aboutsummaryrefslogtreecommitdiff
path: root/bfd/config.bfd
AgeCommit message (Collapse)AuthorFilesLines
2024-01-29Remove support for the beos file formatNick Clifton1-1/+1
2024-01-08Add support for the aarch64-gnu target (GNU/Hurd on AArch64)Sergey Bugaev1-1/+1
Also recognized are aarch64-*-gnu tagrets, e.g. aarch64-pc-gnu or aarch64-unknown-gnu. The ld/emulparams/aarch64gnu.sh file is (for now) identical to aarch64fbsd.sh, or to aarch64linux.sh with Linux-specific logic removed; and mainly different from the generic aarch64elf.sh in that it does not set EMBEDDED=yes. Coupled with a corresponding GCC patch, this produces a toolchain that can sucessfully build working binaries targeting aarch64-gnu. Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
2024-01-04Update year range in copyright notice of binutils filesAlan Modra1-1/+1
Adds two new external authors to etc/update-copyright.py to cover bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then updates copyright messages as follows: 1) Update cgen/utils.scm emitted copyrights. 2) Run "etc/update-copyright.py --this-year" with an extra external author I haven't committed, 'Kalray SA.', to cover gas testsuite files (which should have their copyright message removed). 3) Build with --enable-maintainer-mode --enable-cgen-maint=yes. 4) Check out */po/*.pot which we don't update frequently.
2023-12-05Add basic support for RISC-V 64-bit EFI objectsAndreas Schwab1-4/+4
This adds a new PEI target pei-riscv64-little. Only objdump and objcopy are supported. bfd: * .gitignore: Add pe-riscv64igen.c. * Makefile.am (BFD64_BACKENDS): Add pei-riscv64.lo, pe-riscv64igen.lo. (BFD64_BACKENDS_CFILES): Add pei-riscv64.c. (BUILD_CFILES): Add pe-riscv64igen.c. (pe-riscv64igen.c): New rule. * Makefile.in: Regenerate. * bfd.c (bfd_get_sign_extend_vma): Add pei-riscv64-little. * coff-riscv64.c: New file. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags) (coff_write_object_contents): Add riscv64 (riscv64_pei_vec) support. * config.bfd (targ_selvecs): Add riscv64_pei_vec to all riscv* targets. * configure.ac: Handle riscv64_pei_vec. * configure: Regenerate. * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE) (GET_OPTHDR_SIZE_OF_STACK_RESERVE) (PUT_OPTHDR_SIZE_OF_STACK_RESERVE) (GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT) (GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE) (GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT) (GET_PDATA_ENTRY, _bfd_XX_bfd_copy_private_bfd_data_common) (_bfd_XX_bfd_copy_private_section_data) (_bfd_XX_get_symbol_info, _bfd_XX_only_swap_filehdr_out) (_bfd_XX_print_private_bfd_data_common) (_bfd_XXi_final_link_postscript, _bfd_XXi_only_swap_filehdr_out) (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out) (_bfd_XXi_swap_aux_in, _bfd_XXi_swap_aux_out) (_bfd_XXi_swap_lineno_in, _bfd_XXi_swap_lineno_out) (_bfd_XXi_swap_scnhdr_out, _bfd_XXi_swap_sym_in) (_bfd_XXi_swap_sym_out, _bfd_XXi_swap_debugdir_in) (_bfd_XXi_swap_debugdir_out, _bfd_XXi_write_codeview_record) (_bfd_XXi_slurp_codeview_record) [COFF_WITH_peRiscV64]: Define. (_bfd_peRiscV64_print_ce_compressed_pdata): Declare. * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out) (_bfd_XXi_swap_scnhdr_out, pe_print_pdata) (_bfd_XX_print_private_bfd_data_common) (_bfd_XX_bfd_copy_private_section_data) (_bfd_XXi_final_link_postscript): Support COFF_WITH_peRiscV64. * pei-riscv64.c: New file. * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd) (pe_ILF_object_p): Support COFF_WITH_peRiscV64. (jtab): Add dummy entry that traps. * targets.c (_bfd_target_vector): Add riscv64_pei_vec. binutils: * testsuite/binutils-all/riscv/pei-riscv64.d: New. * testsuite/binutils-all/riscv/pei-riscv64.s: New. include: * coff/riscv64.h: New file. * coff/pe.h (IMAGE_FILE_MACHINE_RISCV32) (IMAGE_FILE_MACHINE_RISCV64): Define.
2023-11-30MIPS: Set r6 as default arch if vendor is imgYunQiang Su1-1/+1
This behavior is used by downstream toolchain since 2014, and has been in GCC since the same year. We don't support mips64*-img* due to GCC doesn't support it, and we believe that the multilib should be used for this case.
2023-09-25Revert "arc: Add new ARCv3 ISA to BFD."Claudiu Zissulescu1-17/+3
This reverts commit 06e8d9861d16c5b7e6920ad0e89889ccf45c575a.
2023-09-25arc: Add new ARCv3 ISA to BFD.Claudiu Zissulescu1-3/+17
The new Synopsys's ARCv3 ISA is capable to run either 64-bit or 32-bit ISA. The new 32-bit ISA is not compatible with the old Synopsys ARCv1/ARCv2 ISA, however, it retains a lot of common concepts. Thus, this patch is reusing the old ARC BFD backend and adds the necessary bits for the new architecture in a similar way as it is done for RISCV backend. bfd/ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com> Cupertino Miranda <cupertinomiranda@gmail.com> * bfd/Makefile.am: Add ARC64 files. * bfd/Makefile.in: Regerate. * bfd/arc-got.h (TCB_SIZE): Depends on the target architecture. (GOT_ENTRY_SIZE): New define. (write_in_got): Likewise. (read_from_got): Likewise. (align_power): Likewise. (arc_got_entry_type_for_reloc): Use RELA_SIZE and GOT_ENTRY_SIZE. (arc_fill_got_info_for_reloc): Update formating. (relocate_fix_got_relocs_for_got_info): Likewise. (arc_static_sym_data): Deleted structure. (get_static_sym_data): Deleted function. (relocate_fix_got_relocs_for_got_info): Use symbol static data. (create_got_dynrelocs_for_single_entry): Update formating. (create_got_dynrelocs_for_got_info): Likewise. * bfd/arc-plt.c: New file. * bfd/arc-plt.def: Add ARC64 PLT entry. * bfd/arc-plt.h: Clean it up, move functionality to arc-plt.c file. * bfd/archures.c: Add ARC64 target. * bfd/config.bfd: Likewise. * bfd/configure.ac: Likewise. * bfd/bfd-in2.h: Regenerate. * bfd/configure: Likewise. * bfd/libbfd.h: Likewise. * bfd/cpu-arc.c: Clean it up. * bfd/cpu-arc64.c: New file. * bfd/elf32-arc.c: Renamed to elfnn-arc.c. * bfd/elfnn-arc.c: New file. * bfd/reloc.c: Add new ARC64 relocs. * bfd/targets.c: Add ARC64 target. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
2023-08-30Revert "MIPS: Use 64-bit a ABI by default for `mipsisa64*-*-linux*' targets"Maciej W. Rozycki1-4/+4
This reverts commit 025e84f93566c8ced594ef48ddee1dec7e5b4cdd. It was applied unapproved.
2023-08-27MIPS: Use 64-bit a ABI by default for `mipsisa64*-*-linux*' targetsYunQiang Su1-4/+4
Following the arrangement in GCC select a 64-bit ABI by default, either n32 or n64, rather than o32 for `mipsisa64*-*-linux*' targets, just as with the corresponding `mips64*-*-linux*' targets.
2023-08-24kvx: bfd/config.bfd & ld/configure.tgtPaul Iannetta1-1/+1
bfd/ * config.bfd: Remove kvx_elf64_vec from targ_selvecs as it is already in targ_defvec. ld/ * configure.tgt: Split long line.
2023-08-23kvx: fix 32-bit buildPaul Iannetta1-5/+4
bfd/ * Makefile.am: Move elf32-kvx.lo from BFD32_BACKENDS to BFD64_BACKENDS. Remove elfxx-kvx.lo from BFD32_BACKENDS. Remove elfxx-kvx.c from BFD32_BACKENDS_CFILES. * Makefile.in: Regenerate. * config.bfd: Adjust targ_defvec and targ_selvecs and gate them behind BFD64. * configure.ac: Add target_size=64 to kvx_elf64_*vec. * configure: Regenerate. * elfnn-kvx.c (elfNN_kvx_stub_name): Cast rel->r_addend to uint64_t to match format string. (elfNN_kvx_relocate_section): Similarly for r_offset, and use PRIx64 in format string. * targets.c (_bfd_target_vector <kvx_elf32_vec>): Move inside #ifdef BFD64. ld/ * Makefile.am: Move eelf32kvx.c from ALL_EMULATION_SOURCES to ALL_64_EMULATION_SOURCES. * Makefile.in: Regenerate.
2023-08-22kvx-linux configAlan Modra1-1/+1
A misplaced line, resulting in testsuite errors when attempting to use as -m32. * config.bfd (kvx-*-linux*): Add targ_selvecs. (kvx-*-*): Remove targ_selvecs.
2023-08-16kvx: New port.Paul Iannetta1-0/+16
2023-08-02Revert "2.41 Release sources"Sam James1-12/+10
This reverts commit 675b9d612cc59446e84e2c6d89b45500cb603a8d. See https://sourceware.org/pipermail/binutils/2023-August/128761.html.
2023-08-022.41 Release sourcesbinutils-2_41-releaseNick Clifton1-10/+12
2023-07-28MIPS: Support `-gnuabi64' target triplet suffix for 64-bit Linux targetsYunQiang Su1-0/+10
Make the n64 ABI the default for 64-bit Linux targets specified with `-gnuabi64' suffix included in the target triplet, for configurations such as the Debian mips64el and mips64r6el ports. Adjust testsuite configuration accordingly. There are the following regressions with the new target triplet: mips64-linux-gnuabi64 +FAIL: readelf -S bintest mips64-linux-gnuabi64 +FAIL: MIPS reloc estimation 1 mips64el-linux-gnuabi64 +FAIL: readelf -S bintest mips64el-linux-gnuabi64 +FAIL: MIPS reloc estimation 1 The `readelf' issue comes from a difference in section headers produced that the `binutils/testsuite/binutils-all/readelf.s-64' pattern template does not match. While there has been a precedent it does not appear to me that there is a clear advantage from adding more and more variations to the template rather than forking the existing template into multiple ones for a more exact match. So this is best deferred to a separate discussion. The MIPS reloc estimation issue is an actual bug in `objdump', which discards a number of trailing entries from output here for n64 composed relocations: DYNAMIC RELOCATION RECORDS OFFSET TYPE VALUE 0000000000000000 R_MIPS_NONE *ABS* 0000000000000000 R_MIPS_NONE *ABS* and consequently `ld/testsuite/ld-mips-elf/reloc-estimate-1.d' does not match even though ELF output produced is correct according to `readelf': Relocation section '.rel.dyn' at offset 0x10400 contains 2 entries: Offset Info Type Sym. Value Sym. Name 000000000000 000000000000 R_MIPS_NONE Type2: R_MIPS_NONE Type3: R_MIPS_NONE 000000010000 000300001203 R_MIPS_REL32 0000000000010010 foo@@V2 Type2: R_MIPS_64 Type3: R_MIPS_NONE As a genuine bug this has to be handled separately. Co-Authored by: Maciej W. Rozycki <macro@orcam.me.uk> bfd/ * config.bfd: Add `mips64*el-*-linux*-gnuabi64' and `mips64*-*-linux*-gnuabi64' targets. binutils/ * testsuite/binutils-all/mips/mips.exp: Handle `*-*-*-gnuabi64' targets. * testsuite/binutils-all/objcopy.exp: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/binutils-all/remove-relocs-01.d: Likewise. * testsuite/binutils-all/remove-relocs-04.d: Likewise. * testsuite/binutils-all/remove-relocs-05.d: Likewise. * testsuite/binutils-all/remove-relocs-06.d: Likewise. gas/ * configure.ac: Handle `mips64*-linux-gnuabi64' targets. * configure: Regenerate. * testsuite/gas/mips/compact-eh-eb-7.d: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/gas/mips/compact-eh-el-7.d: Likewise. ld/ * configure.tgt: Add `mips64*el-*-linux-gnuabi64' and `mips64*-*-linux-gnuabi64' targets. * testsuite/ld-undefined/undefined.exp: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/ld-mips-elf/attr-gnu-4-10.d: Likewise. * testsuite/ld-mips-elf/compact-eh6.d: Likewise. * testsuite/ld-mips-elf/mips-elf.exp: Handle `*-*-*-gnuabi64' targets.
2023-07-28Revert "MIPS: support mips*64 as CPU and gnuabi64 as ABI"Maciej W. Rozycki1-12/+2
This reverts commit 32f1c80375ebe8ad25d9805ee5889f0006c51e59. It had two unrelated changes lumped together, one of which changed the meaning of the `mipsisa64*-*-linux*' target triplets, which was not properly evaluated.
2023-07-14AIX_WEAK_SUPPORTAlan Modra1-12/+10
Making target code depend on a host define like _AIX52 is never correct, so out it goes. Also, sort some config.bfd entries a little to make it more obvious there is a config difference between aix5.1 and aix5.2. These two changes should make no difference to anything in binutils. The gas define of AIX_WEAK_SUPPORT on the other hand was wrong, so fix that. Finally, fix some testsuite fails on aix < 5.2 by simply not running the tests. include/ * coff/internal.h (C_WEAKEXT): Don't depend on _AIX52. bfd/ * coffcode.h (coff_slurp_symbol_table): Don't depend on _AIX52. (coff_classify_symbol): Likewise. * config.bfd: Sort some entries. gas/ * configure.ac (AIX_WEAK_SUPPORT): Don't set for aix5.[01]. * configure: Regenerate. * testsuite/gas/ppc/aix.exp (xcoff-visibility-1*) Don't run for aix < 5.2.
2023-06-15Revert "MIPS: default r6 if vendor is img"Maciej W. Rozycki1-1/+1
This reverts commit be0d391f22fe6009c3be907753975a984cbbcc23. It was applied unapproved.
2023-06-05MIPS: default r6 if vendor is imgYunQiang Su1-1/+1
This behavior is used by downstream toolchain since 2014. We also set the default ABI for mips*-img-elf to O32. The previous value is NO_ABI, which is not good default ABI. We don't support mips64*-img* due to GCC doesn't support it, and We believe that the multilib should be used for this case.
2023-05-04MIPS: revert "default r6 if vendor is img"YunQiang Su1-1/+1
In commit: 9171de358f230b64646bbb525a74e5f8e3dbe0dc, The default output is set to r6 if the vendor is img, It is ugly and should not be in upstream. Let's revert it.
2023-04-23MIPS: default output r6 obj if the triple is r6YunQiang Su1-0/+6
If the triple is mipsisa32r6* or mipsisa64r6*, ld/as should output r6 objects by default. The triples with vendor `img` should do same. The examples include: as xx.s -o xx.o ld -r -b binary xx.dat -o xx.o
2023-04-23MIPS: support mips*64 as CPU and gnuabi64 as ABIYunQiang Su1-2/+12
For MIPS64r6 ports, Debian as an example, `mipsisa64r6el` is used as the cpu name in triple. Let's recognize them by `mips*64*(el)`. For 64bit Ports, like Debian's mips64el and mips64r6el ports, `gnuabi64` is used as the abi section. Let's use N64 abi by default for the triple with gnuabi64.
2023-03-16configure: add new target aarch64-*-nto*Clément Chigot1-1/+1
This target has its own ld emulation based on aarch64elf.em.
2023-01-10Add aarch64-w64-mingw32 targetMark Harmstone1-2/+2
This adds a mingw target for aarch64, including windres and dlltool. Note that the old value of jmp_aarch64_bytes was wrong, and this does the same thing as MSVC does.
2023-01-10Add pe-aarch64 relocationsMark Harmstone1-6/+0
This adds the remaining pe-aarch64 relocations, and gets them working. It also brings in the constant directives from ELF, as otherwise .word would be 2 rather than 4 bytes, and .xword and .dword wouldn't be defined.
2023-01-02obsolete target tidyAlan Modra1-8/+1
Delete a few files only used for obsolete targets, and tidy config, xfails and other pieces of support specific to those targets. And since I was editing target triplets in test files, fix the nm alpha-linuxecoff fails.
2023-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
2022-12-26Add support for x86_64-*-gnu-* targets to build x86_64 gnumach/hurdFlavio Cruz1-0/+5
2022-10-20Obsolete beosAlan Modra1-1/+2
* config.bfd: Obsolete *-*-beos*. Simplify x86 beos match.
2022-10-19aarch64-pe support for LD, GAS and BFDJedidiah Thompson1-2/+14
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE. Based on initial work by Jedidiah Thompson Co-authored-by: Jedidiah Thompson <wej22007@outlook.com> Co-authored-by: Zac Walker <zac.walker@linaro.org>
2022-09-13Add pdb archive formatMark Harmstone1-2/+2
Resubmitted with changes in https://sourceware.org/pipermail/binutils/2022-September/122791.html made.
2022-09-02Add OpenBSD ARM Little Endian BFD support.Frederic Cambus1-2/+1
* config.bfd (arm-*-openbsd*): Restore target.
2022-08-22Add OpenBSD AArch64 Little Endian BFD support.Frederic Cambus1-0/+5
* config.bfd (aarch64-*-openbsd*): Add target.
2022-08-10bfd: Add support for LoongArch64 EFI (efi-*-loongarch64).Youling Tang1-1/+1
This adds support for efi-loongarch64 by virtue of adding a new PEI target pei-loongarch64. This is not a full target and only exists to support EFI at this time. This means that this target does not support relocation processing and is mostly a container format. This format has been added to elf based loongarch64 targets such that efi images can be made natively on Linux. However this target is not valid for use with gas but only with objcopy. We should't limit addresses to 32-bits for 64-bit vma, otherwise there will be "RVA truncated" error when using objcopy on loongarch64. With these changes the resulting file is recognized as an efi image. Any magic number is based on the Microsoft PE specification [1]. The test results are as follows: $ make check-binutils RUNTESTFLAGS='loongarch64.exp' PASS: Check if efi app format is recognized $ objdump -h -f tmpdir/loongarch64copy.o tmpdir/loongarch64copy.o: file format pei-loongarch64 architecture: Loongarch64, flags 0x00000132: EXEC_P, HAS_SYMS, HAS_LOCALS, D_PAGED start address 0x0000000000000000 Sections: Idx Name Size VMA LMA File off Algn 0 .text 0000003c 00000000200000b0 00000000200000b0 00000200 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format bfd: * .gitignore (pe-loongarch64igen.c): New. * Makefile.am (pei-loongarch64.lo, pe-loongarch64igen.lo, pei-loongarch64.c, pe-loongarch64igen.c): Add support. * Makefile.in: Likewise. * bfd.c (bfd_get_sign_extend_vma): Add pei-loongarch64. * coff-loongarch64.c: New file. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags, coff_write_object_contents) Add loongarch64 (loongarch64_pei_vec) support. * config.bfd: Likewise. * configure: Likewise. * configure.ac: Likewise. * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE, GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE, GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT, GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE, GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT, GET_PDATA_ENTRY, _bfd_peLoongArch64_bfd_copy_private_bfd_data_common, _bfd_peLoongArch64_bfd_copy_private_section_data, _bfd_peLoongArch64_get_symbol_info, _bfd_peLoongArch64_only_swap_filehdr_out, _bfd_peLoongArch64_print_private_bfd_data_common, _bfd_peLoongArch64i_final_link_postscript, _bfd_peLoongArch64i_only_swap_filehdr_out, _bfd_peLoongArch64i_swap_aouthdr_in, _bfd_peLoongArch64i_swap_aouthdr_out, _bfd_peLoongArch64i_swap_aux_in, _bfd_peLoongArch64i_swap_aux_out, _bfd_peLoongArch64i_swap_lineno_in, _bfd_peLoongArch64i_swap_lineno_out, _bfd_peLoongArch64i_swap_scnhdr_out, _bfd_peLoongArch64i_swap_sym_in, _bfd_peLoongArch64i_swap_sym_out, _bfd_peLoongArch64i_swap_debugdir_in, _bfd_peLoongArch64i_swap_debugdir_out, _bfd_peLoongArch64i_write_codeview_record, _bfd_peLoongArch64i_slurp_codeview_record, _bfd_peLoongArch64_print_ce_compressed_pdata): New. * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out, _bfd_XXi_swap_scnhdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common, _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript): Support COFF_WITH_peLoongArch64, * pei-loongarch64.c: New file. * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p): Support COFF_WITH_peLoongArch64. (jtab): Add dummy entry that traps. * targets.c (loongarch64_pei_vec): New. binutils * testsuite/binutils-all/loongarch64/loongarch64.exp: New file. * testsuite/binutils-all/loongarch64/pei-loongarch64.d: New test. * testsuite/binutils-all/loongarch64/pei-loongarch64.s: New test. include * coff/loongarch64.h: New file. * coff/pe.h (IMAGE_FILE_MACHINE_LOONGARCH64): New. Signed-off-by: Youling Tang <tangyouling@loongson.cn>
2022-06-27bfd: prune config.bfd's setting of targ_archsJan Beulich1-5/+1
The final "match all" case can take care of a few explicit entries: Purge those. Also move s12z* into proper position (the table is otherwise sorted, after all).
2022-06-27drop XC16x bitsJan Beulich1-4/+0
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved the architecture from the "obsolete but still available" to the "obsolete / support removed" list in config.bfd, making the architecture impossible to enable (except maybe via "enable everything" options"). Note that I didn't touch */po/*.po{,t} on the assumption that these would be updated by some (half)automatic means.
2022-05-05cris bfd configAlan Modra1-2/+0
cris support will be built into a 32-bit bfd if using --enable-targets=all on a 32-bit host, so we may as well make targmatch.h include cris. * config.bfd (cris): Remove #idef BFD64.
2022-04-13binutils: enable PE on 32bit haiku buildAlexander von Gluck IV1-0/+1
* config.bfd (x86-haiku): Add i386_pei_vec as a selectable format.
2022-03-31x86: Remove bfd_arch_l1om and bfd_arch_k1omH.J. Lu1-28/+14
Remove bfd_arch_l1om and bfd_arch_k1om since L1OM/K1OM support has been removed from gas, ld and opcodes. bfd/ * Makefile.am (ALL_MACHINES): Remove cpu-l1om.lo and cpu-k1om.lo. (ALL_MACHINES_CFILES): Remove cpu-l1om.c and cpu-k1om.c. * archures.c (bfd_mach_l1om): Removed. (bfd_mach_l1om_intel_syntax): Likewise. (bfd_mach_k1om): Likewise. (bfd_mach_k1om_intel_syntax): Likewise. (bfd_k1om_arch): Likewise. (bfd_l1om_arch): Likewise. (bfd_archures_list): Remove bfd_k1om_arch and bfd_l1om_arch references. * config.bfd (targ_selvecs): Remove l1om_elf64_vec. l1om_elf64_fbsd_vec, k1om_elf64_vec and k1om_elf64_fbsd_vec. (targ_archs): Remove bfd_l1om_arch and bfd_k1om_arch. * configure.ac (k1om_elf64_vec): Removed. (k1om_elf64_fbsd_vec): Likewise. (l1om_elf64_vec): Likewise. (l1om_elf64_fbsd_vec): Likewise. * cpu-k1om.c: Removed. * cpu-l1om.c: Likewise. * elf64-x86-64.c (elf64_l1om_elf_object_p): Removed. (elf64_k1om_elf_object_p): Likewise. (l1om_elf64_vec): Removed. (l1om_elf64_fbsd_vec): Likewise. (k1om_elf64_vec): Likewise. (k1om_elf64_fbsd_vec): Likewise. (ELF_TARGET_OS): Undefine. * targets.c (_bfd_target_vector): Remove k1om_elf64_vec, k1om_elf64_fbsd_vec, l1om_elf64_vec and l1om_elf64_fbsd_vec. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * configure: Likewise. opcodes/ * configure.ac: Remove bfd_arch_l1om/bfd_arch_k1om references. * disassemble.c (disassembler): Likewise. * configure: Regenerate.
2022-03-16bfd: add AMDGCN architectureSimon Marchi1-0/+5
Add support for the AMDGCN architecture to BFD. This is the bare minimum to get $ ./configure --target=amdgcn-hsa-amdhsa --disable-gas $ make all-binutils working later in this series. The specific AMDGCN models added here are a bit arbitrary, based on what we intend to initially support in GDB. This list will need to be updated in the future anyway. The complete up-to-date list of existing AMDGPU models can be found here: https://llvm.org/docs/AMDGPUUsage.html#processors The ELF format for this architecture is documented here: https://llvm.org/docs/AMDGPUUsage.html#elf-code-object The flags for the "HSA" OS ABI are properly versioned and documented on that page. But the NONE, PAL and MESA3D OS ABIs are not well documented nor versioned. Taking a peek at the LLVM source code, we see that they encode their flags the same way as HSA v3. For example, for PAL: https://github.com/llvm/llvm-project/blob/c8b614cd74a92d85936aed5ac7c642af75ffdc29/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp#L601 So at least, we know that all AMDGPU objects (of which AMDGCN objects are a subset of) at the time of writing encode the specific GPU model in the EF_AMDGPU_MACH field of e_flags. bfd/ChangeLog: * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add cpu-amdgcn.c. (BFD64_BACKENDS): Add elf64-amdgcn.lo. (BFD64_BACKENDS_CFILES): Add elf64-amdgcn.c. * Makefile.in: Re-generate. * cpu-amdgcn.c: New. * elf64-amdgcn.c: New. * archures.c (bfd_architecture): Add bfd_arch_amdgcn and related mach defines. (bfd_amdgcn_arch): New. (bfd_archures_list): Add bfd_amdgcn_arch. * bfd-in2.h: Re-generate. * config.bfd: Handle amdgcn* target. * configure.ac: Handle amdgcn_elf64_le_vec. * configure: Re-generate. * elf-bfd.h (elf_target_id): Add AMDGCN_ELF_DATA. * targets.c (amdgcn_elf64_le_vec): New. (_bfd_target_vector): Add amdgcn_elf64_le_vec. include/ChangeLog: * elf/amdgpu.h: New. * elf/common.h (ELFOSABI_AMDGPU_HSA): Add. Change-Id: I969f7b14960797e88891c308749a6e341eece5b2
2022-02-28Clarify the wording of the error message when an obsolete configuration is ↵Nick Clifton1-2/+2
encountered. PR 28886 * config.bfd: Update error message for obsolete configurations.
2022-02-09Update the obsolete list and how-to-make-a-release documentation now that ↵Nick Clifton1-3/+3
the 2.38 release is out.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-12-21Obsolete m32c-rtems and m32r-rtemsJoel Sherrill1-1/+1
2020-12-20 Joel Sherrill <joel@rtems.org> bfd/ * config.bfd (m32c-*-rtems*): Remove target. ld/ * configure.tgt (m32c-*-rtems*): Remove target. * configure.tgt (m32r-*-rtems*): Remove target.
2021-12-19Obsolete m32c-rtemsAlan Modra1-0/+1
2021-12-15loongarch32 build failure on 32-bit hostAlan Modra1-1/+1
gas/config/tc-loongarch.c: In function ‘assember_macro_helper’: gas/config/tc-loongarch.c:915:28: error: right shift count >= width of type [-Werror=shift-count-overflow] 915 | hi32 = insn->args[1] >> 32; | ^~ One possible fix is to make offsetT a 64-bit type for loongarch32. This also makes bfd/targmatch.h (generated from bfd/config.bfd) consistent since the loongarch32 match is inside #ifdef BFD64. * config.bfd (loongarch32-*): Set want64.
2021-11-23AArch64: Add support for AArch64 EFI (efi-*-aarch64).Tamar Christina1-2/+2
This adds support for efi-*-aarch64 by virtue of adding a new PEI target pei-aarch64-little. This is not a full target and only exists to support EFI at this time. This means that this target does not support relocation processing and is mostly a container format. This format has been added to elf based aarch64 targets such that efi images can be made natively on Linux. However this target is not valid for use with gas but only with objcopy. With these changes the resulting file is recognized as an efi image by third party tools: > pecli info hello.efi Metadata ================================================================================ MD5: 598c32a778b0f0deebe977fef8578c4e SHA1: 4580121edd5cb4dc40f51b28f171fd15250df84c SHA256: 3154bd7cf42433d1c957f6bf55a17ad8c57ed41b29df2d485703349fd6ff1d5c Imphash: Size: 47561 bytes Type: PE32+ executable (EFI application) (stripped to external PDB), for MS Windows Compile Time: 1970-01-01 00:00:00 (UTC - 0x0 ) Entry point: 0x2000 (section .text) Sections ================================================================================ Name RWX VirtSize VirtAddr RawAddr RawSize Entropy md5 .text R-X 0x5bb0 0x2000 0x400 0x5c00 6.39 551fbc264256a3f387de8a891500ae0d .reloc R-- 0xc 0x8000 0x6000 0x200 0.02 0c45f6d812d079821c1d54c09ab89e1d .data RW- 0x1d88 0x9000 0x6200 0x1e00 4.18 5d1137c09f01289dc62bf754f7290db3 .dynamic RW- 0xf0 0xb000 0x8000 0x200 0.34 5c94ed3206f05a277e6f04fbf131f131 .rela R-- 0xe58 0xc000 0x8200 0x1000 1.87 8b5c6bc30f3acb7ca7bf2e6789d68519 .dynsym R-- 0x138 0xd000 0x9200 0x200 0.96 bdcf5101da51aadc663ca8859f88138c Imports ================================================================================ Any magic number is based on the Microsoft PE specification [1]. [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format bfd/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * .gitignore (pe-aarch64igen.c): New. * Makefile.am (pei-aarch64.lo, pe-aarch64igen.lo, pei-aarch64.c, pe-aarch64igen.c): Add support. * Makefile.in: Likewise. * bfd.c (bfd_get_sign_extend_vma): Add pei-aarch64-little. * coff-aarch64.c: New file. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags, coff_write_object_contents) Add aarch64 (aarch64_pei_vec) support. * config.bfd: Likewise. * configure: Likewise. * configure.ac: Likewise. * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE, GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE, GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT, GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE, GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT, GET_PDATA_ENTRY, _bfd_peAArch64_bfd_copy_private_bfd_data_common, _bfd_peAArch64_bfd_copy_private_section_data, _bfd_peAArch64_get_symbol_info, _bfd_peAArch64_only_swap_filehdr_out, _bfd_peAArch64_print_private_bfd_data_common, _bfd_peAArch64i_final_link_postscript, _bfd_peAArch64i_only_swap_filehdr_out, _bfd_peAArch64i_swap_aouthdr_in, _bfd_peAArch64i_swap_aouthdr_out, _bfd_peAArch64i_swap_aux_in, _bfd_peAArch64i_swap_aux_out, _bfd_peAArch64i_swap_lineno_in, _bfd_peAArch64i_swap_lineno_out, _bfd_peAArch64i_swap_scnhdr_out, _bfd_peAArch64i_swap_sym_in, _bfd_peAArch64i_swap_sym_out, _bfd_peAArch64i_swap_debugdir_in, _bfd_peAArch64i_swap_debugdir_out, _bfd_peAArch64i_write_codeview_record, _bfd_peAArch64i_slurp_codeview_record, _bfd_peAArch64_print_ce_compressed_pdata): New. * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common, _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript): Support COFF_WITH_peAArch64, * pei-aarch64.c: New file. * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p): Support COFF_WITH_peAArch64. (jtab): Add dummy entry that traps. * targets.c (aarch64_pei_vec): New. binutils/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * NEWS: Add new support. * objcopy.c (convert_efi_target): Add efi-*-aarch64 support. * testsuite/binutils-all/aarch64/pei-aarch64-little.d: New test. * testsuite/binutils-all/aarch64/pei-aarch64-little.s: New test. include/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * coff/aarch64.h: New file. * coff/pe.h (IMAGE_FILE_MACHINE_ARM64): New.
2021-10-24LoongArch bfd supportliuzhensong1-0/+15
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn> Zhensong Liu <liuzhensong@loongson.cn> Weinan Liu <liuweinan@loongson.cn> bfd/ * Makefile.am: Add LoongArch. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-loongarch.c: New. * elf-bfd.h: Add LoongArch. * elf.c: Add LoongArch elfcore_grok_xxx. * elfnn-loongarch.c: New. * elfxx-loongarch.c: New. * elfxx-loongarch.h: New. * reloc.c: Add LoongArch BFD RELOC ENUM. * targets.c: Add LoongArch target. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/BLD-POTFILES.in: Regenerate. * po/SRC-POTFILES.in: Regenerate. include/ * elf/common.h: Add NT_LARCH_{CPUCFG,CSR,LSX,LASX}. * elf/loongarch.h: New.
2021-09-13Re: Deprecate a.out support for NetBSD targetsAlan Modra1-1/+2
* config.bfd: Correct m68-*-*bsd* obsolete target match.
generated by cgit v1.1 at 2024-08-12 07:18:46 +0000