Pull tracing fixes from Steven Rostedt:
 "Various bug fixes:

   - Two small memory leaks in error paths.

   - A missed return error code on an error path.

   - A fix to check the tracing ring buffer CPU when it doesn't exist
     (caused by setting maxcpus on the command line that is less than
     the actual number of CPUs, and then onlining them manually).

   - A fix to have the reset of boot tracers called by lateinit_sync()
     instead of just lateinit(). As some of the tracers register via
     lateinit(), and if the clear happens before the tracer is
     registered, it will never start even though it was told to via the
     kernel command line"

* tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix freeing of filter in create_filter() when set_str is false
  tracing: Fix kmemleak in tracing_map_array_free()
  ftrace: Check for null ret_stack on profile function graph entry function
  ring-buffer: Have ring_buffer_alloc_read_page() return error on offline CPU
  tracing: Missing error code in tracer_alloc_buffers()
  tracing: Call clear_boot_tracer() at lateinit_sync

Pull ARM SoC fixes from Arnd Bergmann:
 "A small number of bugfixes, again nothing serious.

   - Alexander Dahl found multiple bugs in the Atmel memory interface
     driver

   - A randconfig build fix for at91 was incomplete, the second attempt
     fixes the remaining corner case

   - One fix for the TI Keystone queue handler

   - The Odroid XU4 HDMI port (added in 4.13) needs a small DT fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: exynos: add needs-hpd for Odroid-XU3/4
  ARM: at91: don't select CONFIG_ARM_CPU_SUSPEND for old platforms
  soc: ti: knav: Add a NULL pointer check for kdev in knav_pool_create
  memory: atmel-ebi: Fix smc cycle xlate converter
  memory: atmel-ebi: Allow t_DF timings of zero ns
  memory: atmel-ebi: Fix smc timing return value evaluation

The implementation of TIOCGPTPEER has two issues.

When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong
vfsmount is passed to dentry_open.  Which results in the kernel displaying
the wrong pathname for the peer.

The second is simply by caching the vfsmount and dentry of the peer it leaves
them open, in a way they were not previously Which because of the inreased
reference counts can cause unnecessary behaviour differences resulting in
regressions.

To fix these move the ioctl into tty_io.c at a generic level allowing
the ioctl to have access to the struct file on which the ioctl is
being called.  This allows the path of the slave to be derived when
opening the slave through TIOCGPTPEER instead of requiring the path to
the slave be cached.  Thus removing the need for caching the path.

A new function devpts_ptmx_path is factored out of devpts_acquire and
used to implement a function devpts_mntget.   The new function devpts_mntget
takes a filp to perform the lookup on and fsi so that it can confirm
that the superblock that is found by devpts_ptmx_path is the proper superblock.

v2: Lots of fixes to make the code actually work
v3: Suggestions by Linus
    - Removed the unnecessary initialization of filp in ptm_open_peer
    - Simplified devpts_ptmx_path as gotos are no longer required

[ This is the fix for the issue that was reverted in commit
  143c97cc, but this time without breaking 'pbuilder' due to
  increased reference counts   - Linus ]

Fixes: 54ebbfb1

 ("tty: add TIOCGPTPEER ioctl")
Reported-by: Christian Brauner <christian.brauner@canonical.com>
Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Performing the following task with kmemleak enabled:

 # cd /sys/kernel/tracing/events/irq/irq_handler_entry/
 # echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger
 # echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger
 # echo scan > /sys/kernel/debug/kmemleak
 # cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8800b9290308 (size 32):
  comm "bash", pid 1114, jiffies 4294848451 (age 141.139s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0
    [<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290
    [<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940
    [<ffffffff812639c9>] create_filter+0xa9/0x160
    [<ffffffff81263bdc>] create_event_filter+0xc/0x10
    [<ffffffff812655e5>] set_trigger_filter+0xe5/0x210
    [<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490
    [<ffffffff812652e2>] event_trigger_write+0x1a2/0x260
    [<ffffffff8138cf87>] __vfs_write+0xd7/0x380
    [<ffffffff8138f421>] vfs_write+0x101/0x260
    [<ffffffff8139187b>] SyS_write+0xab/0x130
    [<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe
    [<ffffffffffffffff>] 0xffffffffffffffff

The function create_filter() is passed a 'filterp' pointer that gets
allocated, and if "set_str" is true, it is up to the caller to free it, even
on error. The problem is that the pointer is not freed by create_filter()
when set_str is false. This is a bug, and it is not up to the caller to free
the filter on error if it doesn't care about the string.

Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com

Cc: stable@vger.kernel.org
Fixes: 38b78eb8

 ("tracing: Factorize filter creation")
Reported-by: Chunyu Hu <chuhu@redhat.com>
Tested-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

kmemleak reported the below leak when I was doing clear of the hist
trigger. With this patch, the kmeamleak is gone.

unreferenced object 0xffff94322b63d760 (size 32):
  comm "bash", pid 1522, jiffies 4403687962 (age 2442.311s)
  hex dump (first 32 bytes):
    00 01 00 00 04 00 00 00 08 00 00 00 ff 00 00 00  ................
    10 00 00 00 00 00 00 00 80 a8 7a f2 31 94 ff ff  ..........z.1...
  backtrace:
    [<ffffffff9e96c27a>] kmemleak_alloc+0x4a/0xa0
    [<ffffffff9e424cba>] kmem_cache_alloc_trace+0xca/0x1d0
    [<ffffffff9e377736>] tracing_map_array_alloc+0x26/0x140
    [<ffffffff9e261be0>] kretprobe_trampoline+0x0/0x50
    [<ffffffff9e38b935>] create_hist_data+0x535/0x750
    [<ffffffff9e38bd47>] event_hist_trigger_func+0x1f7/0x420
    [<ffffffff9e38893d>] event_trigger_write+0xfd/0x1a0
    [<ffffffff9e44dfc7>] __vfs_write+0x37/0x170
    [<ffffffff9e44f552>] vfs_write+0xb2/0x1b0
    [<ffffffff9e450b85>] SyS_write+0x55/0xc0
    [<ffffffff9e203857>] do_syscall_64+0x67/0x150
    [<ffffffff9e977ce7>] return_from_SYSCALL_64+0x0/0x6a
    [<ffffffffffffffff>] 0xffffffffffffffff
unreferenced object 0xffff9431f27aa880 (size 128):
  comm "bash", pid 1522, jiffies 4403687962 (age 2442.311s)
  hex dump (first 32 bytes):
    00 00 8c 2a 32 94 ff ff 00 f0 8b 2a 32 94 ff ff  ...*2......*2...
    00 e0 8b 2a 32 94 ff ff 00 d0 8b 2a 32 94 ff ff  ...*2......*2...
  backtrace:
    [<ffffffff9e96c27a>] kmemleak_alloc+0x4a/0xa0
    [<ffffffff9e425348>] __kmalloc+0xe8/0x220
    [<ffffffff9e3777c1>] tracing_map_array_alloc+0xb1/0x140
    [<ffffffff9e261be0>] kretprobe_trampoline+0x0/0x50
    [<ffffffff9e38b935>] create_hist_data+0x535/0x750
    [<ffffffff9e38bd47>] event_hist_trigger_func+0x1f7/0x420
    [<ffffffff9e38893d>] event_trigger_write+0xfd/0x1a0
    [<ffffffff9e44dfc7>] __vfs_write+0x37/0x170
    [<ffffffff9e44f552>] vfs_write+0xb2/0x1b0
    [<ffffffff9e450b85>] SyS_write+0x55/0xc0
    [<ffffffff9e203857>] do_syscall_64+0x67/0x150
    [<ffffffff9e977ce7>] return_from_SYSCALL_64+0x0/0x6a
    [<ffffffffffffffff>] 0xffffffffffffffff

Link: http://lkml.kernel.org/r/1502705898-27571-1-git-send-email-chuhu@redhat.com

Cc: stable@vger.kernel.org
Fixes: 08d43a5f

 ("tracing: Add lock-free tracing_map")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

There's a small race when function graph shutsdown and the calling of the
registered function graph entry callback. The callback must not reference
the task's ret_stack without first checking that it is not NULL. Note, when
a ret_stack is allocated for a task, it stays allocated until the task exits.
The problem here, is that function_graph is shutdown, and a new task was
created, which doesn't have its ret_stack allocated. But since some of the
functions are still being traced, the callbacks can still be called.

The normal function_graph code handles this, but starting with commit
8861dd30 ("ftrace: Access ret_stack->subtime only in the function
profiler") the profiler code references the ret_stack on function entry, but
doesn't check if it is NULL first.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=196611

Cc: stable@vger.kernel.org
Fixes: 8861dd30

 ("ftrace: Access ret_stack->subtime only in the function profiler")
Reported-by:  <lilydjwg@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

This reverts commit c8c03f18

.

It turns out that while fixing the ptmx file descriptor to have the
correct 'struct path' to the associated slave pty is a really good
thing, it breaks some user space tools for a very annoying reason.

The problem is that /dev/ptmx and its associated slave pty (/dev/pts/X)
are on different mounts.  That was what caused us to have the wrong path
in the first place (we would mix up the vfsmount of the 'ptmx' node,
with the dentry of the pty slave node), but it also means that now while
we use the right vfsmount, having the pty master open also keeps the pts
mount busy.

And it turn sout that that makes 'pbuilder' very unhappy, as noted by
Stefan Lippers-Hollmann:

 "This patch introduces a regression for me when using pbuilder
  0.228.7[2] (a helper to build Debian packages in a chroot and to
  create and update its chroots) when trying to umount /dev/ptmx (inside
  the chroot) on Debian/ unstable (full log and pbuilder configuration
  file[3] attached).

  [...]
  Setting up build-essential (12.3) ...
  Processing triggers for libc-bin (2.24-15) ...
  I: unmounting dev/ptmx filesystem
  W: Could not unmount dev/ptmx: umount: /var/cache/pbuilder/build/1340/dev/ptmx: target is busy
          (In some cases useful info about processes that
           use the device is found by lsof(8) or fuser(1).)"

apparently pbuilder tries to unmount the /dev/pts filesystem while still
holding at least one master node open, which is arguably not very nice,
but we don't break user space even when fixing other bugs.

So this commit has to be reverted.

I'll try to figure out a way to avoid caching the path to the slave pty
in the master pty.  The only thing that actually wants that slave pty
path is the "TIOCGPTPEER" ioctl, and I think we could just recreate the
path at that time.

Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Eric W Biederman <ebiederm@xmission.com>
Cc: Christian Brauner <christian.brauner@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CEC support was added for Exynos5 in 4.13, but for the Odroids we need to set
'needs-hpd' as well since CEC is disabled when there is no HDMI hotplug signal,
just as for the exynos4 Odroid-U3.

This is due to the level-shifter that is disabled when there is no HPD, thus
blocking the CEC signal as well. Same close-but-no-cigar board design as the
Odroid-U3.

Tested with my Odroid XU4.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull arm64 fixes from Will Deacon:
 "Late arm64 fixes.

  They fix very early boot failures with KASLR where the early mapping
  of the kernel is incorrect, so the failure mode looks like a hang with
  no output. There's also a signal-handling fix when a uaccess routine
  faults with a fatal signal pending, which could be used to create
  unkillable user tasks using userfaultfd and finally a state leak fix
  for the floating pointer registers across a call to exec().

  We're still seeing some random issues crop up (inode memory corruption
  and spinlock recursion) but we've not managed to reproduce things
  reliably enough to debug or bisect them yet.

  Summary:

   - Fix very early boot failures with KASLR enabled

   - Fix fatal signal handling on userspace access from kernel

   - Fix leakage of floating point register state across exec()"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kaslr: Adjust the offset to avoid Image across alignment boundary
  arm64: kaslr: ignore modulo offset when validating virtual displacement
  arm64: mm: abort uaccess retries upon fatal signal
  arm64: fpsimd: Prevent registers leaking across exec

Pull GPIO fixes from Linus Walleij:
 "Here are the (hopefully) last GPIO fixes for v4.13:

   - an important core fix to reject invalid GPIOs *before* trying to
     obtain a GPIO descriptor for it.

   - a driver fix for the mvebu driver IRQ handling"

* tag 'gpio-v4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mvebu: Fix cause computation in irq handler
  gpio: reject invalid gpio before getting gpio_desc

Pull SCSI fixes from James Bottomley:
 "Six minor and error leg fixes, plus one major change: the reversion of
  scsi-mq as the default.

  We're doing the latter temporarily (with a backport to stable) to give
  us time to fix all the issues that turned up with this default before
  trying again"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: cxgb4i: call neigh_event_send() to update MAC address
  Revert "scsi: default to scsi-mq"
  scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd()
  scsi: aacraid: Fix out of bounds in aac_get_name_resp
  scsi: csiostor: fail probe if fw does not support FCoE
  scsi: megaraid_sas: fix error handle in megasas_probe_one

My previous patch fixed a link error for all at91 platforms when
CONFIG_ARM_CPU_SUSPEND was not set, however this caused another
problem on a configuration that enabled CONFIG_ARCH_AT91 but none
of the individual SoCs, and that also enabled CPU_ARM720 as
the only CPU:

warning: (ARCH_AT91 && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && SOC_IMX6 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM && EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE)
arch/arm/kernel/sleep.o: In function `cpu_resume':
(.text+0xf0): undefined reference to `cpu_arm720_suspend_size'
arch/arm/kernel/suspend.o: In function `__cpu_suspend_save':
suspend.c:(.text+0x134): undefined reference to `cpu_arm720_do_suspend'

This improves the hack some more by only selecting ARM_CPU_SUSPEND
for the part that requires it, and changing pm.c to drop the
contents of unused init functions so we no longer refer to
cpu_resume on at91 platforms that don't need it.

Fixes: cc7a938f

 ("ARM: at91: select CONFIG_ARM_CPU_SUSPEND")
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull ext4 fixes from Ted Ts'o:
 "Fix a clang build regression and an potential xattr corruption bug"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: add missing xattr hash update
  ext4: fix clang build regression

Pull MFD fix from Lee Jones:
 "Revert duplicate commit in da9062-core"

* tag 'mfd-fixes-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  Revert "mfd: da9061: Fix to remove BBAT_CONT register from chip model"

With 16KB pages and a kernel Image larger than 16MB, the current
kaslr_early_init() logic for avoiding mappings across swapper table
boundaries fails since increasing the offset by kimg_sz just moves the
problem to the next boundary.

This patch rounds the offset down to (1 << SWAPPER_TABLE_SHIFT) if the
Image crosses a PMD_SIZE boundary.

Fixes: afd0e5a8

 ("arm64: kaslr: Fix up the kernel image alignment")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

In the KASLR setup routine, we ensure that the early virtual mapping
of the kernel image does not cover more than a single table entry at
the level above the swapper block level, so that the assembler routines
involved in setting up this mapping can remain simple.

In this calculation we add the proposed KASLR offset to the values of
the _text and _end markers, and reject it if they would end up falling
in different swapper table sized windows.

However, when taking the addresses of _text and _end, the modulo offset
(the physical displacement modulo 2 MB) is already accounted for, and
so adding it again results in incorrect results. So disregard the modulo
offset from the calculation.

Fixes: 08cdac61

 ("arm64: relocatable: deal with physically misaligned ...")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

When there's a fatal signal pending, arm64's do_page_fault()
implementation returns 0. The intent is that we'll return to the
faulting userspace instruction, delivering the signal on the way.

However, if we take a fatal signal during fixing up a uaccess, this
results in a return to the faulting kernel instruction, which will be
instantly retried, resulting in the same fault being taken forever. As
the task never reaches userspace, the signal is not delivered, and the
task is left unkillable. While the task is stuck in this state, it can
inhibit the forward progress of the system.

To avoid this, we must ensure that when a fatal signal is pending, we
apply any necessary fixup for a faulting kernel instruction. Thus we
will return to an error path, and it is up to that code to make forward
progress towards delivering the fatal signal.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Steve Capper <steve.capper@arm.com>
Tested-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

There are some tricky dependencies between the different stages of
flushing the FPSIMD register state during exec, and these can race
with context switch in ways that can cause the old task's regs to
leak across.  In particular, a context switch during the memset() can
cause some of the task's old FPSIMD registers to reappear.

Disabling preemption for this small window would be no big deal for
performance: preemption is already disabled for similar scenarios
like updating the FPSIMD registers in sigreturn.

So, instead of rearranging things in ways that might swap existing
subtle bugs for new ones, this patch just disables preemption
around the FPSIMD state flushing so that races of this type can't
occur here.  This brings fpsimd_flush_thread() into line with other
code paths.

Cc: stable@vger.kernel.org
Fixes: 674c242c

 ("arm64: flush FP/SIMD state correctly after execve()")
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Merge tag 'at91-ab-4.13-drivers-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes

Pull "Driver fixes for 4.13" from Alexandre Belloni:

 - Multiple EBI/SMC timing setting/calculation fixes

* tag 'at91-ab-4.13-drivers-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  memory: atmel-ebi: Fix smc cycle xlate converter
  memory: atmel-ebi: Allow t_DF timings of zero ns
  memory: atmel-ebi: Fix smc timing return value evaluation

This patch was applied to the MFD twice, causing unwanted behavour.

This reverts commit b77eb79a.

Fixes: b77eb79a

 ("mfd: da9061: Fix to remove BBAT_CONT register from chip model")
Reported-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Pull sparc fixes from David Miller:
 "Just a couple small fixes, two of which have to do with gcc-7:

   1) Don't clobber kernel fixed registers in __multi4 libgcc helper.

   2) Fix a new uninitialized variable warning on sparc32 with gcc-7,
      from Thomas Petazzoni.

   3) Adjust pmd_t initializer on sparc32 to make gcc happy.

   4) If ATU isn't available, don't bark in the logs. From Tushar Dave"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: kernel/pcic: silence gcc 7.x warning in pcibios_fixup_bus()
  sparc64: remove unnecessary log message
  sparc64: Don't clibber fixed registers in __multi4.
  mm: add pmd_t initializer __pmd() to work around a GCC bug.

When building the kernel for Sparc using gcc 7.x, the build fails
with:

arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’:
arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
    cmd |= PCI_COMMAND_IO;
        ^~

The simplified code looks like this:

unsigned int cmd;
[...]
pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd);
[...]
cmd |= PCI_COMMAND_IO;

I.e, the code assumes that pcic_read_config() will always initialize
cmd. But it's not the case. Looking at pcic_read_config(), if
bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will
not be initialized.

As a simple fix, we initialize cmd to zero at the beginning of
pcibios_fixup_bus.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ARC fixes from Vineet Gupta:

 - PAE40 related updates

 - SLC errata for region ops

 - intc line masking by default

* tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  arc: Mask individual IRQ lines during core INTC init
  ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC
  ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses
  ARC: dma: implement dma_unmap_page and sg variant
  ARCv2: SLC: Make sure busy bit is set properly for region ops
  ARC: [plat-sim] Include this platform unconditionally
  ARC: [plat-axs10x]: prepare dts files for enabling PAE40 on axs103
  ARC: defconfig: Cleanup from old Kconfig options

Pull RTC fix from Alexandre Belloni:
 "Fix regmap configuration for ds1307"

* tag 'rtc-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: ds1307: fix regmap config

Pull networking fixes from David Miller:

 1) Fix IGMP handling wrt VRF, from David Ahern.

 2) Fix timer access to freed object in dccp, from Eric Dumazet.

 3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are
    triggerable by userspace. Also from Eric Dumazet.

 4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian
    King.

 5) Correct datagram peek handling of empty SKBs, from Matthew Dawson.

 6) Fix use after free in TIPC, from Eric Dumazet.

 7) When replacing a route in ipv6 we need to reset the round robin
    pointer, from Wei Wang.

 8) Fix bug in pci_find_pcie_root_port() which was unearthed by the
    relaxed ordering changes, from Thierry Redding. I made sure to get
    an explicit ACK from Bjorn this time around :-)

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
  ipv6: repair fib6 tree in failure case
  net_sched: fix order of queue length updates in qdisc_replace()...

This was reported many times, and this was even mentioned in commit
52ee2dfd

 ("pids: refactor vnr/nr_ns helpers to make them safe") but
somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is
not safe because task->group_leader points to nowhere after the exiting
task passes exit_notify(), rcu_read_lock() can not help.

We really need to change __unhash_process() to nullify group_leader,
parent, and real_parent, but this needs some cleanups.  Until then we
can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and
fix the problem.

Reported-by: Troy Kensinger <tkensinger@google.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Current max_register setting breaks reading nvram on certain chips and
also reading the standard registers on RX8130 where register map starts
at 0x10.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 11e5890b

 "rtc: ds1307: convert driver to regmap"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

knav_pool_create is an exported function. In the event of a call
before knav_queue_probe, we encounter a NULL pointer dereference
in the following line. Hence return -EPROBE_DEFER to the caller till
the kdev pointer is non-NULL.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

In fib6_add(), it is possible that fib6_add_1() picks an intermediate
node and sets the node's fn->leaf to NULL in order to add this new
route. However, if fib6_add_rt2node() fails to add the new
route for some reason, fn->leaf will be left as NULL and could
potentially cause crash when fn->leaf is accessed in fib6_locate().
This patch makes sure fib6_repair_tree() is called to properly repair
fn->leaf in the above failure case.

Here is the syzkaller reported general protection fault in fib6_locate:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000
RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline]
RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline]
RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline]
RIP: 0010:[<ffffffff82a3e0e1>]  [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233
RSP: 0018:ffff8801d01a36a8  EFLAGS: 00010202
RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000
RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100
RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001
R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000
FS:  00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
 ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0
 ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0
 ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988
Call Trace:
 [<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109
 [<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075
 [<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450
 [<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281
 [<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456
 [<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline]
 [<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232
 [<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778
 [<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline]
 [<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619
 [<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834
 [<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478
 [<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491
 [<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538
 [<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline]
 [<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577
 [<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17

Note: there is no "Fixes" tag as this seems to be a bug introduced
very early.

Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This important to call qdisc_tree_reduce_backlog() after changing queue
length. Parent qdisc should deactivate class in ->qlen_notify() called from
qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero.

Missed class deactivations leads to crashes/warnings at picking packets
from empty qdisc and corrupting state at reactivating this class in future.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 86a7996c

 ("net_sched: introduce qdisc_replace() helper")
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Two typos in switchdev.txt

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Looks like this was accidentally missed, so still add s390x
as supported eBPF JIT arch to bpf_jit_enable.

Fixes: 014cd0a3

 ("bpf: Update sysctl documentation to list all supported architectures")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'move_paghes()' system call was introduced long long ago with the
same permission checks as for sending a signal (except using
CAP_SYS_NICE instead of CAP_SYS_KILL for the overriding capability).

That turns out to not be a great choice - while the system call really
only moves physical page allocations around (and you need other
capabilities to do a lot of it), you can check the return value to map
out some the virtual address choices and defeat ASLR of a binary that
still shares your uid.

So change the access checks to the more common 'ptrace_may_access()'
model instead.

This tightens the access checks for the uid, and also effectively
changes the CAP_SYS_NICE check to CAP_SYS_PTRACE, but it's unlikely that
anybody really _uses_ this legacy system call any more (we hav ebetter
NUMA placement models these days), so I expect nobody to notice.

Famous last words.

Reported-by: Otto Ebeling <otto.ebeling@iki.fi>
Acked-by: Eric W. Biederman <ebiederm@xmission.c...>

Pull x86 fixes from Thomas Gleixner:
 "Another pile of small fixes and updates for x86:

   - Plug a hole in the SMAP implementation which misses to clear AC on
     NMI entry

   - Fix the norandmaps/ADDR_NO_RANDOMIZE logic so the command line
     parameter works correctly again

   - Use the proper accessor in the startup64 code for next_early_pgt to
     prevent accessing of invalid addresses and faulting in the early
     boot code.

   - Prevent CPU hotplug lock recursion in the MTRR code

   - Unbreak CPU0 hotplugging

   - Rename overly long CPUID bits which got introduced in this cycle

   - Two commits which mark data 'const' and restrict the scope of data
     and functions to file scope by making them 'static'"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Constify attribute_group structures
  x86/boot/64/clang: Use fixup_pointer() to access 'next_early_pgt'...

Pull timer fixes from Thomas Gleixner:
 "A few small fixes for timer drivers:

   - Prevent infinite recursion in the arm architected timer driver with
     ftrace

   - Propagate error codes to the caller in case of failure in EM STI
     driver

   - Adjust a bogus loop iteration in the arm architected timer driver

   - Add a missing Kconfig dependency to the pistachio clocksource to
     prevent build failures

   - Correctly check for IS_ERR() instead of NULL in the shared timer-of
     code"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/arm_arch_timer: Avoid infinite recursion when ftrace is enabled
  clocksource/drivers/Kconfig: Fix CLKSRC_PISTACHIO dependencies
  clocksource/drivers/timer-of: Checking for IS_ERR() instead of NULL
  clocksource/drivers/em_sti: Fix error return codes in em_sti_probe()
  clocksource/drivers/arm_arch_timer: Fix mem frame loop initialization

Pull perf fixes from Thomas Gleixner:
 "Two fixes for the perf subsystem:

   - Fix an inconsistency of RDPMC mm struct tagging across exec() which
     causes RDPMC to fault.

   - Correct the timestamp mechanics across IOC_DISABLE/ENABLE which
     causes incorrect timestamps and total time calculations"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix time on IOC_ENABLE
  perf/x86: Fix RDPMC vs. mm_struct tracking

Pull irq fixes from Thomas Gleixner:
 "A pile of smallish changes all over the place:

   - Add a missing ISB in the GIC V1 driver

   - Remove an ACPI version check in the GIC V3 ITS driver

   - Add the missing irq_pm_shutdown function for BRCMSTB-L2 to avoid
     spurious wakeups

   - Remove the artifical limitation of ITS instances to the number of
     NUMA nodes which prevents utilizing the ITS hardware correctly

   - Prevent a infinite parsing loop in the GIC-V3 ITS/MSI code

   - Honour the force affinity argument in the GIC-V3 driver which is
     required to make perf work correctly

   - Correctly report allocation failures in GIC-V2/V3 to avoid using
     half allocated and initialized interrupts.

   - Fixup checks against nr_cpu_ids in the generic IPI code"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/ipi: Fixup checks against nr_cpu_ids
  genirq: Restore trigger settings in irq_modify_status()
  MAINTAINERS: Remove Jason Cooper's irqchip git tree
  irqchip/gic-v3-its-platform-msi: Fix msi-parent parsing loop
  irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES
  irqchip: brcmstb-l2: Define an irq_pm_shutdown function
  irqchip/gic: Ensure we have an ISB between ack and ->handle_irq
  irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA
  irqchip/gic-v3: Honor forced affinity setting
  irqchip/gic-v3: Report failures in gic_irq_domain_alloc
  irqchip/gic-v2: Report failures in gic_irq_domain_alloc
  irqchip/atmel-aic: Remove root argument from ->fixup() prototype
  irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup()
  irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()

Pull watchdog fix from Thomas Gleixner:
 "A fix for the hardlockup watchdog to prevent false positives with
  extreme Turbo-Modes which make the perf/NMI watchdog fire faster than
  the hrtimer which is used to verify.

  Slightly larger than the minimal fix, which just would increase the
  hrtimer frequency, but comes with extra overhead of more watchdog
  timer interrupts and thread wakeups for all users.

  With this change we restrict the overhead to the extreme Turbo-Mode
  systems"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kernel/watchdog: Prevent false positives with turbo modes