aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2019-08-30[ARC] [COMMITTED] Fix FASTMATH field.Claudiu Zissulescu2-1/+6
Move FASTMATH to the right enum. 2019-08-30 Claudiu Zissulescu <claziss@gmail.com> * opcode/arc.h (FASTMATH): Move it from insn_class_t to insn_subclass_t enum.
2019-08-22ARM CMSE symbolsAlan Modra2-7/+4
This patch removes use of st_target_internal to cache the result of comparing symbol names against CMSE_PREFIX. The problem with setting a bit in st_target_internal in swap_symbol_in is that calling bfd_elf_sym_name from swap_symbol_in requires symtab_hdr, and you don't know for sure whether swap_symbol_in is operating on dynsyms (and thus elf_tdata (abfd)->dynsymtab_hdr should be used) or on the normal symtab (thus elf_tdata (abfd)->symtab_hdr). You can make an educated guess based on abfd->flags & DYNAMIC but that relies on knowing a lot about calls to bfd_elf_get_elf_syms, and is fragile in the face of possible future changes. include/ * elf/arm.h (ARM_GET_SYM_CMSE_SPCL, ARM_SET_SYM_CMSE_SPCL): Delete. bfd/ * elf32-arm.c (cmse_scan): Don't use ARM_GET_SYM_CMSE_SPCL, instead recognize CMSE_PREFIX in symbol name. (elf32_arm_gc_mark_extra_sections): Likewise. (elf32_arm_filter_cmse_symbols): Don't test ARM_GET_SYM_CMSE_SPCL. (elf32_arm_swap_symbol_in): Don't invoke ARM_SET_SYM_CMSE_SPCL.
2019-08-09Add support for a MIPS specific .MIPS.xhash section.Mihailo Stojanovic2-0/+11
This patch is a reimplementation of [1] which was submitted in 2015 by Neil Schellenberger. Copyright issue was sorted out [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (DT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering on the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word (ngnusyms) which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS-specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue as reported in [3], which is caused by the leading word added to the .MIPS.xhash section. Leading word is removed in this patch, and the number of entries in the translation table is now calculated using DT_MIPS_SYMTABNO dynamic tag (this is addressed by the corresponding glibc patch). Suggestions on coding style in [4] were taken into account. Existing GNU hash testcase was covered, and another one was added in the MIPS part of the testsuite. The other major change is reserving MIPS ABI version 5 for .MIPS.xhash, marking the need of support for .MIPS.xhash in the dynamic linker (again, addressed in the corresponding glibc patch). This is something which I am not sure of, especially after reading [5]. I am confused on whether this ABI version is reserved for IFUNC, or it can be used for this purpose. Already mentioned glibc patch is submitted at: https://sourceware.org/ml/libc-alpha/2019-06/msg00456.html [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html [4] https://sourceware.org/ml/binutils/2016-02/msg00097.html [5] https://sourceware.org/ml/libc-alpha/2016-12/msg00853.html ld * emulparams/elf32bmip.sh: Add .MIPS.xhash section. * emulparams/elf32bmipn32-defs.sh: Add .MIPS.xhash section. * emulparams/elf64bmip-defs.sh: Add .MIPS.xhash section. * emultempl/mipself.em: Remove mips_after_parse function. * testsuite/ld-elf/hash.d: Update comment. * testsuite/ld-mips-elf/hash1.d: New test. * testsuite/ld-mips-elf/hash1.s: Ditto. * testsuite/ld-mips-elf/hash1a.d: Remove. * testsuite/ld-mips-elf/hash1b.d: Ditto. * testsuite/ld-mips-elf/hash1c.d: Ditto * testsuite/ld-mips-elf/hash2.d: New test. * testsuite/ld-mips-elf/mips-elf.exp: New tests. * testsuite/ld-mips-elf/start.s: New test. bfd * elf-bfd.h (struct elf_backend_data): New members. * elflink.c (_bfd_elf_link_create_dynamic_sections): Create .gnu.hash section if necessary. (struct collect_gnu_hash_codes): New member. (elf_gnu_hash_process_symidx): New function name. (elf_renumber_gnu_hash_syms): Ignore local and undefined symbols. Record xlat location for every symbol which should have a .MIPS.xhash entry. (bfd_elf_size_dynamic_sections): Add DT_GNU_HASH dynamic tag to dynamic section if necessary. (GNU_HASH_SECTION_NAME): New define. (bfd_elf_size_dynsym_hash_dynstr): Get .MIPS.xhash section. Update the section size info. * elfxx-mips.c (struct mips_elf_hash_sort_data): New members. (struct mips_elf_link_hash_entry): New member. (mips_elf_link_hash_newfunc): Initialize .MIPS.xhash translation table location. (mips_elf_sort_hash_table): Initialize the pointer to the .MIPS.xhash section. (mips_elf_sort_hash_table_f): Populate the .MIPS.xhash translation table entry with the symbol dynindx. (_bfd_mips_elf_section_from_shdr): Add SHT_MIPS_XHASH. (_bfd_mips_elf_fake_sections): Initialize .MIPS.xhash section info. (_bfd_mips_elf_create_dynamic_sections): Create .MIPS.xhash section. (_bfd_mips_elf_size_dynamic_sections): Add DT_MIPS_XHASH tag to dynamic section. (_bfd_mips_elf_finish_synamic_sections): Add DT_MIPS_XHASH. (_bfd_mips_elf_final_write_processing): Set .MIPS.xhash section sh_link info. (_bfd_mips_elf_get_target_dtag): Get DT_MIPS_XHASH tag. (MIPS_LIBC_ABI_XHASH): New ABI version enum value. (_bfd_mips_post_process_headers): Mark the ABI version as MIPS_LIBC_ABI_XHASH if there exists a .MIPS.xhash section, but not a .hash section. (_bfd_mips_elf_record_xhash_symbol): New function. Record a position in the translation table, associated with the hash entry. * elfxx-mips.h (literal_reloc_p): Define elf_backend_record_xhash_symbol backend hook. * elfxx-target.h: Initialize elf_backend_record_xhash_symbol backend hook. include * elf/mips.h (SHT_GNU_XHASH): New define. (DT_GNU_XHASH): New define. binutils * readelf.c (get_mips_dynamic_type): Return MIPS_XHASH dynamic type. (get_mips_section_type_name): Return MI{S_XHASH name string. (dynamic_section_mips_val): Initialize the .MIPS.xhash dynamic info. (process_symbol_table): Initialize the .MIPS.xhash section pointer. Adjust the readelf output to support the new section. (process_object): Set the .MIPS.xhash dynamic info to zero.
2019-08-08Update the handling of shift rotate and load/store multiple instructions in ↵Yoshinori Sato2-48/+57
the H8300 assembler. incldue * opcode/h8300.h (EXPAND_UNOP_EXTENDED_B): Add MODEL. (EXPAND_UNOP_EXTENDED_W): Likewise. (EXPAND_UNOP_EXTENDED_L): Likewise. (struct h8_opcode h8_opcodes): Likewise. (struct h8_opcode h8_opcodes): tas / ldm / stm supported H8S or later.
2019-07-24[ARC] Update ARC opcode tableClaudiu Zissulescu2-0/+7
Update ARC opcode table by cleaning up invalid instructions, and fixing wrong encodings. opcodes/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> * arc-ext-tbl.h (bspeek): Remove it, added to main table. (bspop): Likewise. (modapp): Likewise. * arc-opc.c (RAD_CHK): Add. * arc-tbl.h: Regenerate. include/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> * include/opcode/arc.h (FASTMATH): Add. (SWITCH): Likewise.
2019-07-24PT_GNU_MBIND section mappingAlan Modra2-1/+8
* elf/internal.h (ELF_SECTION_IN_SEGMENT_1): Exclude non-alloc sections in GNU_MBIND segments.
2019-07-23Allow objdump to recognise the System.Runtime.dll files that get shipped ↵Omar Majid3-1/+61
with .NET Core 2.1. include * coff/i386.h (IMAGE_FILE_MACHINE_NATIVE_APPLE_OVERRIDE): Define. (IMAGE_FILE_MACHINE_NATIVE_FREEBSD_OVERRIDE): Define. (IMAGE_FILE_MACHINE_NATIVE_LINUX_OVERRIDE): Define. (IMAGE_FILE_MACHINE_NATIVE_NETBSD_OVERRIDE): Define. (I386_APPLE_MAGIC): Define. (I386_FREEBSD_MAGIC): Define. (I386_LINUX_MAGIC): Define. (I386_NETBSD_MAGIC): Define. (I386BADMAG): Extend macro to allow new magic numbers. * coff/x86_64.h (IMAGE_FILE_MACHINE_NATIVE_APPLE_OVERRIDE): Define. (IMAGE_FILE_MACHINE_NATIVE_FREEBSD_OVERRIDE): Define. (IMAGE_FILE_MACHINE_NATIVE_LINUX_OVERRIDE): Define. (IMAGE_FILE_MACHINE_NATIVE_NETBSD_OVERRIDE): Define. (AMD64_APPLE_MAGIC): Define. (AMD64_FREEBSD_MAGIC): Define. (AMD64_LINUX_MAGIC): Define. (AMD64_NETBSD_MAGIC): Define. (AMD64BADMAG): Extend macro to allow new magic numbers. bfd * coffcode.h (coff_set_arch_mach_hook): Handle I386_APPLE_MAGIC, I386_FREEBSD_MAGIC, I386_LINUX_MAGIC, I386_NETBSD_MAGIC, AMD64_APPLE_MAGIC, AMD64_FREEBSD_MAGIC, AMD64_LINUX_MAGIC, AMD64_NETBSD_MAGIC. * peXXigen.c: Add comment about source of .NET magic numbers. binutils* Makefile.am (AUTOMAKE_OPTIONS): Add subdir-objects (GENTESTDLLSPROG): Define. (TEST_PROGS): Add GENTESTDLLSPROG. * Makefile.in: Regenerate. * testsuite/binutils-all/objdump.exp (test_objdump_dotnet_assemblies): New proc. Run the new proc. * testsuite/gentestdlls.c: New source file.
2019-07-19[PowerPC64] pc-relative TLS relocationsAlan Modra2-2/+15
This patch supports using pcrel instructions in TLS code sequences. A number of new relocations are needed, gas operand modifiers to generate those relocations, and new TLS optimisation. For optimisation it turns out that the new pcrel GD and LD sequences can be distinguished from the non-pcrel GD and LD sequences by there being different relocations on the new sequence. The final "add ra,rb,13" on IE sequences similarly needs a new relocation, or as I chose, a modification of R_PPC64_TLS. On pcrel IE code, the R_PPC64_TLS points one byte into the "add" instruction rather than being on the instruction boundary. GD: pla 3,z@got@tlsgd@pcrel # R_PPC64_GOT_TLSGD34 bl __tls_get_addr@notoc(z@tlsgd) # R_PPC64_TLSGD and R_PPC64_REL24_NOTOC edited to IE pld 3,z@got@tprel@pcrel add 3,3,13 edited to LE paddi 3,13,z@tprel nop LD: pla 3,z@got@tlsld@pcrel # R_PPC64_GOT_TLSLD34 bl __tls_get_addr@notoc(z@tlsld) # R_PPC64_TLSLD and R_PPC64_REL24_NOTOC .. paddi 9,3,z2@dtprel pld 10,z3@got@dtprel@pcrel add 10,10,3 edited to LE paddi 3,13,0x1000 nop IE: pld 9,z@got@tprel@pcrel # R_PPC64_GOT_TPREL34 add 3,9,z@tls@pcrel # R_PPC64_TLS at insn+1 ldx 4,9,z@tls@pcrel lwax 5,9,z@tls@pcrel stdx 5,9,z@tls@pcrel edited to LE paddi 9,13,z@tprel nop ld 4,0(9) lwa 5,0(9) std 5,0(9) LE: paddi 10,13,z@tprel include/ * elf/ppc64.h (R_PPC64_TPREL34, R_PPC64_DTPREL34), (R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34), (R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define. (IS_PPC64_TLS_RELOC): Include new tls relocs. bfd/ * reloc.c (BFD_RELOC_PPC64_TPREL34, BFD_RELOC_PPC64_DTPREL34), (BFD_RELOC_PPC64_GOT_TLSGD34, BFD_RELOC_PPC64_GOT_TLSLD34), (BFD_RELOC_PPC64_GOT_TPREL34, BFD_RELOC_PPC64_GOT_DTPREL34), (BFD_RELOC_PPC64_TLS_PCREL): New pcrel tls relocs. * elf64-ppc.c (ppc64_elf_howto_raw): Add howtos for pcrel tls relocs. (ppc64_elf_reloc_type_lookup): Translate pcrel tls relocs. (must_be_dyn_reloc, dec_dynrel_count): Add R_PPC64_TPREL64. (ppc64_elf_check_relocs): Support pcrel tls relocs. (ppc64_elf_tls_optimize, ppc64_elf_relocate_section): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Map "tls@pcrel", "got@tlsgd@pcrel", "got@tlsld@pcrel", "got@tprel@pcrel", and "got@dtprel@pcrel". (fixup_size, md_assemble): Handle pcrel tls relocs. (ppc_force_relocation, ppc_fix_adjustable): Likewise. (md_apply_fix, tc_gen_reloc): Likewise. ld/ * testsuite/ld-powerpc/tlsgd.d, * testsuite/ld-powerpc/tlsgd.s, * testsuite/ld-powerpc/tlsie.d, * testsuite/ld-powerpc/tlsie.s, * testsuite/ld-powerpc/tlsld.d, * testsuite/ld-powerpc/tlsld.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2019-07-18libctf: introduce ctf_func_type_{info,args}, ctf_type_aname_rawNick Alcock2-1/+11
The first two of these allow you to get function type info and args out of the types section give a type ID: astonishingly, this was missing from libctf before now: so even though types of kind CTF_K_FUNCTION were supported, you couldn't find out anything about them. (The existing ctf_func_info and ctf_func_args only allow you to get info about functions in the function section, i.e. given symbol table indexes, not type IDs.) The second of these allows you to get the raw undecorated name out of the CTF section (strdupped for safety) without traversing subtypes to build a full C identifier out of it. It's useful for things that are already tracking the type kind etc and just need an unadorned name. include/ * ctf-api.h (ECTF_NOTFUNC): Fix description. (ctf_func_type_info): New. (ctf_func_type_args): Likewise. libctf/ * ctf-types.c (ctf_type_aname_raw): New. (ctf_func_type_info): Likewise. (ctf_func_type_args): Likewise. * ctf-error.c (_ctf_errlist): Fix description.
2019-07-16x86: fold SReg{2,3}Jan Beulich2-0/+5
They're the only exception to there generally being no mix of register kinds possible in an insn operand template, and there being two bits per operand for their representation is also quite wasteful, considering the low number of uses. Fold both bits and deal with the little bit of fallout. Also take the liberty and drop dead code trying to set REX_B: No segment register has RegRex set on it. Additionally I was quite surprised that PUSH/POP with the permitted segment registers is not covered by the test cases. Add the missing pieces.
2019-07-01[gas][aarch64][SVE2] Fix pmull{t,b} requirement on SVE2-AESMatthew Malcomson2-1/+6
I had mistakenly given all variants of the new SVE2 instructions pmull{t,b} a dependency on the feature +sve2-aes. Only the variant specifying .Q -> .D sizes should have that restriction. This patch fixes that mistake and updates the testsuite to have extra tests (matching the given set of tests per line in aarch64-tbl.h that the rest of the SVE2 tests follow). We also add a line in the documentation of the command line to clarify how to enable `pmull{t,b}` of this larger size. This is needed because all other instructions gated under the `sve2-aes` architecture extension are marked in the instruction documentation by an `HaveSVE2AES` check while pmull{t,b} is gated under the `HaveSVE2PMULL128` check. Regtested targeting aarch64-linux. gas/ChangeLog: 2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com> * testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests. * testsuite/gas/aarch64/illegal-sve2.l: Update tests. * doc/c-aarch64.texi: Add special note of pmull{t,b} instructions under the sve2-aes architecture extension. * testsuite/gas/aarch64/illegal-sve2.s: Add small size pmull{t,b} instructions. * testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b} disassembly. * testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b} instructions. include/ChangeLog: 2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): sve_size_013 renamed to sve_size_13. opcodes/ChangeLog: 2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new sve_size_13 icode to account for variant behaviour of pmull{t,b}. * aarch64-dis-2.c: Regenerate. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new sve_size_13 icode to account for variant behaviour of pmull{t,b}. * aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier. (OP_SVE_VVV_Q_D): Add new qualifier. (OP_SVE_VVV_QHD_DBS): Remove now unused qualifier. (struct aarch64_opcode): Split pmull{t,b} into those requiring AES and those not.
2019-06-21libctf: endianness fixesNick Alcock2-3/+12
Testing of the first code to generate CTF_K_SLICEs on big-endian revealed a bunch of new problems in this area. Most importantly, the trick we did earlier to avoid wasting two bytes on padding in the ctf_slice_t is best avoided: because it leads to the whole file after that point no longer being naturally aligned, all multibyte accesses from then on must use memmove() to avoid unaligned access on platforms where that is fatal. In future, this is planned, but for now we are still doing direct access in many places, so we must revert to making ctf_slice_t properly aligned for storage in an array. Rather than wasting bytes on padding, we boost the size of cts_offset and cts_bits. This is still a waste of space (we cannot have offsets or bits in bitfields > 256) but it cannot be avoided for now, and slices are not so common that this will be a serious problem. A possibly-worse endianness problem fixed at the same time involves a codepath used only for foreign-endian, uncompressed CTF files, where we were not copying the actual CTF data into the buffer, leading to libctf reading only zeroes (or, possibly, uninitialized garbage). Finally, when we read in a CTF file, we copy the header and work from the copy. We were flipping the endianness of the header copy, and of the body of the file buffer, but not of the header in the file buffer itself: so if we write the file back out again we end up with an unreadable frankenfile with header and body of different endiannesses. Fix by flipping both copies of the header. include/ * ctf.h (ctf_slice_t): Make cts_offset and cts_bits unsigned short, so following structures are properly aligned. libctf/ * ctf-open.c (get_vbytes_common): Return the new slice size. (ctf_bufopen): Flip the endianness of the CTF-section header copy. Remember to copy in the CTF data when opening an uncompressed foreign-endian CTF file. Prune useless variable manipulation.
2019-06-14Add R_AARCH64_P32_MOVW_PREL_* ELF32 relocsSzabolcs Nagy2-0/+10
These ilp32 relocations were missing for some reason. bfd/ChangeLog: * elfnn-aarch64.c: Enable MOVW_PREL relocs for ELF32. include/ChangeLog: * elf/aarch64.h (R_AARCH64_P32_MOVW_PREL_G0): Define. (R_AARCH64_P32_MOVW_PREL_G0_NC): Define. (R_AARCH64_P32_MOVW_PREL_G1): Define. ld/ChangeLog: * testsuite/ld-aarch64/aarch64-elf.exp: Add emit-relocs-22 and -23. * testsuite/ld-aarch64/emit-relocs-22.d: New test. * testsuite/ld-aarch64/emit-relocs-22.s: New test. * testsuite/ld-aarch64/emit-relocs-23.d: New test. * testsuite/ld-aarch64/emit-relocs-23.s: New test.
2019-06-04libctf: fix the type of ctf_enum.cte_valueNick Alcock2-1/+5
This stops the file format from depending on the size of the host int. (It does mean that we cannot encode enums with a value > 2^32 on platforms with an int > 2^32: this will be fixed in the next format revision.) include/ * ctf.h (ctf_enum.cte_value): Fix type to int32_t.
2019-05-31libctf: fix a number of build problems found on Solaris and NetBSDJose E. Marchesi2-7/+12
- Use of nonportable <endian.h> - Use of qsort_r - Use of zlib without appropriate magic to pull in the binutils zlib - Use of off64_t without checking (fixed by dropping the unused fields that need off64_t entirely) - signedness problems due to long being too short a type on 32-bit platforms: ctf_id_t is now 'unsigned long', and CTF_ERR must be used only for functions that return ctf_id_t - One lingering use of bzero() and of <sys/errno.h> All fixed, using code from gnulib where possible. Relatedly, set cts_size in a couple of places it was missed (string table and symbol table loading upon ctf_bfdopen()). binutils/ * objdump.c (make_ctfsect): Drop cts_type, cts_flags, and cts_offset. * readelf.c (shdr_to_ctf_sect): Likewise. include/ * ctf-api.h (ctf_sect_t): Drop cts_type, cts_flags, and cts_offset. (ctf_id_t): This is now an unsigned type. (CTF_ERR): Cast it to ctf_id_t. Note that it should only be used for ctf_id_t-returning functions. libctf/ * Makefile.am (ZLIB): New. (ZLIBINC): Likewise. (AM_CFLAGS): Use them. (libctf_a_LIBADD): New, for LIBOBJS. * configure.ac: Check for zlib, endian.h, and qsort_r. * ctf-endian.h: New, providing htole64 and le64toh. * swap.h: Code style fixes. (bswap_identity_64): New. * qsort_r.c: New, from gnulib (with one added #include). * ctf-decls.h: New, providing a conditional qsort_r declaration, and unconditional definitions of MIN and MAX. * ctf-impl.h: Use it. Do not use <sys/errno.h>. (ctf_set_errno): Now returns unsigned long. * ctf-util.c (ctf_set_errno): Adjust here too. * ctf-archive.c: Use ctf-endian.h. (ctf_arc_open_by_offset): Use memset, not bzero. Drop cts_type, cts_flags and cts_offset. (ctf_arc_write): Drop debugging dependent on the size of off_t. * ctf-create.c: Provide a definition of roundup if not defined. (ctf_create): Drop cts_type, cts_flags and cts_offset. (ctf_add_reftype): Do not check if type IDs are below zero. (ctf_add_slice): Likewise. (ctf_add_typedef): Likewise. (ctf_add_member_offset): Cast error-returning ssize_t's to size_t when known error-free. Drop CTF_ERR usage for functions returning int. (ctf_add_member_encoded): Drop CTF_ERR usage for functions returning int. (ctf_add_variable): Likewise. (enumcmp): Likewise. (enumadd): Likewise. (membcmp): Likewise. (ctf_add_type): Likewise. Cast error-returning ssize_t's to size_t when known error-free. * ctf-dump.c (ctf_is_slice): Drop CTF_ERR usage for functions returning int: use CTF_ERR for functions returning ctf_type_id. (ctf_dump_label): Likewise. (ctf_dump_objts): Likewise. * ctf-labels.c (ctf_label_topmost): Likewise. (ctf_label_iter): Likewise. (ctf_label_info): Likewise. * ctf-lookup.c (ctf_func_args): Likewise. * ctf-open.c (upgrade_types): Cast to size_t where appropriate. (ctf_bufopen): Likewise. Use zlib types as needed. * ctf-types.c (ctf_member_iter): Drop CTF_ERR usage for functions returning int. (ctf_enum_iter): Likewise. (ctf_type_size): Likewise. (ctf_type_align): Likewise. Cast to size_t where appropriate. (ctf_type_kind_unsliced): Likewise. (ctf_type_kind): Likewise. (ctf_type_encoding): Likewise. (ctf_member_info): Likewise. (ctf_array_info): Likewise. (ctf_enum_value): Likewise. (ctf_type_rvisit): Likewise. * ctf-open-bfd.c (ctf_bfdopen): Drop cts_type, cts_flags and cts_offset. (ctf_simple_open): Likewise. (ctf_bfdopen_ctfsect): Likewise. Set cts_size properly. * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.h: Likewise. * configure: Likewise.
2019-05-28libctf: debug dumpingNick Alcock2-0/+13
This introduces ctf_dump(), an iterator which returns a series of strings, each representing a debugging dump of one item from a given section in the CTF file. The items may be multiline: a callback is provided to allow the caller to decorate each line as they desire before the line is returned. libctf/ * ctf-dump.c: New. include/ * ctf-api.h (ctf_dump_decorate_f): New. (ctf_dump_state_t): new. (ctf_dump): New.
2019-05-28libctf: labelsNick Alcock2-0/+18
This facility allows you to associate regions of type IDs with *labels*, a labelled tiling of the type ID space. You can use these to define CTF containers with distinct parents for distinct ranges of the ID space, or to assist with parallelization of CTF processing, or for any other purpose you can think of. Notably absent from here (though declared in the API header) is any way to define new labels: this will probably be introduced soon, as part of the linker deduplication work. (One existed in the past, but was deeply tied to the Solaris CTF file generator and had to be torn out.) libctf/ * ctf-labels.c: New. include/ * ctf-api.h (ctf_label_f): New. (ctf_label_set): New. (ctf_label_get): New. (ctf_label_topmost): New. (ctf_label_info): New. (ctf_label_iter): New.
2019-05-28libctf: library version enforcementNick Alcock2-0/+5
This old Solaris standard allows callers to specify that they are expecting one particular API and/or CTF file format from the library. libctf/ * ctf-impl.h (_libctf_version): New declaration. * ctf-subr.c (_libctf_version): Define it. (ctf_version): New. include/ * ctf-api.h (ctf_version): New.
2019-05-28libctf: lookups by name and symbolNick Alcock2-0/+15
These functions allow you to look up types given a name in a simple subset of C declarator syntax (no function pointers), to look up the types of variables given a name, and to look up the types of data objects and the type signatures of functions given symbol table offsets. (Despite its name, one function in this commit, ctf_lookup_symbol_name(), is for the internal use of libctf only, and does not appear in any public header files.) libctf/ * ctf-lookup.c (isqualifier): New. (ctf_lookup_by_name): Likewise. (struct ctf_lookup_var_key): Likewise. (ctf_lookup_var): Likewise. (ctf_lookup_variable): Likewise. (ctf_lookup_symbol_name): Likewise. (ctf_lookup_by_symbol): Likewise. (ctf_func_info): Likewise. (ctf_func_args): Likewise. include/ * ctf-api.h (ctf_func_info): New. (ctf_func_args): Likewise. (ctf_lookup_by_symbol): Likewise. (ctf_lookup_by_symbol): Likewise. (ctf_lookup_variable): Likewise.
2019-05-28libctf: core type lookupNick Alcock2-0/+67
Finally we get to the functions used to actually look up and enumerate properties of types in a container (names, sizes, members, what type a pointer or cv-qual references, determination of whether two types are assignment-compatible, etc). With a very few exceptions these do not work for types newly added via ctf_add_*(): they only work on types in read-only containers, or types added before the most recent call to ctf_update(). This also adds support for lookup of "variables" (string -> type ID mappings) and for generation of C type names corresponding to a type ID. libctf/ * ctf-decl.c: New file. * ctf-types.c: Likewise. * ctf-impl.h: New declarations. include/ * ctf-api.h (ctf_visit_f): New definition. (ctf_member_f): Likewise. (ctf_enum_f): Likewise. (ctf_variable_f): Likewise. (ctf_type_f): Likewise. (ctf_type_isparent): Likewise. (ctf_type_ischild): Likewise. (ctf_type_resolve): Likewise. (ctf_type_aname): Likewise. (ctf_type_lname): Likewise. (ctf_type_name): Likewise. (ctf_type_sizee): Likewise. (ctf_type_align): Likewise. (ctf_type_kind): Likewise. (ctf_type_reference): Likewise. (ctf_type_pointer): Likewise. (ctf_type_encoding): Likewise. (ctf_type_visit): Likewise. (ctf_type_cmp): Likewise. (ctf_type_compat): Likewise. (ctf_member_info): Likewise. (ctf_array_info): Likewise. (ctf_enum_name): Likewise. (ctf_enum_value): Likewise. (ctf_member_iter): Likewise. (ctf_enum_iter): Likewise. (ctf_type_iter): Likewise. (ctf_variable_iter): Likewise.
2019-05-28libctf: ELF file opening via BFDNick Alcock2-0/+28
These functions let you open an ELF file with a customarily-named CTF section in it, automatically opening the CTF file or archive and associating the symbol and string tables in the ELF file with the CTF container, so that you can look up the types of symbols in the ELF file via ctf_lookup_by_symbol(), and so that strings can be shared between the ELF file and CTF container, to save space. It uses BFD machinery to do so. This has now been lightly tested and seems to work. In particular, if you already have a bfd you can pass it in to ctf_bfdopen(), and if you want a bfd made for you you can call ctf_open() or ctf_fdopen(), optionally specifying a target (or try once without a target and then again with one if you get ECTF_BFD_AMBIGUOUS back). We use a forward declaration for the struct bfd in ctf-api.h, so that ctf-api.h users are not required to pull in <bfd.h>. (This is mostly for the sake of readelf.) libctf/ * ctf-open-bfd.c: New file. * ctf-open.c (ctf_close): New. * ctf-impl.h: Include bfd.h. (ctf_file): New members ctf_data_mmapped, ctf_data_mmapped_len. (ctf_archive_internal): New members ctfi_abfd, ctfi_data, ctfi_bfd_close. (ctf_bfdopen_ctfsect): New declaration. (_CTF_SECTION): likewise. include/ * ctf-api.h (struct bfd): New forward. (ctf_fdopen): New. (ctf_bfdopen): Likewise. (ctf_open): Likewise. (ctf_arc_open): Likewise.
2019-05-28libctf: mmappable archivesNick Alcock3-0/+91
If you need to store a large number of CTF containers somewhere, this provides a dedicated facility for doing so: an mmappable archive format like a very simple tar or ar without all the system-dependent format horrors or need for heavy file copying, with built-in compression of files above a particular size threshold. libctf automatically mmap()s uncompressed elements of these archives, or uncompresses them, as needed. (If the platform does not support mmap(), copying into dynamically-allocated buffers is used.) Archive iteration operations are partitioned into raw and non-raw forms. Raw operations pass thhe raw archive contents to the callback: non-raw forms open each member with ctf_bufopen() and pass the resulting ctf_file_t to the iterator instead. This lets you manipulate the raw data in the archive, or the contents interpreted as a CTF file, as needed. It is not yet known whether we will store CTF archives in a linked ELF object in one of these (akin to debugdata) or whether they'll get one section per TU plus one parent container for types shared between them. (In the case of ELF objects with very large numbers of TUs, an archive of all of them would seem preferable, so we might just use an archive, and add lzma support so you can assume that .gnu_debugdata and .ctf are compressed using the same algorithm if both are present.) To make usage easier, the ctf_archive_t is not the on-disk representation but an abstraction over both ctf_file_t's and archives of many ctf_file_t's: users see both CTF archives and raw CTF files as ctf_archive_t's upon opening, the only difference being that a raw CTF file has only a single "archive member", named ".ctf" (the default if a null pointer is passed in as the name). The next commit will make use of this facility, in addition to providing the public interface to actually open archives. (In the future, it should be possible to have all CTF sections in an ELF file appear as an "archive" in the same fashion.) This machinery is also used to allow library-internal creators of ctf_archive_t's (such as the next commit) to stash away an ELF string and symbol table, so that all opens of members in a given archive will use them. This lets CTF archives exploit the ELF string and symbol table just like raw CTF files can. (All this leads to somewhat confusing type naming. The ctf_archive_t is a typedef for the opaque internal type, struct ctf_archive_internal: the non-internal "struct ctf_archive" is the on-disk structure meant for other libraries manipulating CTF files. It is probably clearest to use the struct name for struct ctf_archive_internal inside the program, and the typedef names outside.) libctf/ * ctf-archive.c: New. * ctf-impl.h (ctf_archive_internal): New type. (ctf_arc_open_internal): New declaration. (ctf_arc_bufopen): Likewise. (ctf_arc_close_internal): Likewise. include/ * ctf.h (CTFA_MAGIC): New. (struct ctf_archive): New. (struct ctf_archive_modent): Likewise. * ctf-api.h (ctf_archive_member_f): New. (ctf_archive_raw_member_f): Likewise. (ctf_arc_write): Likewise. (ctf_arc_close): Likewise. (ctf_arc_open_by_name): Likewise. (ctf_archive_iter): Likewise. (ctf_archive_raw_iter): Likewise. (ctf_get_arc): Likewise.
2019-05-28libctf: openingNick Alcock2-0/+26
This fills in the other half of the opening/creation puzzle: opening of already-existing CTF files. Such files are always read-only: if you want to add to a CTF file opened with one of the opening functions in this file, use ctf_add_type(), in a later commit, to copy appropriate types into a newly ctf_create()d, writable container. The lowest-level opening functions are in here: ctf_bufopen(), which takes ctf_sect_t structures akin to ELF section headers, and ctf_simple_open(), which can be used if you don't have an entire ELF section header to work from. Both will malloc() new space for the buffers only if necessary, will mmap() directly from the file if requested, and will mprotect() it afterwards to prevent accidental corruption of the types. These functions are also used by ctf_update() when converting types in a writable container into read-only types that can be looked up using the lookup functions (in later commits). The files are always of the native endianness of the system that created them: at read time, the endianness of the header magic number is used to determine whether or not the file needs byte-swapping, and the entire thing is aggressively byte-swapped. The agggressive nature of this swapping avoids complicating the rest of the code with endianness conversions, while the native endianness introduces no byte-swapping overhead in the common case. (The endianness-independence code is also much newer than everything else in this file, and deserves closer scrutiny.) The accessors at the top of the file are there to transparently support older versions of the CTF file format, allowing translation from older formats that have different sizes for the structures in ctf.h: currently, these older formats are intermingled with the newer ones in ctf.h: they will probably migrate to a compatibility header in time, to ease readability. The ctf_set_base() function is split out for the same reason: when conversion code to a newer format is written, it would need to malloc() new storage for the entire ctf_file_t if a file format change causes it to grow, and for that we need ctf_set_base() to be a separate function. One pair of linked data structures supported by this file has no creation code in libctf yet: the data and function object sections read by init_symtab(). These will probably arrive soon, when the linker comes to need them. (init_symtab() has hardly been changed since 2009, but if any code in libctf has rotted over time, this will.) A few simple accessors are also present that can even be called on read-only containers because they don't actually modify them, since the relevant things are not stored in the container but merely change its operation: ctf_setmodel(), which lets you specify whether a container is LP64 or not (used to statically determine the sizes of a few types), ctf_import(), which is the only way to associate a parent container with a child container, and ctf_setspecific(), which lets the caller associate an arbitrary pointer with the CTF container for any use. If the user doesn't call these functions correctly, libctf will misbehave: this is particularly important for ctf_import(), since a container built against a given parent container will not be able to resolve types that depend on types in the parent unless it is ctf_import()ed with a parent container with the same set of types at the same IDs, or a superset. Possible future extensions (also noted in the ctf-hash.c file) include storing a count of things so that we don't need to do one pass over the CTF file counting everything, and computing a perfect hash at CTF creation time in some compact form, storing it in the CTF file, and using it to hash things so we don't need to do a second pass over the entire CTF file to set up the hashes used to go from names to type IDs. (There are multiple such hashes, one for each C type namespace: types, enums, structs, and unions.) libctf/ * ctf-open.c: New file. * swap.h: Likewise. include/ * ctf-api.h (ctf_file_close): New declaration. (ctf_getdatasect): Likewise. (ctf_parent_file): Likewise. (ctf_parent_name): Likewise. (ctf_parent_name_set): Likewise. (ctf_import): Likewise. (ctf_setmodel): Likewise. (ctf_getmodel): Likewise. (ctf_setspecific): Likewise. (ctf_getspecific): Likewise.
2019-05-28libctf: creation functionsNick Alcock2-0/+176
The CTF creation process looks roughly like (error handling elided): int err; ctf_file_t *foo = ctf_create (&err); ctf_id_t type = ctf_add_THING (foo, ...); ctf_update (foo); ctf_*write (...); Some ctf_add_THING functions accept other type IDs as arguments, depending on the type: cv-quals, pointers, and structure and union members all take other types as arguments. So do 'slices', which let you take an existing integral type and recast it as a type with a different bitness or offset within a byte, for bitfields. One class of THING is not a type: "variables", which are mappings of names (in the internal string table) to types. These are mostly useful when encoding variables that do not appear in a symbol table but which some external user has some other way to figure out the address of at runtime (dynamic symbol lookup or querying a VM interpreter or something). You can snapshot the creation process at any point: rolling back to a snapshot deletes all types and variables added since that point. You can make arbitrary type queries on the CTF container during the creation process, but you must call ctf_update() first, which translates the growing dynamic container into a static one (this uses the CTF opening machinery, added in a later commit), which is quite expensive. This function must also be called after adding types and before writing the container out. Because addition of types involves looking up existing types, we add a little of the type lookup machinery here, as well: only enough to look up types in dynamic containers under construction. libctf/ * ctf-create.c: New file. * ctf-lookup.c: New file. include/ * ctf-api.h (zlib.h): New include. (ctf_sect_t): New. (ctf_sect_names_t): Likewise. (ctf_encoding_t): Likewise. (ctf_membinfo_t): Likewise. (ctf_arinfo_t): Likewise. (ctf_funcinfo_t): Likewise. (ctf_lblinfo_t): Likewise. (ctf_snapshot_id_t): Likewise. (CTF_FUNC_VARARG): Likewise. (ctf_simple_open): Likewise. (ctf_bufopen): Likewise. (ctf_create): Likewise. (ctf_add_array): Likewise. (ctf_add_const): Likewise. (ctf_add_enum_encoded): Likewise. (ctf_add_enum): Likewise. (ctf_add_float): Likewise. (ctf_add_forward): Likewise. (ctf_add_function): Likewise. (ctf_add_integer): Likewise. (ctf_add_slice): Likewise. (ctf_add_pointer): Likewise. (ctf_add_type): Likewise. (ctf_add_typedef): Likewise. (ctf_add_restrict): Likewise. (ctf_add_struct): Likewise. (ctf_add_union): Likewise. (ctf_add_struct_sized): Likewise. (ctf_add_union_sized): Likewise. (ctf_add_volatile): Likewise. (ctf_add_enumerator): Likewise. (ctf_add_member): Likewise. (ctf_add_member_offset): Likewise. (ctf_add_member_encoded): Likewise. (ctf_add_variable): Likewise. (ctf_set_array): Likewise. (ctf_update): Likewise. (ctf_snapshot): Likewise. (ctf_rollback): Likewise. (ctf_discard): Likewise. (ctf_write): Likewise. (ctf_gzwrite): Likewise. (ctf_compress_write): Likewise.
2019-05-28libctf: error handlingNick Alcock2-0/+7
CTF functions return zero on success or an extended errno value which can be translated into a string via the functions in this commit. The errno numbers start at -CTF_BASE. libctf/ * ctf-error.c: New file. include/ * ctf-api.h (ctf_errno): New declaration. (ctf_errmsg): Likewise.
2019-05-28libctf: lowest-level memory allocation and debug-dumping wrappersNick Alcock2-0/+8
The memory-allocation wrappers are simple things to allow malloc interposition: they are only used inconsistently at present, usually where malloc debugging was required in the past. These provide a default implementation that is environment-variable triggered (initialized on the first call to the libctf creation and file-opening functions, the first functions people will use), and a ctf_setdebug()/ctf_getdebug() pair that allows the caller to explicitly turn debugging off and on. If ctf_setdebug() is called, the automatic setting from an environment variable is skipped. libctf/ * ctf-impl.h: New file. * ctf-subr.c: New file. include/ * ctf-api.h (ctf_setdebug): New. (ctf_getdebug): Likewise.
2019-05-28include: new header ctf-api.hNick Alcock2-0/+134
This non-installed header is the means by which libctf consumers communicate with libctf. This header will be extended in subsequent commits. include/ * ctf-api.h: New file.
2019-05-28include: new header ctf.h: file format descriptionNick Alcock2-0/+521
The data structures and macros in this header can be used, if desired, to access or create CTF files directly, without going through libctf, though this should rarely be necessary in practice. libctf relies on this header as its description of the CTF file format. include/ * ctf.h: New file.
2019-05-24aarch64: add STO_AARCH64_VARIANT_PCS and DT_AARCH64_VARIANT_PCSSzabolcs Nagy2-0/+10
The bottom 2 bits of st_other are used for visibility, the top 6 bits are de facto reserved for processor specific use. This patch defines a bits to mark function symbols that follow a variant procedure call standard with different register usage convention. A dynamic tag is also defined that marks modules with R_<CLS>_JUMP_SLOT relocations referencing symbols marked with STO_AARCH64_VARIANT_PCS. This can be used by dynamic linkers that support lazy binding to decide what registers need to be preserved during symbol resolution. binutils/ChangeLog: * readelf.c (get_aarch64_dynamic_type): Handle DT_AARCH64_VARIANT_PCS. (get_aarch64_symbol_other): New, handles STO_AARCH64_VARIANT_PCS. (get_symbol_other): Call get_aarch64_symbol_other. include/ChangeLog: * elf/aarch64.h (DT_AARCH64_VARIANT_PCS): Define. (STO_AARCH64_VARIANT_PCS): Define.
2019-05-24PowerPC relocations for prefix insnsAlan Modra2-0/+36
include/ * elf/ppc64.h (R_PPC64_PLTSEQ_NOTOC, R_PPC64_PLTCALL_NOTOC), (R_PPC64_PCREL_OPT, R_PPC64_D34, R_PPC64_D34_LO, R_PPC64_D34_HI30), (R_PPC64_D34_HA30, R_PPC64_PCREL34, R_PPC64_GOT_PCREL34), (R_PPC64_PLT_PCREL34, R_PPC64_PLT_PCREL34_NOTOC), (R_PPC64_ADDR16_HIGHER34, R_PPC64_ADDR16_HIGHERA34), (R_PPC64_ADDR16_HIGHEST34, R_PPC64_ADDR16_HIGHESTA34), (R_PPC64_REL16_HIGHER34, R_PPC64_REL16_HIGHERA34), (R_PPC64_REL16_HIGHEST34, R_PPC64_REL16_HIGHESTA34), (R_PPC64_D28, R_PPC64_PCREL28): Define. bfd/ * reloc.c (BFD_RELOC_PPC64_D34, BFD_RELOC_PPC64_D34_LO), (BFD_RELOC_PPC64_D34_HI30, BFD_RELOC_PPC64_D34_HA30), (BFD_RELOC_PPC64_PCREL34, BFD_RELOC_PPC64_GOT_PCREL34), (BFD_RELOC_PPC64_PLT_PCREL34), (BFD_RELOC_PPC64_ADDR16_HIGHER34, BFD_RELOC_PPC64_ADDR16_HIGHERA34), (BFD_RELOC_PPC64_ADDR16_HIGHEST34, BFD_RELOC_PPC64_ADDR16_HIGHESTA34), (BFD_RELOC_PPC64_REL16_HIGHER34, BFD_RELOC_PPC64_REL16_HIGHERA34), (BFD_RELOC_PPC64_REL16_HIGHEST34, BFD_RELOC_PPC64_REL16_HIGHESTA34), (BFD_RELOC_PPC64_D28, BFD_RELOC_PPC64_PCREL28): New reloc enums. * elf64-ppc.c (PNOP): Define. (ppc64_elf_howto_raw): Add reloc howtos for new relocations. (ppc64_elf_reloc_type_lookup): Translate new bfd reloc numbers. (ppc64_elf_ha_reloc): Adjust addend for highera34 and highesta34 relocs. (ppc64_elf_prefix_reloc): New function. (struct ppc_link_hash_table): Add notoc_plt. (is_branch_reloc): Add R_PPC64_PLTCALL_NOTOC. (is_plt_seq_reloc): Add R_PPC64_PLT_PCREL34, R_PPC64_PLT_PCREL34_NOTOC, and R_PPC64_PLTSEQ_NOTOC. (ppc64_elf_check_relocs): Handle pcrel got and plt relocs. Set has_pltcall for section on seeing R_PPC64_PLTCALL_NOTOC. Handle possible need for dynamic relocs on non-pcrel powerxx relocs. (dec_dynrel_count): Handle non-pcrel powerxx relocs. (ppc64_elf_inline_plt): Handle R_PPC64_PLTCALL_NOTOC. (toc_adjusting_stub_needed): Likewise. (ppc64_elf_tls_optimize): Handle R_PPC64_PLTSEQ_NOTOC. (ppc64_elf_relocate_section): Handle new powerxx relocs. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @pcrel, @got@pcrel, @plt@pcrel, @higher34, @highera34, @highest34, and @highesta34. (fixup_size): Handle new powerxx relocs. (md_assemble): Warn for @pcrel on non-prefix insns. Accept @l, @h and @ha on prefix insns, and infer reloc without any @ suffix. Translate powerxx relocs to suit DQ and DS field instructions. Include operand tests as well as opcode test to translate BFD_RELOC_HI16_S to BFD_RELOC_PPC_16DX_HA. (ppc_fix_adjustable): Return false for pcrel GOT and PLT relocs. (md_apply_fix): Handle new powerxx relocs. * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): Accept BFD_RELOC_PPC64_ADDR16_HIGHER34, BFD_RELOC_PPC64_ADDR16_HIGHERA34, BFD_RELOC_PPC64_ADDR16_HIGHEST34, BFD_RELOC_PPC64_ADDR16_HIGHESTA34, BFD_RELOC_PPC64_D34, and BFD_RELOC_PPC64_D28. * testsuite/gas/ppc/prefix-reloc.d, * testsuite/gas/ppc/prefix-reloc.s: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2019-05-24PowerPC add initial -mfuture instruction supportPeter Bergner3-0/+28
This patch adds initial 64-bit insn assembler/disassembler support. The only instruction added is "pnop" along with the automatic aligning of prefix instruction so they do not cross 64-byte boundaries. include/ * dis-asm.h (WIDE_OUTPUT): Define. * opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare. (PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX), (PPC_PREFIX_P, PPC_PREFIX_SEG): Define. opcodes/ * ppc-dis.c (ppc_opts): Add "future" entry. (PREFIX_OPCD_SEGS): Define. (prefix_opcd_indices): New array. (disassemble_init_powerpc): Initialize prefix_opcd_indices. (lookup_prefix): New function. (print_insn_powerpc): Handle 64-bit prefix instructions. * ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK), (PMRR, POWERXX): Define. (prefix_opcodes): New instruction table. (prefix_num_opcodes): New constant. binutils/ * objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes. (struct insn_label_list): New. (insn_labels, free_insn_labels): New variables. (ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs. (ppc_frob_label, ppc_new_dot_label): Move functions earlier in file and call ppc_record_label. (md_assemble): Handle 64-bit prefix instructions. Align labels that are on the same line as a prefix instruction. * config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to later in the file. (md_start_line_hook): Define. (ppc_start_line_hook): Declare. * testsuite/gas/ppc/prefix-align.d, * testsuite/gas/ppc/prefix-align.s: New test. * testsuite/gas/ppc/ppc.exp: Run new test.
2019-05-23include: add elf/bpf.hJose E. Marchesi2-0/+49
This patch adds a header file with BPF-specific ELF definitions. In particular, the architecture relocations. include/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * elf/bpf.h: New file.
2019-05-16[PATCH 1/57][Arm][GAS]: Add support for +mve and +mve.fpAndre Vieira3-0/+8
bfd/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add case for Tag_MVE_arch. binutils/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values. (arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch. elfcpp/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * arm.h (Tag_MVE_arch): Define new enum value. gas/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (mve_ext, mve_fp_ext): New features. (armv8_1m_main_ext_table): Add new extensions. (aeabi_set_public_attributes): Translate new features to new build attributes. (arm_convert_symbolic_attribute): Add Tag_MVE_arch. * doc/c-arm.texi: Document new extensions and new build attribute. include/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * elf/arm.h (Tag_MVE_arch): Define new enum value. * opcode/arm.h (FPU_MVE, FPU_MVE_FP): New MACROs for new features.
2019-05-09[binutils][aarch64] New SVE_SHLIMM_UNPRED_22 operand.Matthew Malcomson2-0/+6
New operand describes a shift-left immediate encoded in bits 22:20-19:18-16 where UInt(bits) - esize == shift. This operand is useful for instructions like sshllb. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_SHLIMM_UNPRED_22 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_SHLIMM_UNPRED_22 operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_SHLIMM_UNPRED_22. (aarch64_print_operand): Add printing for SVE_SHLIMM_UNPRED_22. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHLIMM_UNPRED_22 operand.
2019-05-09[binutils][aarch64] New sve_size_tsz_bhs iclass.Matthew Malcomson2-0/+6
Add sve_size_tsz_bhs iclass needed for sqxtnb and similar instructions. This iclass encodes one of three variants by the most significant bit set in a 3-bit value where only one bit may be set. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_tsz_bhs iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_tsz_bhs iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_tsz_bhs iclass decode.
2019-05-09[binutils][aarch64] New SVE_Zm4_11_INDEX operand.Matthew Malcomson2-0/+5
This includes defining a new single bit field SVE_i2h at position 20. SVE_Zm4_11_INDEX handles indexed Zn registers where the index is encoded in bits 20:11 and the register is chosed from range z0-z15 in bits 19-16. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm4_11_INDEX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm4_11_INDEX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_Zm4_11_INDEX. (aarch64_print_operand): Add printing for SVE_Zm4_11_INDEX. (fields): Handle SVE_i2h field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_i2h field. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm4_11_INDEX operand.
2019-05-09[binutils][aarch64] New sve_shift_tsz_bhsd iclass.Matthew Malcomson2-0/+6
This new iclass encodes the variant by which is the most significant bit used of bits 23-22:20-19, where those bits are usually part of a given constant operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_shift_tsz_bhsd iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_shift_tsz_bhsd iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_shift_tsz_bhsd iclass decode.
2019-05-09[binutils][aarch64] New SVE_SHRIMM_UNPRED_22 operand.Matthew Malcomson2-0/+8
Include a new iclass to extract the variant from the most significant 3 bits of this operand. Instructions such as rshrnb include a constant shift amount as an operand, where the most significant three bits of this operand determine what size elements the instruction is operating on. The new SVE_SHRIMM_UNPRED_22 operand denotes this constant encoded in bits 22:20-19:18-16 while the new sve_shift_tsz_hsd iclass denotes that the SVE qualifier is encoded in bits 22:20-19. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_SHRIMM_UNPRED_22 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_SHRIMM_UNPRED_22 operand. (enum aarch64_insn_class): Add sve_shift_tsz_hsd iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-asm.c (aarch64_ins_sve_shrimm): (aarch64_encode_variant_using_iclass): Handle sve_shift_tsz_hsd iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_shift_tsz_hsd iclass decode. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_SHRIMM_UNPRED_22. (aarch64_print_operand): Add printing for SVE_SHRIMM_UNPRED_22. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHRIMM_UNPRED_22 operand.
2019-05-09[binutils][aarch64] New sve_size_013 iclass.Matthew Malcomson2-0/+5
Add sve_size_013 instruction class This new iclass handles instructions such as pmullb whose size specifier can only be encoded as 0, 1, or 3. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_013 iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_013 iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_013 iclass decode.
2019-05-09[binutils][aarch64] New sve_size_bh iclass.Matthew Malcomson2-0/+5
Add new iclass sve_size_bh to handle instructions that have two variants encoded with the SVE_sz field. This iclass behaves the same as the sve_size_sd iclass, but it has a nicer name for those instructions that choose between variants using the "B" and "H" size qualifiers. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_bh iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_bh iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_bh iclass decode.
2019-05-09[binutils][aarch64] New sve_size_sd2 iclass.Matthew Malcomson2-0/+5
Define new sve_size_sd2 iclass to distinguish between the two variants of ldnt1sb and ldnt1sh. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_sd2 iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_sd2 iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_sd2 iclass decode. * aarch64-opc.c (fields): Handle SVE_sz2 field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_sz2 field.
2019-05-09[binutils][aarch64] New SVE_ADDR_ZX operand.Matthew Malcomson2-0/+5
Add AARCH64_OPND_SVE_ADDR_ZX operand that allows a vector of addresses in a Zn register, offset by an Xm register. This is used with scatter/gather SVE2 instructions. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (REG_ZR): Macro specifying zero register. (parse_address_main): Account for new addressing mode [Zn.S, Xm]. (parse_operands): Handle new SVE_ADDR_ZX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_ADDR_ZX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_ADDR_ZX. (aarch64_print_operand): Add printing for SVE_ADDR_ZX. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_ADDR_ZX operand.
2019-05-09[binutils][aarch64] New SVE_Zm3_11_INDEX operand.Matthew Malcomson2-0/+5
Introduce new operand SVE_Zm3_11_INDEX that indicates a register between z0-z7 stored in bits 18-16 and an index stored in bits 20-19:11. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm3_11_INDEX operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm3_11_INDEX operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_Zm3_11_INDEX. (aarch64_print_operand): Add printing for SVE_Zm3_11_INDEX. (fields): Handle SVE_i3l and SVE_i3h2 fields. * aarch64-opc.h (enum aarch64_field_kind): New SVE_i3l and SVE_i3h2 fields. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm3_11_INDEX operand.
2019-05-09[binutils][aarch64] New iclass sve_size_hsd2.Matthew Malcomson2-0/+5
Add "sve_size_hsd2" iclass decode that uses the new FLD_SVE_size field value to determine the variant of an instruction. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_hsd2 iclass. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle sve_size_hsd2 iclass encode. * aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle sve_size_hsd2 iclass decode. * aarch64-opc.c (fields): Handle SVE_size field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_size field.
2019-05-09[binutils][aarch64] Introduce SVE_IMM_ROT3 operand.Matthew Malcomson2-0/+5
New operand AARCH64_OPND_SVE_IMM_ROT3 handles a single bit rotate operand encoded at bit position 10. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c (parse_operands): Handle new SVE_IMM_ROT3 operand. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New SVE_IMM_ROT3 operand. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Constraint checking for SVE_IMM_ROT3. (aarch64_print_operand): Add printing for SVE_IMM_ROT3. (fields): Handle SVE_rot3 field. * aarch64-opc.h (enum aarch64_field_kind): New SVE_rot3 field. * aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_IMM_ROT3 operand.
2019-05-09[binutils][aarch64] SVE2 feature extension flags.Matthew Malcomson2-0/+14
Include all feature flag macros. The "sve2" extension that enables the core sve2 instructions. This also enables the sve extension, since sve is a requirement of sve2. Extra optional sve2 features are the bitperm, sm4, aes, and sha3 extensions. These are all given extra feature flags, "bitperm", "sve2-sm4", "sve2-aes", and "sve2-sha3" respectively. The sm4, aes, and sha3 extensions are explicitly marked as sve2 extensions to distinguish them from the corresponding NEON extensions. Rather than continue extending the current feature flag numbers, I used some bits that have been skipped. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c: Add command line architecture feature flags "sve2", "sve2-sm4", "sve2-aes", "sve2-sha3", "bitperm". * doc/c-aarch64.texi: Document new architecture feature flags. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SVE2 AARCH64_FEATURE_SVE2_AES, AARCH64_FEATURE_SVE2_BITPERM, AARCH64_FEATURE_SVE2_SM4, AARCH64_FEATURE_SVE2_SHA3): New feature macros. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-tbl.h (aarch64_feature_sve2, aarch64_feature_sve2aes, aarch64_feature_sve2sha3, aarch64_feature_sve2sm4, aarch64_feature_sve2bitperm): New feature sets. (SVE2, SVE2_AES, SVE2_SHA3, SVE2_SM4, SVE2_BITPERM): New macros for feature set addresses. (SVE2_INSN, SVE2_INSNC, SVE2AES_INSN, SVE2SHA3_INSN, SVE2SM4_INSN, SVE2SM4_INSNC, SVE2BITPERM_INSN): New macros.
2019-05-06Add load-link, store-conditional paired EVA instructionsFaraz Shahbazker2-0/+11
Add paired load-link and store-conditional instructions to the EVA ASE for MIPS32R6[1]. These instructions are optional within the EVA ASE. Their presence is indicated by the XNP bit in the Config5 register. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 230-231, pp. 357-360. gas/ * config/tc-mips.c (mips_set_ase): Handle ASE_EVA_R6. (macro) <M_LLWPE_AB, M_SCWPE_AB>: New cases. (mips_after_parse_args): Translate EVA to EVA_R6. * testsuite/gas/mips/ase-errors-1.s: Add new instructions. * testsuite/gas/mips/eva.s: Likewise. * testsuite/gas/mips/ase-errors-1.l: Check errors for new instructions. * testsuite/gas/mips/mipsr6@eva.d: Check new test cases. include/ * opcode/mips.h (ASE_EVA_R6): New macro. (M_LLWPE_AB, M_SCWPE_AB): New enum values. opcodes/ * mips-dis.c (mips_calculate_combination_ases): Add ISA argument and set ASE_EVA_R6 appropriately. (set_default_mips_dis_options): Pass ISA to above. (parse_mips_dis_option): Likewise. * mips-opc.c (EVAR6): New macro. (mips_builtin_opcodes): Add llwpe, scwpe. Derived from patch authored by Andrew Bennett <andrew.bennett@imgtec.com>
2019-05-01[BINUTILS, AArch64] Enable Transactional Memory ExtensionSudakshina Das2-1/+8
This patch enables the new Transactional Memory Extension added recently as part of Arm's new architecture technologies. We introduce a new optional extension "tme" to enable this. The following instructions are part of the extension: * tstart <Xt> * ttest <Xt> * tcommit * tcancel #<imm> The ISA for the above can be found here: https://developer.arm.com/docs/ddi0602/latest/base-instructions-alphabetic-order *** gas/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add case for AARCH64_OPND_TME_UIMM16. (aarch64_features): Add "tme". * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/tme-invalid.d: New test. * testsuite/gas/aarch64/tme-invalid.l: New test. * testsuite/gas/aarch64/tme-invalid.s: New test. * testsuite/gas/aarch64/tme.d: New test. * testsuite/gas/aarch64/tme.s: New test. *** include/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_TME): New. (enum aarch64_opnd): Add AARCH64_OPND_TME_UIMM16. *** opcodes/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Add case for AARCH64_OPND_TME_UIMM16. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_IMM_NIL): New. (TME): New. (_TME_INSN): New. (struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel.
2019-04-26[MIPS] Add load-link, store-conditional paired instructionsAndrew Bennett2-0/+10
Add several baseline MIPS32R6[1] and MIPS64R6[2] instructions that were omitted from the initial spec. These instructions are optional in implementations but not associated with any ASE or pseudo-ASE. Their presence is indicated by the XNP bit in the Config5 register. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 228-229, pp. 354-357. [2] "MIPS Architecture for Programmers Volume II-A: The MIPS64 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 289-290 and pp. 458-460. gas/ * config/tc-mips.c (macro) <M_LLWP_AB, M_LLDP_AB, M_SCWP_AB, M_SCDP_AB>: New cases and expansions for paired instructions. * testsuite/gas/mips/llpscp-32.s: New test source. * testsuite/gas/mips/llpscp-64.s: Likewise. * testsuite/gas/mips/llpscp-32.d: New test. * testsuite/gas/mips/llpscp-64.d: Likewise. * testsuite/gas/mips/mips.exp: Run the new tests. * testsuite/gas/mips/r6.s: Add new instructions to test source. * testsuite/gas/mips/r6-64.s: Likewise. * testsuite/gas/mips/r6-64-n32.d: Check new instructions. * testsuite/gas/mips/r6-64-n64.d: Likewise. * testsuite/gas/mips/r6-n32.d: Likewise. * testsuite/gas/mips/r6-n64.d: Likwwise. * testsuite/gas/mips/r6.d: Likewise. include/ * opcode/mips.h (M_LLWP_AB, M_LLDP_AB): New enum values. (M_SCWP_AB, M_SCDP_AB): Likewise. opcodes/ * mips-opc.c (mips_builtin_opcodes): Add llwp, lldp, scwp, scdp.
2019-04-25MIPS/include: opcode/mips.h: Update stale comment for CODE20 operandMaciej W. Rozycki2-2/+6
Complement commit 1586d91e32ea ("/ 0 should send SIGFPE not SIGTRAP..."), <https://sourceware.org/ml/binutils/2004-07/msg00260.html>, and update a stale comment referring the 20-bit code field of the BREAK and SDBBP instructions, by making it explicit that where permitted by choosing the MIPS32 or a later ISA the whole field can now be set with a single operand for the SDBBP instruction only. include/ * opcode/mips.h: Update comment for MIPS32 CODE20 operand.
generated by cgit v1.1 at 2024-11-21 16:08:52 +0000