, FALSE with false, and TRUE with true throughout.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2018-02-20MIPS16/opcodes: Free up `M' operand codeMaciej W. Rozycki1-2/+1
The `M' and `m' MIPS16 operand codes are functionally the same, denoting a 7-bit register list that is encoded the same way for both SAVE and RESTORE. Use `m' for both instructions then, making `M' available for a different use. opcodes/ * mips16-opc.c (decode_mips16_operand) <'M'>: Remove case. (mips16_opcodes): Replace `M' with `m' for "restore". include/ * opcode/mips.h: Remove `M' operand code.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-06-28MIPS: Add Imagination interAptiv MR2 MIPS32r3 processor supportMaciej W. Rozycki1-0/+6
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with the MIPS16e2 ASE as per documentation, including in particular: 1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW MIPS16e2 instructions[1], for assembly and disassembly, 2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE regular MIPS instructions[2], for assembly and disassembly, 3. ELF binary file annotation for the interAptiv MR2 MIPS architecture extension. 4. Support for interAptiv MR2 architecture selection for assembly, in the form of the `-march=interaptiv-mr2' command-line option and its corresponding `arch=interaptiv-mr2' setting for the `.set' and `.module' pseudo-ops. 5. Support for interAptiv MR2 architecture selection for disassembly, in the form of the `mips:interaptiv-mr2' target architecture, for use e.g. with the `-m' command-line option for `objdump'. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 interAptiv Multiprocessing System Software User's Manual", Imagination Technologies Ltd., Document Number: MD00904, Revision 02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific Instructions", pp. 878-883 [2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917 include/ * elf/mips.h (E_MIPS_MACH_IAMR2): New macro. (AFL_EXT_INTERAPTIV_MR2): Likewise. * opcode/mips.h: Document new operand codes defined. (INSN_INTERAPTIV_MR2): New macro. (INSN_CHIP_MASK): Adjust accordingly. (CPU_INTERAPTIV_MR2): New macro. (cpu_is_member) <CPU_INTERAPTIV_MR2>: New case. (MIPS16_ALL_ARGS): Rename to... (MIPS_SVRS_ALL_ARGS): ... this. (MIPS16_ALL_STATICS): Rename to... (MIPS_SVRS_ALL_STATICS): ... this. bfd/ * archures.c (bfd_mach_mips_interaptiv_mr2): New macro. * cpu-mips.c (I_interaptiv_mr2): New enum value. (arch_info_struct): Add "mips:interaptiv-mr2" entry. * elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New case. (mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise. (bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. (mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and `bfd_mach_mips_interaptiv_mr2' entries. * bfd-in2.h: Regenerate. opcodes/ * mips-formats.h (INT_BIAS): New macro. (INT_ADJ): Redefine in INT_BIAS terms. * mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry. (mips_print_save_restore): New function. (print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment. (validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort' call. (print_insn_args): Handle OP_SAVE_RESTORE_LIST. (print_mips16_insn_arg): Call `mips_print_save_restore' for OP_SAVE_RESTORE_LIST handling, factored out from here. * mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case. (RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros. (mips_builtin_opcodes): Add "restore" and "save" entries. * mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases. (IAMR2): New macro. (mips16_opcodes): Add "copyw" and "ucopyw" entries. binutils/ * readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. * NEWS: Mention Imagination interAptiv MR2 processor support. gas/ * config/tc-mips.c (validate_mips_insn): Handle OP_SAVE_RESTORE_LIST specially. (mips_encode_save_restore, mips16_encode_save_restore): New functions. (match_save_restore_list_operand): Factor out SAVE/RESTORE operand insertion into the instruction word or halfword to these new functions. (mips_cpu_info_table): Add "interaptiv-mr2" entry. * doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the `-march=' argument list.
2017-05-15MIPS16e2: Add MIPS16e2 ASE supportMaciej W. Rozycki1-0/+98
Add MIPS16e2 ASE support as per the architecture specification[1], including in particular: 1. A new ELF ASE flag to mark MIPS16e2 binaries. 2. MIPS16e2 instruction assembly support, including a relaxation update to use LUI rather than an LI/SLL instruction pair for loading the high part of 32-bit addresses. 3. MIPS16e2 instruction disassembly support, including updated rules for extended forms of instructions that are now subdecoded and therefore do not alias to the original MIPS16 ISA revision instructions even for encodings that are not valid in the MIPS16e2 instruction set. Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and `.module' pseudo-ops. Control the availability of the MT ASE subset of the MIPS16e2 instruction set with a combination of these controls and the preexisting MT ASE controls. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific Extension Technical Reference Manual", Imagination Technologies Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016 include/ * elf/mips.h (AFL_ASE_MIPS16E2): New macro. (AFL_ASE_MASK): Adjust accordingly. * opcode/mips.h: Document new operand codes defined. (mips_operand_type): Add OP_REG28 enum value. (INSN2_SHORT_ONLY): Update description. (ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros. bfd/ * elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry. (mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag. (print_insn_arg) <OP_REG28>: Add handler. (validate_insn_args) <OP_REG28>: Handle. (print_mips16_insn_arg): Handle MIPS16 instructions that require 32-bit encoding and 9-bit immediates. (print_insn_mips16): Handle MIPS16 instructions that require 32-bit encoding and MFC0/MTC0 operand decoding. * mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'> <'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers. (RD_C0, WR_C0, E2, E2MT): New macros. (mips16_opcodes): Add entries for MIPS16e2 instructions: GP-relative "addiu" and its "addu" spelling, "andi", "cache", "di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh", "lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0", "movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause", "pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw" instructions, "swl", "swr", "sync" and its "sync_acquire", "sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases, "xori", "dmt", "dvpe", "emt" and "evpe". Add split regular/extended entries for original MIPS16 ISA revision instructions whose extended forms are subdecoded in the MIPS16e2 ISA revision: "li", "sll" and "srl". binutils/ * readelf.c (print_mips_ases): Handle MIPS16e2 ASE. * NEWS: Mention MIPS16e2 ASE support. gas/ * config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag. (RELAX_MIPS16_E2): New macro. (RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO) (RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT) (RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT) (RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED) (RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED) (RELAX_MIPS16_MARK_ALWAYS_EXTENDED) (RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO) (RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits. (mips16_immed_extend): New prototype. (options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum values. (md_longopts): Add "mmips16e2" and "mno-mips16e2" options. (mips_ases): Add "mips16e2" entry. (mips_set_ase): Handle MIPS16e2 ASE. (insn_insert_operand): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (is_opcode_valid_16): Pass enabled ASE bitmask on to `opcode_is_member'. (validate_mips_insn): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (operand_reg_mask) <OP_REG28>: Add handler. (match_reg28_operand): New function. (match_operand) <OP_REG28>: Add handler. (append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE. (match_mips16_insn): Handle MIPS16 instructions that require 32-bit encoding and `V' and `u' operand codes. (mips16_ip): Allow any characters except from `.' in opcodes. (mips16_immed_extend): Handle 9-bit immediates. Do not shuffle immediates whose width is not one of these listed. (md_estimate_size_before_relax): Handle MIPS16e2 relaxation. (mips_relax_frag): Likewise. (md_convert_frag): Likewise. (mips_convert_ase_flags): Handle MIPS16e2 ASE. * doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and `-mno-mips16e2' options. (-mmips16e2, -mno-mips16e2): New options. * doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and `-mno-mips16e2' options. (MIPS ASE Instruction Generation Overrides): Add `.set mips16e2' and `.set nomips16e2'.
2017-05-12MIPS16/opcodes: Make the handling of BREAK and SDBBP consistentMaciej W. Rozycki1-1/+3
Disassemble the MIPS16 BREAK and SDBBP instruction's immediate operand in the hexadecimal rather than decimal numeral system and add respective operandless variants with an implicit 0 operand, making our handling of these instructions consistent with how we have processed their regular MIPS and microMIPS counterparts since forever. opcodes/ * mips16-opc.c (decode_mips16_operand) <'6'>: Switch the operand type to hexadecimal. (mips16_opcodes): Add operandless "break" and "sdbbp" entries. binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: Adjust BREAK and SDBBP disassembly. gas/ * testsuite/gas/mips/mips16.d: Adjust BREAK disassembly. * testsuite/gas/mips/mips16-64@mips16.d: Likewise. * testsuite/gas/mips/mips16-64.d: Likewise. * testsuite/gas/mips/mips16-64@mips16-64.d: Likewise. * testsuite/gas/mips/mips16-macro.d: Likewise. * testsuite/gas/mips/mips16-64@mips16-macro.d: Likewise. * testsuite/gas/mips/mips16-sub.d: Likewise. * testsuite/gas/mips/mips16-32@mips16-sub.d: Likewise.
2017-04-25MIPS16/opcodes: Annotate instruction aliasesMaciej W. Rozycki1-5/+7
Complement commit 986e18a5a9fd ("Add a second 'pinfo' member to mips_opcode to extend number of available bits"), <https://sourceware.org/ml/binutils/2005-01/msg00261.html>, and annotate MIPS16 NOP, LA, DLA and the synthetic forms of LD and LW instructions as aliases. These correspond to MOVE, and the PC-relative ADDIU, DADDIU, LD and LW hardware instructions respectively. binutils/ * testsuite/binutils-all/mips/mips16-alias.d: New test. * testsuite/binutils-all/mips/mips16-noalias.d: New test. * testsuite/binutils-all/mips/mips16-alias.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests. opcodes/ * mips16-opc.c (AL): New macro. (mips16_opcodes): Mark "nop", "la", "dla", and synthetic forms of "ld" and "lw" as aliases.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-23MIPS16: Add ASMACRO instruction supportMaciej W. Rozycki1-0/+9
Add ASMACRO instruction support as per the MIPS16e ASE architecture specifications [1][2], completing MIPS16e instruction set support. [1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65 [2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66 include/ * opcode/mips.h: Document `0', `1', `2', `3', `4' and `s' operand codes. opcodes/ * mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3', `4' and `s' operand codes. (mips16_opcodes): Add "asmacro" entry. binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: Update for ASMACRO support. gas/ * testsuite/gas/mips/mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test. * testsuite/gas/mips/mips16-asmacro.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests.
2016-12-23MIPS16: Simplify extended operand handlingMaciej W. Rozycki1-1/+1
Simplify extended operand handling and only specially process immediates which require bit shuffling, using the generic operand insertion and extraction handlers for the '<' (5-bit shift amount) operand code in particular. Require the least significant bit of all extended operand forms to be (artificially) set to 0 for their special processing to trigger. gas/ * config/tc-mips.c (mips16_immed): Limit `mips16_immed_extend' use to operands whose LSB position is zero. opcodes/ * mips-dis.c (print_mips16_insn_arg): Simplify processing of extended operands. * mips16-opc.c (decode_mips16_operand): Switch the extended form of the `<' operand type to LSB position 22.
2016-12-23MIPS16: Reassign `0' and `4' operand codesMaciej W. Rozycki1-15/+16
Replace `0' and `4' operand codes with `.' and `F' respectively to free up the `0'-`4' consecutive range. No functional change. gas/ * config/tc-mips.c (mips16_macro_build): Replace `0' and `4' operand codes with `.' and `F' respectively. (mips16_macro): Likewise. include/ * opcode/mips.h: Replace `0' and `4' operand codes with `.' and `F' respectively. opcodes/ * mips16-opc.c (decode_mips16_operand): Replace `0' and `4' operand codes with `.' and `F' respectively. (mips16_opcodes): Likewise.
2016-12-23MIPS16: Handle non-extensible instructions correctlyMaciej W. Rozycki1-68/+70
Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23MIPS16: Remove "extended" BREAK/SDBBP handlingMaciej W. Rozycki1-2/+1
Remove special casing for the `6' operand code used for the embedded trap code of the BREAK and the SDBBP instructions to support supposedly extended forms of these instructions. According to all versions of the MIPS16 ASE specifications these instructions are not extensible [1][2][3][4][5][7][8][10][11], and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [5][6][9][10]. Therefore supposedly extended BREAK and SDBBP instructions do not serve their purpose anymore as they do not cause a Bp and a Debug exception respectively and supporting these forms in disassembly only causes confusion. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] same, Table 18. "Extendable MIPS16 Instructions", p. 24 [4] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Table 3.8 "MIPS16e Special Instructions", p. 38 [5] same, Section 3.11 "MIPS16e Extensible Instructions, p. 41 [6] same, Table 3.15 "MIPS16e Extensible Instructions", p. 41 [7] same, Table 3.24 "MIPS16e RR Encoding of the Funct Field", p. 49 [8] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Table 1.8 "MIPS16e Special Instructions", p. 39 [9] same, Section 1.11 "MIPS16e Extensible Instructions", p. 42 [10] same, Table 1.15 "MIPS16e Extensible Instructions", pp. 42-43 [11] same, Table 1.24 "MIPS16e RR Encoding of the Funct Field", p. 50 gas/ * config/tc-mips.c (match_mips16_insn): Remove the `6' operand code special case and its associated comment. opcodes/ * mips16-opc.c (decode_mips16_operand) <'6'>: Remove extended encoding support.
2016-12-23MIPS16/GAS: Disallow EXTEND delay-slot schedulingMaciej W. Rozycki1-1/+1
Do not allow any explicitly coded EXTEND instruction to be automatically scheduled into a jump delay slot, as an EXTEND prefix is coupled with the next regular MIPS16 instruction and therefore swapping it with a jump would change program's semantics; EXTEND is not architecturally allowed to be present in a jump delay slot anyway. opcodes/ * mips16-opc.c (mips16_opcodes): Set NODS in `pinfo' for "extend". gas/ * testsuite/gas/mips/mips16-extend-swap.d: New test. * testsuite/gas/mips/mips16-extend-swap.s: New test source. * testsuite/gas/mips/mips.exp: Run the new test.
2016-12-20MIPS16: Switch to 32-bit opcode table interpretationMaciej W. Rozycki1-3/+5
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to how the microMIPS opcode table is handled, for both the `match' and `mask' fields, removing special casing for JAL and JALX instructions and their `a' and `i' operand codes throughout, while retaining automatic processing of extendable opcodes in assembly and disassembly. In assembly disallow size enforcement suffixes as appropriate: `.t' for both 32-bit instructions and macros and `.e' for macros only, making macro handling consistent with the microMIPS instruction set. In disassembly fully decode EXTEND prefixes prepended to unsupported instruction encodings (according to the ISA selection) rather than dumping them as hexadecimal data along with the following instruction, removing all special casing for the EXTEND prefix and making its handling rely on its opcode table entry, except where it is considered a part of an extendable instruction. include/ * opcode/mips.h (mips_opcode_32bit_p): New inline function. gas/ * config/tc-mips.c (micromips_insn_length): Use `mips_opcode_32bit_p'. (is_size_valid): Adjust description. (is_size_valid_16): New function. (validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16 operand decoding. (validate_mips16_insn): Remove `a' and `i' operand code special casing, use `mips_opcode_32bit_p' to determine instruction width. (append_insn): Adjust forced MIPS16 instruction size determination. (match_mips16_insn): Likewise. Don't shift the instruction's opcode with the `a' and `i' operand codes. Use `mips_opcode_32bit_p' in operand decoding. (match_mips16_insns): Check for forced instruction size's validity. (mips16_ip): Don't force instruction size in the `noautoextend' mode. * testsuite/gas/mips/mips16-jal-e.d: New test. * testsuite/gas/mips/mips16-jal-t.d: New test. * testsuite/gas/mips/mips16-macro-e.d: New test. * testsuite/gas/mips/mips16-macro-t.d: New test. * testsuite/gas/mips/mips16-jal-t.l: New stderr output. * testsuite/gas/mips/mips16-macro-e.l: New stderr output. * testsuite/gas/mips/mips16-macro-t.l: New stderr output. * testsuite/gas/mips/mips16-jal-e.s: New test source. * testsuite/gas/mips/mips16-jal-t.s: New test source. * testsuite/gas/mips/mips16-macro-e.s: New test source. * testsuite/gas/mips/mips16-macro-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_mips16_insn_arg): Always handle `extend' and `insn' together, with `extend' as the high-order 16 bits. (match_kind): New enum. (print_insn_mips16): Rework for 32-bit instruction matching. Do not dump EXTEND prefixes here. * mips16-opc.c (mips16_opcodes): Move "extend" entry to the end. Recode `match' and `mask' fields as 32-bit in absolute "jal" and "jalx" entries. binutils/ * testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust test for separate EXTEND prefix disassembly.
2016-12-20MIPS16/opcodes: Correct 64-bit macros' ISA membershipMaciej W. Rozycki1-6/+6
Limit the DDIV, DDIVU, DREM, DREMU and DSUBU macros to the MIPS III rather than MIPS I ISA. These macros expand to machine code sequences including 64-bit instructions which require a 64-bit ISA. Entries for those instructions are already correctly marked, however the marking is ignored if entries are used in the process of macro expansion rather than directly, making it possible to indirectly produce 64-bit machine code even when output requested has been limited to a 32-bit ISA. opcodes/ * mips16-opc.c (mips16_opcodes): Set membership to I3 rather than I1 for the "ddiv", "ddivu", "drem", "dremu" and "dsubu" INSN_MACRO entries. gas/ * testsuite/gas/mips/mips16-macro.l: New list test. * testsuite/gas/mips/mips.exp: Run the new test.
2016-12-20MIPS16/opcodes: Correct I64/SDRASP opcode's ISA membershipMaciej W. Rozycki1-1/+1
Limit the `SD ra, offset(sp)' instruction (I64/SDRASP major/minor opcode) to the MIPS III rather than MIPS I ISA. This is a 64-bit instruction requiring a 64-bit ISA. This bug has been there since forever. opcodes/ * mips16-opc.c (mips16_opcodes): Set membership to I3 rather than I1 for the SP-relative "sd"/$ra entry (SDRASP minor opcode). gas/ * testsuite/gas/mips/mips16-sdrasp.d: New test. * testsuite/gas/mips/mips16-sdrasp.l: New stderr output. * testsuite/gas/mips/mips16-sdrasp.s: New test source. * testsuite/gas/mips/mips.exp: Run the new test.
2016-12-14MIPS16: Fix SP-relative SD instruction annotationMaciej W. Rozycki1-2/+2
Fix the annotation of SP-relative SD instructions incorrectly marked as reading from the PC rather than SP, which in turn prevented their 16-bit forms from being scheduled into jump delay slots. This bug has been there since forever. opcodes/ * mips16-opc.c (mips16_opcodes): Set RD_SP rather than RD_PC in `pinfo2' with SP-relative "sd" entries. gas/ * testsuite/gas/mips/mips16-sprel-swap.d: New test. * testsuite/gas/mips/mips16-sprel-swap.s: New test source. * testsuite/gas/mips/mips.exp: Run the new test.
2016-12-14MIPS16/opcodes: Fix and clarify MIPS16e commentaryMaciej W. Rozycki1-4/+4
Correct the note about JALRC/JRC being compact jumps rather than branches, and add a reference from where the remaining MIPS16e additions live and the jumps used to be too, complementing commit ceb94aa50d68 ("Update insn_mo when converting to a MIPS16e compact jump"), <https://sourceware.org/ml/binutils/2011-06/msg00369.html>. opcodes/ * mips16-opc.c (mips16_opcodes): Update comments on MIPS16e compact jumps.
2016-12-09MIPS16: Remove unused `>' operand codeMaciej W. Rozycki1-2/+0
This code has never been used throughout the repository history, and likely not before either, as due to the assymetry of MIPS16 instruction set encoding there are no 32-bit shift operations having their immediate shift count placed in the position of the usual `rx' instruction field. gas/ * config/tc-mips.c (mips16_macro_build) <'>'>: Remove case. include/ * opcode/mips.h: Remove references to `>' operand code. opcodes/ * mips16-opc.c (decode_mips16_operand) <'>'>: Remove cases.
2016-12-09MIPS16/opcodes: Use hexadecimal interpretation for the `e' operand codeMaciej W. Rozycki1-1/+1
Make the `e' operand code used with raw EXTEND instructions use the hexadecimal rather than decimal format, for consistency with what is actually produced by code in `print_insn_mips16' dedicated to EXTEND disassembly. Due to that special handling the operand code is only interpreted for assembly however, which accepts either format either way, so there is no functional change here. opcodes/ * mips16-opc.c (decode_mips16_operand) <'e'>: Use HINT rather than UINT. gas/ * testsuite/gas/mips/mips16-extend.d: New test. * testsuite/gas/mips/mips16-extend.s: New test source. * testsuite/gas/mips/mips.exp: Run the new test.
2016-12-07MIPS16/opcodes: Update opcode table commentMaciej W. Rozycki1-1/+1
opcodes/ * mips16-opc.c (mips16_opcodes): Update comment naming structure members.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-03-05Update copyright yearsAlan Modra1-2/+1
2013-08-19include/opcode/Richard Sandiford1-2/+2
* mips.h (OP_OPTIONAL_REG): New mips_operand_type. (mips_optional_operand_p): New function. opcodes/ * mips-formats.h (OPTIONAL_REG, OPTIONAL_MAPPED_REG): New macros. * micromips-opc.c (decode_micromips_operand): Use OPTIONAL_REG and OPTIONAL_MAPPED_REG. * mips-opc.c (decode_mips_operand): Likewise. * mips16-opc.c (decode_mips16_operand): Likewise. * mips-dis.c (print_insn_arg): Handle OP_OPTIONAL_REG. gas/ * config/tc-mips.c (operand_reg_mask, match_operand): Handle OP_OPTIONAL_REG. (mips_ip, mips16_ip): Use mips_optional_operand_p to check for optional operands.
2013-08-03include/opcode/Richard Sandiford1-6/+6
* mips.h (mips_pcrel_operand): Inherit from mips_int_operand. (mips_int_operand_min, mips_int_operand_max): New functions. (mips_decode_pcrel_operand): Use mips_decode_int_operand. opcodes/ * mips-formats.h (PCREL): Reorder parameters and update the definition to match new mips_pcrel_operand layout. (JUMP, JALX, BRANCH): Update accordingly. * mips16-opc.c (decode_mips16_operand): Likewise. gas/ * config/tc-mips.c (match_int_operand): Use mips_int_operand_min and mips_int_operand_max. (mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED): Delete. (mips16_immed_operand, mips16_immed_in_range_p): New functions. (mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand instead of mips16_immed_operand.
2013-08-01include/opcode/Richard Sandiford1-127/+129
* mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01include/opcode/Richard Sandiford1-39/+40
* mips.h (MIPS16_INSN_WRITE_SP, MIPS16_INSN_READ_31) (MIPS16_INSN_READ_PC, MIPS16_INSN_UNCOND_BRANCH) (MIPS16_INSN_COND_BRANCH): Delete. opcodes/ * mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags. (WR_SP): Replace with... (MOD_SP): ...this. (mips16_opcodes): Update accordingly. * mips-dis.c (print_insn_mips16): Likewise. gas/ * config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same flags for MIPS16 and non-MIPS16 instructions. (gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block. (gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too. (gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling. (can_swap_branch_p, get_append_method): Use the same flags for MIPS16 and non-MIPS16 instructions. Fix formatting.
2013-08-01opcodes/Richard Sandiford1-172/+172
* mips16-opc.c (mips16_opcodes): Reformat.
2013-07-14opcodes/Richard Sandiford1-173/+173
* Makefile.am (mips-opc.lo, micromips-opc.lo, mips16-opc.lo): Remove special rules. * Makefile.in: Regenerate. * mips-opc.c, micromips-opc.c, mips16-opc.c: Explicitly initialize all fields. Reformat.
2013-07-14include/opcode/Richard Sandiford1-0/+110
* mips.h (mips_operand_type): Add OP_ENTRY_EXIT_LIST and OP_SAVE_RESTORE_LIST. (decode_mips16_operand): Declare. opcodes/ * mips16-opc.c: Include mips-formats.h. (reg_0_map, reg_29_map, reg_31_map, reg_m16_map, reg32r_map): New static arrays. (decode_mips16_operand): New function. * mips-dis.c (mips16_to_32_reg_map, mips16_reg_names): Delete. (print_insn_arg): Handle OP_ENTRY_EXIT list. Abort for OP_SAVE_RESTORE_LIST. (print_mips16_insn_arg): Change interface. Use mips_operand structures. Delete GET_OP_S. Move GET_OP definition to... (print_insn_mips16): ...here. Call init_print_arg_state. Update the call to print_mips16_insn_arg.
2013-07-14include/opcode/Richard Sandiford1-14/+14
* mips.h: Document MIPS16 "I" opcode. opcodes/ * mips16-opc.c (mips16_opcodes): Use "I" for immediate operands in macros. gas/ * config/tc-mips.c (mips16_ip): Handle "I".
2013-07-07opcodes/Richard Sandiford1-0/+2
* mips16-opc.c: Add entries for argumentless "entry" and "exit" instructions. gas/testsuite/ * gas/mips/mips16.d, gas/mips/mips16-64.d: Remove trailing whitespace from ENTRY and EXIT lines.
2013-07-07include/opcode/Richard Sandiford1-1/+1
* mips.h: Document "+i". opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for "jalx". * mips16-opc.c (mips16_opcodes): Likewise. * micromips-opc.c (micromips_opcodes): Likewise. * mips-dis.c (print_insn_args, print_mips16_insn_arg) (print_insn_mips16): Handle "+i". (print_insn_micromips): Likewise. Conditionally preserve the ISA bit for "a" but not for "+i". gas/ * config/tc-mips.c (validate_mips_insn, validate_micromips_insn): (mips_ip, mips16_ip): Handle "+i".
2012-05-17 PR 14072Nick Clifton1-2/+2
* configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * alpha-opc.c: Include sysdep.h before any other header file. * alpha-dis.c: Likewise. * avr-dis.c: Likewise. * cgen-opc.c: Likewise. * cr16-dis.c: Likewise. * cris-dis.c: Likewise. * crx-dis.c: Likewise. * d10v-dis.c: Likewise. * d10v-opc.c: Likewise. * d30v-dis.c: Likewise. * d30v-opc.c: Likewise. * h8500-dis.c: Likewise. * i370-dis.c: Likewise. * i370-opc.c: Likewise. * m10200-dis.c: Likewise. * m10300-dis.c: Likewise. * micromips-opc.c: Likewise. * mips-opc.c: Likewise. * mips61-opc.c: Likewise. * moxie-dis.c: Likewise. * or32-opc.c: Likewise. * pj-dis.c: Likewise. * ppc-dis.c: Likewise. * ppc-opc.c: Likewise. * s390-dis.c: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Likewise. * sparc-dis.c: Likewise. * sparc-opc.c: Likewise. * spu-dis.c: Likewise. * tic30-dis.c: Likewise. * tic54x-dis.c: Likewise. * tic80-dis.c: Likewise. * tic80-opc.c: Likewise. * tilegx-dis.c: Likewise. * tilepro-dis.c: Likewise. * v850-dis.c: Likewise. * v850-opc.c: Likewise. * vax-dis.c: Likewise. * w65-dis.c: Likewise. * xgate-dis.c: Likewise. * xtensa-dis.c: Likewise. * rl78-decode.opc: Likewise. * rl78-decode.c: Regenerate. * rx-decode.opc: Likewise. * rx-decode.c: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * sysdep.h: Generate an error if included before config.h. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * bfd-in.h: Generate an error if included before config.h. * sysdep.h: Likewise. * bfd-in2.h: Regenerate. * compress.c: Remove #include "config.h". * plugin.c: Likewise. * elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h. * elf64-hppa.c: Likewise. * som.c: Likewise. * xsymc.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * aclocal.m4: Regenerate. * Makefile.am: Use wrappers around C files generated by flex. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * itbl-lex-wrapper.c: New file. * config/bfin-lex-wrapper.c: New file. * cgen.c: Include as.h before setjmp.h. * config/tc-dlx.c: Include as.h before any other header. * config/tc-h8300.c: Likewise. * config/tc-lm32.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-or32.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-xtensa.c: Likewise. * configure.in: Add check that sysdep.h has been included before any system header files. * configure: Regenerate. * config.in: Regenerate. * unwind-ia64.h: Include config.h.
2011-07-24include/opcode/Richard Sandiford1-7/+8
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> * mips.h (INSN_TRAP): Rename to... (INSN_NO_DELAY_SLOT): ... this. (INSN_SYNC): Remove macro. gas/ 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> * config/tc-mips.c (can_swap_branch_p): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC as well as explicit checks for ERET and DERET when scheduling branch delay slots. opcodes/ 2011-07-24 Maciej W. Rozycki <macro@codesourcery.com> * mips-opc.c (NODS): New macro. (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT. (DSP_VOLA): Likewise. (mips_builtin_opcodes): Add NODS annotation to "deret" and "eret". Replace INSN_SYNC with NODS throughout. Use NODS in place of TRAP for "wait", "waiti" and "yield". * mips16-opc.c (NODS): New macro. (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT. (mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc", "restore" and "save".
2011-06-29gas/Richard Sandiford1-4/+7
* config/tc-mips.c (find_altered_mips16_opcode): New function. (append_insn): Use it. opcodes/ * mips16-opc.c (jalrc, jrc): Move earlier in file.
2010-07-06 gas/Maciej W. Rozycki1-10/+11
* config/tc-mips.c (nops_for_insn_or_target): Replace MIPS16_INSN_BRANCH with MIPS16_INSN_UNCOND_BRANCH and MIPS16_INSN_COND_BRANCH. include/opcode/ * mips.h (MIPS16_INSN_UNCOND_BRANCH): New macro. (MIPS16_INSN_BRANCH): Rename to... (MIPS16_INSN_COND_BRANCH): ... this. opcodes/ * mips-dis.c (print_mips16_insn_arg): Remove branch instruction type and delay slot determination. (print_insn_mips16): Extend branch instruction type and delay slot determination to cover all instructions. * mips16-opc.c (BR): Remove macro. (UBR, CBR): New macros. (mips16_opcodes): Update branch annotation for "b", "beqz", "bnez", "bteqz" and "btnez". Add branch annotation for "jalrc" and "jrc".
2009-09-02update copyright datesAlan Modra1-1/+2
2007-07-05Change source files over to GPLv3.Nick Clifton1-14/+14
2006-05-14 [ gas/ChangeLog ]Thiemo Seufer1-134/+136
* config/tc-mips.c (macro_build): Test for currently active mips16 option. (mips16_ip): Reject invalid opcodes. [ opcodes/ChangeLog ] * mips16-opc.c (I1, I32, I64): New shortcut defines. (mips16_opcodes): Change membership of instructions to their lowest baseline ISA. [ gas/testsuite/ChangeLog ] * gas/mips/mips.exp: Run new tests. * gas/mips/mips16e.s, gas/mips/mips16e.d, gas/mips/mips16e-64.s, gas/mips/mips16e-64.d, gas/mips/mips16e-64.l: New tests.
2006-05-04[ gas/testsuite/ChangeLog ]Thiemo Seufer1-0/+2
2006-05-04 Thiemo Seufer <ths@mips.com> Nigel Stephens <nigel@mips.com> * gas/mips/mips.exp: Run mips32-dsp tests only for mips32r2. * gas/mips/set-arch.d: Adjust according to opcode table changes. [ include/opcode/ChangeLog ] 2006-05-04 Thiemo Seufer <ths@mips.com> Nigel Stephens <nigel@mips.com> David Ung <davidu@mips.com> * mips.h: Add INSN_SMARTMIPS define. [ opcodes/ChangeLog ] 2006-05-04 Thiemo Seufer <ths@mips.com> Nigel Stephens <nigel@mips.com> David Ung <davidu@mips.com> * mips-dis.c (mips_arch_choices): Add smartmips instruction decoding to MIPS32 and MIPS32R2. Limit DSP decoding to release 2 ISAs. Add MIPS3D decoding to MIPS32R2. Add MT decoding to MIPS64R2. * mips-opc.c: fix random typos in comments. (INSN_SMARTMIPS): New defines. (mips_builtin_opcodes): Add paired single support for MIPS32R2. Move bc3f, bc3fl, bc3t, bc3tl downwards. Move flushi, flushd, flushid, wb upwards. Move cfc3, ctc3 downwards. Rework the FP_S and FP_D flags to denote single and double register accesses separately. Move dmfc3, dmtc3, mfc3, mtc3 downwards. Allow jr.hb and jalr.hb for release 1 ISAs. Allow luxc1, suxc1 for MIPS32R2. Add SmartMIPS instructions. Add two-argument variants of bc2f, bc2fl, bc2t, bc2tl. Add mfhc2, mthc2 to release 2 ISAs. * mips16-opc.c (mips16_opcodes): Add sdbbp instruction.
2005-11-14 * mips.h: Assign 'm'/'M' codes to MIPS16e save/restoreThiemo Seufer1-0/+2
instructions. Define MIPS16_ALL_ARGS and MIPS16_ALL_STATICS for save/restore encoding of the args field. * mips16-opc.c: Add MIPS16e save/restore opcodes. * mips-dis.c (print_mips16_insn_arg): Handle printing of 'm'/'M' codes for save/restore. * config/tc-mips.c (mips16_ip): Add handling of 'm' and 'M' codes for the MIPS16e save/restore instructions. * gas/mips/mips.exp: Run new save/restore tests. * gas/testsuite/gas/mips/mips16e-save.s: New test for generating different styles of save/restore instructions. * gas/testsuite/gas/mips/mips16e-save.d: New.
generated by cgit v1.1 at 2024-11-19 14:06:13 +0000