- Sep 18, 2020
-
-
Geert Uytterhoeven authored
According to Technical Update TN-RCT-S0352A/E, MSIOF1 DMA can only be used with SYS-DMAC0 on R-Car E3. Fixes: 62c0056f ("arm64: dts: renesas: r8a774c0: Add MSIOF nodes") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200917132117.8515-3-geert+renesas@glider.be
-
Geert Uytterhoeven authored
According to Technical Update TN-RCT-S0352A/E, MSIOF1 DMA can only be used with SYS-DMAC0 on R-Car E3. Fixes: 85170420 ("arm64: dts: renesas: r8a77990: Add DMA properties to MSIOF nodes") Signed-off-by:
-
- Sep 15, 2020
-
-
Fabrizio Castro authored
Add the DRIF controller nodes for the r8a77990 (a.k.a. R-Car E3). Please note that R-Car E3 has register BITCTR located at offset 0x80 (this register is not available on the r8a77960 and r8a77951, whose support has already been upstreamed), and even though it is not dealt with just yet within the driver, we have to keep that into account with our device tree nodes. Also, please note that while testing it has emerged that the HW User Manual has the wrong DMA details for DRIF2 and DRIF3 on E3, as they are only allowed SYS-DMAC0 rather than SYS-DMAC1 and SYS-DMAC2. An errata addressing this issue will be available soon. Signed-off-by:
Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by:
Chris Paterson <chris.paterson2@renesas.com> Link: https://lore.kernel.org/r/20200911121259.5669-1-fabrizio.castro.jz@renesas.com Signed-off-by:
-
Lad Prabhakar authored
This patch enables CAN0 interface exposed through connector J4 on the camera DB. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
-
Lad Prabhakar authored
Add VSP support to R8A7742 (RZ/G1H) SoC dtsi. Signed-off-by:
-
Geert Uytterhoeven authored
As the pin configuration child nodes for EtherAVB on the Draak and Ebisu boards contain only a single configuration, there is no need to wrap them in additional grandchild containers. Hence remove the superfluous level. Signed-off-by:
-
- Sep 11, 2020
-
-
Kuninori Morimoto authored
This patch enables HDMI Sound on R-Car M3-W+ Salvator-XS board. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87a6y1rtun.wl-kuninori.morimoto.gx@renesas.com Signed-off-by:
-
Kuninori Morimoto authored
This patch enables HDMI Display on R-Car M3-W+ Salvator-XS board. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/87blihrtus.wl-kuninori.morimoto.gx@renesas.com Signed-off-by:
-
Kuninori Morimoto authored
This patch adds HDMI device nodes for R-Car M3-W+ (r8a77961) SoC. This patch was tested on R-Car M3-W+ Salvator-XS board. Signed-off-by:
-
Kuninori Morimoto authored
This patch adds DU device nodes for R-Car M3-W+ (r8a77961) SoC. This patch was tested on R-Car M3-W+ Salvator-XS board. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
-
Kuninori Morimoto authored
This patch adds VSP device nodes for R-Car M3-W+ (r8a77961) SoC. This patch was tested on R-Car M3-W+ Salvator-XS board. Signed-off-by:
-
Kuninori Morimoto authored
This patch adds FCP device nodes for R-Car M3-W+ (r8a77961) SoC. This patch was tested on R-Car M3-W+ Salvator-XS board. Signed-off-by:
-
Geert Uytterhoeven authored
According to Devicetree Specification v0.2 and later, Section "Generic Names Recommendation", the node name for a pin controller device node should be "pinctrl". Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200821112433.5652-1-geert+renesas@glider.be
-
Geert Uytterhoeven authored
According to Devicetree Specification v0.2 and later, Section "Generic Names Recommendation", the node name for a pin controller device node should be "pinctrl". Signed-off-by:
-
Yoshihiro Shimoda authored
Initial support for the Renesas Falcon CPU and BreakOut boards support. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1599739372-30669-5-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by:
-
Yoshihiro Shimoda authored
Add initial support for the Renesas R8A77990 (R-Car V3U) support. Signed-off-by:
-
Geert Uytterhoeven authored
Renesas R-Car V3U DT Binding Definitions Clock and Power Domain definitions for the Renesas R-Car V3U (R8A779A0) SoC, shared by driver and DT source files.
-
Lad Prabhakar authored
Add support for LED trigger on SD2 interface. Signed-off-by:
-
Lad Prabhakar authored
This patch enables CAN1 interface exposed through connector J20 on the carrier board. Signed-off-by:
-
Lad Prabhakar authored
Add support for the SPI NOR device which is connected to MSIOF0 interface on the iWave RainboW-G21d-q7 board. Signed-off-by:
-
Lad Prabhakar authored
Add VIN[0123] instances found in the r8a7742 SoC. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20200907144509.8861-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by:
-
Lad Prabhakar authored
Enable sata interface on HiHope RZ/G2H board. Signed-off-by:
-
- Sep 10, 2020
-
-
Yoshihiro Shimoda authored
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car V3U (R8A779A0) SoC. Signed-off-by:
-
Yoshihiro Shimoda authored
Add power domain indices for R-Car V3U (r8a779a0). Signed-off-by:
-
- Sep 07, 2020
-
-
Lad Prabhakar authored
Add PCIe EP nodes for R8A774E1 Soc dtsi. Signed-off-by:
-
- Sep 04, 2020
-
-
Lad Prabhakar authored
The HiHope RZ/G2H is advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. New dts, enabling the lvds node to get the panel to work with HiHope RZ/G2H. Signed-off-by:
-
Lad Prabhakar authored
Enable cpuidle (core shutdown) support for RZ/G2H CA5x cores. Signed-off-by:
-
Marian-Cristian Rotariu authored
Add FDP1 device nodes to R8A774E1 (RZ/G2H) SoC dtsi. Signed-off-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by:
-
Lad Prabhakar authored
Enable PCIe Controller and set PCIe bus clock frequency. Signed-off-by:
-
Lad Prabhakar authored
Add the five IPMMU instances found in the r8a7742 to DT with a disabled status. Signed-off-by:
-
- Aug 31, 2020
-
-
Kuninori Morimoto authored
This patch enables Sound and Audio-DMAC for R-Car M3-W+ (R8A77961). It is tested on R-Car M3-W+ Salvator-XS board. Signed-off-by:
-
Marian-Cristian Rotariu authored
This patch adds PWM[0123456] device nodes to the RZ/G2H (a.k.a R8A774E1) device tree. Signed-off-by:
-
Lad Prabhakar authored
Add support for the SPI NOR device used to boot up the system to the System on Module DT. Signed-off-by:
-
- Aug 25, 2020
-
-
Biju Das authored
This patch enables HS400 mode on HiHope RZ/G2H board. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
-
Lad Prabhakar authored
Enable BQ32000 RTC which is connected to I2C0 on the iWave RainboW-G21M-q7 SOM. Signed-off-by:
-
Lad Prabhakar authored
Sort the DT nodes alphabetically so that its easier to maintain. Signed-off-by:
-
Lad Prabhakar authored
Add the definitions for can0 and can1 to the r8a7742 SoC dtsi. Signed-off-by:
-
Lad Prabhakar authored
Add PCIe EP node to R8A774C0 (RZ/G2E) SoC dtsi. Signed-off-by:
-
Lad Prabhakar authored
Add PCIe EP nodes to R8A774B1 (RZ/G2N) SoC dtsi. Signed-off-by:
-
Lad Prabhakar authored
Add PCIe EP nodes to R8A774A1 (RZ/G2M) SoC dtsi. Signed-off-by:
-
