If coldboot HART is assigned to a domain then we should use coldboot
HART as the boot HART of the domain. This allows coldboot HART to
continue boot sequence even when it is assigned to some non-root domain.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

We should use lower bits for domain memory region access permissions
and higher bits for other domain memory region attributes. This helps
us use same bit assignment for parsing domain memory region access
permissions from device tree.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

The sbi_domain_finalize() should auto start a domain only if the
boot HART is withing limits (i.e. less than SBI_HARTMASK_MAX_BITS).

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

The domain_count check in sbi_domain_finalize() for newly discovered
domain is incorrect and should be reversed.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

There has been typo in automatic domain boot hart startup
for non-root domains so this patch fixes it.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

We should check and access N-extension CSRs in sbi_hart_switch_mode()
when next_mode is u-mode because N-extension is optional.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

On RV32 systems, we have two CSRs for M-mode status (MSTATUS and
MSTATUSH) when H-extension is implemented. This means we have to
save/restore MSTATUSH for RV32 systems only when H-extension is
implemented. The current _trap_handler() has extra instructions
(roughly 10) for conditional save/restore of MSTATUSH CSR.

These extra instructions in RV32 _trap_handler() can be avoided
if we create separate low-level trap handler for RV32 systems
having H-extension. This patch optimizes low-level trap handler
for RV32 systems accordingly.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

The SBI SRST extension has been accepted and merged in the latest
SBI v0.3-draft specification.
(Refer, https://github.com/riscv/riscv-sbi-doc

)

It allows to S-mode software to request system shutdown, cold reboot,
and warm reboot.

This patch implements SBI SRST extension as a replacement of the
legacy sbi_shutdown() call of SBI v0.1 specification.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

To implement the SBI SRST extension, we need two platform operations
for system reset:
1) system_reset_check() - This operation will check whether given
   reset type and reason are supported by the platform
2) system_reset() - This operation will do the actual platform
   system reset and it will not return if reset type and reason
   are supported by the platform

This patch updates system reset related code everywhere as-per above.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

Few platforms have dummy system reset functions so let's remove
these dummy system reset functions to allow generic code deal
with it in the right way.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

We can now use the standard SBI SRST extension reset types instead
of the opensbi specific (SBI_PLATFORM_RESET_xyz) reset types hence
remove related opensbi specific defines. The "platform_" prefix of
the reset type parameter of sbi_system_reset() function should also
be removed.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

We extend the SBI ecall interface header for the SBI SRST extension
recently accepted in SBI specification v0.3-draft.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

fix a typo error in docs/platform/sifive_fu540.md

Signed-off-by: Yuan Li <dskwelmcy@163.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

Currently, we have all boot prints at the end of cold boot sequence
which means if there is any failure in cold boot sequence before
boot prints then we don't get any print.

This patch improves boot prints in cold boot sequence as follows:
1. We divide the boot prints into multiple parts and print it
   from different locations after sbi_console_init()
2. We throw an error print if there is any failure in cold boot
   sequence after sbi_console_init()

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

When PLATFORM_RISCV_ABI and PLATFORM_RISCV_ISA are not specified,
we force "-mabi=lp64 -march=rv64gc" for RV64 and force "-mabi=ilp32
-march=rv32gc" for RV32. This can prevent users from using the
toolchain default "-mabi" and "-march" options.

To allow using toolchain defaults, we add compile-time option
PLATFORM_RISCV_TOOLCHAIN_DEFAULT which when enabled forces the
top-level makefile to use toolchain default ABI and ISA string.

To enable the option, pass "PLATFORM_RISCV_TOOLCHAIN_DEFAULT=1"
to top-level make.

Reported-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

We know about pmp granularity and number of bits supported by PMP.
Show those information in the boot time info print

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

As per RISC-V privilege specification, a platform may choose to implement
a coarser granularity scheme for PMP addresses. In that case, we shouldn't
allow any pmp region size smaller than the platform supports. A platform
may not also implement all the bits for a PMP address specified in the priv
specification.

The pmp range granularity and address bits should be detected dynamically
before detecing PMP regions. Any pmp modification request beyond these detected
value must not succeed.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

The "reg" property in a device node may not be the correct address always.
If a parent node defines a "ranges" property, the child address need to be
translated with respect to parents address. If the ranges property is not
present, it will just use 1:1 translation.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

We add initial documentation for OpenSBI domain support to help
RISC-V platform vendors achieve system-level partitioning.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

We extend boot prints to display details of each domain. In the
process, we remove sbi_hart_pmp_dump() because it shows redundant
information which domain details already show.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

The PMP configuration on each HART should be only based on the memory
regions of the assigned domain because each domain includes a memory
region to protect the underlying firmware.

This patch updates the sbi_hart_pmp_configure() function accordingly.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

The sbi_hart_pmp_get() and sbi_hart_pmp_check_addr() functions
are not used anymore hence this patch removes these functions.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

The fdt_cpu_fixup() should disable a HART in DT if the HART
is not assigned to the current HART domain. This patch updates
fdt_cpu_fixup() accordingly.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

Now that each HART is mapped to a domain having a set of memory
regions, we update fdt_reserved_memory_fixup() to use domain memory
regions for adding reserved memory nodes in device tree.

We also change reserved memory node name prefix from "mmode_pmp"
to "mmode_resv" because domain memory regions can impact other
hardware configurations (such as IOPMP, etc) along with PMP.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

The sbi_system_reset() should issue platform system reset only if
domain of current HART is allowed to do system reset.

This patch extends sbi_system_reset() as-per above.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

Instead of calling sbi_hsm_hart_get_state() in a loop, we can simply
call a new inline __sbi_hsm_hart_get_state() which only takes "hartid"
and enforce domain checks using sbi_domain_assigned_hartmask().

This patch optimizes sbi_hsm_hart_started_mask() as-per above.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

The sbi_hsm_hart_start() should consider the domain under which we
are trying to start the HART. This will help ensure that HART A can
start HART B only if both HARTs A and B belong to the same domain.

We also have a special case when we bring-up boot HART of non-root
domains in sbi_domain_finalize() where we should skip domain checks
in sbi_hsm_hart_start(). To achieve this, sbi_hsm_hart_start() should
do domain checks only when domain parameter is non-NULL.

This patch extends sbi_hsm_hart_start() as-per above.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

The sbi_hsm_hart_started_mask() API should take one more parameter
to allow caller specify domain under which started_mask is being
generated. Further, the sbi_hsm_hart_started_mask() depends on
sbi_hsm_hart_get_state() which also should return HART state under
specified domain.

This patch updates both sbi_hsm_hart_started_mask() and
sbi_hsm_hart_get_state() as-per above.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

An OpenSBI domain is a logical entity representing a set of HARTs
and a set of memory regions for these HARTs.

The OpenSBI domains support will allow OpenSBI platforms and previous
booting stage (i.e. U-Boot SPL, Coreboot, etc) to partition a system
into multiple domains where each domain will run it's own software.

For inter-domain isolation, OpenSBI will eventually use various HW
features such as PMP, ePMP, IOPMP, SiFive shield, etc but initial
implementation only use HW PMP support.

This patch provides initial implementation of OpenSBI domains where
we have a root/default domain and OpenSBI platforms can provide
non-root/custom domains using domain_get() callback.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

The sbi_hartmask_test_hart() does not modify hartmask so the
hartmask pointer parameter should be declared const.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

The hartid parameter of sbi_hart_init() is not used anywhere in
sbi_hart_init() implementation so let's remove it.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

We factor-out PMP configuration from sbi_hart_init() as a separate
sbi_hart_pmp_configure() function and do the PMP configuration very
late in coldboot and warmboot path just before platform_final_init().

Eventually, this enable us to configure PMP totally based on OpenSBI
domain where OpenSBI domains can be parsed from device-tree in any of
the platform operations except platform_final_init().

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

The pmp_region_xyz() callbacks are not required in sbi_platform_operations
because we will be using OpenSBI domain memory regions to program the
PMP CSRs.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

The sbi_ecall.h and sbi_trap.h are not required to be included in
sbi_platform.h hence we remove it. This way sources requiring
these headers will have to explicitly include it thereby reducing
implicit includes.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

The Kendryte K210 platform has built-in DTB and does not provides
FW_PAYLOAD_FDT_ADDR. This means the FDT fixups will be done on
the built-in DTB in absence of FW_PAYLOAD_FDT_ADDR. This patch
adds some padding in built-in DTB for FDT fixups.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

We extend d2c.sh to allow padding zeros in output C source when
converting DTB to C source. Using this feature, platforms can
create extra room for in-place FDT fixups on built-in DTBs.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

The FW_PAYLOAD_FDT_PATH compile-time option is replaced by
FW_FDT_PATH compile-time option which is more flexible and
common across all OpenSBI firmwares.

This patch removes FW_PAYLOAD_FDT_PATH and updates related
documentation to use FW_FDT_PATH.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

Currently, only FW_PAYLOAD has mechanism to embed external
FDT using FW_PAYLOAD_FDT_PATH compile-time option.

This patch adds a common FW_FDT_PATH compile-time option to
embed external FDT for all OpenSBI firmwares (i.e FW_JUMP,
FW_PAYLOAD, and FW_DYNAMIC).

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

Currently, the make rules for ELF, BIN and LD script are little
generic to allowing ELF, BIN and LD script to be anywhere in the
build directory. For OpenSBI firmwares, the ELF, BIN, and LD script
are always platform specific so we update make rules accordingly.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>

Add cleaning of compiled device tree files (.dtb files).

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>