- Sep 28, 2021
-
-
Geert Uytterhoeven authored
Add compatible values to Ethernet PHY subnodes representing Renesas uPD60610 or uPD60611 PHYs on RZ/A1 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/335a1dfea905369da683e122e41e08ca1c5f90f7.1631174218.git.geert+renesas@glider.be
-
Geert Uytterhoeven authored
Add compatible values to Ethernet PHY subnodes representing Realtek RTL8201FL PHYs on RZ/A2 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by:
-
Geert Uytterhoeven authored
Add compatible values to Ethernet PHY subnodes representing SMSC LAN8710A PHYs on RZ/A1 and R-Mobile A1 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by:
-
Geert Uytterhoeven authored
Add compatible values to Ethernet PHY subnodes representing Micrel KSZ9031 PHYs on RZ/G1 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
-
Geert Uytterhoeven authored
Add compatible values to Ethernet PHY subnodes representing Micrel KSZ8081 PHYs on RZ/G1 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by:
-
Geert Uytterhoeven authored
Add compatible values to Ethernet PHY subnodes representing Micrel KSZ8041 PHYs on RZ/G1 and R-Car Gen2 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by:
-
Geert Uytterhoeven authored
While networking works fine in RGMII mode when using the Linux generic PHY driver, it fails when using the Atheros PHY driver. Fix this by correcting the Ethernet PHY mode to RGMII-RXID, which works fine with both drivers. Fixes: a5200e63 ("arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling") Reported-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
According to schematics, and confirmed by ID_REV register contents, the Ethernet controllers on various development board are not SMSC LAN9220, but different variants: - KZM-A9-Dual and KZM-A9-GT: LAN9221, - Bock-W and Marzen: LAN89218AQ. Update the compatible values accordingly. Signed-off-by:
-
- Sep 24, 2021
-
-
Lad Prabhakar authored
Enable CANFD on RZ/G2L SMARC platform. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
-
Lad Prabhakar authored
Enable the ADC which is present on RZ/G2L SMARC SOM. Signed-off-by:
-
Lad Prabhakar authored
Move extal and memory nodes to SOM DTSI. Signed-off-by:
-
Kieran Bingham authored
Add support for SW47, SW48 and SW49 via "gpio-keys" on the R-Car V3U Falcon board. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20210922201314.3205674-1-kieran.bingham@ideasonboard.com Signed-off-by:
-
Biju Das authored
Add audio routing for Mic with bias to reduce noise when doing audio capture. Signed-off-by:
-
Biju Das authored
Enable audio on RZ/G2L SMARC EVK by linking SSI0 with WM8978 audio CODEC. Signed-off-by:
-
Biju Das authored
Add WM8978 sound codec node to RZ/G2L SMARC EVK. Signed-off-by:
-
Biju Das authored
Add dmac phandles to SSI nodes to support DMA operation. Signed-off-by:
-
Biju Das authored
Enable I2C{0,1,3} support on RZ/G2L SMARC EVK. Signed-off-by: -
Biju Das authored
Enable USB2.0 Host/Device support on RZ/G2L SMARC EVK. Signed-off-by:
-
- Sep 20, 2021
-
-
Yoshihiro Shimoda authored
Add iommus into sdhi node. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210901111305.570206-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by:
-
Yoshihiro Shimoda authored
Add IPMMU nodes for r8a779a0. Note that this patch sets the power domain of IPMMU-VC0 is Always-On tentatively because the SoC doesn't have A3VC power domain. Signed-off-by:
-
Duc Nguyen authored
This patch adds TPU node for R-Car V3U (r8a779a0) SoC. Signed-off-by:
Duc Nguyen <duc.nguyen.ub@renesas.com> Signed-off-by:
LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20210901091725.35610-3-wsa+renesas@sang-engineering.com Signed-off-by:
-
Wolfram Sang authored
Add the missing TPU node for the R-Car M3-W+ SoC. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210827073819.29992-1-wsa+renesas@sang-engineering.com Signed-off-by:
-
Biju Das authored
Add SSI{0,1,2,3} nodes to RZ/G2L SoC DTSI. Signed-off-by: -
Biju Das authored
Add external audio clocks nodes to RZ/G2L (a.k.a R9A07G044) SoC DTSI. The external audio clocks are configured as 0 Hz fixed frequency clocks by default. Boards that provide audio clocks should override them. Signed-off-by:
-
Biju Das authored
Add USB2.0 device support to RZ/G2L SoC DT. Signed-off-by:
-
Biju Das authored
Add USB2.0 phy and host support to SoC DT. Signed-off-by:
-
Geert Uytterhoeven authored
Add support for the Renesas Salvator-X 2nd version development board equipped with an R-Car M3Ne-2G SiP. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/efced5c7ff71b0a0ae359be12112e0d4dfb21a72.1628766192.git.geert+renesas@glider.be
-
Geert Uytterhoeven authored
Add support for the Renesas R-Car H3Ne (R8A779M8) SoC, which is a different grading of the R-Car H3-N (R8A77951) SoC. Signed-off-by:
-
Geert Uytterhoeven authored
Add support for the Renesas R-Car D3e (R8A779M7) SoC, which is a different grading of the R-Car D3 (R8A77995) SoC. Signed-off-by:
-
Geert Uytterhoeven authored
Add support for the Renesas R-Car E3e (R8A779M6) SoC, which is a different grading of the R-Car E3 (R8A77990) SoC. Signed-off-by:
-
Geert Uytterhoeven authored
Add support for the Renesas R-Car M3Ne-2G (R8A779M5) SoC, which is a different grading of the R-Car M3-N (R8A77965) SoC. Signed-off-by:
-
Geert Uytterhoeven authored
Add support for the Renesas R-Car M3Ne (R8A779M4) SoC, which is a different grading of the R-Car M3-N (R8A77965) SoC. Signed-off-by:
-
Geert Uytterhoeven authored
Add support for the Renesas R-Car M3e (R8A779M2) SoC, which is a different grading of the R-Car M3-W+ (R8A77961) SoC. Signed-off-by:
-
Geert Uytterhoeven authored
Add support for the Renesas R-Car H3e (R8A779M0) SoC, which is a different grading of the R-Car H3 ES3.0 (R8A77951) SoC. Signed-off-by:
-
Geert Uytterhoeven authored
Move the common parts for the Renesas Ebisu board to ebisu.dtsi, to avoid future duplication of board descriptions. Change a reference in a comment from "r8a77990" to "R-Car E3(e)", to prepare for the advent of "R-Car E3e". Signed-off-by:
-
Geert Uytterhoeven authored
Move the common parts for the Renesas Draak board to draak.dtsi, to avoid future duplication of board descriptions. Change a reference in a comment from "r8a77995" to "R-Car D3(e)", to prepare for the advent of "R-Car D3e". Signed-off-by:
-
Lad Prabhakar authored
Add scif0 pins in pinctrl node and update the scif0 node to include pinctrl properties. Signed-off-by:
-
Biju Das authored
Add DMAC support to RZ/G2L SoC DT. Signed-off-by:
-
Geert Uytterhoeven authored
Enable the third I2C channel, and describe the I2C EEPROM connected to it. Signed-off-by:
-
- Sep 13, 2021
-
-
Linus Torvalds authored
-
