aboutsummaryrefslogtreecommitdiff
path: root/opcodes/aarch64-opc-2.c
AgeCommit message (Collapse)AuthorFilesLines
2024-07-12aarch64: Add support for sme2.1 movaz instructions.Srinath Parvathaneni1-0/+1
This patch adds support for following sme2.1 movaz instructions and the spec is available here [1]. 1. MOVAZ (array to vector, two registers). 2. MOVAZ (array to vector, four registers). 3. MOVAZ (tile to vector, single). [1]: https://developer.arm.com/documentation/ddi0602/2024-03/SME-Instructions?lang=en
2024-07-08aarch64: Add support for sve2p1 pmov instruction.srinath1-0/+8
This patch adds support for followign SVE2p1 instruction, spec is available here [1]. 1. PMOV (to vector) 2. PMOV (to predicate) Both pmov (to vector) and pmov (to predicate) have destination scalable vector register and source scalable vector register respectively as an operand with no suffix and optional index. To handle this case we have added 8 new operands in this patch. AARCH64_OPND_SVE_Zn0_INDEX, /* Zn[index], bits [9:5]. */ AARCH64_OPND_SVE_Zn1_17_INDEX, /* Zn[index], bits [9:5,17]. */ AARCH64_OPND_SVE_Zn2_18_INDEX, /* Zn[index], bits [9:5,18:17]. */ AARCH64_OPND_SVE_Zn3_22_INDEX, /* Zn[index], bits [9:5,18:17,22]. */ AARCH64_OPND_SVE_Zd0_INDEX, /* Zn[index], bits [4:0]. */ AARCH64_OPND_SVE_Zd1_17_INDEX, /* Zn[index], bits [4:0,17]. */ AARCH64_OPND_SVE_Zd2_18_INDEX, /* Zn[index], bits [4:0,18:17]. */ AARCH64_OPND_SVE_Zd3_22_INDEX, /* Zn[index], bits [4:0,18:17,22]. */ Since the index of the <Zd> operand is optional, the index part is dropped in disassembly in both the cases of "no index" or "zero index". As per spec: PMOV <Zd>{[<imm>]}, <Pn>.D PMOV <Pn>.D, <Zd>{[<imm>]} Example1: Assembly: pmov z5[0], p6.d Disassembly: pmov z5, p6.d Assembly: pmov z5, p6.d Disassembly: pmov z5, p6.d Example2: Assembly: pmov p4.b, z5[0] Disassembly: pmov p4.b, z5 Assembly: pmov p4.b, z5 Disassembly: pmov p4.b, z5 [1]: https://developer.arm.com/documentation/ddi0602/2024-03/SVE-Instructions?lang=en
2024-06-25aarch64: Fix sve2p1 ld[1-4]/st[1-4]q instruction operands.Srinath Parvathaneni1-3/+1
This patch fixes encoding and syntax for sve2p1 instructions ld[1-4]q/st[1-4]q as mentioned below, for the issues reported here. https://sourceware.org/pipermail/binutils/2024-February/132408.html 1) Previously all the ld[1-4]q/st[1-4]q instructions are wrongly added as predicated instructions and this issue is fixed in this patch by replacing "SVE2p1_INSNC" with "SVE2p1_INSN" macro. 2) Wrong first operand in all the ld[1-4]q/st[1-4]q instructions is fixed by replacing "SVE_Zt" with "SVE_ZtxN". 3) Wrong operand qualifiers in ld1q and st1q instructions are also fixed in this patch. 4) In ld1q/st1q the index in the second argument is optional and if index is xzr and is skipped in the assembly, the index field is ignored by the disassembler. Fixing above mentioned issues helps with following: 1) ld1q and st1q first register operand accepts enclosed figure braces. 2) ld2q, ld3q, ld4q, st2q, st3q, and st4q instructions accepts wrapping sequence of vector registers. For the instructions ld[2-4]q/st[2-4]q, tests for wrapping sequence of vector registers are added along with short-form of operands for non-wrapping sequence. I have added test using following logic: ld2q {Z0.Q, Z1.Q}, p0/Z, [x0, #0, MUL VL] //raw insn encoding (all zeroes) ld2q {Z31.Q, Z0.Q}, p0/Z, [x0, #0, MUL VL] // encoding of <Zt1> ld2q {Z0.Q, Z1.Q}, p7/Z, [x0, #0, MUL VL] // encoding of <Pg> ld2q {Z0.Q, Z1.Q}, p0/Z, [x30, #0, MUL VL] // encoding of <Xm> ld2q {Z0.Q, Z1.Q}, p0/Z, [x0, #-16, MUL VL] // encoding of <imm> (low value) ld2q {Z0.Q, Z1.Q}, p0/Z, [x0, #14, MUL VL] // encoding of <imm> (high value) ld2q {Z31.Q, Z0.Q}, p7/Z, [x30, #-16, MUL VL] // encoding of all fields (all ones) ld2q {Z30.Q, Z31.Q}, p1/Z, [x3, #-2, MUL VL] // random encoding. For all the above form of instructions the hyphenated form is preferred for disassembly if there are more than two registers in the list, and the register numbers are monotonically increasing in increments of one.
2024-06-25aarch64: Fix sve2p1 extq instruction operands.Srinath Parvathaneni1-1/+1
This patch fixes the syntax of sve2p1 "extq" instruction by modifying the operands count to 4. A new operand AARCH64_OPND_SVE_UIMM4 is defined to handle the 4th argument an 4-bit unsigned immediate of extq instruction. The instruction encoding is updated to use constraint C_SCAN_MOVPRFX, to enable "extq" instruction to immediately precede in program order by a MOVPRFX instruction. Also removed the unused operand AARCH64_OPND_SVE_Zm_imm4. This issues was reported here: https://sourceware.org/pipermail/binutils/2024-February/132408.html
2024-06-25aarch64: Fix sve2p1 dupq instruction operands.Srinath Parvathaneni1-2/+2
This patch fixes the syntax of sve2p1 "dupq" instruction by modifying the way 2nd operand does the encoding and decoding using the [<imm>] value. dupq makes use of already existing aarch64_ins_sve_index and aarch64_ext_sve_index inserter and extractor functions. The definitions of aarch64_ins_sve_index_imm (inserter) and aarch64_ext_sve_index_imm (extractor) is removed in this patch. This issues was reported here: https://sourceware.org/pipermail/binutils/2024-February/132408.html
2024-06-24aarch64: Add SME FP8 multiplication instructionsAndrew Carlotti1-0/+5
This includes: - FEAT_SME_F8F32 (+sme-f8f32) - FEAT_SME_F8F16 (+sme-f8f16) The FP16 addition/subtraction instructions originally added by FEAT_SME_F16F16 haven't been added to Binutils yet. They are also required to be enabled if FEAT_SME_F8F16 is present, so they are included in this patch.
2024-06-24aarch64: Add FP8 Neon and SVE multiplication instructionsAndrew Carlotti1-0/+2
This includes all the instructions under the following features: - FEAT_FP8FMA (+fp8fma) - FEAT_FP8DOT4 (+fp8dot4) - FEAT_FP8DOT2 (+fp8dot2) - FEAT_SSVE_FP8FMA (+ssve-fp8fma) - FEAT_SSVE_FP8DOT4 (+ssve-fp8dot4) - FEAT_SSVE_FP8DOT2 (+ssve-fp8dot2)
2024-06-24gas, aarch64: Add SME2 lutv2 extensionsaurabh.jha@arm.com1-0/+3
Introduces instructions for the SME2 lutv2 extension for AArch64. They are documented in the following document: * ARM DDI0602 For both luti4 instructions, we introduced an operand called SME_Znx2_BIT_INDEX. We use the existing function parse_vector_reg_list for parsing but modified that function so that it can accept operands without qualifiers and rejects instructions that have operands with qualifiers but are not supposed to have operands with qualifiers. For disassembly, we modified print_register_list so that it could accept register lists without qualifiers. For one luti4 instruction, we introduced a SME_Zdnx4_STRIDED. It is similar to SME_Ztx4_STRIDED and we could use existing code for parsing, encoding, and disassembly. For movt instruction, we introduced an operand called SME_ZT0_INDEX2_12. This is a ZT0 register with a bit index encoded in [13:12]. It is similar to SME_ZT0_INDEX. We also introduced an iclass named sme_size_12_b so that we can encode size bits [13:12] correctly when only 'b' is allowed as qualifier.
2024-06-12aarch64: add Branch Record Buffer extension instructionsClaudio Bantaloukas1-8/+10
The FEAT_BRBE extension provides two aliases of sys: - brb iall (Invalidates all Branch records in the Branch Record Buffer) - brb inj (Injects the Branch Record held in BRBINFINJ_EL1, BRBSRCINJ_EL1, and BRBTGTINJ_EL1 into the Branch Record Buffer) This patch adds: - the feature option "brbe" that must be added for the aliases to be available - a new operand flag AARCH64_OPND_Rt_IN_SYS_ALIASES that warns in a comment when Rt is set to the non default value 0b11111 (it is constrained unpredictable whether the instruction is undefined or behaves as if the Rt field is set to 0b11111). - a new operand flag AARCH64_OPND_BRBOP that encodes and decodes Op2 values from bit 5 - support for the two brb aliases above See: - https://developer.arm.com/documentation/ddi0602/2024-03/Base-Instructions/BRB--Branch-Record-Buffer--an-alias-of-SYS-?lang=en - https://developer.arm.com/documentation/ddi0601/2024-03/AArch64-Instructions/BRB-INJ--Branch-Record-Injection-into-the-Branch-Record-Buffer?lang=en - https://developer.arm.com/documentation/ddi0601/2024-03/AArch64-Instructions/BRB-IALL--Invalidate-the-Branch-Record-Buffer?lang=en
2024-05-28gas, aarch64: Add SVE2 lut extensionsaurabh.jha@arm.com1-0/+3
Introduces instructions for the SVE2 lut extension for AArch64. They are documented in the following links: * luti2: https://developer.arm.com/documentation/ddi0602/2024-03/SVE-Instructions/LUTI2--Lookup-table-read-with-2-bit-indices-?lang=en * luti4: https://developer.arm.com/documentation/ddi0602/2024-03/SVE-Instructions/LUTI4--Lookup-table-read-with-4-bit-indices-?lang=en These instructions use new SVE2 vector operands. They are called SVE_Zm1_23_INDEX, SVE_Zm2_22_INDEX, and Zm3_12_INDEX and they have 1 bit, 2 bit, and 3 bit indices respectively. The lsb and width of these new operands are the same as many existing operands but the convention is to give different names to fields that serve different purpose so we introduced new fields in aarch64-opc.c and aarch64-opc.h. We made a design choice for the second operand of the halfword variant of luti4 with two register tables. We could have either defined a new operand, like SVE_Znx2, or we could have use the existing operand SVE_ZnxN. With the new operand, we would need to implement constraints on register lists based on either operand or opcode flag. With existing operand, we could just existing constraint checks using opcode flag. We chose the second approach and went with SVE_ZnxN and added opcode flag to enforce lengths of vector register list operands. This way, we can reuse the existing constraint check logic.
2024-05-28gas, aarch64: Add AdvSIMD lut extensionsaurabh.jha@arm.com1-0/+4
Introduces instructions for the Advanced SIMD lut extension for AArch64. They are documented in the following links: * luti2: https://developer.arm.com/documentation/ddi0602/2024-03/SIMD-FP-Instructions/LUTI2--Lookup-table-read-with-2-bit-indices-?lang=en * luti4: https://developer.arm.com/documentation/ddi0602/2024-03/SIMD-FP-Instructions/LUTI4--Lookup-table-read-with-4-bit-indices-?lang=en These instructions needed definition of some new operands. We will first discuss operands for the third operand of the instructions and then discuss a vector register list operand needed for the second operand. The third operands are vectors with bit indices and without type qualifiers. They are called Em_INDEX1_14, Em_INDEX2_13, and Em_INDEX3_12 and they have 1 bit, 2 bit, and 3 bit indices respectively. For these new operands, we defined new parsing case branch. The lsb and width of these operands are the same as many existing but the convention is to give different names to fields that serve different purpose so we introduced new fields in aarch64-opc.c and aarch64-opc.h for these new operands. For the second operand of these instructions, we introduced a new operand called LVn_LUT. This represents a vector register list with stride 1. We defined new inserter and extractor for this new operand and it is encoded in FLD_Rn. We are enforcing the number of registers in the reglist using opcode flag rather than operand flag as this is what other SIMD vector register list operands are doing. The disassembly also uses opcode flag to print the correct number of registers.
2024-03-19gas, aarch64: Add faminmax extensionSaurabh Jha1-15/+15
2024-03-18Regenerate AArch64 opcodes filesNick Clifton1-0/+1
2024-01-15aarch64: rcpc3: Regenerate aarch64-*-2.c filesVictor Do Nascimento1-15/+20
2024-01-15Add generated source files and fix thinko in aarch64-asm.cNick Clifton1-0/+13
2024-01-09aarch64: Regenerate aarch64-*-2.c filesVictor Do Nascimento1-9/+12
2024-01-04Update year range in copyright notice of binutils filesAlan Modra1-1/+1
Adds two new external authors to etc/update-copyright.py to cover bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then updates copyright messages as follows: 1) Update cgen/utils.scm emitted copyrights. 2) Run "etc/update-copyright.py --this-year" with an extra external author I haven't committed, 'Kalray SA.', to cover gas testsuite files (which should have their copyright message removed). 3) Build with --enable-maintainer-mode --enable-cgen-maint=yes. 4) Check out */po/*.pot which we don't update frequently.
2023-12-19aarch64: Add FEAT_SPECRES2 supportAndrea Corallo1-8/+8
This patch add supports for FEAT_SPECRES2 "Enhanced speculation restriction instructions" adding the "cosp" instruction. This is mandatory v8.9-a/v9.4-a and optional v8.0-a+/v9.0-a+. It is enabled by the +predres2 march flag.
2023-11-07aarch64: Add LSE128 instructionsVictor Do Nascimento1-15/+17
Implement, together with the necessary tests, the following new LSE128 atomic instructions: * Atomic bit clear on quadword in memory (ldclrp{a|l|al}); * Atomic bit set on quadword in memory (ldsetp{a|l|al}); * Swap quadword in memory (swpp{a|l|al}); gas/ChangeLog: * testsuite/gas/aarch64/lse128-atomic.d: New. * testsuite/gas/aarch64/lse128-atomic.s: Likewise. opcodes/ChangeLog: * aarch64-tbl.h (ldclrp): new _LSE128_INSN entry. (ldclrpa): Likewise. (ldclrpal): Likewise. (ldclrpl): Likewise. (ldsetp): Likewise. (ldsetpa): Likewise. (ldsetpal): Likewise. (ldsetpl): Likewise. (swpp): Likewise. (swppa): Likewise. (swppal): Likewise. (swppl): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise.
2023-11-02aarch64: Add support for GCSB DSYNC instruction.Srinath Parvathaneni1-9/+10
This patch adds support for Guarded control stack data synchronization instruction (GCSB DSYNC). This instruction is allocated to existing HINT space and uses the HINT number 19 and to match this an entry is added to the aarch64_hint_options array.
2023-11-02aarch64: Add support for GCS extension.srinath1-8/+9
This patch adds for Guarded Control Stack Extension (GCS) extension. GCS feature is optional from Armv9.4-A architecture and enabled by passing +gcs option to -march (eg: -march=armv9.4-a+gcs) or using ".arch_extension gcs" directive in the assembly file. Also this patch adds support for GCS instructions gcspushx, gcspopcx, gcspopx, gcsss1, gcsss2, gcspushm, gcspopm, gcsstr and gcssttr.
2023-03-30aarch64: Add the RPRFM instructionRichard Sandiford1-0/+1
This patch adds the RPRFM (range prefetch) instruction. It was introduced as part of SME2, but it belongs to the prefetch hint space and so doesn't require any specific ISA flags. The aarch64_rprfmop_array initialiser (deliberately) only fills in the leading non-null elements.
2023-03-30aarch64: Add new SVE dot-product instructionsRichard Sandiford1-1/+2
This patch adds the SVE FDOT, SDOT and UDOT instructions, which are available when FEAT_SME2 is implemented. The patch also reorders the existing SVE_Zm3_22_INDEX to keep the operands numerically sorted.
2023-03-30aarch64: Add the SME2 shift instructionsRichard Sandiford1-0/+2
There are two instruction formats here: - SQRSHR, SQRSHRU and UQRSHR, which operate on lists of two or four registers. - SQRSHRN, SQRSHRUN and UQRSHRN, which operate on lists of four registers. These are the first SME2 instructions to have immediate operands. The patch makes sure that, when parsing SME2 instructions with immediate operands, the new predicate-as-counter registers are parsed as registers rather than as #-less immediates.
2023-03-30aarch64: Add the SME2 MLALL and MLSLL instructionsRichard Sandiford1-0/+5
SMLALL, SMLSLL, UMLALL and UMLSLL have the same format. USMLALL and SUMLALL allow the same operand types as those instructions, except that SUMLALL does not have the multi-vector x multi-vector forms (which would be redundant with USMLALL).
2023-03-30aarch64: Add the SME2 MLAL and MLSL instructionsRichard Sandiford1-0/+4
The {BF,F,S,U}MLAL and {BF,F,S,U}MLSL instructions share the same encoding. They are the first instance of a ZA (as opposed to ZA tile) operand having a range of offsets. As with ZA tiles, the expected range size is encoded in the operand-specific data field.
2023-03-30aarch64: Add the SME2 FMLA and FMLS instructionsRichard Sandiford1-0/+2
2023-03-30aarch64: Add the SME2 ADD and SUB instructionsRichard Sandiford1-0/+1
Add support for the SME2 ADD. SUB, FADD and FSUB instructions. SUB and FSUB have the same form as ADD and FADD, except that ADD also has a 2-operand accumulating form. The 64-bit ADD/SUB instructions require FEAT_SME_I16I64 and the 64-bit FADD/FSUB instructions require FEAT_SME_F64F64. These are the first instructions to have tied register list operands, as opposed to tied single registers. The parse_operands change prevents unsuffixed Z registers (width==-1) from being treated as though they had an Advanced SIMD-style suffix (.4s etc.). It means that: Error: expected element type rather than vector type at operand 2 -- `add za\.s\[w8,0\],{z0-z1}' becomes: Error: missing type suffix at operand 2 -- `add za\.s\[w8,0\],{z0-z1}'
2023-03-30aarch64: Add the SME2 ZT0 instructionsRichard Sandiford1-0/+9
SME2 adds lookup table instructions for quantisation. They use a new lookup table register called ZT0. LUTI2 takes an unsuffixed SVE vector index of the form Zn[<imm>], which is the first time that this syntax has been used.
2023-03-30aarch64: Add the SME2 predicate-related instructionsRichard Sandiford1-0/+10
Implementation-wise, the main things to note here are: - the WHILE* instructions have forms that return a pair of predicate registers. This is the first time that we've had lists of predicate registers, and they wrap around after register 15 rather than after register 31. - the predicate-as-counter WHILE* instructions have a fourth operand that specifies the vector length. We can treat this as an enumeration, except that immediate values aren't allowed. - PEXT takes an unsuffixed predicate index of the form PN<n>[<imm>]. This is the first instance of a vector/predicate index having no suffix.
2023-03-30aarch64: Add the SME2 multivector LD1 and ST1 instructionsRichard Sandiford1-0/+3
SME2 adds LD1 and ST1 variants for lists of 2 and 4 registers. The registers can be consecutive or strided. In the strided case, 2-register lists have a stride of 8, starting at register x0xxx. 4-register lists have a stride of 4, starting at register x00xx. The instructions are predicated on a predicate-as-counter register in the range pn8-pn15. Although we already had register fields with upper bounds of 7 and 15, this is the first plain register operand to have a nonzero lower bound. The patch uses the operand-specific data field to record the minimum value, rather than having separate inserters and extractors for each lower bound. This in turn required adding an extra bit to the field.
2023-03-30aarch64: Add the SME2 MOVA instructionsRichard Sandiford1-0/+8
SME2 defines new MOVA instructions for moving multiple registers to and from ZA. As with SME, the instructions are also available through MOV aliases. One notable feature of these instructions (and many other SME2 instructions) is that some register lists must start at a multiple of the list's size. The patch uses the general error "start register out of range" when this constraint isn't met, rather than an error specifically about multiples. This ensures that the error is consistent between these simple consecutive lists and later strided lists, for which the requirements aren't a simple multiple.
2023-03-30aarch64: Add support for predicate-as-counter registersRichard Sandiford1-6/+11
SME2 adds a new format for the existing SVE predicate registers: predicates as counters rather than predicates as masks. In assembly code, operands that interpret predicates as counters are written pn<N> rather than p<N>. This patch adds support for these registers and extends some existing instructions to support them. Since the new forms are just a programmer convenience, there's no need to make them more restrictive than the earlier predicate-as-mask forms.
2023-03-30aarch64: Add _off4 suffix to AARCH64_OPND_SME_ZA_arrayRichard Sandiford1-1/+1
SME2 adds various new fields that are similar to AARCH64_OPND_SME_ZA_array, but are distinguished by the size of their offset fields. This patch adds _off4 to the name of the field that we already have.
2023-03-30aarch64: Add a _10 suffix to FLD_imm3Richard Sandiford1-1/+1
SME2 adds various new 3-bit immediate fields, so this patch adds an lsb position suffix to the name of the field that we already have.
2023-03-30aarch64: Regularise FLD_* suffixesRichard Sandiford1-16/+16
Some FLD_imm* suffixes used a counting scheme such as FLD_immN, FLD_immN_2, FLD_immN_3, etc., while others used the lsb as the suffix. The latter seems more mnemonic, and was a big help in doing the SME2 work. Similarly, the _10 suffix on FLD_SME_size_10 was nonobvious. Presumably it indicated a 2-bit field, but it actually starts in bit 22.
2023-03-30aarch64: Add an operand class for SVE register listsRichard Sandiford1-2/+2
SVE register lists were classified as SVE_REG, since there had been no particular reason to separate them out. However, some SME2 instructions have tied register list operands, and so we need to distinguish registers and register lists when checking whether two operands match. Also, the register list operands used a general error message, even though we already have a dedicated error code for register lists that are the wrong length.
2023-03-30aarch64: Move ZA range checks to aarch64-opc.cRichard Sandiford1-4/+4
This patch moves the range checks on ZA vector select offsets from gas to libopcodes. Doing the checks there means that the error messages contain the expected range. It also fits in better with the error severity scheme, which becomes important later. (This is because out-of-range indices are treated as more severe than syntax errors, on the basis that parsing must have succeeded if we get to the point of checking the completed opcode.) The patch also adds a new check_za_access function for checking ZA accesses. That's a bit over the top for one offset check, but the function becomes more complex with later patches. sme-9-illegal.s checked for an invalid .q suffix using: psel p1, p15, p3.q[w15] but this is doubly invalid because it misses the immediate part of the index. The patch keeps that test but adds another with a zero index, so that .q is the only thing wrong. The aarch64-tbl.h change includes neatening up the backslash positions.
2023-03-30aarch64: Treat ZA as a registerRichard Sandiford1-1/+1
We already treat the ZA tiles ZA0-ZA15 as registers. This patch does the same for ZA itself. parse_sme_zero_mask can then parse ZA tiles and ZA in the same way, through parsed_type_reg. One important effect of going through parsed_type_reg (in general) is that it allows ZA to take qualifiers. This is necessary for many SME2 instructions. However, to support existing unqualified uses of ZA, parse_reg_with_qual needs to treat the qualiier as optional. Hopefully the net effect is to give better error messages, since now that SME2 makes "za.<T>" valid in some contexts, it might be natural to use it (incorrectly) in ZERO too. While there, the patch also tweaks the error messages for invalid ZA tiles, to try to make some cases more specific. For now, parse_sme_za_array just uses parse_reg, rather than parse_typed_reg/parse_reg_with_qual. A later patch consolidates the parsing further.
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-11-14aarch64: Add support for Common Short Sequence Compression extensionAndre Vieira1-0/+2
This patch adds support for the CSSC extension and its corresponding instructions: ABS, CNT, CTZ, SMAX, UMAX, SMIN, UMIN. gas/ChangeLog: * config/tc-aarch64.c (parse_operands): Handle new operand types. * doc/c-aarch64.texi: Document new extension. * testsuite/gas/aarch64/cssc.d: New test. * testsuite/gas/aarch64/cssc.s: New test. include/ChangeLog: * opcode/aarch64.h (AARCH64_FEATURE_CSSC): New feature Macro. (enum aarch64_opnd): New operand types. (enum aarch64_insn_class): New instruction class. opcodes/ChangeLog: * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. * aarch64-opc.c (operand_general_constraint_met_p): Update for new operand types. (aarch64_print_operand): Likewise. * aarch64-opc.h (enum aarch64_field_kind): Declare FLD_CSSC_imm8 field. * aarch64-tbl.h (aarch64_feature_cssc): Define new feature set. (CSSC): Define new feature set Macro. (CSSC_INSN): Define new instruction type. (aarch64_opcode_table): Add new instructions.
2022-10-05Arm64: support CLEARBHB aliasJan Beulich1-8/+8
While the Arm v8 ARM (rev I-a) still doesn't mention this alias, it is (typically via a macro) already in use in kernels and alike.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-12-02aarch64: Add support for +mopsRichard Sandiford1-0/+3
This patch adds support for FEAT_MOPS, an Armv8.8-A extension that provides memcpy and memset acceleration instructions. I took the perhaps controversial decision to generate the individual instruction forms using macros rather than list them out individually. This becomes useful with a follow-on patch to check that code follows the correct P/M/E sequence. [https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions?lang=en] include/ * opcode/aarch64.h (AARCH64_FEATURE_MOPS): New macro. (AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_MOPS. (AARCH64_OPND_MOPS_ADDR_Rd): New aarch64_opnd. (AARCH64_OPND_MOPS_ADDR_Rs): Likewise. (AARCH64_OPND_MOPS_WB_Rn): Likewise. opcodes/ * aarch64-asm.h (ins_x0_to_x30): New inserter. * aarch64-asm.c (aarch64_ins_x0_to_x30): New function. * aarch64-dis.h (ext_x0_to_x30): New extractor. * aarch64-dis.c (aarch64_ext_x0_to_x30): New function. * aarch64-tbl.h (aarch64_feature_mops): New feature set. (aarch64_feature_mops_memtag): Likewise. (MOPS, MOPS_MEMTAG, MOPS_INSN, MOPS_MEMTAG_INSN) (MOPS_CPY_OP1_OP2_PME_INSN, MOPS_CPY_OP1_OP2_INSN, MOPS_CPY_OP1_INSN) (MOPS_CPY_INSN, MOPS_SET_OP1_OP2_PME_INSN, MOPS_SET_OP1_OP2_INSN) (MOPS_SET_INSN): New macros. (aarch64_opcode_table): Add MOPS instructions. (aarch64_opcode_table): Add entries for AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn. * aarch64-opc.c (aarch64_print_operand): Handle AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn. (verify_three_different_regs): New function. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. gas/ * doc/c-aarch64.texi: Document +mops. * config/tc-aarch64.c (parse_x0_to_x30): New function. (parse_operands): Handle AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn. (aarch64_features): Add "mops". * testsuite/gas/aarch64/mops.s, testsuite/gas/aarch64/mops.d: New test. * testsuite/gas/aarch64/mops_invalid.s, * testsuite/gas/aarch64/mops_invalid.d, * testsuite/gas/aarch64/mops_invalid.l: Likewise.
2021-11-17aarch64: [SME] SVE2 instructions added to support SMEPrzemyslaw Wirkus1-0/+1
This patch is adding new SVE2 instructions added to support SME extension. The following SVE2 instructions are added by the SME architecture: * PSEL, * REVD, SCLAMP and UCLAMP. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_pred_reg_with_index): New parser. (parse_operands): New parser. * testsuite/gas/aarch64/sme-9-illegal.d: New test. * testsuite/gas/aarch64/sme-9-illegal.l: New test. * testsuite/gas/aarch64/sme-9-illegal.s: New test. * testsuite/gas/aarch64/sme-9.d: New test. * testsuite/gas/aarch64/sme-9.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_SME_PnT_Wm_imm. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index): New inserter. * aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index): New extractor. * aarch64-opc.c (aarch64_print_operand): Printout of OPND_SME_PnT_Wm_imm. * aarch64-opc.h (enum aarch64_field_kind): New bitfields FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl. * aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier. (OP_SVE_QMQ): New qualifier. (struct aarch64_opcode): New instructions PSEL, REVD, SCLAMP and UCLAMP. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.
2021-11-17aarch64: [SME] Add SME mode selection and state access instructionsPrzemyslaw Wirkus1-9/+10
This patch is adding new SME mode selection and state access instructions: * Add SMSTART and SMSTOP instructions. * Add SVCR system register. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_sm_za): New parser. (parse_operands): New parser. * testsuite/gas/aarch64/sme-8-illegal.d: New test. * testsuite/gas/aarch64/sme-8-illegal.l: New test. * testsuite/gas/aarch64/sme-8-illegal.s: New test. * testsuite/gas/aarch64/sme-8.d: New test. * testsuite/gas/aarch64/sme-8.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_SME_SM_ZA. (enum aarch64_insn_class): New instruction classes sme_start and sme_stop. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_pstatefield): New inserter. (aarch64_ins_sme_sm_za): New inserter. * aarch64-dis.c (aarch64_ext_imm): New extractor. (aarch64_ext_pstatefield): New extractor. (aarch64_ext_sme_sm_za): New extractor. * aarch64-opc.c (operand_general_constraint_met_p): New pstatefield value for SME instructions. (aarch64_print_operand): Printout for OPND_SME_SM_ZA. (SR_SME): New register SVCR. * aarch64-opc.h (F_REG_IN_CRM): New register endcoding. * aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding. (PSTATE_ENCODE_CRM): Encode CRm field. (PSTATE_DECODE_CRM): Decode CRm field. (PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field. (PSTATE_DECODE_CRM_IMM): Decode CRm immediate field. (PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate field. * aarch64-tbl.h (struct aarch64_opcode): New SMSTART and SMSTOP instructions. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.
2021-11-17aarch64: [SME] Add LD1x, ST1x, LDR and STR instructionsPrzemyslaw Wirkus1-0/+4
This patch is adding new loads and stores defined by SME instructions. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_address): New parser. (parse_sme_za_hv_tiles_operand_with_braces): New parser. (parse_sme_za_array): New parser. (output_operand_error_record): Print error details if present. (parse_operands): Support new operands. * testsuite/gas/aarch64/sme-5-illegal.d: New test. * testsuite/gas/aarch64/sme-5-illegal.l: New test. * testsuite/gas/aarch64/sme-5-illegal.s: New test. * testsuite/gas/aarch64/sme-5.d: New test. * testsuite/gas/aarch64/sme-5.s: New test. * testsuite/gas/aarch64/sme-6-illegal.d: New test. * testsuite/gas/aarch64/sme-6-illegal.l: New test. * testsuite/gas/aarch64/sme-6-illegal.s: New test. * testsuite/gas/aarch64/sme-6.d: New test. * testsuite/gas/aarch64/sme-6.s: New test. * testsuite/gas/aarch64/sme-7-illegal.d: New test. * testsuite/gas/aarch64/sme-7-illegal.l: New test. * testsuite/gas/aarch64/sme-7-illegal.s: New test. * testsuite/gas/aarch64/sme-7.d: New test. * testsuite/gas/aarch64/sme-7.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operands. (enum aarch64_insn_class): Added sme_ldr and sme_str. (AARCH64_OPDE_UNTIED_IMMS): New operand error kind. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter. (aarch64_ins_sme_za_list): New inserter. (aarch64_ins_sme_za_array): New inserter. (aarch64_ins_sme_addr_ri_u4xvl): New inserter. * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): Added ins_sme_za_list, ins_sme_za_array and ins_sme_addr_ri_u4xvl. * aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor. (aarch64_ext_sme_za_list): New extractor. (aarch64_ext_sme_za_array): New extractor. (aarch64_ext_sme_addr_ri_u4xvl): New extractor. * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): Added ext_sme_za_list, ext_sme_za_array and ext_sme_addr_ri_u4xvl. * aarch64-opc.c (operand_general_constraint_met_p): (aarch64_match_operands_constraint): Handle sme_ldr, sme_str and sme_misc. (aarch64_print_operand): New operands supported. * aarch64-tbl.h (OP_SVE_QUU): New qualifier. (OP_SVE_QZU): New qualifier. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.
2021-11-17aarch64: [SME] Add ZERO instructionPrzemyslaw Wirkus1-0/+1
This patch is adding ZERO (a list of 64-bit element ZA tiles) instruction. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_list_of_64bit_tiles): New parser. (parse_operands): Handle OPND_SME_list_of_64bit_tiles. * testsuite/gas/aarch64/sme-4-illegal.d: New test. * testsuite/gas/aarch64/sme-4-illegal.l: New test. * testsuite/gas/aarch64/sme-4-illegal.s: New test. * testsuite/gas/aarch64/sme-4.d: New test. * testsuite/gas/aarch64/sme-4.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_SME_list_of_64bit_tiles. opcodes/ChangeLog: * aarch64-opc.c (print_sme_za_list): New printing function. (aarch64_print_operand): Handle OPND_SME_list_of_64bit_tiles. * aarch64-opc.h (enum aarch64_field_kind): New bitfield FLD_SME_zero_mask. * aarch64-tbl.h (struct aarch64_opcode): New ZERO instruction. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.
2021-11-17aarch64: [SME] Add MOV and MOVA instructionsPrzemyslaw Wirkus1-0/+2
This patch is adding new MOV (alias) and MOVA SME instruction. gas/ChangeLog: * config/tc-aarch64.c (enum sme_hv_slice): new enum. (struct reloc_entry): Added ZAH and ZAV registers. (parse_sme_immediate): Immediate parser. (parse_sme_za_hv_tiles_operand): ZA tile parser. (parse_sme_za_hv_tiles_operand_index): Index parser. (parse_operands): Added ZA tile parser calls. (REGNUMS): New macro. Regs with suffix. (REGSET16S): New macro. 16 regs with suffix. * testsuite/gas/aarch64/sme-2-illegal.d: New test. * testsuite/gas/aarch64/sme-2-illegal.l: New test. * testsuite/gas/aarch64/sme-2-illegal.s: New test. * testsuite/gas/aarch64/sme-2.d: New test. * testsuite/gas/aarch64/sme-2.s: New test. * testsuite/gas/aarch64/sme-2a.d: New test. * testsuite/gas/aarch64/sme-2a.s: New test. * testsuite/gas/aarch64/sme-3-illegal.d: New test. * testsuite/gas/aarch64/sme-3-illegal.l: New test. * testsuite/gas/aarch64/sme-3-illegal.s: New test. * testsuite/gas/aarch64/sme-3.d: New test. * testsuite/gas/aarch64/sme-3.s: New test. * testsuite/gas/aarch64/sme-3a.d: New test. * testsuite/gas/aarch64/sme-3a.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New enums AARCH64_OPND_SME_ZA_HV_idx_src and AARCH64_OPND_SME_ZA_HV_idx_dest. (struct aarch64_opnd_info): New ZA tile vector struct. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter. * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter ins_sme_za_hv_tiles. * aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor. * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor ext_sme_za_hv_tiles. * aarch64-opc.c (aarch64_print_operand): Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest. * aarch64-opc.h (enum aarch64_field_kind): New enums FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv. (struct aarch64_operand): Increase fields size to 5. * aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.
2021-11-17aarch64: [SME] Add SME instructionsPrzemyslaw Wirkus1-0/+3
Patch is adding new SME matrix instructions. Please note additional instructions will be added in following patches. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_zada_operand): New parser. * config/tc-aarch64.c (parse_reg_with_qual): New reg parser. * config/tc-aarch64.c (R_ZA): New egister type. (parse_operands): New parser. * testsuite/gas/aarch64/sme-illegal.d: New test. * testsuite/gas/aarch64/sme-illegal.l: New test. * testsuite/gas/aarch64/sme-illegal.s: New test. * testsuite/gas/aarch64/sme.d: New test. * testsuite/gas/aarch64/sme.s: New test. * testsuite/gas/aarch64/sme-f64.d: New test. * testsuite/gas/aarch64/sme-f64.s: New test. * testsuite/gas/aarch64/sme-i64.d: New test. * testsuite/gas/aarch64/sme-i64.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operands AARCH64_OPND_SME_ZAda_2b, AARCH64_OPND_SME_ZAda_3b and AARCH64_OPND_SME_Pm. (enum aarch64_insn_class): New instruction class sme_misc. opcodes/ChangeLog: * aarch64-opc.c (aarch64_print_operand): Print OPND_SME_ZAda_2b and OPND_SME_ZAda_3b operands. (verify_constraints): Handle OPND_SME_Pm. * aarch64-opc.h (enum aarch64_field_kind): New bit fields FLD_SME_ZAda_2b, FLD_SME_ZAda_3b and FLD_SME_Pm. * aarch64-tbl.h (OP_SME_ZADA_PN_PM_ZN_S): New qualifier set. (OP_SME_ZADA_PN_PM_ZN_D): New qualifier. (OP_SME_ZADA_PN_PM_ZN_ZM): New qualifier. (OP_SME_ZADA_S_PM_PM_S_S): New qualifier. (OP_SME_ZADA_D_PM_PM_D_D): New qualifier. (OP_SME_ZADA_S_PM_PM_H_H): New qualifier. (OP_SME_ZADA_S_PM_PM_B_B): New qualifier. (OP_SME_ZADA_D_PM_PM_H_H): New qualifier. (SME_INSN): New instruction macro. (SME_F64_INSN): New instruction macro. (SME_I64_INSN): New instruction macro. (SME_INSNC): New instruction macro. (struct aarch64_opcode): New SME instructions. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.
generated by cgit v1.1 at 2024-08-16 05:49:34 +0000