diff options
Diffstat (limited to 'tcl')
-rw-r--r-- | tcl/target/omap2420.cfg | 7 | ||||
-rw-r--r-- | tcl/target/omap5912.cfg | 9 | ||||
-rw-r--r-- | tcl/target/ti_dm355.cfg | 15 | ||||
-rw-r--r-- | tcl/target/ti_dm365.cfg | 9 | ||||
-rw-r--r-- | tcl/target/ti_dm6446.cfg | 11 |
5 files changed, 13 insertions, 38 deletions
diff --git a/tcl/target/omap2420.cfg b/tcl/target/omap2420.cfg index 0155749..866b4a3 100644 --- a/tcl/target/omap2420.cfg +++ b/tcl/target/omap2420.cfg @@ -6,11 +6,6 @@ if { [info exists CHIPNAME] } { } else { set _CHIPNAME omap2420 } -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} # NOTE: likes slowish clock on reset (1.5 MBit/s or less) or use RCLK @@ -46,7 +41,7 @@ jtag newtap $_CHIPNAME jrc -irlen 2 -ircapture 0x1 -irmask 0x3 -expected-id $_JR # GDB target: the ARM. set _TARGETNAME $_CHIPNAME.arm -target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME +target create $_TARGETNAME arm11 -chain-position $_TARGETNAME # scratch: framebuffer, may be initially unavailable in some chips $_TARGETNAME configure -work-area-phys 0x40210000 diff --git a/tcl/target/omap5912.cfg b/tcl/target/omap5912.cfg index fa0fc9e..30650cf 100644 --- a/tcl/target/omap5912.cfg +++ b/tcl/target/omap5912.cfg @@ -7,13 +7,6 @@ if { [info exists CHIPNAME] } { set _CHIPNAME omap5912 } -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - # this defaults to a bigendian - set _ENDIAN little -} - if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { @@ -30,7 +23,7 @@ jtag newtap $_CHIPNAME arm -irlen 4 -expected-id $_CPUTAPID jtag newtap $_CHIPNAME unknown -irlen 8 set _TARGETNAME $_CHIPNAME.arm -target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME +target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME proc omap5912_reset {} { # diff --git a/tcl/target/ti_dm355.cfg b/tcl/target/ti_dm355.cfg index 67b3f7a..b1e19e9 100644 --- a/tcl/target/ti_dm355.cfg +++ b/tcl/target/ti_dm355.cfg @@ -6,11 +6,6 @@ if { [info exists CHIPNAME] } { } else { set _CHIPNAME dm355 } -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} # TI boards default to EMU0/EMU1 *high* -- ARM and ETB are *disabled* # after JTAG reset until ICEpick is used to route them in. @@ -33,8 +28,7 @@ if { [info exists ETB_TAPID ] } { } else { set _ETB_TAPID 0x2b900f0f } -jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf \ - -expected-id $_ETB_TAPID $EMU01 +jtag newtap $_CHIPNAME etb -irlen 4 -irmask 0xf -expected-id $_ETB_TAPID $EMU01 jtag configure $_CHIPNAME.etb -event tap-enable \ "icepick_c_tapenable $_CHIPNAME.jrc 1" @@ -44,8 +38,7 @@ if { [info exists CPU_TAPID ] } { } else { set _CPU_TAPID 0x07926001 } -jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf \ - -expected-id $_CPU_TAPID $EMU01 +jtag newtap $_CHIPNAME arm -irlen 4 -irmask 0xf -expected-id $_CPU_TAPID $EMU01 jtag configure $_CHIPNAME.arm -event tap-enable \ "icepick_c_tapenable $_CHIPNAME.jrc 0" @@ -55,7 +48,7 @@ if { [info exists JRC_TAPID ] } { } else { set _JRC_TAPID 0x0b73b02f } -jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID +jtag newtap $_CHIPNAME jrc -irlen 6 -irmask 0x3f -expected-id $_JRC_TAPID ################ @@ -89,7 +82,7 @@ source [find target/davinci.cfg] # and the ETB memory (4K) are other options, while trace is unused. set _TARGETNAME $_CHIPNAME.arm -target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME +target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME # NOTE that work-area-virt presumes a Linux 2.6.30-rc2+ kernel, # and that the work area is used only with a kernel mmu context ... diff --git a/tcl/target/ti_dm365.cfg b/tcl/target/ti_dm365.cfg index 06a52d2..3a17d1a 100644 --- a/tcl/target/ti_dm365.cfg +++ b/tcl/target/ti_dm365.cfg @@ -24,8 +24,7 @@ if { [info exists ETB_TAPID ] } { } else { set _ETB_TAPID 0x2b900f0f } -jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf \ - -expected-id $_ETB_TAPID $EMU01 +jtag newtap $_CHIPNAME etb -irlen 4 -irmask 0xf -expected-id $_ETB_TAPID $EMU01 jtag configure $_CHIPNAME.etb -event tap-enable \ "icepick_c_tapenable $_CHIPNAME.jrc 1" @@ -35,8 +34,7 @@ if { [info exists CPU_TAPID ] } { } else { set _CPU_TAPID 0x0792602f } -jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf \ - -expected-id $_CPU_TAPID $EMU01 +jtag newtap $_CHIPNAME arm -irlen 4 -irmask 0xf -expected-id $_CPU_TAPID $EMU01 jtag configure $_CHIPNAME.arm -event tap-enable \ "icepick_c_tapenable $_CHIPNAME.jrc 0" @@ -46,8 +44,7 @@ if { [info exists JRC_TAPID ] } { } else { set _JRC_TAPID 0x0b83e02f } -jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \ - -expected-id $_JRC_TAPID +jtag newtap $_CHIPNAME jrc -irlen 6 -irmask 0x3f -expected-id $_JRC_TAPID ################ diff --git a/tcl/target/ti_dm6446.cfg b/tcl/target/ti_dm6446.cfg index cc23ad4..e96c3e1 100644 --- a/tcl/target/ti_dm6446.cfg +++ b/tcl/target/ti_dm6446.cfg @@ -20,7 +20,7 @@ set EMU01 "-enable" #set EMU01 "-disable" # Subsidiary TAP: unknown ... must enable via ICEpick -jtag newtap $_CHIPNAME unknown -irlen 8 -ircapture 0xff -irmask 0xff -disable +jtag newtap $_CHIPNAME unknown -irlen 8 -disable jtag configure $_CHIPNAME.unknown -event tap-enable \ "icepick_c_tapenable $_CHIPNAME.jrc 3" @@ -35,8 +35,7 @@ if { [info exists ETB_TAPID ] } { } else { set _ETB_TAPID 0x2b900f0f } -jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf \ - -expected-id $_ETB_TAPID $EMU01 +jtag newtap $_CHIPNAME etb -irlen 4 -irmask 0xf -expected-id $_ETB_TAPID $EMU01 jtag configure $_CHIPNAME.etb -event tap-enable \ "icepick_c_tapenable $_CHIPNAME.jrc 1" @@ -46,8 +45,7 @@ if { [info exists CPU_TAPID ] } { } else { set _CPU_TAPID 0x07926001 } -jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf \ - -expected-id $_CPU_TAPID $EMU01 +jtag newtap $_CHIPNAME arm -irlen 4 -irmask 0xf -expected-id $_CPU_TAPID $EMU01 jtag configure $_CHIPNAME.arm -event tap-enable \ "icepick_c_tapenable $_CHIPNAME.jrc 0" @@ -57,8 +55,7 @@ if { [info exists JRC_TAPID ] } { } else { set _JRC_TAPID 0x0b70002f } -jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \ - -expected-id $_JRC_TAPID +jtag newtap $_CHIPNAME jrc -irlen 6 -irmask 0x3f -expected-id $_JRC_TAPID # GDB target: the ARM, using SRAM1 for scratch. SRAM0 (also 8K) # and the ETB memory (4K) are other options, while trace is unused. |