The original patch was:
  https://reviews.llvm.org/D105806

There were some issues with undeterministic behaviour of the sorting
function, which led to scalable-call.ll passing and/or failing. This
patch fixes the issue by numbering all instructions in the array first,
and using that number as the order, which should provide a consistent
ordering.

This reverts commit a607f641.

This patch teaches the compiler to identify a wider variety of
`BUILD_VECTOR`s which form integer arithmetic sequences, and to lower
them to `vid.v` with modifications for non-unit steps and non-zero
addends.

The sequences handled by this optimization must either be monotonically
increasing or decreasing. Consecutive elements holding the same value
indicate a fractional step which, while simple mathematically,
becomes more complex to handle both in the realm of lossy integer
division and in the presence of `undef`s.

For example, a common "interleaving" shuffle index will be lowered by
LLVM to both `<0,u,1,u,2,...>` and `<u,0,u,1,u,...>` `BUILD_VECTOR`
nodes. Either of these would ideally be lowered to `vid.v` shifted right
by 1. Detection of this sequence in presence of general `undef` values
is more complicated, however: `<0,u,u,1,>` could match either
`<0,0,0,1,>` or `<0,0,1,1,>` depending on later values in the sequence.
Both are possible, so backtracking or multiple passes is inevitable.

Sticking to monotonic sequences keeps the logic simpler as it can be
done in one pass. Fractional steps will likely be a separate
optimization in a future patch.

Reviewed By: craig.topper

Differential Revision: https://reviews.llvm.org/D104921

Remove duplicate and stale doc comment on affineParallelize. NFC.

Differential Revision: https://reviews.llvm.org/D106055

This change addresses this assertion that occurs in a downstream
compiler with a custom target.

```APInt.h:1151: bool llvm::APInt::operator==(const llvm::APInt &) const: Assertion `BitWidth == RHS.BitWidth && "Comparison requires equal bit widths"'```

No covering test case is susbmitted with this change since this crash
cannot be reproduced using any upstream supported target. The test case
that exposes this issue is as simple as:

```lang=c++
  void test(int * p) {
    int * q = p-1;
    if (q) {}
    if (q) {} // crash
    (void)q;
  }
```

The custom target that exposes this problem supports two address spaces,
16-bit `char`s, and a `_Bool` type that maps to 16-bits. There are no upstream
supported targets with similar attributes.

The assertion appears to be happening as a result of evaluating the
`SymIntExpr` `(reg_$0<int * p>) != 0U` in `VisitSymIntExpr` located in
`SimpleSValBuilder.cpp`. The `LHS` is evaluated to `32b` and the `RHS` is
evaluated to `16b`. This eventually leads to the assertion in `APInt.h`.

While this change addresses the crash and passes LITs, two follow-ups
are required:
  1) The remainder of `getZeroWithPtrWidth()` and `getIntWithPtrWidth()`
     should be cleaned up following this model to prevent future
     confusion.
  2) We're not sure why references are found along with the modified
     code path, that should not be the case. A more principled
     fix may be found after some further comprehension of why this
     is the case.

Acks: Thanks to @steakhal and @martong for the discussions leading to this
fix.

Reviewed By: NoQ

Differential Revision: https://reviews.llvm.org/D105974

Differential Revision: https://reviews.llvm.org/D105982

Use ManagedStatic and lazy initialization of cl::opt in libSupport to make it free of global initializer

We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.

Reviewed By: lattner, jpienaar

Differential Revision: https://reviews.llvm.org/D105959

Revert "Use ManagedStatic and lazy initialization of cl::opt in libSupport to make it free of global initializer"

This reverts commit af932173.
Still some specific config broken in some way that requires more
investigation.

This reverts commit 7c637260.

Differential Revision: https://reviews.llvm.org/D106055

Added information stored in PipelineOptions and the MCSubtargetInfo.

Bug: https://bugs.llvm.org/show_bug.cgi?id=51041

Reviewed By: andreadb

Differential Revision: https://reviews.llvm.org/D106077

    This patch handles the `<<` operator defined for `std::unique_ptr` in
    the std namespace (ignores custom overloads of the operator).

    Differential Revision: https://reviews.llvm.org/D105421

Use ManagedStatic and lazy initialization of cl::opt in libSupport to make it free of global initializer

We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.

Reviewed By: lattner, jpienaar

Differential Revision: https://reviews.llvm.org/D105959

Fix mismatch between the provisioning of asyncExecutors and the actual thread count currently in the context (NFC)

This fixes an assert in some deployment where the threadpool is
customized.

We've been requiring macOS 10.11 since 2018 so there's no point in
keeping code for 10.10 around.

After we relocate counters, we no longer need to keep the original copy
around so we can return the memory back to the operating system.

Differential Revision: https://reviews.llvm.org/D104839

This patch addresses assertion failure in case when the only found formula for LSR
is `1*reg => reg` which was supposed to be an impossible situation, however there
is a test that shows it is possible.

In this case, we can use scale register with scale of 1 as the missing base register.

Reviewed By: huihuiz, reames
Differential Revision: https://reviews.llvm.org/D105009

This patch handles all the comparision methods (defined via overloaded
operators) on std::unique_ptr. These operators compare the underlying
pointers, which is modelled by comparing the corresponding inner-pointer
SVal. There is also a special case for comparing the same pointer.

Differential Revision: https://reviews.llvm.org/D104616

When setting Allocatable on a generated register class check all
superclasses and set Allocatable true if any superclass is
allocatable.

Without this change generated register classes based on an
allocatable class may end up unallocatable due to the topological
inheritance order.

This change primarily effects AMDGPU backend; however, there are
a few changes in MIPs GlobalISel register constraints as a result.

Reviewed By: kparzysz

Differential Revision: https://reviews.llvm.org/D105967

In D105866, we used an intermediate container to store a list of opcodes. Here,
we use that data structure to help us perform optimization passes that would allow
a more efficient encoding of bind opcodes. Currently, the functionality mirrors the
optimization pass {1,2} done in ld64 for bind opcodes under optimization gate
to prevent slight regressions.

Reviewed By: int3, #lld-macho

Differential Revision: https://reviews.llvm.org/D105867

A common use of `ChangeStatus` is as follows:
```
ChangeStatus Changed = ChangeStatus::UNCHANGED;
Changed |= foo();
```
where `foo` returns `ChangeStatus` as well. Currently `ChangeStatus` doesn't
support compound assignment, we have to write as
```
Changed = Changed | foo();
```
which is not that convenient.

This patch add the support for compound assignment for `ChangeStatus`. Compound
assignment is usually implemented as a member function, and binary arithmetic
operator is therefore implemented using compound assignment. However, unlike
regular C++ class, enum class doesn't support member functions. As a result, they
can only be implemented in the way shown in the patch.

Reviewed By: jdoerfert

Differential Revision: https://reviews.llvm.org/D106109

Revert "Use ManagedStatic and lazy initialization of cl::opt in libSupport to make it free of global initializer"

This reverts commit 42f588f3.
Broke some buildbots

Use ManagedStatic and lazy initialization of cl::opt in libSupport to make it free of global initializer

We can build it with -Werror=global-constructors now. This helps
in situation where libSupport is embedded as a shared library,
potential with dlopen/dlclose scenario, and when command-line
parsing or other facilities may not be involved. Avoiding the
implicit construction of these cl::opt can avoid double-registration
issues and other kind of behavior.

Reviewed By: lattner, jpienaar

Differential Revision: https://reviews.llvm.org/D105959

In cases where an operation has an argument or result named 'property', the
ODS-generated python fails on import because the `@property` resolves to the
`property` operation argument instead of the builtin `@property` decorator. We
should always use the fully qualified decorator name.

Reviewed By: mikeurbach

Differential Revision: https://reviews.llvm.org/D106106

[NFC][OpenMP][Offloading] Replaced explicit parallel level computation with function `__kmpc_parallel_level`

There are two places in current deviceRTLs where it computes parallel level explicitly,
which is basically the functionality of `__kmpc_parallel_level`. Starting from
D105787, we plan to introduce a series of function call folding based on information
that can be deducted during compilation time. Computation of parallel level is
the next target. This patch makes steps for the optimization.

Reviewed By: jdoerfert

Differential Revision: https://reviews.llvm.org/D105955

This configuration is interesting because GCC has a different level of
strictness for some C++ rules. In particular, it implements the older
standards more stringently than Clang, which can help find places where
we are non-conforming (especially in the test suite).

Differential Revision: https://reviews.llvm.org/D105936

It was possible to re-add a module to a shared in-memory module cache
when search paths are changed. This can eventually cause a crash if the
original module is referenced after this occurs.
  1. Module A depends on B
  2. B exists in two paths C and D
  3. First run only has C on the search path, finds A and B and loads
     them
  4. Second run adds D to the front of the search path. A is loaded and
     contains a reference to the already compiled module from C. But
     searching finds the module from D instead, causing a mismatch
  5. B and the modules that depend on it are considered out of date and
     thus rebuilt
  6. The recompiled module A is added to the in-memory cache, freeing
     the previously inserted one

This can never occur from a regular clang process, but is very easy to
do through the API - whether through the use of a shared case or just
running multiple compilations from a single `CompilerInstance`. Update
the compilation to return early if a module is already finalized so that
the pre-condition in the in-memory module cache holds.

Resolves rdar://78180255

Differential Revision: https://reviews.llvm.org/D105328

Use double pound at the start of the line to differentiate comments from
statements for Lit or FileCheck.

I will also use this small commit to check my commit access.

Differential Revision: https://reviews.llvm.org/D106103

Add spv.GLSL.FMix opertaion.

co-authered-by: Alan Liu <alanliu.yf@gmail.com>

Reviewed By: mravishankar

Differential Revision: https://reviews.llvm.org/D104153

We want to incorporate some of the optimization passes in bind opcodes from ld64.
This revision makes no functional changes but to start storing opcodes in intermediate
containers in preparation for implementing the optimization passes in a follow-up revision.

Differential Revision: https://reviews.llvm.org/D105866

The goal of this change is to test if I can commit changes.

Reviewed By: kcc

Differential Revision: https://reviews.llvm.org/D106101

This reverts commit e33446ea.
Doesn't build on mac, and causes other problems. See reports
on https://reviews.llvm.org/D106046 and https://reviews.llvm.org/D106081

Also revert follow-up "tsan: strip top inlined internal frames"
This reverts commit 7b302fc9.

Since we're still building on top of the MVT based infrastructure, we
need to track the pointer type/address space on the side so we can end
up with the correct pointer LLTs when interpreting CCValAssigns.

This change adds AllocateMemory and DeallocateMemory methods to the SBProcess
API, so that clients can allocate and deallocate memory blocks within the
process being debugged (for storing JIT-compiled code or other uses).

(I am developing a debugger + REPL using the API; it will need to store
JIT-compiled code within the target.)

Reviewed By: clayborg, jingham

Differential Revision: https://reviews.llvm.org/D105389