- Oct 23, 2023
-
-
Kalle Valo authored
make htmldocs warns: Documentation/driver-api/80211/cfg80211:48: ./include/net/cfg80211.h:7290: WARNING: Duplicate C declaration, also defined at cfg80211:7251. Declaration is '.. c:function:: void cfg80211_rx_assoc_resp (struct net_device *dev, struct cfg80211_rx_assoc_resp *data)'. This is because there's a function named cfg80211_rx_assoc_resp() and a struct named cfg80211_rx_assoc_resp, see previous patch for more info. To workaround this rename the struct to cfg80211_rx_assoc_resp_data. The parameter for the function is named 'data' anyway so the naming here is consistent. Compile tested only. Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231012114229.2931808-3-kvalo@kernel.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Kalle Valo authored
make htmldocs warns: Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117. Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'. This is because there's a function named ieee80211_tx_status() and a struct named ieee80211_tx_status. This has been discussed previously but no solution found: https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/ There's also a bug open for three years with no solution in sight: https://github.com/sphinx-doc/sphinx/pull/8313 So I guess we have no other solution than to a workaround this in the code, for example to rename the function to ieee80211_tx_status_skb() to avoid the name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in which the skb is not provided as an argument, instead with ieee80211_tx_status_skb() the skb is provided. Compile tested only. Signed-off-by:
-
Miri Korenblit authored
There is a requirement from OEMs to support a new bit in DSM function 8, which will indicate that this device is an indoor one, and that it should activate UNII-1 (5.2GHz) sub band in the World Wide Geo Profile. Add support for this by reading this bit from BIOS and sending it to the FW. Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.86d4ad178042.Ief40acc08b5482ff147fd17e74e36f1933e43def@changeid Signed-off-by:
-
Johannes Berg authored
When we remove TDLS stations, we need to remove them from FW immediately, even while associated. Some previous refactoring here lost the sta ID condition, add it back. Fixes: 57974a55 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by:
-
Johannes Berg authored
When I implemented iwl_mvm_mac_flush_sta() I completely botched it; it basically always happens after the iwl_mvm_sta_pre_rcu_remove() call, and that already clears mvm->fw_id_to_mac_id[] entries, so we cannot rely on those at iwl_mvm_mac_flush_sta() time. This means it never did anything. Fix this by just going through the station IDs and now with the new API for iwl_mvm_flush_sta(), call those. Fixes: a6cc6ccb ("wifi: iwlwifi: mvm: support new flush_sta method") Signed-off-by:
-
Johannes Berg authored
This API is type unsafe and needs an extra parameter to know what kind of station was passed, so it has two, but really it only needs two values. Just pass the values instead of doing this type-unsafe dance, which will also make it better to use for multi-link. Signed-off-by:
-
Haim Dreyfuss authored
There are devices that need longer time to get the alive notification. Signed-off-by:
Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
We seem to have an issue in case we had a BSS and a P2P device on channel 1 and then, the P2P device gets an ROC on channel 6. We would change the channel of the PHY context to channel 6 even if the BSS was using that same PHY context. Revamp that code and don't try to change a PHY context, it doesn't mean much for the firmware anyway. Just remove it and allocate a new one. This makes the logic easier to follow. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
When we want to add a phy_ctxt, we need to increase the ref. Note that all the WARN_ONs are already in place: * We check that we don't add a context with ref != 0 * We check that we don't modify a context with ref = 0 Signed-off-by:
-
Emmanuel Grumbach authored
From its very first stages of development, iwlmvm added all the PHY context immediately upon firmware boot. Then, all we needed to do is to modify the contexts. This was fine if the addition of a PHY context that we don't need is free. This was true until now. Newer devices will run calibrations upon the addition of a PHY context. Change the way we work with PHY context in iwlmvm. Fortunately, we already have all the ref counting in place so that it is not very hard to do. Also, since we now remove the PHY context before the link is removed (but after it has been de-activated of course), it'll confuse the firmware if we put the late phy_id into the LINK command that removes the link. Change this to put an invalid phy_id just like we do when we add a link that has no PHY context yet. Signed-off-by:
-
Miri Korenblit authored
bss_info_changed() callback of mac80211 was originally in both MLD and non-MLD API. Therefore, we extracted the common part to a function which receives a callback structure with the mode-specific (non-MLO\MLO) ops. Eventually, for MLO API, bss_info_changed() callback was split into 2 callbacks: link_info_changed() and vif_cfg_changed() so it is no longer in use for MLO, only for non-MLO. Remove the code that uses the mode-specific callback structure. Signed-off-by:
-
Shaul Triebitz authored
Define the new API for ROC command and notification. Use ROC version 3 command and notificaiton for hotspot. Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Alon Giladi authored
Read the EDT (Energy detection threshold) optimization configuration table from BIOS using DSM Function and send it to FW. Signed-off-by:
Alon Giladi <alon.giladi@intel.com> Signed-off-by:
Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by:
-
Ilan Peer authored
When an IGTK is installed for an AP interface, there is no station associated with it. However, the MFP flag must be set for the installed key as otherwise the FW wouldn't use it. Fix the security key flag to set the MFP flag also when the AP is an AP interface and the key index matches that of an IGTK. Fixes: 5c75a208 ("wifi: iwlwifi: mvm: support new key API") Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Matt Chen authored
Add new oem/odm pair to tas approved vendors list when specified by platform. Signed-off-by:
Matt Chen <matt.chen@intel.com> Signed-off-by:
-
Ilan Peer authored
Fix unreachable code path that was introduced in the P2P Device linking refactoring. Signed-off-by:
-
Mukesh Sisodiya authored
Add the support for new RF based on step-id. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Gregory Greenman authored
In reality 64 bytes are enough to hold fw version string, but some compilers can complain (with W=1) that output may be truncated when building this string with snprintf. Increase the size to avoid this sort of warnings and state explicitely that we want the size to be trancated to 32 bytes. Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231012153950.f4465b4b4e2b.Idced2e8d63c492872edcde1a3ce2cdd6cc0f8eb7@changeid Signed-off-by:
-
Johannes Berg authored
When using e.g. bonding, and doing a sequence such as # iw wlan0 set type __ap # ip link add name bond1 type bond # ip link set wlan0 master bond1 # iw wlan0 interface del we deadlock, since the wlan0 interface removal will cause bonding to reset the MAC address of wlan0. The locking would be somewhat difficult to fix, but since this only happens during removal, we can simply ignore the MAC address change at this time. Reported-by:
<syzbot+25b3a0b24216651bc2af@syzkaller.appspotmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). While there, use struct_size() helper, instead of the open-coded version, to calculate the size for the allocation of the whole flexible structure including, of course, the flexible-array member. This code was found with the help of Coccinelle, and audited and fixed manually. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/ZSQ/jcmTAf/PKHg/@work Signed-off-by:
-
Dmitry Antipov authored
In 'iwl_parse_tlv_firmware()', check for 'kmemdup()' return value when handling IWL_UCODE_TLV_CURRENT_PC and set the number of parsed entries only if an allocation was successful (just like it does with handling IWL_UCODE_TLV_CMD_VERSIONS above). Compile tested only. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Acked-by:
-
Dmitry Antipov authored
Remove unused 'hdr_size' argument of 'ieee80211_get_tdls_action()' and adjust 'ieee80211_report_used_skb()' accordingly. Signed-off-by:
-
Ilan Peer authored
In case the link puncturing is changed such that the channel is no longer punctured, configure the FW correctly indicating the EHT parameters changed (with a 0 punctured map). Allow EHT parameters configuration only when the link really supports EHT. Fixes: 55eb1c5f ("wifi: iwlwifi: mvm: add support for the new LINK command") Signed-off-by:
-
Mukesh Sisodiya authored
The macros used to get the RF step and flavour are using wrong bit range. Update the bit range for both macros. Signed-off-by:
-
Mukesh Sisodiya authored
During debugfs command handling transport function is used directly, this bypasses the locking used by runtime operation function and leads to a kernel warning when two commands are sent in parallel. Fix it by using runtime operations function when sending debugfs command. Signed-off-by:
-
Ayala Beker authored
This doesn't require any special implementation from our device, just allows transmission of SCS request frame containing a QoS characteristics sub element. Signed-off-by:
Ayala Beker <ayala.beker@intel.com> Signed-off-by:
-
Ilan Peer authored
It is not necessary to keep the P2P Device bound/linked to a PHY context when there is no active ROC. Modify the P2P Device flows so the binding/linking would be done only while ROC is active. With this change the switch_phy_ctxt() is no longer needed so remove it. Signed-off-by:
-
iallouch authored
mac_ctdp_sum contains the power consumption, appears in power save report, and is used for debugging and collection of statistics. Add a debugfs handler to start this calculation, iff ctdp command is supported in the firmware. While on it, add an option to force start/stop this calculation, which is safe from the firmware API side. Signed-off-by:
iallouch <itai.allouche@intel.com> Signed-off-by:
Nitsan Bar <nitsan.bar@intel.com> Signed-off-by:
-
Miri Korenblit authored
In RFKILL we first set the RFKILL bit, then we abort scan (if one exists) by waiting for the notification from FW and notifying mac80211. And then we stop the device. But in case we have a scan ongoing in the period of time between rfkill on and before the device is stopped - we will not wait for the FW notification because of the iwl_mvm_is_radio_killed() condition, and then the scan_status and uid_status are misconfigured, (scan_status is cleared but uid_status not) and when the notification suddenly arrives (before stopping the device) we will get into the assert about scan_status and uid_status mismatch. Fix this by waiting for FW notif when rfkill is on but the device isn't disabled yet. Signed-off-by:
-
Ilan Peer authored
Add simple logic that would allow using EMLSR in case there are multiple valid links: - In case the connection establishment has just been completed try to find a valid link pair for EMLSR functionality where one of the links in the pair is the current active link. - In case the valid links changed after connection was already established, try to find a valid link pair for EMLSR functionality, in case the EMSLR is not active yet. If a valid link pair is found call mac80211 to asynchronously set the new link pair, otherwise continue using the current active links. Signed-off-by:
-
Johannes Berg authored
When MEI isn't built, it seems like successfully registering would be wrong. Change this to an error so that in the rest of the driver, mei_registered won't be true. Signed-off-by:
-
Johannes Berg authored
We shouldn't check the 0x10 bit here, since the register holds different values (not just bit masks.). Check for the exact value where this is needed only. Signed-off-by:
-
Miri Korenblit authored
Add a per-link debugfs entry in iwlmvm level so we can read/write link related parameters. Do it by implementing the link_add_debugfs API introduced by mac80211. Each entry will have a path like this: .../netdev:wlan0/link-X/iwlmvm/<file_name> for each link X. For non-MLD vifs this callback is called when the original vif debugfs dir is also created, so handle that case by not creating the 'iwlmvm' directory again. Note that we don't have to worry about the cleaning the iwlmvm/* directory as it is already done by mac80211 when removing the link (or netdev). Signed-off-by:
-
Johannes Berg authored
mac80211 added a new callback to add a vif debugfs. Implement it instead of adding the debugfs directly, which will make it properly preserved over switching the vif from non-MLD/MLD and back. This requires some rework so that we still have the symlink but trust mac80211 to add/remove the debugfs. Signed-off-by:
-
Rotem Saado authored
The bits are wrong, the jacket bit should be 5 and cdb bit 4. Fix it. Fixes: 1f171f4f ("iwlwifi: Add support for getting rf id with blank otp") Signed-off-by:
Rotem Saado <rotem.saado@intel.com> Signed-off-by:
-
Miri Korenblit authored
YoYo introduces 2 new region types: prph mac and phy blocks. The data in this regions consists of a list of (base address, size) pairs. This way we can set a block of consecutive registers by the base address and the size, instead of a list of registers. Add support for parsing and dumping these new region types Signed-off-by:
-
Miri Korenblit authored
YoYo (debug data collection mechanism) is introducing 2 new types of regions: prph mac/phy ranges. These types will have a common logic of reading the data from the device as the mac/phy prph has. Put it in a separate function so it can be reused. Signed-off-by:
-
Randy Dunlap authored
Correct some typos. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231001191633.19090-3-rdunlap@infradead.org Signed-off-by:
-
Randy Dunlap authored
Correct typos and fix run-on sentences. Signed-off-by:
-
Randy Dunlap authored
Correct spelling of several words. Signed-off-by:
-
