- disabled FT2232 debug output (that code should be fairly stable)

- fixed bug in jtag.c where JTAG command type was wrong for PATHMOVE commands
- added lattice ISP cable (experimental)
- properly initialize parallel port (clear tristate bit)
- fixed jtag/Makefile.am that failed with some versions of autotools
- print error number if read() in gdbserver.c failed on Windows
- fixed handling of opcodes with bits 27-25 b011 (comment was correct, code had a bug)
- added support for AT91SAM7SE internal flash


git-svn-id: svn://svn.berlios.de/openocd/trunk@122 b42882b7-edfa-0310-969c-e2dbd0fdcd60

7 files changed, 57 insertions, 14 deletions

diff --git a/src/flash/at91sam7.c b/src/flash/at91sam7.c
index 8491682..dc9c2d7 100644
--- a/src/flash/at91sam7.c
+++ b/src/flash/at91sam7.c
@@ -405,6 +405,40 @@ int at91sam7_read_part_info(struct flash_bank_s *bank)
 		return ERROR_OK;
 	}
 	
+	if (at91sam7_info->cidr_arch == 0x72 )
+	{
+		at91sam7_info->num_nvmbits = 2;
+		at91sam7_info->nvmbits = (status>>8)&0x03;
+		bank->base = 0x100000;
+		bank->bus_width = 4;
+		if (bank->size==0x80000) /* AT91SAM7SE512 */
+		{
+			at91sam7_info->target_name = "AT91SAM7SE512";
+			at91sam7_info->num_lockbits = 32;
+			at91sam7_info->pagesize = 256;
+			at91sam7_info->pages_in_lockregion = 64;
+			at91sam7_info->num_pages = 32*64;
+		}
+		if (bank->size==0x40000)
+		{
+			at91sam7_info->target_name = "AT91SAM7SE256";
+			at91sam7_info->num_lockbits = 16;
+			at91sam7_info->pagesize = 256;
+			at91sam7_info->pages_in_lockregion = 64;
+			at91sam7_info->num_pages = 16*64;
+		}
+		if (bank->size==0x08000)
+		{
+			at91sam7_info->target_name = "AT91SAM7SE32";
+			at91sam7_info->num_lockbits = 8;
+			at91sam7_info->pagesize = 128;
+			at91sam7_info->pages_in_lockregion = 32;
+			at91sam7_info->num_pages = 8*32;
+		}
+		
+		return ERROR_OK;
+	}
+	
 	if (at91sam7_info->cidr_arch == 0x75 )
 	{
 		at91sam7_info->num_nvmbits = 3;
diff --git a/src/jtag/Makefile.am b/src/jtag/Makefile.am
index d4812a4..78230b6 100644
--- a/src/jtag/Makefile.am
+++ b/src/jtag/Makefile.am
@@ -28,14 +28,12 @@ endif
 if FT2232_LIBFTDI
 FT2232FILES = ft2232.c
 else
-FT2232FILES =
-endif
-
 if FT2232_FTD2XX
 FT2232FILES = ft2232.c
 else
 FT2232FILES =
 endif
+endif
 
 if AMTJTAGACCEL
 AMTJTAGACCELFILES = amt_jtagaccel.c
diff --git a/src/jtag/ft2232.c b/src/jtag/ft2232.c
index 096111b..386da24 100644
--- a/src/jtag/ft2232.c
+++ b/src/jtag/ft2232.c
@@ -52,13 +52,13 @@
 
 /* enable this to debug io latency
  */
-#if 1
+#if 0
 #define _DEBUG_USB_IO_
 #endif
 
 /* enable this to debug communication
  */
-#if 1
+#if 0
 #define _DEBUG_USB_COMMS_
 #endif
 
diff --git a/src/jtag/jtag.c b/src/jtag/jtag.c
index 259a327..263eed1 100644
--- a/src/jtag/jtag.c
+++ b/src/jtag/jtag.c
@@ -714,7 +714,7 @@ int jtag_add_pathmove(int num_states, enum tap_state *path)
 		*last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
 		last_comand_pointer = &((*last_cmd)->next);
 		(*last_cmd)->next = NULL;
-		(*last_cmd)->type = JTAG_RUNTEST;
+		(*last_cmd)->type = JTAG_PATHMOVE;
 	
 		(*last_cmd)->cmd.pathmove = cmd_queue_alloc(sizeof(pathmove_command_t));
 		(*last_cmd)->cmd.pathmove->num_states = num_states;
diff --git a/src/jtag/parport.c b/src/jtag/parport.c
index c87f98e..8278bda 100644
--- a/src/jtag/parport.c
+++ b/src/jtag/parport.c
@@ -98,6 +98,7 @@ cable_t cables[] =
 	{ "chameleon",			0x80, 0x00, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00 },
 	{ "dlc5",				0x10, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x10 },
 	{ "triton",				0x80, 0x08, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00 },
+	{ "lattice",			0x40, 0x10, 0x04, 0x02, 0x01, 0x08, 0x00, 0x00, 0x18 },
 	{ NULL,					0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
 };
 
@@ -311,7 +312,7 @@ int parport_init(void)
 	dataport_value = cable->PORT_INIT;
 	
 #if PARPORT_USE_PPDEV == 1
-	if (device_handle>0)
+	if (device_handle > 0)
 	{
 		ERROR("device is already opened");
 		return ERROR_JTAG_INIT_FAILED;
@@ -322,13 +323,14 @@ int parport_init(void)
 
 	snprintf(buffer, 256, "/dev/ppi%d", parport_port);
 	device_handle = open(buffer, O_WRONLY);
-#else
+#else /* not __Free_BSD */
 	DEBUG("opening /dev/parport%d...", parport_port);
 
 	snprintf(buffer, 256, "/dev/parport%d", parport_port);
 	device_handle = open(buffer, O_WRONLY);
-#endif	
-	if (device_handle<0)
+#endif /* __FreeBSD__ */
+
+	if (device_handle < 0)
 	{
 		ERROR("cannot open device. check it exists and that user read and write rights are set");
 		return ERROR_JTAG_INIT_FAILED;
@@ -359,8 +361,9 @@ int parport_init(void)
 		ERROR("cannot set compatible 1284 mode to device");
 		return ERROR_JTAG_INIT_FAILED;
 	}
-#endif
-#else
+#endif /* not __Free_BSD__ */
+
+#else /* not PARPORT_USE_PPDEV */
 	if (parport_port == 0)
 	{
 		parport_port = 0x378;
@@ -381,6 +384,14 @@ int parport_init(void)
 		return ERROR_JTAG_INIT_FAILED;
 	}
 	DEBUG("...privileges granted");
+	
+	/* make sure parallel port is in right mode (clear tristate and interrupt */
+	#ifdef __FreeBSD__
+		outb(parport_port + 2, 0x0);
+	#else
+		outb(0x0, dataport);
+	#endif
+	
 #endif /* PARPORT_USE_PPDEV */
 	
 	parport_reset(0, 0);
diff --git a/src/server/gdb_server.c b/src/server/gdb_server.c
index 97f5fbf..10e3676 100644
--- a/src/server/gdb_server.c
+++ b/src/server/gdb_server.c
@@ -98,7 +98,7 @@ int gdb_get_char(connection_t *connection, int* next_char)
 			case WSAECONNABORTED:
 				return ERROR_SERVER_REMOTE_CLOSED;
 			default:
-				ERROR("read: %d", strerror(errno));
+				ERROR("read: %d", errno);
 				exit(-1);
 		}
 #else
diff --git a/src/target/arm_disassembler.c b/src/target/arm_disassembler.c
index 0902410..8a048cf 100644
--- a/src/target/arm_disassembler.c
+++ b/src/target/arm_disassembler.c
@@ -1247,7 +1247,7 @@ int evaluate_opcode(u32 opcode, u32 address, arm_instruction_t *instruction)
 	}
 	
 	/* catch opcodes with [27:25] = b011 */
-	if ((opcode & 0x0e000000) == 0x04000000)
+	if ((opcode & 0x0e000000) == 0x06000000)
 	{
 		/* Undefined instruction */
 		if ((opcode & 0x00000010) == 0x00000010)