diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/jtag/drivers/cmsis_dap_usb_bulk.c | 233 |
1 files changed, 157 insertions, 76 deletions
diff --git a/src/jtag/drivers/cmsis_dap_usb_bulk.c b/src/jtag/drivers/cmsis_dap_usb_bulk.c index b82e3da..0134c03 100644 --- a/src/jtag/drivers/cmsis_dap_usb_bulk.c +++ b/src/jtag/drivers/cmsis_dap_usb_bulk.c @@ -81,7 +81,8 @@ static int cmsis_dap_usb_open(struct cmsis_dap *dap, uint16_t vids[], uint16_t p /* Match VID/PID */ - bool id_match = true; /* match if we don't enter the loop (no filter) */ + bool id_match = false; + bool id_filter = vids[0] || pids[0]; for (int id = 0; vids[id] || pids[id]; id++) { id_match = !vids[id] || dev_desc.idVendor == vids[id]; id_match &= !pids[id] || dev_desc.idProduct == pids[id]; @@ -90,7 +91,7 @@ static int cmsis_dap_usb_open(struct cmsis_dap *dap, uint16_t vids[], uint16_t p break; } - if (!id_match) + if (id_filter && !id_match) continue; /* Don't continue if we asked for a serial number and the device doesn't have one */ @@ -103,7 +104,7 @@ static int cmsis_dap_usb_open(struct cmsis_dap *dap, uint16_t vids[], uint16_t p /* It's to be expected that most USB devices can't be opened * so only report an error if it was explicitly selected */ - if (vids[0] || pids[0]) { + if (id_filter) { LOG_ERROR("could not open device 0x%04x:0x%04x: %s", dev_desc.idVendor, dev_desc.idProduct, libusb_strerror(err)); } else { @@ -115,7 +116,7 @@ static int cmsis_dap_usb_open(struct cmsis_dap *dap, uint16_t vids[], uint16_t p /* Match serial number */ - bool serial_match = (serial == NULL); + bool serial_match = false; char dev_serial[256] = {0}; if (dev_desc.iSerialNumber > 0) { err = libusb_get_string_descriptor_ascii( @@ -123,35 +124,44 @@ static int cmsis_dap_usb_open(struct cmsis_dap *dap, uint16_t vids[], uint16_t p (uint8_t *)dev_serial, sizeof(dev_serial)); if (err < 0) { - LOG_ERROR("could not read serial number for device 0x%04x:0x%04x: %s", - dev_desc.idVendor, dev_desc.idProduct, libusb_strerror(err)); + const char *msg = "could not read serial number for device 0x%04x:0x%04x: %s"; + if (serial) + LOG_WARNING(msg, dev_desc.idVendor, dev_desc.idProduct, + libusb_strerror(err)); + else + LOG_DEBUG(msg, dev_desc.idVendor, dev_desc.idProduct, + libusb_strerror(err)); } else if (serial && strncmp(dev_serial, serial, sizeof(dev_serial)) == 0) { serial_match = true; } } - if (!serial_match) { + if (serial && !serial_match) { libusb_close(dev_handle); continue; } /* Find the CMSIS-DAP string in product string */ - bool cmsis_dap_found = false; + bool cmsis_dap_in_product_str = false; char product_string[256] = {0}; if (dev_desc.iProduct > 0) { err = libusb_get_string_descriptor_ascii( dev_handle, dev_desc.iProduct, (uint8_t *)product_string, sizeof(product_string)); if (err < 0) { - LOG_ERROR("could not read product string for device 0x%04x:0x%04x: %s", + LOG_WARNING("could not read product string for device 0x%04x:0x%04x: %s", dev_desc.idVendor, dev_desc.idProduct, libusb_strerror(err)); } else if (strstr(product_string, "CMSIS-DAP")) { - LOG_DEBUG("CMSIS-DAP found in product string"); - cmsis_dap_found = true; + LOG_DEBUG("found product string of 0x%04x:0x%04x '%s'", + dev_desc.idVendor, dev_desc.idProduct, product_string); + cmsis_dap_in_product_str = true; } } + bool device_identified_reliably = cmsis_dap_in_product_str + || serial_match || id_match; + /* Find the CMSIS-DAP interface */ for (int config = 0; config < dev_desc.bNumConfigurations; config++) { @@ -163,7 +173,11 @@ static int cmsis_dap_usb_open(struct cmsis_dap *dap, uint16_t vids[], uint16_t p continue; } + LOG_DEBUG("enumerating interfaces of 0x%04x:0x%04x", + dev_desc.idVendor, dev_desc.idProduct); int config_num = config_desc->bConfigurationValue; + const struct libusb_interface_descriptor *intf_desc_candidate = NULL; + const struct libusb_interface_descriptor *intf_desc_found = NULL; for (int interface = 0; interface < config_desc->bNumInterfaces; interface++) { const struct libusb_interface_descriptor *intf_desc = &config_desc->interface[interface].altsetting[0]; @@ -190,98 +204,165 @@ static int cmsis_dap_usb_open(struct cmsis_dap *dap, uint16_t vids[], uint16_t p * - Endpoint 3: Bulk In (optional) – used for streaming SWO trace (if enabled with SWO_STREAM). */ - if (intf_desc->bNumEndpoints < 2) + /* Search for "CMSIS-DAP" in the interface string */ + bool cmsis_dap_in_interface_str = false; + if (intf_desc->iInterface != 0) { + + char interface_str[256] = {0}; + + err = libusb_get_string_descriptor_ascii( + dev_handle, intf_desc->iInterface, + (uint8_t *)interface_str, sizeof(interface_str)); + if (err < 0) { + LOG_DEBUG("could not read interface string %d for device 0x%04x:0x%04x: %s", + intf_desc->iInterface, + dev_desc.idVendor, dev_desc.idProduct, + libusb_strerror(err)); + } else if (strstr(interface_str, "CMSIS-DAP")) { + cmsis_dap_in_interface_str = true; + LOG_DEBUG("found interface %d string '%s'", + interface_num, interface_str); + } + } + + /* Bypass the following check if this interface was explicitly requested. */ + if (cmsis_dap_usb_interface == -1) { + if (!cmsis_dap_in_product_str && !cmsis_dap_in_interface_str) + continue; + } + + /* check endpoints */ + if (intf_desc->bNumEndpoints < 2) { + LOG_DEBUG("skipping interface %d, has only %d endpoints", + interface_num, intf_desc->bNumEndpoints); continue; + } if ((intf_desc->endpoint[0].bmAttributes & 3) != LIBUSB_TRANSFER_TYPE_BULK || - (intf_desc->endpoint[0].bEndpointAddress & 0x80) != LIBUSB_ENDPOINT_OUT) + (intf_desc->endpoint[0].bEndpointAddress & 0x80) != LIBUSB_ENDPOINT_OUT) { + LOG_DEBUG("skipping interface %d, endpoint[0] is not bulk out", + interface_num); continue; + } if ((intf_desc->endpoint[1].bmAttributes & 3) != LIBUSB_TRANSFER_TYPE_BULK || - (intf_desc->endpoint[1].bEndpointAddress & 0x80) != LIBUSB_ENDPOINT_IN) + (intf_desc->endpoint[1].bEndpointAddress & 0x80) != LIBUSB_ENDPOINT_IN) { + LOG_DEBUG("skipping interface %d, endpoint[1] is not bulk in", + interface_num); continue; + } - /* Bypass the following checks if this interface was explicitly requested. */ - if (cmsis_dap_usb_interface == -1) { - if (intf_desc->bInterfaceClass != LIBUSB_CLASS_VENDOR_SPEC || - intf_desc->bInterfaceSubClass != 0 || intf_desc->bInterfaceProtocol != 0) + /* We can rely on the interface is really CMSIS-DAP if + * - we've seen CMSIS-DAP in the interface string + * - config asked explicitly for an interface number + * - the device has only one interface + * The later two cases should be honored only if we know + * we are on the rigt device */ + bool intf_identified_reliably = cmsis_dap_in_interface_str + || (device_identified_reliably && + (cmsis_dap_usb_interface != -1 + || config_desc->bNumInterfaces == 1)); + + if (intf_desc->bInterfaceClass != LIBUSB_CLASS_VENDOR_SPEC || + intf_desc->bInterfaceSubClass != 0 || intf_desc->bInterfaceProtocol != 0) { + /* If the interface is reliably identified + * then we need not insist on setting USB class, subclass and protocol + * exactly as the specification requires. + * At least KitProg3 uses class 0 contrary to the specification */ + if (intf_identified_reliably) { + LOG_WARNING("Using CMSIS-DAPv2 interface %d with wrong class %" PRId8 + " subclass %" PRId8 " or protocol %" PRId8, + interface_num, + intf_desc->bInterfaceClass, + intf_desc->bInterfaceSubClass, + intf_desc->bInterfaceProtocol); + } else { + LOG_DEBUG("skipping interface %d, class %" PRId8 + " subclass %" PRId8 " protocol %" PRId8, + interface_num, + intf_desc->bInterfaceClass, + intf_desc->bInterfaceSubClass, + intf_desc->bInterfaceProtocol); continue; - /* Search for "CMSIS-DAP" in the interface string */ - if (cmsis_dap_usb_interface != -1 && !cmsis_dap_found) { - if (intf_desc->iInterface == 0) - continue; - - char interface_str[256] = {0}; - - err = libusb_get_string_descriptor_ascii( - dev_handle, intf_desc->iInterface, - (uint8_t *)interface_str, sizeof(interface_str)); - if (err < 0) { - LOG_ERROR("could not read interface string for device 0x%04x:0x%04x: %s", - dev_desc.idVendor, dev_desc.idProduct, libusb_strerror(err)); - continue; - } else if (!strstr(interface_str, "CMSIS-DAP")) { - continue; - } else { - LOG_DEBUG("CMSIS-DAP found in interface string"); - } } } - int packet_size = intf_desc->endpoint[0].wMaxPacketSize; - int ep_out = intf_desc->endpoint[0].bEndpointAddress; - int ep_in = intf_desc->endpoint[1].bEndpointAddress; + if (intf_identified_reliably) { + /* That's the one! */ + intf_desc_found = intf_desc; + break; + } + + if (!intf_desc_candidate && device_identified_reliably) { + /* This interface looks suitable for CMSIS-DAP. Store the pointer to it + * and keep searching for another one with CMSIS-DAP in interface string */ + intf_desc_candidate = intf_desc; + } + } + + if (!intf_desc_found) { + /* We were not able to identify reliably which interface is CMSIS-DAP. + * Let's use the first suitable if we found one */ + intf_desc_found = intf_desc_candidate; + } - /* That's the one! */ + if (!intf_desc_found) { libusb_free_config_descriptor(config_desc); - libusb_free_device_list(device_list, true); + continue; + } - LOG_INFO("Using CMSIS-DAPv2 interface with VID:PID=0x%04x:0x%04x, serial=%s", - dev_desc.idVendor, dev_desc.idProduct, dev_serial); + /* We've chosen an interface, connect to it */ + int interface_num = intf_desc_found->bInterfaceNumber; + int packet_size = intf_desc_found->endpoint[0].wMaxPacketSize; + int ep_out = intf_desc_found->endpoint[0].bEndpointAddress; + int ep_in = intf_desc_found->endpoint[1].bEndpointAddress; - int current_config; - err = libusb_get_configuration(dev_handle, ¤t_config); - if (err) { - LOG_ERROR("could not find current configuration: %s", libusb_strerror(err)); - libusb_close(dev_handle); - libusb_exit(ctx); - return ERROR_FAIL; - } + libusb_free_config_descriptor(config_desc); + libusb_free_device_list(device_list, true); - if (config_num != current_config) { - err = libusb_set_configuration(dev_handle, config_num); - if (err) { - LOG_ERROR("could not set configuration: %s", libusb_strerror(err)); - libusb_close(dev_handle); - libusb_exit(ctx); - return ERROR_FAIL; - } - } + LOG_INFO("Using CMSIS-DAPv2 interface with VID:PID=0x%04x:0x%04x, serial=%s", + dev_desc.idVendor, dev_desc.idProduct, dev_serial); - err = libusb_claim_interface(dev_handle, interface_num); - if (err) - LOG_WARNING("could not claim interface: %s", libusb_strerror(err)); + int current_config; + err = libusb_get_configuration(dev_handle, ¤t_config); + if (err) { + LOG_ERROR("could not find current configuration: %s", libusb_strerror(err)); + libusb_close(dev_handle); + libusb_exit(ctx); + return ERROR_FAIL; + } - dap->bdata = malloc(sizeof(struct cmsis_dap_backend_data)); - if (dap->bdata == NULL) { - LOG_ERROR("unable to allocate memory"); - libusb_release_interface(dev_handle, interface_num); + if (config_num != current_config) { + err = libusb_set_configuration(dev_handle, config_num); + if (err) { + LOG_ERROR("could not set configuration: %s", libusb_strerror(err)); libusb_close(dev_handle); libusb_exit(ctx); return ERROR_FAIL; } + } - dap->packet_size = packet_size + 1; /* "+ 1" for compatibility with the HID backend */ - dap->bdata->usb_ctx = ctx; - dap->bdata->dev_handle = dev_handle; - dap->bdata->ep_out = ep_out; - dap->bdata->ep_in = ep_in; - dap->bdata->interface = interface_num; - return ERROR_OK; + err = libusb_claim_interface(dev_handle, interface_num); + if (err) + LOG_WARNING("could not claim interface: %s", libusb_strerror(err)); + + dap->bdata = malloc(sizeof(struct cmsis_dap_backend_data)); + if (dap->bdata == NULL) { + LOG_ERROR("unable to allocate memory"); + libusb_release_interface(dev_handle, interface_num); + libusb_close(dev_handle); + libusb_exit(ctx); + return ERROR_FAIL; } - libusb_free_config_descriptor(config_desc); + dap->packet_size = packet_size + 1; /* "+ 1" for compatibility with the HID backend */ + dap->bdata->usb_ctx = ctx; + dap->bdata->dev_handle = dev_handle; + dap->bdata->ep_out = ep_out; + dap->bdata->ep_in = ep_in; + dap->bdata->interface = interface_num; + return ERROR_OK; } libusb_close(dev_handle); |