diff options
| author | Antonio Borneo <borneo.antonio@gmail.com> | 2020-04-26 01:07:27 +0200 |
|---|---|---|
| committer | Antonio Borneo <borneo.antonio@gmail.com> | 2020-05-09 14:38:40 +0100 |
| commit | 5df5e89cf3caf02dc6f49a5d3c8aa8b1349a1dbf (patch) | |
| tree | 14d9a553fd1d2d27c15f1b208569c5364e231493 /tcl | |
| parent | 6d3cb807aaa60c4a4cd8ed49ae7860097bc1b3ce (diff) | |
| download | riscv-openocd-5df5e89cf3caf02dc6f49a5d3c8aa8b1349a1dbf.zip riscv-openocd-5df5e89cf3caf02dc6f49a5d3c8aa8b1349a1dbf.tar.gz riscv-openocd-5df5e89cf3caf02dc6f49a5d3c8aa8b1349a1dbf.tar.bz2 | |
tcl: remove trailing whitespace
The script checkpatch available in new Linux kernel offers an
experimental feature for automatically fix the code in place.
While still experimental, the feature works quite well for simple
fixes, like spacing.
This patch has been created automatically with the script under
review for inclusion in OpenOCD, using the command:
find tcl/ -type f -exec ./tools/scripts/checkpatch.pl \
-q --types TRAILING_WHITESPACE --fix-inplace -f {} \;
The patch only changes amount and position of whitespace, thus
the following commands show empty diff
git diff -w
git log -w -p
git log -w --stat
Change-Id: Ie7e3a236f4db9c70019e3b3c7e851edbd3a9dd84
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5616
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
Diffstat (limited to 'tcl')
29 files changed, 140 insertions, 140 deletions
diff --git a/tcl/board/at91cap7a-stk-sdram.cfg b/tcl/board/at91cap7a-stk-sdram.cfg index df91a6b..8395ba3 100644 --- a/tcl/board/at91cap7a-stk-sdram.cfg +++ b/tcl/board/at91cap7a-stk-sdram.cfg @@ -43,13 +43,13 @@ proc wait_state {expression} { return } } - return -code 1 "Timed out" + return -code 1 "Timed out" } # Use a global variable here to be able to tinker interactively with # post reset jtag frequency. global post_reset_khz -# Danger!!!! Even 16MHz kinda works with this target, but +# Danger!!!! Even 16MHz kinda works with this target, but # it needs to be as low as 2000kHz to be stable. set post_reset_khz 2000 @@ -61,25 +61,25 @@ $_TARGETNAME configure -event reset-init { mww 0xfffffd08 0xa5000001 # Enable main oscillator mww 0xFFFFFc20 0x00000f01 - wait_state {expr {([peek32 0xFFFFFC68] & 0x1) == 0}} + wait_state {expr {([peek32 0xFFFFFC68] & 0x1) == 0}} # Set PLLA to 96MHz mww 0xFFFFFc28 0x20072801 - wait_state {expr {([peek32 0xFFFFFC68] & 0x2) == 0}} + wait_state {expr {([peek32 0xFFFFFC68] & 0x2) == 0}} # Select prescaler mww 0xFFFFFC30 0x00000004 - wait_state {expr {([peek32 0xFFFFFC68] & 0x8) == 0}} + wait_state {expr {([peek32 0xFFFFFC68] & 0x8) == 0}} # Select master clock to 48MHz mww 0xFFFFFC30 0x00000006 - wait_state {expr {([peek32 0xFFFFFC68] & 0x8) == 0}} + wait_state {expr {([peek32 0xFFFFFC68] & 0x8) == 0}} echo "Master clock ok." - + # Now that we're up and running, crank up speed! global post_reset_khz ; adapter speed $post_reset_khz - + echo "Configuring the SDRAM controller..." # Configure EBI Chip select for SDRAM @@ -95,7 +95,7 @@ $_TARGETNAME configure -event reset-init { # Configure SDRAMC CR mww 0xFFFFEA08 0xA63392F9 - + # NOP command mww 0xFFFFEA00 0x1 mww 0x20000000 0 @@ -151,7 +151,7 @@ $_TARGETNAME configure -event reset-init { #remap internal memory at address 0x0 mww 0xffffef00 0x3 - + echo "SDRAM configuration ok." } diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg index 9e0413a..03296c5 100644 --- a/tcl/board/at91sam9g20-ek.cfg +++ b/tcl/board/at91sam9g20-ek.cfg @@ -139,13 +139,13 @@ proc at91sam9g20_reset_init { } { # (MT29F2G08AACWP) can be established by setting four registers in order: SMC_SETUP3, # SMC_PULSE3, SMC_CYCLE3, and SMC_MODE3. Computing the exact values of these registers # is a little tedious to do here. If you have questions about how to do this, Atmel has - # a decent application note #6255B that covers this process. + # a decent application note #6255B that covers this process. mww 0xffffec30 0x00020002 ;# SMC_SETUP3 : 2 clock cycle setup for NRD and NWE mww 0xffffec34 0x04040404 ;# SMC_PULSE3 : 4 clock cycle pulse for all signals mww 0xffffec38 0x00070006 ;# SMC_CYCLE3 : 7 clock cycle NRD and 6 NWE cycle - mww 0xffffec3C 0x00020003 ;# SMC_MODE3 : NRD and NWE control, no NWAIT, 8-bit DBW, - + mww 0xffffec3C 0x00020003 ;# SMC_MODE3 : NRD and NWE control, no NWAIT, 8-bit DBW, + mww 0xffffe800 0x00000001 ;# ECC_CR : reset the ECC parity registers mww 0xffffe804 0x00000002 ;# ECC_MR : page size is 2112 words (word is 8 bits) diff --git a/tcl/board/hilscher_nxdb500sys.cfg b/tcl/board/hilscher_nxdb500sys.cfg index d71c445..20fa3ea 100644 --- a/tcl/board/hilscher_nxdb500sys.cfg +++ b/tcl/board/hilscher_nxdb500sys.cfg @@ -17,7 +17,7 @@ $_TARGETNAME configure -event reset-init { arm7_9 dcc_downloads enable sdram_fix - + puts "Configuring SDRAM controller for paired K4S561632C (64MB) " mww 0x00100140 0 mww 0x00100144 0x03C13261 diff --git a/tcl/board/hilscher_nxeb500hmi.cfg b/tcl/board/hilscher_nxeb500hmi.cfg index aa3d587..a51fa03 100644 --- a/tcl/board/hilscher_nxeb500hmi.cfg +++ b/tcl/board/hilscher_nxeb500hmi.cfg @@ -17,7 +17,7 @@ $_TARGETNAME configure -event reset-init { arm7_9 dcc_downloads disable sdram_fix - + puts "Configuring SDRAM controller for MT48LC8M32 (32MB) " mww 0x00100140 0 mww 0x00100144 0x03C23251 diff --git a/tcl/board/hilscher_nxsb100.cfg b/tcl/board/hilscher_nxsb100.cfg index 807e292..c332bee 100644 --- a/tcl/board/hilscher_nxsb100.cfg +++ b/tcl/board/hilscher_nxsb100.cfg @@ -17,7 +17,7 @@ $_TARGETNAME configure -event reset-init { arm7_9 dcc_downloads enable sdram_fix - + puts "Configuring SDRAM controller for MT48LC2M32 (8MB) " mww 0x00100140 0 mww 0x00100144 0x03C23251 diff --git a/tcl/board/imx31pdk.cfg b/tcl/board/imx31pdk.cfg index 502d407..2dce157 100644 --- a/tcl/board/imx31pdk.cfg +++ b/tcl/board/imx31pdk.cfg @@ -28,36 +28,36 @@ proc imx31pdk_init { } { mww 0x53FC0000 0x040 mww 0x53F80000 0x074B0B7D - + # 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40 #mww 0x53F80004 0xFF871D50 #mww 0x53F80010 0x00271C1B - + # Start 16 bit NorFlash Initialization on CS0 mww 0xb8002000 0x0000CC03 mww 0xb8002004 0xa0330D01 mww 0xb8002008 0x00220800 - + # Configure CPLD on CS4 mww 0xb8002040 0x0000DCF6 mww 0xb8002044 0x444A4541 mww 0xb8002048 0x44443302 - + # SDCLK mww 0x43FAC26C 0 - + # CAS mww 0x43FAC270 0 - + # RAS mww 0x43FAC274 0 - + # CS2 (CSD0) mww 0x43FAC27C 0x1000 - + # DQM3 mww 0x43FAC284 0 - + # DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) mww 0x43FAC288 0 mww 0x43FAC28C 0 @@ -81,7 +81,7 @@ proc imx31pdk_init { } { mww 0x43FAC2D4 0 mww 0x43FAC2D8 0 mww 0x43FAC2DC 0 - + # Initialization script for 32 bit DDR on MX31 ADS mww 0xB8001010 0x00000004 mww 0xB8001004 0x006ac73a diff --git a/tcl/board/imx35pdk.cfg b/tcl/board/imx35pdk.cfg index b81c0b0..2a7efab 100644 --- a/tcl/board/imx35pdk.cfg +++ b/tcl/board/imx35pdk.cfg @@ -8,9 +8,9 @@ $_TARGETNAME configure -event reset-init { imx35pdk_init } jtag_rclk 10 proc imx35pdk_init { } { - + imx3x_reset - + mww 0x43f00040 0x00000000 mww 0x43f00044 0x00000000 mww 0x43f00048 0x00000000 @@ -25,11 +25,11 @@ proc imx35pdk_init { } { mww 0x53f00050 0x00000000 mww 0x53f00000 0x77777777 mww 0x53f00004 0x77777777 - + # clock setup mww 0x53F80004 0x00821000 ;# first need to set IPU_HND_BYP mww 0x53F80004 0x00821000 ;#arm clock is 399Mhz and ahb clock is 133Mhz. - + #================================================= # WEIM config #================================================= @@ -45,14 +45,14 @@ proc imx35pdk_init { } { mww 0xB8002054 0x444a4541 # CS5A mww 0xB8002058 0x44443302 - + # IO SW PAD Control registers - setting of 0x0002 is high drive, mDDR mww 0x43FAC368 0x00000006 mww 0x43FAC36C 0x00000006 mww 0x43FAC370 0x00000006 mww 0x43FAC374 0x00000006 mww 0x43FAC378 0x00000006 - mww 0x43FAC37C 0x00000006 + mww 0x43FAC37C 0x00000006 mww 0x43FAC380 0x00000006 mww 0x43FAC384 0x00000006 mww 0x43FAC388 0x00000006 @@ -76,7 +76,7 @@ proc imx35pdk_init { } { mww 0x43FAC3D0 0x00000006 mww 0x43FAC3D4 0x00000006 mww 0x43FAC3D8 0x00000006 - + # DDR data bus SD 0 through 31 mww 0x43FAC3DC 0x00000082 mww 0x43FAC3E0 0x00000082 @@ -110,13 +110,13 @@ proc imx35pdk_init { } { mww 0x43FAC450 0x00000082 mww 0x43FAC454 0x00000082 mww 0x43FAC458 0x00000082 - + # DQM setup mww 0x43FAC45c 0x00000082 mww 0x43FAC460 0x00000082 mww 0x43FAC464 0x00000082 mww 0x43FAC468 0x00000082 - + mww 0x43FAC46c 0x00000006 mww 0x43FAC470 0x00000006 mww 0x43FAC474 0x00000006 @@ -130,30 +130,30 @@ proc imx35pdk_init { } { mww 0x43FAC494 0x00000006 mww 0x43FAC498 0x00000006 mww 0x43FAC49c 0x00000006 - mww 0x43FAC4A0 0x00000006 + mww 0x43FAC4A0 0x00000006 mww 0x43FAC4A4 0x00000006 ;# RAS mww 0x43FAC4A8 0x00000006 ;# CAS mww 0x43FAC4Ac 0x00000006 ;# SDWE mww 0x43FAC4B0 0x00000006 ;# SDCKE0 mww 0x43FAC4B4 0x00000006 ;# SDCKE1 mww 0x43FAC4B8 0x00000002 ;# SDCLK - + # SDQS0 through SDQS3 mww 0x43FAC4Bc 0x00000082 mww 0x43FAC4C0 0x00000082 mww 0x43FAC4C4 0x00000082 mww 0x43FAC4C8 0x00000082 - - + + # *================================================== # Initialization script for 32 bit DDR2 on RINGO 3DS # *================================================== - + #-------------------------------------------- # Init CCM #-------------------------------------------- mww 0x53F80028 0x7D000028 - + #-------------------------------------------- # Init IOMUX for JTAG #-------------------------------------------- @@ -164,24 +164,24 @@ proc imx35pdk_init { } { mww 0x43FAC5FC 0x000000F3 mww 0x43FAC600 0x000000F3 mww 0x43FAC604 0x000000F3 - - + + # ESD_MISC : enable DDR2 mww 0xB8001010 0x00000304 - + #-------------------------------------------- # Init 32-bit DDR2 memory on CSD0 # COL=10-bit, ROW=13-bit, BA[1:0]=Addr[26:25] #-------------------------------------------- - + # ESD_ESDCFG0 : set timing parameters - mww 0xB8001004 0x007ffC2f - + mww 0xB8001004 0x007ffC2f + # ESD_ESDCTL0 : select Prechare-All mode mww 0xB8001000 0x92220000 # DDR2 : Prechare-All mww 0x80000400 0x12345678 - + # ESD_ESDCTL0 : select Load-Mode-Register mode mww 0xB8001000 0xB2220000 # DDR2 : Load reg EMR2 @@ -192,18 +192,18 @@ proc imx35pdk_init { } { mwb 0x82000400 0xda # DDR2 : Load reg MR -- reset DLL mwb 0x80000333 0xda - + # ESD_ESDCTL0 : select Prechare-All mode mww 0xB8001000 0x92220000 # DDR2 : Prechare-All mwb 0x80000400 0x12345678 - + # ESD_ESDCTL0 : select Manual-Refresh mode mww 0xB8001000 0xA2220000 # DDR2 : Manual-Refresh 2 times mww 0x80000000 0x87654321 mww 0x80000000 0x87654321 - + # ESD_ESDCTL0 : select Load-Mode-Register mode mww 0xB8001000 0xB2220000 # DDR2 : Load reg MR -- CL=3, BL=8, end DLL reset @@ -212,19 +212,19 @@ proc imx35pdk_init { } { mwb 0x82000780 0xda # DDR2 : Load reg EMR1 -- OCD exit mwb 0x82000400 0xda ;# ODT disabled - + # ESD_ESDCTL0 : select normal-operation mode # DSIZ=32-bit, BL=8, COL=10-bit, ROW=13-bit # disable PWT & PRCT # disable Auto-Refresh mww 0xB8001000 0x82220080 - + ## ESD_ESDCTL0 : enable Auto-Refresh mww 0xB8001000 0x82228080 ## ESD_ESDCTL1 : enable Auto-Refresh mww 0xB8001008 0x00002000 - - + + #*********************************************** # Adjust the ESDCDLY5 register #*********************************************** @@ -233,20 +233,20 @@ proc imx35pdk_init { } { mww 0xB8001024 0x00F48000 ;# this is the default value mww 0xB8001028 0x00F48000 ;# this is the default value mww 0xB800102c 0x00F48000 ;# this is the default value - - + + #Then you can make force measure with the dedicated bit (Bit 7 at ESDMISC) mww 0xB8001010 0x00000384 # wait a while sleep 1000 # now clear the force measurement bit mww 0xB8001010 0x00000304 - + # dummy write to DDR memory to set DQS low mww 0x80000000 0x00000000 - + mww 0x30000100 0x0 mww 0x30000104 0x31024 - - + + } diff --git a/tcl/board/mcb1700.cfg b/tcl/board/mcb1700.cfg index 4954dab..01080a0 100644 --- a/tcl/board/mcb1700.cfg +++ b/tcl/board/mcb1700.cfg @@ -1,5 +1,5 @@ # Keil MCB1700 PCB with 1768 -# +# # Reset init script sets it to 100MHz set CCLK 100000 @@ -53,7 +53,7 @@ $_TARGETNAME configure -event reset-init { # Dividing CPU clock by 8 should be pretty conservative # - # + # global MCB1700_CCLK adapter speed [expr $MCB1700_CCLK / 8] diff --git a/tcl/board/olimex_sam9_l9260.cfg b/tcl/board/olimex_sam9_l9260.cfg index ad2f850..72dce87 100644 --- a/tcl/board/olimex_sam9_l9260.cfg +++ b/tcl/board/olimex_sam9_l9260.cfg @@ -23,15 +23,15 @@ $_TARGETNAME configure -event reset-start { # RCLK is not supported. jtag_rclk 5 halt - - # RSTC_MR : enable user reset, reset length is 64 slow clock cycles. MMU may + + # RSTC_MR : enable user reset, reset length is 64 slow clock cycles. MMU may # be enabled... use physical address. mww phys 0xfffffd08 0xa5000501 } $_TARGETNAME configure -event reset-init { mww 0xfffffd44 0x00008000 ;# WDT_MR : disable watchdog - + ## # Clock configuration for 99.328 MHz main clock. ## @@ -45,23 +45,23 @@ $_TARGETNAME configure -event reset-init { mww 0xfffffc30 0x00000101 ;# PMC_MCKR : no scale on proc clock, master is proc / 2 sleep 10 ;# wait 10 ms mww 0xfffffc30 0x00000102 ;# PMC_MCKR : switch to PLLA (99.328 MHz) - + # Increase JTAG speed to 6 MHz if RCLK is not supported. jtag_rclk 6000 - + arm7_9 dcc_downloads enable ;# Enable faster DCC downloads. - + ## # SDRAM configuration for 2 x Samsung K4S561632J-UC75, 4M x 16Bit x 4 Banks. ## echo "Configuring SDRAM" mww 0xfffff870 0xffff0000 ;# PIOC_ASR : select peripheral function for D15..D31 mww 0xfffff804 0xffff0000 ;# PIOC_PDR : disable PIO function for D15..D31 - + mww 0xffffef1c 0x00010002 ;# EBI_CSA : assign EBI CS1 to SDRAM, VDDIOMSEL set for +3V3 memory - + mww 0xffffea08 0x85237259 ;# SDRAMC_CR : configure SDRAM for Samsung chips - + mww 0xffffea00 0x1 ;# SDRAMC_MR : issue NOP command mww 0x20000000 0 mww 0xffffea00 0x2 ;# SDRAMC_MR : issue an 'All Banks Precharge' command @@ -86,7 +86,7 @@ $_TARGETNAME configure -event reset-init { mww 0x20000000 0 mww 0xffffea00 0x0 ;# SDRAMC_MR : normal mode mww 0x20000000 0 - + mww 0xffffea04 0x2b6 ;# SDRAMC_TR : set refresh timer count to 7 us ## @@ -99,37 +99,37 @@ $_TARGETNAME configure -event reset-init { mww 0xfffff814 0x00002000 ;# PIOC_ODR : disable output on 13 mww 0xfffff830 0x00004000 ;# PIOC_SODR : set 14 to disable NAND mww 0xfffff864 0x00002000 ;# PIOC_PUER : enable pull-up on 13 - + mww 0xffffef1c 0x0001000A ;# EBI_CSA : assign EBI CS3 to NAND, same settings as before - + mww 0xffffec30 0x00010001 ;# SMC_SETUP3 : 1 clock cycle setup for NRD and NWE mww 0xffffec34 0x03030303 ;# SMC_PULSE3 : 3 clock cycle pulse for all signals mww 0xffffec38 0x00050005 ;# SMC_CYCLE3 : 5 clock cycle NRD and NWE cycle - mww 0xffffec3C 0x00020003 ;# SMC_MODE3 : NRD and NWE control, no NWAIT, 8-bit DBW, + mww 0xffffec3C 0x00020003 ;# SMC_MODE3 : NRD and NWE control, no NWAIT, 8-bit DBW, # 3 TDF cycles, no optimization - + mww 0xffffe800 0x00000001 ;# ECC_CR : reset the ECC parity registers mww 0xffffe804 0x00000002 ;# ECC_MR : page size is 2112 words (word is 8 bits) - + nand probe at91sam9260.flash - + ## # Dataflash configuration for 1 x Atmel AT45DB161D, 16Mbit ## echo "Setting up dataflash" - mww 0xfffff404 0x00000807 ;# PIOA_PDR : disable PIO function for 0(SPI0_MISO), 1(SPI0_MOSI), + mww 0xfffff404 0x00000807 ;# PIOA_PDR : disable PIO function for 0(SPI0_MISO), 1(SPI0_MOSI), # 2(SPI0_SPCK), and 11(SPI0_NPCS1) mww 0xfffff470 0x00000007 ;# PIOA_ASR : select peripheral A function for 0, 1, and 2 mww 0xfffff474 0x00000800 ;# PIOA_BSR : select peripheral B function for 11 mww 0xfffffc10 0x00001000 ;# PMC_PCER : enable SPI0 clock - + mww 0xfffc8000 0x00000080 ;# SPI0_CR : software reset SPI0 mww 0xfffc8000 0x00000080 ;# SPI0_CR : again to be sure mww 0xfffc8004 0x000F0011 ;# SPI0_MR : master mode with nothing selected - - mww 0xfffc8034 0x011a0302 ;# SPI0_CSR1 : capture on leading edge, 8-bits/tx. 33MHz baud, + + mww 0xfffc8034 0x011a0302 ;# SPI0_CSR1 : capture on leading edge, 8-bits/tx. 33MHz baud, # 250ns delay before SPCK, 250ns b/n tx - + mww 0xfffc8004 0x000D0011 ;# SPI0_MR : same config, select NPCS1 mww 0xfffc8000 0x00000001 ;# SPI0_CR : enable SPI0 } diff --git a/tcl/board/phytec_lpc3250.cfg b/tcl/board/phytec_lpc3250.cfg index 1c48f5d..cee28cd 100644 --- a/tcl/board/phytec_lpc3250.cfg +++ b/tcl/board/phytec_lpc3250.cfg @@ -23,12 +23,12 @@ $_TARGETNAME configure -event reset-init { phytec_lpc3250_init } # Bare-bones initialization of core clocks and SDRAM proc phytec_lpc3250_init { } { - # Set clock dividers + # Set clock dividers # ARMCLK = 266.5 MHz # HCLK = 133.25 MHz # PERIPHCLK = 13.325 MHz mww 0x400040BC 0 - mww 0x40004050 0x140 + mww 0x40004050 0x140 mww 0x40004040 0x4D mww 0x40004058 0x16250 @@ -37,7 +37,7 @@ proc phytec_lpc3250_init { } { sleep 1 busy mww 0x40004044 0x106 sleep 1 busy - mww 0x40004044 0x006 + mww 0x40004044 0x006 sleep 1 busy mww 0x40004048 0x2 @@ -49,7 +49,7 @@ proc phytec_lpc3250_init { } { mww 0x31080008 0 mww 0x40004068 0x1C000 mww 0x31080028 0x11 - + mww 0x31080400 0 mww 0x31080440 0 mww 0x31080460 0 @@ -66,7 +66,7 @@ proc phytec_lpc3250_init { } { mww 0x31080054 1 mww 0x31080058 1 mww 0x3108005C 0 - + mww 0x31080100 0x5680 mww 0x31080104 0x302 diff --git a/tcl/board/rsc-w910.cfg b/tcl/board/rsc-w910.cfg index cb1733b..574de0c 100644 --- a/tcl/board/rsc-w910.cfg +++ b/tcl/board/rsc-w910.cfg @@ -33,7 +33,7 @@ $_TARGETNAME configure -event reset-start {adapter speed 1000} $_TARGETNAME configure -event reset-init { # switch on PLL for 200MHz operation # running from 15MHz input clock - + mww 0xB0000200 0x00000030 ;# CLKEN mww 0xB0000204 0x00000f3c ;# CLKSEL mww 0xB0000208 0x05007000 ;# CLKDIV @@ -41,17 +41,17 @@ $_TARGETNAME configure -event reset-init { mww 0xB0000210 0x00002b63 ;# PLLCON1 mww 0xB000000C 0x08817fa6 ;# MFSEL sleep 10 - + # we are now running @ 200MHz # enable all openocd speed tweaks - + arm7_9 dcc_downloads enable arm7_9 fast_memory_access enable adapter speed 15000 - + # map nor flash to 0x20000000 # map sdram to 0x00000000 - + mww 0xb0001000 0x000530c1 ;# EBICON mww 0xb0001004 0x40030084 ;# ROMCON mww 0xb0001008 0x000010ee ;# SDCONF0 diff --git a/tcl/board/stm3210e_eval.cfg b/tcl/board/stm3210e_eval.cfg index 91807ce..f30253c 100644 --- a/tcl/board/stm3210e_eval.cfg +++ b/tcl/board/stm3210e_eval.cfg @@ -17,11 +17,11 @@ flash bank $_FLASHNAME cfi 0x64000000 0x01000000 2 2 $_TARGETNAME proc stm32_enable_fsmc {} { echo "Enabling FSMC Bank 1 (NOR/PSRAM Bank 2)" - + # enable gpio (defg) clocks for fsmc # RCC_APB2ENR mww 0x40021018 0x000001E0 - + # enable fsmc clock # RCC_AHBENR mww 0x40021014 0x00000114 @@ -31,29 +31,29 @@ proc stm32_enable_fsmc {} { mww 0x40011400 0x44BB44BB # GPIOD_CRH mww 0x40011404 0xBBBBBBBB - + # GPIOE_CRL mww 0x40011800 0xBBBBB444 # GPIOE_CRH mww 0x40011804 0xBBBBBBBB - + # GPIOF_CRL mww 0x40011C00 0x44BBBBBB # GPIOF_CRH mww 0x40011C04 0xBBBB4444 - + # GPIOG_CRL mww 0x40012000 0x44BBBBBB # GPIOG_CRH mww 0x40012004 0x444444B4 - + # setup fsmc timings # FSMC_BCR1 mww 0xA0000008 0x00001058 - + # FSMC_BTR1 mww 0xA000000C 0x10000502 - + # FSMC_BCR1 - enable fsmc mww 0xA0000008 0x00001059 } diff --git a/tcl/board/uptech_2410.cfg b/tcl/board/uptech_2410.cfg index 680cfd7..227cf42 100644 --- a/tcl/board/uptech_2410.cfg +++ b/tcl/board/uptech_2410.cfg @@ -11,28 +11,28 @@ proc init_pll_sdram { } { #echo "---------- Initializing PLL and SDRAM ---------" #watchdog timer disable mww phys 0x53000000 0x00000000 - + #disable all interrupts mww phys 0x4a000008 0xffffffff - + #disable all sub-interrupts mww phys 0x4a00001c 0x000007ff - + #clear all source pending bits mww phys 0x4a000000 0xffffffff - + #clear all sub-source pending bits mww phys 0x4a000018 0x000007ff - + #clear interrupt pending bit mww phys 0x4a000010 0xffffffff - + #PLL locktime counter mww phys 0x4c000000 0x00ffffff - + #Fin=12MHz Fout=202.8MHz #mww phys 0x4c000004 0x000a1031 - + #FCLK:HCLK:PCLK = 1:2:4 mww phys 0x4c000014 0x00000003 diff --git a/tcl/target/dsp56321.cfg b/tcl/target/dsp56321.cfg index 0ac0ce8..78ecb3b 100644 --- a/tcl/target/dsp56321.cfg +++ b/tcl/target/dsp56321.cfg @@ -1,13 +1,13 @@ # Script for freescale DSP56321 # -if { [info exists CHIPNAME] } { +if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { set _CHIPNAME dsp56321 } -if { [info exists ENDIAN] } { +if { [info exists ENDIAN] } { set _ENDIAN $ENDIAN } else { # this defaults to a big endian diff --git a/tcl/target/dsp568013.cfg b/tcl/target/dsp568013.cfg index 40fa3c2..67d4419 100644 --- a/tcl/target/dsp568013.cfg +++ b/tcl/target/dsp568013.cfg @@ -1,12 +1,12 @@ # Script for freescale DSP568013 -if { [info exists CHIPNAME] } { +if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { set _CHIPNAME dsp568013 } -if { [info exists ENDIAN] } { +if { [info exists ENDIAN] } { set _ENDIAN $ENDIAN } else { # this defaults to a big endian diff --git a/tcl/target/fm3.cfg b/tcl/target/fm3.cfg index 376320e..544cff9 100644 --- a/tcl/target/fm3.cfg +++ b/tcl/target/fm3.cfg @@ -36,10 +36,10 @@ dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap -# MB9BF506 has 64kB of SRAM on its main system bus +# MB9BF506 has 64kB of SRAM on its main system bus $_TARGETNAME configure -work-area-phys 0x1FFF8000 -work-area-size 0x10000 -work-area-backup 0 -# MB9BF506 has 512kB internal FLASH +# MB9BF506 has 512kB internal FLASH set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME diff --git a/tcl/target/imx.cfg b/tcl/target/imx.cfg index 9eea53e..ccfddb6 100644 --- a/tcl/target/imx.cfg +++ b/tcl/target/imx.cfg @@ -6,7 +6,7 @@ set TARGETNAME $_TARGETNAME # rewrite commands of the form below to arm11 mcr... # Data.Set c15:0x042f %long 0x40000015 proc setc15 {regs value} { - global TARGETNAME + global TARGETNAME echo [format "set p15 0x%04x, 0x%08x" $regs $value] diff --git a/tcl/target/ixp42x.cfg b/tcl/target/ixp42x.cfg index 3f86e35..624fe29 100644 --- a/tcl/target/ixp42x.cfg +++ b/tcl/target/ixp42x.cfg @@ -66,8 +66,8 @@ set IXP42x_SDRAM_256MB_32Mx16_2BANK 0x0015 # helper function to init SDRAM on IXP42x. # SDRAM_CFG: one of IXP42X_SDRAM_xxx -# REFRESH: refresh counter reload value (integer) -# CASLAT: 2 or 3 +# REFRESH: refresh counter reload value (integer) +# CASLAT: 2 or 3 proc ixp42x_init_sdram { SDRAM_CFG REFRESH CASLAT } { switch $CASLAT { diff --git a/tcl/target/lpc2103.cfg b/tcl/target/lpc2103.cfg index f55777f..131b9ef 100644 --- a/tcl/target/lpc2103.cfg +++ b/tcl/target/lpc2103.cfg @@ -15,7 +15,7 @@ proc setup_lpc2103 {core_freq_khz adapter_freq_khz} { proc init_targets {} { # default to core clocked with 12MHz crystal echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different." - + # setup_lpc2103 <core_freq_khz> <adapter_freq_khz> setup_lpc2103 12000 1500 } diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg index 0251738..ddbde22 100644 --- a/tcl/target/lpc2124.cfg +++ b/tcl/target/lpc2124.cfg @@ -15,7 +15,7 @@ proc setup_lpc2124 {core_freq_khz adapter_freq_khz} { proc init_targets {} { # default to core clocked with 12MHz crystal echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different." - + # setup_lpc2124 <core_freq_khz> <adapter_freq_khz> setup_lpc2124 12000 1500 } diff --git a/tcl/target/lpc2129.cfg b/tcl/target/lpc2129.cfg index 2c33cde..a1c3fe7 100644 --- a/tcl/target/lpc2129.cfg +++ b/tcl/target/lpc2129.cfg @@ -15,7 +15,7 @@ proc setup_lpc2129 {core_freq_khz adapter_freq_khz} { proc init_targets {} { # default to core clocked with 12MHz crystal echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different." - + # setup_lpc2129 <core_freq_khz> <adapter_freq_khz> setup_lpc2129 12000 1500 } diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg index f3a2011..503a682 100644 --- a/tcl/target/lpc2148.cfg +++ b/tcl/target/lpc2148.cfg @@ -15,7 +15,7 @@ proc setup_lpc2148 {core_freq_khz adapter_freq_khz} { proc init_targets {} { # default to core clocked with 12MHz crystal echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different." - + # setup_lpc2148 <core_freq_khz> <adapter_freq_khz> setup_lpc2148 12000 1500 } diff --git a/tcl/target/lpc2294.cfg b/tcl/target/lpc2294.cfg index 83d595d..1320cda 100644 --- a/tcl/target/lpc2294.cfg +++ b/tcl/target/lpc2294.cfg @@ -9,7 +9,7 @@ source [find target/lpc2xxx.cfg] proc setup_lpc2294 {core_freq_khz adapter_freq_khz} { # 256kB flash and 16kB SRAM # setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz> - + # !! TAPID unknown !! setup_lpc2xxx lpc2294 0xffffffff 0x40000 lpc2000_v1 0x4000 $core_freq_khz $adapter_freq_khz } @@ -17,7 +17,7 @@ proc setup_lpc2294 {core_freq_khz adapter_freq_khz} { proc init_targets {} { # default to core clocked with 12MHz crystal echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different." - + # setup_lpc2294 <core_freq_khz> <adapter_freq_khz> setup_lpc2294 12000 1500 } diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg index 0b66b82..235456a 100644 --- a/tcl/target/lpc2378.cfg +++ b/tcl/target/lpc2378.cfg @@ -15,7 +15,7 @@ proc setup_lpc2378 {core_freq_khz adapter_freq_khz} { proc init_targets {} { # default to core clocked with 4MHz internal oscillator echo "Warning - assuming default core clock 4MHz! Flashing may fail if actual core clock is different." - + # setup_lpc2378 <core_freq_khz> <adapter_freq_khz> setup_lpc2378 4000 500 } diff --git a/tcl/target/lpc2460.cfg b/tcl/target/lpc2460.cfg index 69fdc4a..c229f6d 100644 --- a/tcl/target/lpc2460.cfg +++ b/tcl/target/lpc2460.cfg @@ -15,7 +15,7 @@ proc setup_lpc2460 {core_freq_khz adapter_freq_khz} { proc init_targets {} { # default to core clocked with 4MHz internal oscillator echo "Warning - assuming default core clock 4MHz! Flashing may fail if actual core clock is different." - + # setup_lpc2460 <core_freq_khz> <adapter_freq_khz> setup_lpc2460 4000 500 } diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg index 48e5bdf..36b5c46 100644 --- a/tcl/target/lpc2478.cfg +++ b/tcl/target/lpc2478.cfg @@ -15,7 +15,7 @@ proc setup_lpc2478 {core_freq_khz adapter_freq_khz} { proc init_targets {} { # default to core clocked with 4MHz internal oscillator echo "Warning - assuming default core clock 4MHz! Flashing may fail if actual core clock is different." - + # setup_lpc2478 <core_freq_khz> <adapter_freq_khz> setup_lpc2478 4000 500 } diff --git a/tcl/target/lpc2xxx.cfg b/tcl/target/lpc2xxx.cfg index 4c3394c..f947c1b 100644 --- a/tcl/target/lpc2xxx.cfg +++ b/tcl/target/lpc2xxx.cfg @@ -40,5 +40,5 @@ proc setup_lpc2xxx {chip_name cputapids flash_size flash_variant workarea_size c proc init_targets {} { # FIX!!! read out CPUTAPID here and choose right setup. In addition to the # CPUTAPID some querying of the target would be required. - return -error "This is a generic LPC2xxx configuration file, use a specific target file." + return -error "This is a generic LPC2xxx configuration file, use a specific target file." } diff --git a/tcl/target/lpc3131.cfg b/tcl/target/lpc3131.cfg index d6f2cdb..89bbf02 100644 --- a/tcl/target/lpc3131.cfg +++ b/tcl/target/lpc3131.cfg @@ -56,7 +56,7 @@ adapter srst delay 1000 jtag_ntrst_delay 0 set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME $_TARGETNAME invoke-event halted diff --git a/tcl/target/u8500.cfg b/tcl/target/u8500.cfg index baef9c8..36e0db7 100644 --- a/tcl/target/u8500.cfg +++ b/tcl/target/u8500.cfg @@ -1,6 +1,6 @@ # Copyright (C) ST-Ericsson SA 2011 # Author : michel.jaouen@stericsson.com -# U8500 target +# U8500 target proc mmu_off {} { set cp [arm mrc 15 0 1 0 0] @@ -31,7 +31,7 @@ proc ocd_gdb_restart {target_id} { proc smp_reg {} { global _TARGETNAME_1 global _TARGETNAME_2 - targets $_TARGETNAME_1 + targets $_TARGETNAME_1 echo "$_TARGETNAME_1" set pc1 [reg pc] set stck1 [reg sp_svc] @@ -68,7 +68,7 @@ proc pwrsts { } { 8 { echo "A9 100% DVFS" } - c { + c { echo "A9 50% DVFS" } } @@ -144,7 +144,7 @@ tcl_port 5555 telnet_port 4444 gdb_port 3333 -if { [info exists CHIPNAME] } { +if { [info exists CHIPNAME] } { global _CHIPNAME set _CHIPNAME $CHIPNAME } else { @@ -194,12 +194,12 @@ set _TARGETNAME_1 $TARGETNAME_1 if { [info exists DAP_DBG1] } { set _DAP_DBG1 $DAP_DBG1 } else { - set _DAP_DBG1 0x801A8000 + set _DAP_DBG1 0x801A8000 } if { [info exists DAP_DBG2] } { set _DAP_DBG2 $DAP_DBG2 } else { - set _DAP_DBG2 0x801AA000 + set _DAP_DBG2 0x801AA000 } dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu @@ -226,7 +226,7 @@ global _SMP set _SMP $SMP } global SMP -if { $_SMP == 1} { +if { $_SMP == 1} { target smp $_CHIPNAME.cpu2 $_CHIPNAME.cpu1 } @@ -264,7 +264,7 @@ proc att { } { } else { echo "target secured" } - + } @@ -310,10 +310,10 @@ if {![info exists MAXSPEED]} { global _MAXSPEED set _MAXSPEED 15000 } else { -global _MAXSPEED +global _MAXSPEED set _MAXSPEED $MAXSPEED } -global _MAXSPEED +global _MAXSPEED adapter speed $_MAXSPEED |