aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)AuthorFilesLines
2020-12-26tcl/target/rk3308.cfg: add defer-examineJiri Kastner1-1/+2
only core0 is brought up by bootloader Change-Id: I1d6b5e6ba7498beadbf3805f4271f0197e411bd5 Signed-off-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/5980 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins Reviewed-by: Jonathan McDowell <noodles-openocd@earth.li>
2020-11-15tcl/target: remove deprecated ${target}_${adapter}.cfg filesTarek BOCHKATI12-23/+0
Change-Id: Ic4837ad3bd06eb353020e44638306f341a923c05 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@st.com> Reviewed-on: http://openocd.zylin.com/5929 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-11-15flash/stm32l4x: STM32L55/L56xx basic support (non-secure mode)Tarek BOCHKATI2-0/+143
STM32L5 have 512 Kbytes of Flash memory with dual bank architecture. STM32L5 flash is quite similar to L4 flash, mainly register names and offsets and some bits are changed. NON-SECURE flash is located at 0x8000000 like L4 devices, so no big change is needed (secure flash will be subject of another change). Note: flash driver name is set stm32l5x, in order to extend the commands with specific L5 commands (to manage TZEN for example ...) Note: this works only when TZEN=0 Change-Id: Ie758abb4aa19a3f29eeb0702d7dcb43992e4c639 Signed-off-by: Michael Jung <mijung@gmx.net> Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5510 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-11-15tcl/board: rename board file ST b-l475e-iot01aAntonio Borneo1-0/+2
Use the board file name as <company>_<name>.cfg Add the SPDX tag to workaround an error in checkpatch that fails to recognize as valid a patch that only changes a file name. Change-Id: I929cd9e5f9fe2e7386950643487534c9a5a05bc6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: e44539d66c89 ("Flash, FRAM and EEPROM driver for STM32 QUAD-/OCTOSPI interface") Reviewed-on: http://openocd.zylin.com/5931 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins
2020-11-08Flash, FRAM and EEPROM driver for STM32 QUAD-/OCTOSPI interfaceAndreas Bolsch21-1/+1461
- write speed up to 150 kByte/s on STM32F469I-disco (due to SWD clock and USB connection), up to 1 MByte/s on Nucleo-F767ZI with external STLink-V3 or Nucleo-G474RE with two W25Q256FV in dual 4-line mode or STM32H73BI-Disco in octal mode - tested with STM32L476G-disco (64MBit flash, 3-byte addr), STM32F412G-Disco, STM32F469I-Disco, STM32F746G-Disco, and STM32L476G-Disco (all 128Mbit flash, 3-byte addr), STM32F723E-Disco, STM32F769I-Disco (512Mbit flash, 4-byte addr) STM32L4R9I-Disco, STM32L4P5G-Disco (512MBit octo-flash, DTR, 4-byte addr) STM32H745I-Disco, STM32H747I-Disco (two 512MBit flash, 4-byte addr) STM32H73BI-Disco, STM32H735G-Disco (512MBit octo-flash, DTR, 4-byte addr) - suitable cfg for Discovery boards included - limited parsing of SFDP data if flash device not hardcoded (tested only in single/quad mode as most devices either don't support SFDP at all or have empty(!) SFDP memory) - 'set' command for auto detection override (e. g. for EEPROMs) - 'cmd' command for arbitrary SPI commands (reconfiguration, testing etc.) - makefile for creation of binary loader files - tcl/board/stm32f469discovery.cfg superseded by stm32f469i-disco.cfg - tcl/board/stm32f7discovery.cfg removed as name is ambiguous (superseded by stm32f746g-disco.cfg vs. stm32f769i-disco.cfg) - dual 4-line mode tested on Nucleo-F767ZI, Nucleo-H743ZI and Nucleo-H7A3ZI-Q with two W25Q256FV, and on Nucleo-L496ZP-P and Nucleo-L4R5ZI with two W25Q128FV, sample cfg files included and on STM32H745I-Disco, STM32H747I-Disco, STM32H750B-Disco - read/verify/erase_check uses indirect read mode to work around silicon bug in H7, L4+ and MP1 memory mapped mode (last bytes not readable, accessing last bytes causes debug interface to hang) - octospi supported only in single/dual 1-line, 2-line, 4-line and single 8-line modes, (not in hyper flash mode) Requirements: GPIOs must be initialized appropriately, and SPI flash chip be configured appropriately (1-line ..., QPI, 4-byte addresses ...). This is board/chip specific, cf. included cfg files. The driver infers most parameters from current setting in CR, CCR, ... registers. Change-Id: I54858fbbe8758c3a5fe58812e93f5f39514704f8 Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-on: http://openocd.zylin.com/4321 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Christopher Head <chead@zaber.com>
2020-11-07stm32h7x: Fix reset with non-HLA interfaces on macOSAlberto García Hierro1-10/+15
regsub doesn't work correctly on macOS Catalina, which results in an incorrect CHIPNAME derived from the current target. Since regsub is only used by this target, replace it with a simple string search for '.' followed by a substring. This is funcionally equivalent to what the regular expression was doing, but instead relies in simpler string operations that should have little to no differences between systems. Also, refactor CHIPNAME detection into proc stm32h7x_chipname, so it's always retrieved in the same way without duplicating the code. Change-Id: Ia9f63f56b508688e74278b022eaec47e503916e7 Signed-off-by: Alberto Garcia Hierro <alberto@garciahierro.com> Reviewed-on: http://openocd.zylin.com/5872 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Christopher Head <chead@zaber.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-11-07tcl/interface/ftdi: Add HIE JTAG Debugger configJonathan McDowell1-0/+20
Change-Id: Ibb7a2bb8807c442394982e89258874557a2baaad Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-on: http://openocd.zylin.com/5910 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-11-04tcl: replace '-ctibase' with '-baseaddr'Antonio Borneo11-17/+17
Replace the deprecated option '-ctibase' with the generic option '-baseaddr'. Change generated with command: sed -i 's/-ctibase/-baseaddr/g' $(find tcl/ -type f) Change-Id: If776934d2ac106532708768bb3a4ec6fcffb0368 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5870 Tested-by: jenkins
2020-11-04stm32h7x.cfg: alignment with RM0399 rev3Tarek BOCHKATI1-2/+4
in RM0399 rev2, there was these bits in DBGMCU_CR registers: - DBGSTBY_D3 : bit 7 - DBGSTOP_D3 : bit 8 these bits have been changed to reserved in rev3 Change-Id: I9d10d90e383795dc8e25a117d59fa065dc594610 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5861 Tested-by: jenkins Reviewed-by: Christopher Head <chead@zaber.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-10-30tcl/board: fix changed target config filenamesAntonio Borneo2-2/+2
In commit a1ce28b118e7 ("rename some target scripts to be consistent with the rest") the following renames was applied, but the old names are still referenced: tcl/target/{sam7se512.cfg => at91sam7se512.cfg} tcl/target/{sam7x256.cfg => at91sam7x256.cfg} Fix the board files to use to correct target config filename. Change-Id: I7698aa0da7db95c2bd9ba7ab8c260905a975c857 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5888 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2020-10-30tcl/board: drop 'tcl' prefix in 'find' commandAntonio Borneo2-2/+2
When OpenOCD is installed to the host the 'tcl' folder gets usually installed in /usr/share/openocd/, thus having 'tcl' as prefix of the target's file causes 'find' to fail. Remove the 'tcl' folder prefix. Change-Id: I3dc484c8de6af8f5aae4dd1b230522ee47ae2ba6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5887 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2020-10-30tcl/interface/ti-icdi: remove empty lines at end of fileAntonio Borneo1-1/+0
Change-Id: I031dc52c20b8f213b12df13c9c974d9ac3ef2164 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5603 Tested-by: jenkins
2020-10-30board: drop open-bldcKarl Palsson1-7/+0
This is a) broken and b) doesn't include anything other than the (broken) target alias. Don't see any reason for it to exist. Change-Id: I833635eeac392bf7c0c39f51ff2f76525ba2d406 Signed-off-by: Karl Palsson <karlp@tweak.net.au> Reviewed-on: http://openocd.zylin.com/5884 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-10-28tcl/interface/ftdi: Add Steppenprobe open hardware interfaceDiego Herranz1-0/+41
https://github.com/diegoherranz/steppenprobe Change-Id: Ief2c3f4a8707fa628650697d93893b2355015898 Signed-off-by: Diego Herranz <diegoherranz@diegoherranz.com> Reviewed-on: http://openocd.zylin.com/5653 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-10-24Added comment to ti-icdi.cfgJohn Pham1-0/+5
Added comment to ti-icdi.cfg specifying how to get serial and an example of specifying hla_serial for ti-icdi devices. This has been implemented in revision 2121a8f92969804611412b705af8114697a647dc Change-Id: I648458a4dea176beae6a3f1a4e5641d0206077eb Signed-off-by: John Pham <jhnphm@gmail.com> Reviewed-on: http://openocd.zylin.com/2528 Tested-by: jenkins Reviewed-by: Matthew Trescott <matthewtrescott@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-10-22tcl/target/nrf52: fix nrf52_recoverTomas Vanek1-17/+18
nrf52_recover was merged in pre "Handle Tcl return values consistently" state - remove ocd_ prefixes. Erase and unlock sequence was changed to comply Nordic semiconductor recommendation: https://infocenter.nordicsemi.com/index.jsp?topic=%2Fnwp_027%2FWP%2Fnwp_027%2FnWP_027_erasing.html Change-Id: Ic54236c27cf25ad8091e9e572ba1ef846f0d47c2 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reported-by: Pieter De Gendt <pieter.degendt@gmail.com> Reviewed-on: http://openocd.zylin.com/5845 Tested-by: jenkins Reviewed-by: Pieter De Gendt <pieter.degendt@gmail.com>
2020-10-03ARM|Driver: Add DPI Driver for emulationKevin Burke1-0/+38
This driver provides support for Cadence JTAG BFM The "jtag_dpi" driver implements a JTAG driver acting as a client for the SystemVerilog Direct Programming Interface (DPI) for JTAG devices. DPI allows OpenOCD to connect to the JTAG interface of a hardware model written in SystemVerilog, for example, on an emulation model of target hardware. Tested on Ampere emulation with Altra and Altra Max models Change-Id: Iaef8ba5cc1398ee2c888f39a606e8cb592484625 Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com> Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com> Reviewed-on: http://openocd.zylin.com/5573 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-10-03tcl: board/dp_busblaster_v4 Busblaster v4.1a by Seed Studio addedUlrich-Lorenz Schlüter1-0/+19
Change-Id: I53141d7f6f022f9dee641858f5fb0e0b70c049f8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Ulrich-Lorenz Schlüter <audiomobster@gmail.com> Reviewed-on: http://openocd.zylin.com/5549 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-10-03tcl/board: Add QuickLogic QuickFeather configurationJan Kowalewski1-0/+9
Add configuration for QuickLogic QuickFeather development kit. Change-Id: I39120714bf0bcafa86e0071c38da84a7d9f12a0d Signed-off-by: Jan Kowalewski <jkowalewski@antmicro.com> Reviewed-on: http://openocd.zylin.com/5803 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2020-10-03tcl/target: Add QuickLogic EOS S3 MCU configurationJan Kowalewski1-0/+44
Add configuration for QuickLogic EOS S3 MCU target. Change-Id: I375057ff387a826e632f194843dbd92148b0c5dd Signed-off-by: Jan Kowalewski <jkowalewski@antmicro.com> Reviewed-on: http://openocd.zylin.com/5802 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-09-05hla_transport: split command registration per transportAntonio Borneo1-3/+4
All the HLA transports (hla_swd and hla_jtag) register the same set of commands. Such commands are mainly aimed at handling JTAG compatibility that is required for the transport hla_jtag only. Split per transport the command registration and limit the commands to only those required by the transport itself. Replace the command "hla newtap" with the transport specific "swd newdap" or "jtag newtap". Deprecate the command "hla". Change-Id: I79c78fa97b707482608516d3824151a4d07644c0 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4877 Tested-by: jenkins
2020-09-05tcl/target: use command 'jtag newtap' to add a boundary scan TAPAntonio Borneo5-6/+6
A JTAG TAP for boundary scan should be added in the scan chain through the command "jtag newtap". In some TCL target script the boundary scan TAP is added through the command "swj_newdap", command that is inappropriate in this context because specific for arm adi-v5 SWJ-DP. This situation was probably created to bypass the error with HLA framework, caused by missing command "jtag newtap". Add the command "jtag newtap" in HLA, by reusing the existing code for command "hla newtap". Fix the TCL target scripts to use the command "jtag newtap" for the boundary scan TAPs. The TCL script target/psoc6.cfg has no evident reference to HLA, so the reason for using "swj_newdap" is less clear. Nevertheless it uses the wrong command and, once HLA is fixed, there is no reason to avoid fixing it too. Change-Id: Ia92f8221430cf6f3d2c34294e22e5e18963bb88c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4873 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2020-09-05tcl/board/st_nucleo_l1.cfg use dualbank configurationAlexandre Bourdiol1-1/+1
st_nucleo_l1.cfg is based on STM32L152RET6 which support dualbank flash. Change-Id: I7ecdb7b7557229465e23eed667f20cd84197dfc7 Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com> Reviewed-on: http://openocd.zylin.com/5829 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-09-05tcl/interface/ftdi: fix comment in minimodule-swd.cfgJan Kowalewski1-1/+1
Change-Id: I160faca11f231e3e839046ae2045e37e350ca613 Signed-off-by: Jan Kowalewski <jkowalewski@antmicro.com> Reviewed-on: http://openocd.zylin.com/5804 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-08-16tcl: Add support for NDS V5 target and xc7/Corvette-F1Hellosun Wu3-0/+35
The "Corvette-F1" is an Arduino-compatible evaluation platform, which fully supports AndesCore. The board has FTDI FT2232 to connected to FPGA's JTAG interface. The "ADP-XC7KFF676" is a development and prototyping board that provides capacity for evaluation of AndesCore processors. It works with AICE in-circuit debugging tools. This patch also include target/nds32v5.cfg to support AndesCore N22/N25F and AndeShape Platform AE250. Change-Id: I144d5063d5086d00ec44634a5028b5ea5d2eba33 Signed-off-by: Hellosun Wu <wujiheng.tw@gmail.com> Reviewed-on: http://openocd.zylin.com/5338 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-08-02tcl/interface: snps_sdp: fix minor typo s/similiar/similar/Antonio Borneo1-1/+1
Change-Id: I4fd6af560278b3e114cc5d8ee1b49b5c4521d8be Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: b2821b607460 ("Introduce tcl config files for Synopsys HSDK board") Reviewed-on: http://openocd.zylin.com/5788 Tested-by: jenkins Reviewed-by: Evgeniy Didin <didin@synopsys.com>
2020-08-02tcl/target/armada370: remove useless 'init' commandAntonio Borneo1-2/+0
As the comment states, the 'init' command is issued before the command 'dap apsel', otherwise it fails. This dependency has been already fixed in commit e48690cb26e4 ("target/arm_adi_v5: allow commands apsel and apcsw during init phase"), so the command 'dap apsel' can now be issued directly. Remove both the unneeded 'init' command and the comment that documents and justify its presence. Change-Id: I50f0a820fa7ead6f5a3bd9cc5180d521070822c9 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5786 Tested-by: jenkins
2020-08-02nulink: add minimal support for Nu-Link2Antonio Borneo1-1/+1
Implementation largely taken from Nuvoton github https://github.com/OpenNuvoton/OpenOCD-Nuvoton Reset is still not fully compatible with OpenOCD framework. Adapted to hidapi. Change-Id: Ieb1791b1b7f0b444c15c9668f8f2bcf34975d48f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Zale Yu <cyyu@nuvoton.com> Reviewed-on: http://openocd.zylin.com/5720 Tested-by: jenkins Reviewed-by: Saravanan Sekar <saravanan@linumiz.com> Reviewed-by: Marc Schink <dev@zapb.de>
2020-08-02jtag/drivers: add support for Nu-Link (Nuvoton ICE) over usbZale Yu1-0/+11
Add support for Nu-Link1 over usb hidapi and config file. The original work is fetched from Nuvoton github. Code cleanup, fix merge conflicts, compile and runtime issues. Switch the code from libusb to hidapi, being the device HID based. Add documentation. Merge fixes for multi-word memory read. Reset is not fully compatible with openocd framework; currently the target is reset and then halt at openocd start. Change-Id: I9738de4e26783ba462ea3e39ec32069fd5bb7d94 Signed-off-by: Zale Yu <cyyu@nuvoton.com> Signed-off-by: Saravanan Sekar <saravanan@linumiz.com> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5635 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de>
2020-07-26drivers/linuxgpiod: add ledAntonio Borneo1-0/+2
Bitbang interface allows having a LED on one of the GPIO. Let also linuxgpiod driver to specify and use the LED connection. Change-Id: Id3d8772ee1808b92354fd073ba3947bacd8253ef Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5770 Tested-by: jenkins
2020-07-26tcl/target: Add initial GigaDevice GD32VF103 supportMarc Schink1-0/+26
There is no flash bank support at the moment. Change-Id: I52a2bde39425d94d9333cda002e5df0a1ef63c08 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5755 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-07-26tcl/target: add Rockchip RK3308 targetJiri Kastner1-0/+69
Change-Id: Ia8c2cec0761c37623fa8a416bcfc405f2af6a6b3 Signed-off-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/5774 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2020-07-26Introduce tcl config files for Synopsys HSDK boardEvgeniy Didin4-0/+180
With this commit we add tcl configure files for ARCv2 HS Development kit(HSDK). HSDK board has Quad-core ARC HS38 CPU with L1 and L2 caches. Change-Id: I372ef45428c7c7ca1421a6da3e5ed08b86f705e0 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5784 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-07-26target/arc: Introduce Actionpoints supportEvgeniy Didin1-0/+58
Actionpoint mechanism allows to setup HW breakpoints and watchpoints on Synopsys ARC CPUs. This mechanism is controlled by DEBUG register and by a set of auxilary registers. Each actionpoint is controlled by 3 aux registers: Actionpoint(AP) match mask(AP_AMM), AP match value(AP_AMV) and AP control(AC). Note: some fields of actionpoint_t structure will be used in further support of watchpoints. Change-Id: I4efb24675f247cc19d9122501c9e63c3126fcab4 Signed-off-by: Evgeniy Didin <didin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5763 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-07-14tcl/interface: add example of linuxgpiod through dln-2Antonio Borneo1-0/+25
The USB adapter DLN-2 provides 32 GPIO (beside I2C, SPI, ...). Use the first 6 GPIO for a SWD/JTAG bitbanging example through linuxgpiod driver. Change-Id: I229c2078142ec648fc6430b5d123539045dcfbda Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5561 Tested-by: jenkins
2020-06-14target/icepick.cfg: Add support for Test TAPs in ICEPick CEdward Fewell1-4/+18
In addition to the debug TAPs, the ICEPick C also supports a bank of Test TAPs (limited functionality intended for non-debuggable targets). Added support for Test TAPs to the icepick_c_tapenable routine. Port numbers of 0 to 15 will continue to be handled as a debug TAP number. Test TAPs will be port numbers of 16 to 31. This functionality will be needed for doing a flash mass erase on CC26xx/CC13xx targets. It is possible for user application to block even adding the Cortex M TAP to the scan chain, so the only way to unbrick the target and erase the flash is using a component on a test TAP of the device's ICEPick router. Change-Id: I0aa52a08d43a00cbd396efdeadd504fc31c98510 Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/5715 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-06-14board: Add the HiFive1 revB board configurationAlistair Francis1-0/+21
Change-Id: If186afcfd2c87414b9323569a16aed9a6054c883 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-on: http://openocd.zylin.com/5680 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tim Newsome <tim@sifive.com>
2020-06-06tcl/boards: Rename 'ek-tm4c1294xl.cfg' to 'ti_ek-tm4c1294xl.cfg'Marc Schink2-13/+16
The new filename has a proper vendor prefix. Keep the old configuration file for now but show a "deprecated" warning at runtime. Change-Id: If7465a752f47f3292e430c8b311148badfd384cd Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5478 Tested-by: jenkins Reviewed-by: Karl Palsson <karlp@tweak.net.au> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-06-06tcl/boards: Rename 'ek-tm4c123gxl.cfg' to 'ti_ek-tm4c123gxl.cfg'Marc Schink2-12/+15
The new filename has a proper vendor prefix. Keep the old configuration file for now but show a "deprecated" warning at runtime. Change-Id: I13871ec13709055843e23b1b6da90694fd60505e Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5477 Tested-by: jenkins Reviewed-by: Karl Palsson <karlp@tweak.net.au> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-06-06tcl/boards: Rename 'dk-tm4c129.cfg' to 'ti_dk-tm4c129.cfg'Marc Schink2-13/+16
The new filename has a proper vendor prefix. Keep the old configuration file for now but show a "deprecated" warning at runtime. Change-Id: I30fcb8f291d401acaa1fe665db0eeabc250d24b6 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5476 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-05-24stm8 target: make adapter speed settings workAke Rehnman2-4/+8
Previously the adapter speed settings were hard-coded to connect with low speed then switch over to high speed regardless what was mentioned in the cfg files. Now the stm8 target intercept adapter speed settings and configure the stm8 control registers accordingly. Change-Id: I7419514e5214e4b43b9d51253cf5b7f04a233533 Signed-off-by: Ake Rehnman <ake.rehnman@gmail.com> Reviewed-on: http://openocd.zylin.com/5548 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-05-24tcl/board: add board ST nucleo-8l152r8Antonio Borneo1-0/+10
The transport SWIM is selected twice, in board and in target, thus a warning is generated at run-time. It should be fixed by remove a line in the target file, but does not harm so let's keep it there for the time being. Change-Id: I479004dc16005a330d552c8dbd5def61690f9b9f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5543 Tested-by: jenkins
2020-05-24swim: add new transportAntonio Borneo3-8/+11
Add SWIM and STM8 to documentation and update TODO file. Introduce transport "swim" and command "swim newtap". Switch in swim.c from HLA API to the new SWIM API. Implement in stlink driver the SWIM APIs as wrappers of existing HLA functions. Remove any SWIM related reference from HLA files. Update stm8 config files and stlink-dap interface config file. Change-Id: I2bb9f58d52900f6eb4df05f979f7ef11fd439c24 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5530 Tested-by: jenkins
2020-05-24swim: fix adapter speed handlingAntonio Borneo2-4/+4
SWIM transport only supports two adapter speeds: - "low speed" equal to 363 kHz (8 MHz / 22) - "high speed" equal to 800 kHz (8 MHz / 10) Replace the previous convention that use "0" or "1" for "low" or "high" speed with the effective speed in kHz. Rework the implementation of stlink_speed_swim(). Set low speed in the stm8 config files, because only low speed is permitted at debug connection; the previous code ignores the initial value. Change-Id: I2484c9419a2c554c59eb6b9216339393ab0b54f3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5529 Tested-by: jenkins
2020-05-09tcl: remove trailing whitespaceAntonio Borneo29-140/+140
The script checkpatch available in new Linux kernel offers an experimental feature for automatically fix the code in place. While still experimental, the feature works quite well for simple fixes, like spacing. This patch has been created automatically with the script under review for inclusion in OpenOCD, using the command: find tcl/ -type f -exec ./tools/scripts/checkpatch.pl \ -q --types TRAILING_WHITESPACE --fix-inplace -f {} \; The patch only changes amount and position of whitespace, thus the following commands show empty diff git diff -w git log -w -p git log -w --stat Change-Id: Ie7e3a236f4db9c70019e3b3c7e851edbd3a9dd84 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5616 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2020-05-09tcl: fix typo and spellingAntonio Borneo31-37/+37
Identified by checkpatch script from Linux kernel v5.7-rc1 using the command find tcl/ -type f -exec ./tools/scripts/checkpatch.pl \ -q --types TYPO_SPELLING --strict -f {} \; Change-Id: I7b523f0ab5ec047ff167742a44c29984ac672cf4 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5615 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2020-05-09tcl: stm32mp15x: fix "reset halt" on CM4 in engineering bootAntonio Borneo1-1/+1
The state machine of cortex-m have to pass through a set of state before it get in "halted". Add one more "arp_poll" to achieve the proper state during a "reset halt" command in engineering boot. Change-Id: I90828bf20ef75bd4018f8b911f727ae69c4d6e8f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5649 Tested-by: jenkins Reviewed-by: Richard Braun <rbraun@sceen.net>
2020-05-02coding style: tcl: remove empty lines at end of text filesAntonio Borneo94-116/+0
Empty lines at end of text files are useless. Remove them. Change-Id: I503cb0a96c7ccb132f4486c206a48831121d7abd Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5171 Tested-by: jenkins
2020-04-21tcl/target/nrf52.cfg: detect AP lock and add command to recoverTomas Vanek1-1/+74
Change-Id: I8d2e29ed88a957d412473255e42b022a00dfb9cb Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4984 Tested-by: jenkins
2020-04-21jtag/drivers: add debugging support for Mellanox BlueField SoCLiming Sun3-0/+90
This commits adds debugging support for the Mellanox BlueField SoC via rshim, which is an interface accessible from external USB or PCIe (for SmartNIC case) via the rshim driver. It implements the arm dap interfaces based on the existing dapdirect framework. Change-Id: I18eb1c54293ec2c581f853e0e55b3f96d7978b56 Signed-off-by: Liming Sun <lsun@mellanox.com> Reviewed-on: http://openocd.zylin.com/5457 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
generated by cgit v1.1 at 2024-11-16 17:20:33 +0000