On platforms with Smepmp, the previous booting stage must enter
OpenSBI with mseccfg.MML == 0. This allows OpenSBI to configure
it's own M-mode only regions without depending on the previous
booting stage.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

The SBI_ETRAP error code was introduced only for doing trap
redirection in generic sbi_ecall_handler(). Now the trap
redirection is moved into sbi_ecall_legacy.c and SBI_ETRAP
error code is only used in this source file so let us remove
it.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

Some of the upcoming SBI extensions (such as SSE) will directly
update register state so improve the prototype of ecall handler
to accommodate this. Further, this flexibility allows us to
push the trap redirection from sbi_ecall_handler() to the
sbi_ecall_legacy_handler().

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

On platforms with Smepmp, the MMIO regions accessed by M-mode need
to be explicitly marked with M-mode only read/write or shared (both
(M-mode and S-mode) read/write permission.

If the above is not done then runtime PLIC access from M-mode on
platforms with Smepmp will result in access fault when further
results in CPU hotplug not working.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

Let's use SBI_TLB_INFO_SIZE instead of hard-coded 0x40 in
fw_platform_calculate_heap_size() to fine tune the heap size
required for per-hart TLB fifos.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

Let us reduce the size of struct sbi_tlb_info by doing the
following:
1) Change the data type of asid and vmid fields to uint16_t
2) Replace local_fn() function pointer with an enum

Based on the above, the size of struct sbi_tlb_info is reduced
by 16 bytes on RV64 and 4 bytes on RV32.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

Enable access to some extensions through menvcfg and show them in "Boot
HART ISA Extensions" if they are present in the device tree.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Define an array sbi_hart_ext to map extension ID and name , and use it
for ISA parsing and printing out the supported extensions.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Use 1 variable to store the value of menvcfg.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

We can enhance the code by creating 2 unified interface with macro  for
privilege mode and extensions detection, which relies on supported
privilege modes and CSRs.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

The original code has multiple conversions between hartid and
hartindex. Can call sbi_hartmask_set_hartindex directly to
avoid conversion.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

sbi_ipi_event_create() disallows registering an IPI event with a NULL
.process callback, so the function pointer will never be NULL here.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>

An IPI sent to the local hart can be processed directly instead of
triggering the IPI device. This is more efficient, and it avoids a
deadlock when the .sync callback is defined. Since interrupts are
disabled while handling an ecall, the IPI would not get delivered
until the next mret, but sbi_ipi_sync() is called before then.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>

Currently, failures in sbi_ipi_send() are silently ignored, which makes
them difficult to debug. Instead, abort sending the IPI and pass back
the error, but still synchronize any IPIs already sent.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

The tlb_update() callback is called for each destination hart.
Move the size check earlier, so it is executed only once.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Currently, the fdt_parse_aclint_node() follows a fixed order to parse
ACLINT timer. This may cause the undesirable result when the ACLINT
device does not support mtime without adding an empty entry for it in
the DT.

To be robust, make fdt_parse_aclint_node() support "reg-names" property,
so it can parse the DT in an order independent way. For compatibility,
fdt_parse_aclint_node() only use "reg-names" when parsing ACLINT timer,
and will fallback to the old way if "reg-names" property is not found.

Link: https://lore.kernel.org/all/20231114-skedaddle-precinct-66c8897227bb@squawk/


Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup patel <anup@brainfault.org>

When warmboot via HSM, coolboot has been completed and
wait_for_coldboot can be skipped to speed up.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Previous patch introduced a change that using hart count as the default
number of tlb entries in the fifo. This makes the default tlb fifo size
grow in square with the number of harts. So the default heap size is
not enough to allocate tlb fifo when the hart count is big.

Fixes: 52fd64b8

 ("platform: Uses hart count as the default size of tlb info")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Current interruptible hart mask doesn't include the hart which HSM state
is SBI_HSM_STATE_RESUME_PENDING. So when there is a request to send an
IPI to the hart which is in the resume process, this hart would miss the
IPI forever. Put the SBI_HSM_STATE_RESUME_PENDING hart in the
interruptible hart mask to fix the issue.

Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

These sections are only intended to hold data, and should not be executable.

Signed-off-by: Matt Waltz <matthewwaltzis@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

The counter info should only return valid hardware counters for the ones
set in the counter mask. Otherwise, it will report incorrect number of
hardware counters to the supervisor if the platform has discontiguous
counters.

Fixes: c744ed77

 ("lib: sbi_pmu: Enable noncontigous hpm event and counters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

OpenSBI doesn't support SBI PMU snapshot yet as there is not much benefit
unless the multiple counters overflow at the same time.

Just add the definition and return not supported error at this moment. The
default returned error is also not supported. Thus, no functional change
intended.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>

This minimizes the need to call log2roundup() to recover the log value.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Multiple harts may try to send IPI to a particular target hart A
in which case the send_ipi() should be called only when the old
value of the hart A ipi_type is zero.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Simplify atomic-related bit operations through __atomic intrinsics.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

The original code returns the value of the word before modification.
When modifying the upper 32 bits under RV64, the value returned via
int return will have no meaning. Corrected to return the value of the
bit. And modify the function description.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lr/sc is part of the A extension. If the A extension is not supported,
lr/sc cannot be used. So remove xchg/cmpxchg.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Add PMU node example for event index to counter index mapping
and selector value translation of Andes' CPUs.

Currently, there are 4 HPM counters that can be used to monitor
all of the events for each hart.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

The valid entry count is tracking by hw_event_count so there
is no need to check the whole table.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

To allow platform override pmu_init() filling the translation table
fdt_pmu_evt_select[] when PMU node doesn't provide such information,
we need to share the table and its entry counter with other .c file.

We also define the structures of PMU property in fdt_helper.h, so we
can initialize the mappings in arrays.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

We will need is_andes(45) in the following patch,
so factor out the code that parses marchid to make
it reusable for checking any Andes CPU variants.

Also improves the comment in ae350_hart_start().

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Add a Kconfig option to control PMU fixup, so the next
stage software can dump the PMU node including event
mapping information for debugging purposes.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Enable Andes PMU extension support for RZ/Five.
We also staticize renesas_rzfive_early_init() as
it is not used outside of this unit.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Enable Andes PMU extension support for AE350 platforms.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Before the ratification of Sscofpmf, the Andes PMU extension
was designed to support the sampling and filtering with hardware
performance counters (zihpm), it works with the current SBI PMU
extension and Linux SBI PMU driver.

We implement 1) the PMU device callbacks that update the
corresponding bits on custom CSRs, 2) extentions_init() to detect
the hardware support of Andes PMU and initialize the per-hart
PMU related CSR, and 3) pmu_init() to register PMU device and
populate event mappings.

Also define a andes_pmu_setup() function which is in preparation
for adding default PMU mappings in andes_hpm.h

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Add pmu_init() platform override, which will be used to register
PMU device and populate event mappings.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Add CSR definitions for Andes PMU extension.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Add support for custom PMU extensions to set inhibit bits
on custom CSRs by introducing the PMU device callback
hw_counter_filter_mode(). This allows the perf tool to
restrict event counting under a specified privileged
mode by appending a modifier, e.g. perf record -e event:k
to count events only happening in kernel mode.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Add the custom extension to hart extension list.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

This patch makes the following changes:

- As sbi_platform_pmu_init() returns a negative error code on
  failure, let sbi_pmu_init() print out the error code with
  sbi_dprintf().

- In order to distinguish the SBI_EFAIL error returned by
  sbi_pmu_add_*_counter_map(), return SBI_ENOENT to indicate
  that fdt_pmu_setup() failed to locate "riscv,pmu" node, and
  generic_pmu_init() ignores such case.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>