Commit eb7d7b00 authored Sep 09, 2021 by Geert Uytterhoeven

ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on RZ/G1 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ce8ae6b199fa244315a008ae31891a808ca1948d.1631174218.git.geert+renesas@glider.be

parent 9ec5b8fa

arch/arm/boot/dts/iwg20d-q7-common.dtsi

+2 −0

Original line number	Diff line number	Diff line
		@@ -158,6 +158,8 @@ &avb {
		status = "okay";

		phy3: ethernet-phy@3 {
		compatible = "ethernet-phy-id0022.1622",
		"ethernet-phy-ieee802.3-c22";
		reg = <3>;
		micrel,led-mode = <1>;
		};

arch/arm/boot/dts/r8a7742-iwg21d-q7.dts

+2 −0

Original line number	Diff line number	Diff line
		@@ -175,6 +175,8 @@ &avb {
		status = "okay";

		phy3: ethernet-phy@3 {
		compatible = "ethernet-phy-id0022.1622",
		"ethernet-phy-ieee802.3-c22";
		reg = <3>;
		micrel,led-mode = <1>;
		};

arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts

+2 −0

Original line number	Diff line number	Diff line
		@@ -123,6 +123,8 @@ phy3: ethernet-phy@3 {
		* On some older versions of the platform (before R4.0) the phy address
		* may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
		*/
		compatible = "ethernet-phy-id0022.1622",
		"ethernet-phy-ieee802.3-c22";
		reg = <3>;
		micrel,led-mode = <1>;
		};

arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts

+2 −0

Original line number	Diff line number	Diff line
		@@ -79,6 +79,8 @@ &avb {
		status = "okay";

		phy3: ethernet-phy@3 {
		compatible = "ethernet-phy-id0022.1622",
		"ethernet-phy-ieee802.3-c22";
		reg = <3>;
		interrupt-parent = <&gpio5>;
		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;