Age | Commit message (Collapse) | Author | Files | Lines |
|
For quite some time we've been using combinations of bits for
specifying various registers in operands and templates. I think it was
Alan who had indicated that likely the debug printing would need
adjustment as a result. Here we go.
Accumulator handling for GPRs gets changed to match that for FPU regs.
For this to work, OPERAND_TYPE_ACC{32,64} get repurposed, with their
original uses replaced by direct checks of the two bits of interest,
which is cheaper than operand_type_equal() invocations.
For SIMD registers nothing similar appears to be needed, as respective
operands get stripped from the (copy of the) template before pt() is
reached.
The type change on pi() is to silence a compiler diagnostic. Arguably
its other parameter could also be const-qualified.
|
|
I assume this mode was needed when EVEX.W handling wasn't really correct
yet for other than 64-bit mode. It's clearly not needed anymore. Its
elimination also allows dropping the EVEX.W split of VCVT{,U}SI2SS. (For
the record, the dropped mode would have been wrong if used in any table
entry not already guaranteeing EVEX.W=1.)
|
|
The only meaningful difference from OP_I() is the handling of the
VEX.W=1 case in 64-bit mode for bytemode being v_mode. Funnel
everything else into OP_I(), and drop no longer needed local
variables.
|
|
MOVNTI was wrongly assembled with a 66h prefix. Add IgnoreSize to
address this. It and the scalar to/from integer conversion insns also
were also wrongly using Ev / Gv, leading to 16-bit register names being
printed when 32-bit ones were meant.
Clone the 32-bit SSE2 test to cover both assembler and disassembler.
|
|
The same reasoning applies here as did/does for immediates fitting in
31 bits.
|
|
Break i386-dis-evex.h into small files such that each file is included
just once.
* i386-dis-evex.h: Break into ...
* i386-dis-evex-len.h: New file.
* i386-dis-evex-mod.h: Likewise.
* i386-dis-evex-prefix.h: Likewise.
* i386-dis-evex-reg.h: Likewise.
* i386-dis-evex-w.h: Likewise.
* i386-dis.c: Include i386-dis-evex-reg.h, i386-dis-evex-prefix.h,
i386-dis-evex.h, i386-dis-evex-len.h, i386-dis-evex-w.h and
i386-dis-evex-mod.h.
|
|
Since not all vector lengths are supported by EVEX broadcast instructions,
decode them only with supported vector lengths.
gas/
PR binutils/24700
* testsuite/gas/i386/disassem.s: Add test for vbroadcasti32x8
with invalid vector length.
* testsuite/gas/i386/x86-64-disassem.s: Likewise.
* testsuite/gas/i386/disassem.d: Updated.
* testsuite/gas/i386/x86-64-disassem.d: Likewise.
opcodes/
PR binutils/24700
* i386-dis-evex.h (evex_table): Update EVEX_W_0F3819_P_2,
EVEX_W_0F381A_P_2, EVEX_W_0F381B_P_2, EVEX_W_0F385A_P_2 and
EVEX_W_0F385B_P_2.
(evex_len_table): Add EVEX_LEN_0F3819_P_2_W_0,
EVEX_LEN_0F3819_P_2_W_1, EVEX_LEN_0F381A_P_2_W_0,
EVEX_LEN_0F381A_P_2_W_1, EVEX_LEN_0F381B_P_2_W_0,
EVEX_LEN_0F381B_P_2_W_1, EVEX_LEN_0F385A_P_2_W_0,
EVEX_LEN_0F385A_P_2_W_1, EVEX_LEN_0F385B_P_2_W_0 and
EVEX_LEN_0F385B_P_2_W_1.
* i386-dis.c (EVEX_LEN_0F3819_P_2_W_0): New enum.
(EVEX_LEN_0F3819_P_2_W_1): Likewise.
(EVEX_LEN_0F381A_P_2_W_0): Likewise.
(EVEX_LEN_0F381A_P_2_W_1): Likewise.
(EVEX_LEN_0F381B_P_2_W_0): Likewise.
(EVEX_LEN_0F381B_P_2_W_1): Likewise.
(EVEX_LEN_0F385A_P_2_W_0): Likewise.
(EVEX_LEN_0F385A_P_2_W_1): Likewise.
(EVEX_LEN_0F385B_P_2_W_0): Likewise.
(EVEX_LEN_0F385B_P_2_W_1): Likewise.
|
|
Since not all vector lengths are supported by vshufXXX, vinsertXXX and
vextractXXX, decode them only with supported vector lengths.
gas/
PR binutils/24691
* testsuite/gas/i386/disassem.s: Add test for vshuff32x4 with
invalid vector length.
* testsuite/gas/i386/x86-64-disassem.s: Likewise.
* testsuite/gas/i386/disassem.d: Updated.
* testsuite/gas/i386/x86-64-disassem.d: Likewise.
opcodes/
PR binutils/24691
* i386-dis-evex.h (evex_table): Update EVEX_W_0F3A23_P_2,
EVEX_W_0F3A38_P_2, EVEX_W_0F3A39_P_2, EVEX_W_0F3A3A_P_2,
EVEX_W_0F3A3B_P_2 and EVEX_W_0F3A43_P_2.
(evex_len_table): Add EVEX_LEN_0F3A23_P_2_W_0,
EVEX_LEN_0F3A23_P_2_W_1, EVEX_LEN_0F3A38_P_2_W_0,
EVEX_LEN_0F3A38_P_2_W_1, EVEX_LEN_0F3A39_P_2_W_0,
EVEX_LEN_0F3A39_P_2_W_1, EVEX_LEN_0F3A3A_P_2_W_0,
EVEX_LEN_0F3A3A_P_2_W_1, EVEX_LEN_0F3A3B_P_2_W_0,
EVEX_LEN_0F3A3B_P_2_W_1, EVEX_LEN_0F3A43_P_2_W_0 and
EVEX_LEN_0F3A43_P_2_W_1.
* i386-dis.c (EVEX_LEN_0F3A23_P_2_W_0): New enum.
(EVEX_LEN_0F3A23_P_2_W_1): Likewise.
(EVEX_LEN_0F3A38_P_2_W_0): Likewise.
(EVEX_LEN_0F3A38_P_2_W_1): Likewise.
(EVEX_LEN_0F3A39_P_2_W_0): Likewise.
(EVEX_LEN_0F3A39_P_2_W_1): Likewise.
(EVEX_LEN_0F3A3A_P_2_W_0): Likewise.
(EVEX_LEN_0F3A3A_P_2_W_1): Likewise.
(EVEX_LEN_0F3A3B_P_2_W_0): Likewise.
(EVEX_LEN_0F3A3B_P_2_W_1): Likewise.
(EVEX_LEN_0F3A43_P_2_W_0): Likewise.
(EVEX_LEN_0F3A43_P_2_W_1): Likewise.
|
|
* po/fr.po; Updated French translation.
|
|
This picks up changes for:
- new orfpx64a32 spec additions
- new unordered instructions
- symbol and documentation updates
opcodes/ChangeLog:
* or1k-asm.c: Regenerated.
* or1k-desc.c: Regenerated.
* or1k-desc.h: Regenerated.
* or1k-dis.c: Regenerated.
* or1k-ibld.c: Regenerated.
* or1k-opc.c: Regenerated.
* or1k-opc.h: Regenerated.
* or1k-opinst.c: Regenerated.
|
|
|
|
opcodes/
* ppc-opc.c (powerpc_opcodes) <ldmx>: Delete mnemonic.
gas/
* testsuite/gas/ppc/power9.d: Delete ldmx tests.
* testsuite/gas/ppc/power9.s: Likewise.
|
|
Since not all vector lengths are supported by EVEX vextractfXX and
vinsertfXX, decode them only with supported vector lengths.
gas/
PR binutils/24633
* testsuite/gas/i386/disassem.s: Add tests for invalid vector
lengths for EVEX vextractfXX and vinsertfXX.
* testsuite/gas/i386/x86-64-disassem.s: Likewise.
* testsuite/gas/i386/disassem.d: Updated.
* testsuite/gas/i386/x86-64-disassem.d: Likewise.
opcodes/
PR binutils/24633
* i386-dis-evex.h (evex_table): Update EVEX_W_0F3A18_P_2,
EVEX_W_0F3A19_P_2, EVEX_W_0F3A1A_P_2 and EVEX_W_0F3A1B_P_2.
(evex_len_table): EVEX_LEN_0F3A18_P_2_W_0,
EVEX_LEN_0F3A18_P_2_W_1, EVEX_LEN_0F3A19_P_2_W_0,
EVEX_LEN_0F3A19_P_2_W_1, EVEX_LEN_0F3A1A_P_2_W_0,
EVEX_LEN_0F3A1A_P_2_W_1, EVEX_LEN_0F3A1B_P_2_W_0,
EVEX_LEN_0F3A1B_P_2_W_1.
* i386-dis.c (EVEX_LEN_0F3A18_P_2_W_0): New enum.
(EVEX_LEN_0F3A18_P_2_W_1): Likewise.
(EVEX_LEN_0F3A19_P_2_W_0): Likewise.
(EVEX_LEN_0F3A19_P_2_W_1): Likewise.
(EVEX_LEN_0F3A1A_P_2_W_0): Likewise.
(EVEX_LEN_0F3A1A_P_2_W_1): Likewise.
(EVEX_LEN_0F3A1B_P_2_W_0): Likewise.
(EVEX_LEN_0F3A1B_P_2_W_1): Likewise.
|
|
If VEX.vvvv and EVEX.vvvv are reserved, they must be all 1s, which are
all 0s in inverted form. Add check for unused VEX.vvvv and EVEX.vvvv
when disassembling VEX and EVEX instructions.
gas/
PR binutils/24626
* testsuite/gas/i386/disassem.s: Add tests for reserved VEX.vvvv
and EVEX.vvvv.
* testsuite/gas/i386/x86-64-disassem.s: Likewise.
* testsuite/gas/i386/disassem.d: Updated.
* testsuite/gas/i386/x86-64-disassem.d: Likewise.
opcodes/
PR binutils/24626
* i386-dis.c (print_insn): Check for unused VEX.vvvv and
EVEX.vvvv when disassembling VEX and EVEX instructions.
(OP_VEX): Set vex.register_specifier to 0 after readding
vex.register_specifier.
(OP_Vex_2src_1): Likewise.
(OP_Vex_2src_2): Likewise.
(OP_LWP_E): Likewise.
(OP_EX_Vex): Don't check vex.register_specifier.
(OP_XMM_Vex): Likewise.
|
|
This patch enables support for VP2INTERSECT in binutils. Please refer to
https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
for VP2INTERSECT details.
Make check-gas is ok.
gas/
2019-06-04 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
Lili Cui <lili.cui@intel.com>
* config/tc-i386.c (cpu_arch): Add .avx512_vp2intersect.
(cpu_noarch): Likewise.
* doc/c-i386.texi: Document avx512_vp2intersect.
* testsuite/gas/i386/i386.exp: Run vp2intersect tests.
* testsuite/gas/i386/vp2intersect-intel.d: New test.
* testsuite/gas/i386/vp2intersect.d: Likewise.
* testsuite/gas/i386/vp2intersect.s: Likewise.
* testsuite/gas/i386/vp2intersect-inval-bcast.l: Likewise.
* testsuite/gas/i386/vp2intersect-inval-bcast.s: Likewise.
* testsuite/gas/i386/x86-64-vp2intersect-intel.d: Likewise.
* testsuite/gas/i386/x86-64-vp2intersect.d: Likewise.
* testsuite/gas/i386/x86-64-vp2intersect.s: Likewise.
* testsuite/gas/i386/x86-64-vp2intersect-inval-bcast.l: Likewise.
* testsuite/gas/i386/x86-64-vp2intersect-inval-bcast.s: Likewise.
opcodes/
2019-06-04 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
Lili Cui <lili.cui@intel.com>
* i386-dis.c (enum): Add PREFIX_EVEX_0F3868, EVEX_W_0F3868_P_3.
* i386-dis-evex.h (evex_table): Add AVX512_VP2INTERSECT
instructions.
* i386-gen.c (cpu_flag_init): Add CPU_AVX512_VP2INTERSECT_FLAGS,
CPU_ANY_AVX512_VP2INTERSECT_FLAGS.
(cpu_flags): Add CpuAVX512_VP2INTERSECT.
* i386-opc.h (enum): Add CpuAVX512_VP2INTERSECT.
(i386_cpu_flags): Add cpuavx512_vp2intersect.
* i386-opc.tbl: Add AVX512_VP2INTERSECT insns.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
|
|
This patch enables support for ENQCMD[S] in binutils. Please refer to
https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
for ENQCMD[S] details.
Make check-gas is ok.
gas/ChangeLog:
2019-06-04 Xuepeng Guo <xuepeng.guo@intel.com>
Lili Cui <lili.cui@intel.com>
* doc/c-i386.texi: Document enqcmd.
* testsuite/gas/i386/enqcmd-intel.d: New file.
* testsuite/gas/i386/enqcmd-inval.l: Likewise.
* testsuite/gas/i386/enqcmd-inval.s: Likewise.
* testsuite/gas/i386/enqcmd.d: Likewise.
* testsuite/gas/i386/enqcmd.s: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-inval.l: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-inval.s: Likewise.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-enqcmd.s: Likewise.
* testsuite/gas/i386/i386.exp: Run enqcmd-intel, enqcmd-inval,
enqcmd, x86-64-enqcmd-intel, x86-64-enqcmd-inval,
and x86-64-enqcmd.
opcodes/ChangeLog:
2019-06-04 Xuepeng Guo <xuepeng.guo@intel.com>
Lili Cui <lili.cui@intel.com>
* i386-dis.c (enum): Add MOD_0F38F8_PREFIX_1 and
MOD_0F38F8_PREFIX_3.
(prefix_table): New instructions (see prefix above).
(mod_table): New instructions (see prefix above).
* i386-gen.c (cpu_flag_init): Add entries for enqcmd.
(cpu_flags): Add a bitfield for enqmcd.
* i386-init.h: Regenerated.
* i386-opc.h (enum): Add CpuENQCMD.
(i386_cpu_flags): Add a bitfield for cpuenqcmd.
* i386-opc.tbl: Add enqcmd and enqcmds instructions.
* i386-init.h: Regenerated.
* i386-tbl.h: Regenerated.
|
|
* arm-dis.c (is_mve_unpredictable): Remove spurious paranthesis.
|
|
* ppc-dis.c (prefix_opcd_indices): Correct size.
|
|
For AVX512 instructions with Disp8ShiftVL and Broadcast, we may need to
add CheckRegSize to check if broadcast matches the destination register
size.
gas/
PR gas/24625
* testsuite/gas/i386/inval-avx512f.s: Add tests for AVX512_BF16
instructions with invalid broadcast.
* testsuite/gas/i386/x86-64-inval-avx512f.s: Likewise.
* testsuite/gas/i386/inval-avx512f.l: Updated.
* testsuite/gas/i386/x86-64-inval-avx512f.l: Likewise.
opcodes/
PR gas/24625
* i386-opc.tbl: Add CheckRegSize to AVX512_BF16 instructions with
Disp8ShiftVL.
* i386-tbl.h: Regenerated.
|
|
bfd/
* po/SRC-POTFILES.in: Regenerate.
gas/
* po/POTFILES.in: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
opcodes/
* po/POTFILES.in: Regenerate.
|
|
opcodes/
* ppc-opc.c (insert_d34, extract_d34, insert_nsi34, extract_nsi34),
(insert_pcrel, extract_pcrel, extract_pcrel0): New functions.
(extract_esync, extract_raq, extract_tbr, extract_sxl): Comment.
(powerpc_operands <D34, SI34, NSI34, PRA0, PRAQ, PCREL, PCREL0,
XTOP>): Define and add entries.
(P8LS, PMLS, P_D_MASK, P_DRAPCREL_MASK): Define.
(prefix_opcodes): Add pli, paddi, pla, psubi, plwz, plbz, pstw,
pstb, plhz, plha, psth, plfs, plfd, pstfs, pstfd, plq, plxsd,
plxssp, pld, plwa, pstxsd, pstxssp, pstxv, pstd, and pstq.
gas/
* config/tc-ppc.c (ppc_insert_operand): Only sign extend fields that
are 32-bits or smaller.
* messages.c (as_internal_value_out_of_range): Do not truncate
variables and use BFD_VMA_FMT to print them.
* testsuite/gas/ppc/prefix-pcrel.s,
* testsuite/gas/ppc/prefix-pcrel.d: New test.
* testsuite/gas/ppc/ppc.exp: Run it.
|
|
This patch adds initial 64-bit insn assembler/disassembler support.
The only instruction added is "pnop" along with the automatic aligning
of prefix instruction so they do not cross 64-byte boundaries.
include/
* dis-asm.h (WIDE_OUTPUT): Define.
* opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare.
(PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX),
(PPC_PREFIX_P, PPC_PREFIX_SEG): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "future" entry.
(PREFIX_OPCD_SEGS): Define.
(prefix_opcd_indices): New array.
(disassemble_init_powerpc): Initialize prefix_opcd_indices.
(lookup_prefix): New function.
(print_insn_powerpc): Handle 64-bit prefix instructions.
* ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK),
(PMRR, POWERXX): Define.
(prefix_opcodes): New instruction table.
(prefix_num_opcodes): New constant.
binutils/
* objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes.
(struct insn_label_list): New.
(insn_labels, free_insn_labels): New variables.
(ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs.
(ppc_frob_label, ppc_new_dot_label): Move functions earlier in file
and call ppc_record_label.
(md_assemble): Handle 64-bit prefix instructions. Align labels
that are on the same line as a prefix instruction.
* config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to
later in the file.
(md_start_line_hook): Define.
(ppc_start_line_hook): Declare.
* testsuite/gas/ppc/prefix-align.d,
* testsuite/gas/ppc/prefix-align.s: New test.
* testsuite/gas/ppc/ppc.exp: Run new test.
|
|
This patch adds support for the Linux kernel eBPF architecture to the
opcodes. The port is based on CGEN.
opcodes/ChangeLog:
2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure.ac (SHARED_DEPENDENCIES): Add case for bfd_bpf_arch.
* configure: Regenerated.
* Makefile.am: Add rules for the files generated from cpu/bpf.cpu
and cpu/bpf.opc.
(HFILES): Add bpf-desc.h and bpf-opc.h.
(TARGET_LIBOPCODES_CFILES): Add bpf-asm.c, bpf-desc.c, bpf-dis.c,
bpf-ibld.c and bpf-opc.c.
(BPF_DEPS): Define.
* Makefile.in: Regenerated.
* disassemble.c (ARCH_bpf): Define.
(disassembler): Add case for bfd_arch_bpf.
(disassemble_init_for_target): Likewise.
(enum epbf_isa_attr): Define.
* disassemble.h: extern print_insn_bpf.
* bpf-asm.c: Generated.
* bpf-opc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-ibld.c: Likewise.
* bpf-dis.c: Likewise.
* bpf-desc.h: Likewise.
* bpf-desc.c: Likewise.
|
|
This patch makes changes to the <spec_reg> operand for VMRS and VMSR
instructions as per the Armv8.1-M Mainline.
New <spec_reg> options to support are:
0b0010: FPSCR_nzcvqc, access to FPSCR condition and saturation flags.
0b1100: VPR, privileged only access to the VPR register.
0b1101: P0, access to VPR.P0 predicate fields
0b1110: FPCXT_NS, enables saving and restoring of Non-secure floating
point context.
0b1111: FPCXT_S, enables saving and restoring of Secure floating point
context
*** gas/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (parse_operands): Update case OP_RVC to
parse p0 and P0.
(do_vmrs): Add checks for valid operands with respect to
cpu and fpu options.
(do_vmsr): Likewise.
(reg_names): New reg_names for FPSCR_nzcvqc, VPR, FPCXT_NS
and FPCXT_S.
* testsuite/gas/arm/armv8_1-m-spec-reg.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg.s: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.l: New.
* testsuite/gas/arm/vfp1xD.d: Updated to allow new valid values.
* testsuite/gas/arm/vfp1xD_t2.d: Likewise.
*** opcodes/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (coprocessor_opcodes): New instructions for VMRS
and VMSR with the new operands.
|
|
This patch adds the following instructions which are part of the
Armv8.1-M Mainline:
CINC
CINV
CNEG
CSINC
CSINV
CSNEG
CSET
CSETM
CSEL
gas/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (TOGGLE_BIT): New.
(T16_32_TAB): New entries for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm and csel.
(operand_parse_code): New OP_RR_ZR.
(parse_operand): Handle case for OP_RR_ZR.
(do_t_cond): New.
(insns): New instructions for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm, csel.
* testsuite/gas/arm/armv8_1-m-cond-bad.d: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.l: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.s: New test.
* testsuite/gas/arm/armv8_1-m-cond.d: New test.
* testsuite/gas/arm/armv8_1-m-cond.s: New test.
opcodes/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (enum mve_instructions): New enum
for csinc, csinv, csneg, csel, cset, csetm, cinv, cinv
and cneg.
(mve_opcodes): New instructions as above.
(is_mve_encoding_conflict): Add cases for csinc, csinv,
csneg and csel.
(print_insn_mve): Accept new %<bitfield>c and %<bitfield>C.
|
|
This patch adds the following instructions which are part of
Armv8.1-M MVE:
ASRL (imm)
ASRL (reg)
LSLL (imm)
LSLL (reg)
LSRL
SQRSHRL
SRQSHR
SQSHLL
SQSHL
SRSHRL
SRSHR
UQRSHLL
UQRSHL
UQSHLL
UQSHL
URSHLL
URSHL
*** gas/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (operand_parse_code): New entries for
OP_RRnpcsp_I32 (register or integer operands).
(do_mve_scalar_shift): New.
(insns): New instructions for asrl, lsll, lsrl, sqrshrl, sqrshr, sqshl
sqshll, srshr, srshrl, uqrshll, uqrshl, uqshll, uqshl, urshrl and urshr.
* testsuite/gas/arm/mve-shift.d: New.
* testsuite/gas/arm/mve-shift.s: New.
* testsuite/gas/arm/mve-shift-bad.d: New.
* testsuite/gas/arm/mve-shift-bad.s: New.
* testsuite/gas/arm/mve-shift-bad.l: New.
*** opcodes/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (emun mve_instructions): Updated for new instructions.
(mve_opcodes): New instructions for asrl, lsll, lsrl, sqrshrl,
sqrshr, sqshl, sqshll, srshr, srshrl, uqrshll, uqrshl, uqshll,
uqshl, urshrl and urshr.
(is_mve_okay_in_it): Add new instructions to TRUE list.
(is_mve_unpredictable): Add cases for UNPRED_R13 and UNPRED_R15.
(print_insn_mve): Updated to accept new %j,
%<bitfield>m and %<bitfield>n patterns.
|
|
The MIPS64R6 TRM requires that the source register for DAUI
not be r0.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 67-68.
gas/
* testsuite/gas/mips/r6-branch-constraints.s: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.s: this and add test
case for DAUI.
* testsuite/gas/mips/r6-branch-constraints.l: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.l: this and add test
for DAUI.
* testsuite/gas/mips/mips.exp: Rename test from
r6-branch-constraints to r6-reg-constraints.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Change source register
constraint for DAUI.
|
|
bfd * po/fr.po: Updated French translation.
binutils* po/ca.po: Updated Catalan translation.
gprof * po/de.po: Updated German translation.
opcodes * po/fr.po: Updated French translation.
|
|
vqabs, vqadd, vqsub, vqneg and vrev
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(enum mve_instructions): Likewise.
(enum mve_undefined): Add new reasons.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_size): Likewise.
|
|
vrmulh and vneg
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(enum mve_instructions): Likewise.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
|
|
vmax(a)v, vmaxnm(a), vmaxnm(a)v, vmin(a), vmin(a)v, vminnm(a), vminnm(a)v and vmla
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(enum mve_instructions): Likewise.
(is_mve_encoding_conflict): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
|
|
vcls, vclz and vctp
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(enum mve_instructions): Likewise.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
|
|
vabd, vabs, vadd, vsbc and vsub
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(enum mve_instructions): Likewise.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
|
|
wlstp and dlstp
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(print_insn_thumb32): Handle new instructions.
|
|
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_undefined): Add new reasons.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_size): Likewise.
(print_mve_shift_n): Likewise.
(print_insn_mve): Likewise.
|
|
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_rotate): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
|
|
vidup and viwdup
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
|
|
vmlaldav, vmladav, vmlas, vrmlsldavh, vmlsldav, vmlsdav, vrmlaldavh, vqdmlah, vqrdmlash, vqrdmlash, vqdmlsdh, vqrdmlsdh, vqdmulh and vqrdmulh
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_undefined): Add new reasons.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
|
|
vqdmull, vqmovn, vqmovun and vmovn
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
|
|
vorr, vorn, vmovx and vbic
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(enum mve_undefined): Likewise.
(is_mve_okay_in_it): Handle new isntructions.
(is_mve_encoding_conflict): Likewise.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_vmov_index): Likewise.
(print_simd_imm8): Likewise.
(print_mve_undefined): Likewise.
(print_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
|
|
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(enum mve_undefined): Likewise.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_unpredictable): Likewise.
(print_mve_rounding_mode): Likewise.
(print_mve_vcvt_size): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
|
|
and gather loads
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(enum mve_undefined): Likewise.
(is_mve_undefined): Handle new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_unpredictable): Likewise.
(print_mve_size): Likewise.
(print_insn_mve): Likewise.
|
|
vstr[bhw]
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_undefined): Add new reasons.
(insns): Add new instructions.
(is_mve_encoding_conflict):
(print_mve_vld_str_addr): New print function.
(is_mve_undefined): Handle new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_size): Likewise.
(print_insn_coprocessor_1): Handle MVE VLDR, VSTR instructions.
(print_insn_mve): Handle new operands.
|
|
vst[24]
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_unpredictable): Likewise.
(mve_opcodes): Add new instructions.
(print_mve_unpredictable): Handle new reasons.
(print_mve_register_blocks): New print function.
(print_mve_size): Handle new instructions.
(print_insn_mve): Likewise.
|
|
vfma, vfms, vhadd, vhsub and vrhadd
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(enum mve_undefined): Likewise.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(coprocessor_opcodes): Move NEON VDUP from here...
(neon_opcodes): ... to here.
(mve_opcodes): Add new instructions.
(print_mve_undefined): Handle new reasons.
(print_mve_unpredictable): Likewise.
(print_mve_size): Handle new instructions.
(print_insn_neon): Handle vdup.
(print_insn_mve): Handle new operands.
|
|
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new values.
(mve_opcodes): Add new instructions.
(vec_condnames): New array with vector conditions.
(mve_predicatenames): New array with predicate suffixes.
(mve_vec_sizename): New array with vector sizes.
(enum vpt_pred_state): New enum with vector predication states.
(struct vpt_block): New struct type for vpt blocks.
(vpt_block_state): Global struct to keep track of state.
(mve_extract_pred_mask): New helper function.
(num_instructions_vpt_block): Likewise.
(mark_outside_vpt_block): Likewise.
(mark_inside_vpt_block): Likewise.
(invert_next_predicate_state): Likewise.
(update_next_predicate_state): Likewise.
(update_vpt_block_state): Likewise.
(is_vpt_instruction): Likewise.
(is_mve_encoding_conflict): Add entries for new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_unpredictable): Handle new cases.
(print_instruction_predicate): Likewise.
(print_mve_size): New function.
(print_vec_condition): New function.
(print_insn_mve): Handle vpt blocks and new print operands.
|
|
in coprocessor instructions
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* arm-dis.c (print_insn_coprocessor_1): Disable the use of coprocessors
8, 14 and 15 for Armv8.1-M Mainline.
|
|
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): New enum.
(enum mve_unpredictable): Likewise.
(enum mve_undefined): Likewise.
(struct mopcode32): New struct.
(is_mve_okay_in_it): New function.
(is_mve_architecture): Likewise.
(arm_decode_field): Likewise.
(arm_decode_field_multiple): Likewise.
(is_mve_encoding_conflict): Likewise.
(is_mve_undefined): Likewise.
(is_mve_unpredictable): Likewise.
(print_mve_undefined): Likewise.
(print_mve_unpredictable): Likewise.
(print_insn_coprocessor_1): Use arm_decode_field_multiple.
(print_insn_mve): New function.
(print_insn_thumb32): Handle MVE architecture.
(select_arm_features): Force thumb for Armv8.1-m Mainline.
|
|
with address sanitization enabled.
PR 24538
gas * macro.c (get_any_string): Increase size of buffer used to hold
decimal value of expression result.
* dw2gencfi.c (get_debugseg_name): Handle an empty name.
* dwarf2dbg.c (get_filenum): Catch integer wraparound when
extending allocate file array.
(dwarf2_directive_filename): Add extra checks of the computed file
number.
* config/tc-arm.c (arm_tc_equal_in_insn): Insert copy of name into
warning hash table.
(s_arm_eabi_attribute): Check for obj_elf_vendor_attribute
returning -1.
* config/tc-i386.c (i386_output_nops): Catch an attempt to
generate nops of negative lengths.
* as.h (MAX_LITTLENUMS): Move definition to here from...
* config/atof-ieee.c: ...here.
* config/tc-aarch64.c: ...here.
* config/tc-arc.c: ...here.
* config/tc-arm.c: ...here.
* config/tc-epiphany.c: ...here.
* config/tc-i386.c: ...here.
* config/tc-ia64.c: ...here. (And correct the value).
* config/tc-m32c.c: ...here.
* config/tc-m32r.c: ...here.
* config/tc-metag.c: ...here.
* config/tc-microblaze.c: ...here.
* config/tc-nds32.c: ...here.
* config/tc-or1k.c: ...here.
* config/tc-score.c: ...here.
* config/tc-score7.c: ...here.
* config/tc-tic4x.c: ...here.
* config/tc-tilegx.c: ...here.
* config/tc-tilepro.c: ...here.
* config/tc-visium.c: ...here.
* config/tc-sh.c (md_assemble): Add check for an instruction with
no opcodes.
* config/tc-mips.c (mips_lookup_insn): Add check for very short
instruction name.
* config/tc-tic54x.c: Use unsigned chars to access is_end_of_line
array.
(tic54x_start_line_hook): Check for an empty line.
(next_line_shows_parallel): Do not walk off the end of the string.
(tic54x_macro_start): Check for too much macro nesting.
(tic54x_start_label): Add label_start parameter. Use this
parameter to check the first character of the label.
* config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Pass
line_start variable to tic54x_start_label.
PR 24538
opcodes * ia64-opc.c (ia64_find_matching_opcode): Check for reaching the
end of the table prematurely.
|
|
Release 6 of the MIPS architecture does not have an ADDI instruction.
ADD/SUB instructions with immediate operands can be expanded to load
and immediate value and then perform the operation.
gas/
* config/tc-mips.c (macro) <M_ADD_I, M_SUB_I, M_DADD_I, M_DSUB_I>:
Add expansions for MIPS r6.
* testsuite/gas/mips/add.s: Enable tests for R6.
* testsuite/gas/mips/daddi.s: Annotate to test DADD for R6.
* testsuite/gas/mips/mipsr6@add.d: Likewise.
* gas/testsuite/gas/mips/mipsr6@dadd.d: New test.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
opcodes/
* mips-opc.c (mips_opcodes): Enable ADD, SUB, DADD and DSUB
macros for R6.
|