tcl/target/nrf52.cfg: detect AP lock and add command to recover

Change-Id: I8d2e29ed88a957d412473255e42b022a00dfb9cb
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4984
Tested-by: jenkins

1 files changed, 74 insertions, 1 deletions

diff --git a/tcl/target/nrf52.cfg b/tcl/target/nrf52.cfg
index 00901bf..88f2c69 100644
--- a/tcl/target/nrf52.cfg
+++ b/tcl/target/nrf52.cfg
@@ -34,9 +34,82 @@ adapter speed 1000
 
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
-if { ![using_hla] } {
+if { [using_hla] } {
+	echo ""
+	echo "nRF52 device has a CTRL-AP dedicated to recover the device from AP lock."
+	echo "A high level adapter (like a ST-Link) you are currently using cannot access"
+	echo "the CTRL-AP so 'nrf52_recover' command will not work."
+	echo "Do not enable UICR APPROTECT."
+	echo ""
+} else {
 	cortex_m reset_config sysresetreq
+
+	$_TARGETNAME configure -event examine-fail nrf52_check_ap_lock
 }
 
 flash bank $_CHIPNAME.flash nrf5 0x00000000 0 1 1 $_TARGETNAME
 flash bank $_CHIPNAME.uicr nrf5 0x10001000 0 1 1 $_TARGETNAME
+
+# Test if MEM-AP is locked by UICR APPROTECT
+proc nrf52_check_ap_lock {} {
+	set dap [[target current] cget -dap]
+	set err [catch {set APPROTECTSTATUS [ocd_$dap apreg 1 0xc]}]
+	if {$err == 0 && $APPROTECTSTATUS != 1} {
+		echo "****** WARNING ******"
+		echo "nRF52 device has AP lock engaged (see UICR APPROTECT register)."
+		echo "Debug access is denied."
+		echo "Use 'nrf52_recover' to erase and unlock the device."
+		echo ""
+		poll off
+	}
+}
+
+# Mass erase and unlock the device using proprietary nRF CTRL-AP (AP #1)
+# http://www.ebyte.com produces modules with nRF52 locked by default,
+# use nrf52_recover to enable flashing and debug.
+proc nrf52_recover {} {
+	set target [target current]
+	set dap [$target cget -dap]
+
+	set IDR [ocd_$dap apreg 1 0xfc]
+	if {$IDR != 0x02880000} {
+		echo "Error: Cannot access nRF52 CTRL-AP!"
+		return
+	}
+
+	poll off
+
+	# Assert reset
+	$dap apreg 1 0 1
+
+	# Reset ERASEALLSTATUS event
+	$dap apreg 1 8 0
+
+	# Trigger ERASEALL task
+	$dap apreg 1 4 0
+	$dap apreg 1 4 1
+
+	for {set i 0} {1} {incr i} {
+		set ERASEALLSTATUS [ocd_$dap apreg 1 8]
+		if {$ERASEALLSTATUS == 1} {
+			echo "$target device has been successfully erased and unlocked."
+			break
+		}
+		if {$i >= 5} {
+			echo "Error: $target recovery failed."
+			break
+		}
+		sleep 100
+	}
+
+	# Deassert reset
+	$dap apreg 1 0 0
+
+	if {$ERASEALLSTATUS == 1} {
+		sleep 100
+		$target arp_examine
+		poll on
+	}
+}
+
+add_help_text nrf52_recover "Mass erase and unlock nRF52 device"