aboutsummaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2014-09-22Support hla_serial command for ST-LINK adapters.Austin Phillips1-1/+5
The hla_serial command allows for a programming device serial number to be specified in addition to USB VID/PID. This allows for multiple ST-LINK/V2 programmers to be attached to a single machine and operated using openocd. Change-Id: I350654bf676eb26ba3a90450acfa55d2a5d2d791 Signed-off-by: Austin Phillips <austin_phillips@hotmail.com> Reviewed-on: http://openocd.zylin.com/2198 Tested-by: jenkins Reviewed-by: Martin Glunz <mg@wunderkis.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-28jtag/drivers/ftdi: add option to declare signal aliasesPaul Fertser1-1/+5
This adds -alias|-nalias options to ftdi_layout_signal command that allow to declare a new signal based on an already defined one. Change-Id: I552578ebcd12ae21957a1c0d3b7e878adeff6df0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2181 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01Flash/LPC2000: Add support for auto-probing flash sizeCosmin Gorgovan1-1/+3
Adds support for auto-probing on devices which support the IAP Read Part ID command. Includes IDs for all LPC17XX, LPC13XX, LPC11XX and LPC11XXX devices with publicly available user manuals. To use auto-probing, select the 'auto' lpc2000 variant. Change-Id: Ic617c32925c9ebe0e9d9192ed8ddbfa08e9f0aaa Signed-off-by: Cosmin Gorgovan <cosmin@linux-geek.org> Reviewed-on: http://openocd.zylin.com/2075 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-01Flash/LPC2000: Add support for LPC11(x)xx, LPC13xxCosmin Gorgovan1-4/+6
LPC11(x)xx and LPC13xx devices are mostly compatible with the lpc1700 variant of the LPC2000 driver, but use a fixed flash sector size of 4KB. Change-Id: I033515f4ff6bc61d3b9babd27096f78c99cea927 Signed-off-by: Cosmin Gorgovan <cosmin@linux-geek.org> Reviewed-on: http://openocd.zylin.com/2071 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-05-05doc: document [start end] parameters of "profile" commandPaul Fertser1-2/+4
Change-Id: I56561b08304e5b854a67b06ab6b9cee7a24919b2 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2115 Tested-by: jenkins
2014-03-29tcl: introduce init_target_events and use it for gdb flashing eventsPaul Fertser1-2/+14
This introduces a new global Tcl procedure that is run just after init_targets and before init_boards. Its default behaviour is to assign gdb-flash-erase-start and gdb-flash-write-end to reasonable defaults. The rationale for doing "reset init" before gdb erases and flashes memory is that all flash drivers are written in assumption that they can safely be used only after chip reset (plus chip-specific configuration in the init handler if any). The need to use "reset halt" after flashing is because a user expects running firmware after loading to be the same as running it from power-on-reset. Change-Id: I9ddc4047611904ca4ca779b73376d2739611948a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2062 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29doc: add "manual/" directory in its entirety to distPaul Fertser1-8/+1
Change-Id: I750c2938ab207012a6488bf34f55d784e5e26b6e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1903 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17openocd.texi: document Tcl RPC and add an example clientPaul Fertser1-1/+29
This should provide enough information to start using OpenOCD RPC. I've seen some other example clients in different languages but I can't find them anymore, and their legal status was unclear. Change-Id: I3a95fe361d773040d1e52a62f9cc0cc655019a9f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1915 Tested-by: jenkins Reviewed-by: Andreas Ortmann <ortmann@finf.uni-hannover.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-07Rename and sort udev rules fileAndreas Fritiofson1-1/+3
Also add missing entries for JTAG-lock-pick Tiny 2, Xverve Signalyzer LITE and default FTDI VID:PIDs. Change-Id: I41b4f15409642298d1cf134d1f8014dc8f003005 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1969 Tested-by: jenkins
2014-02-24nrf51: Implement the support for Nordic's nRF51 devicesAndrey Smirnov1-0/+17
Add support for Nordic's nRF51 chip series. Tested with nRF51822. Change-Id: Id70f6fd76888cc595a353aefb84d25c4cd325d7d Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1945 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-11quark_x10xx: add new target quark_x10xxAdrian Burns1-3/+44
Intel Quark X10xx SoC debug support added Lakemont version 1 (LMT1) is the x86 core in Quark X10xx SoC Generic x86 32-bit code is in x86_32_common.c/h Change-Id: If2bf77275cd0277a82558cd9895b4c66155cf368 Signed-off-by: adrian.burns@intel.com Reviewed-on: http://openocd.zylin.com/1829 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-04doc: add missing reg command argument 'force'Spencer Oliver1-1/+3
The argument 'force' enables a user to bypass the internal cache and read a target register directly. However it is missing from the user guide. Change-Id: I26f689eec20b38a0dc5294626b25df566b554446 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1897 Tested-by: jenkins
2014-02-04doc: update CMSIS-DAP info to match default driver behaviourSpencer Oliver1-2/+2
By default the driver will now auto detect attached adapters, it does not use an internal list any more. Update docs to match this. Change-Id: I62a9d243cd236a8cf54cbd9d088c4837a8df31bf Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1902 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-01-20doc: Add Gerrit to the Developer resources sectionAndreas Fritiofson1-4/+19
Change-Id: Icbf2050967cea06b05a09574a6a91ce1407a489f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1885 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-15Grammatical cleanup to Tcl Scripting chapter of User's GuideRobert P. J. Day1-18/+27
Changes solely to the Tcl Scripting API chapter of the UG: * Some grammatical cleanup * Fix formatting issues (@example and @verbatim formatting) * Add references to missing OSes OpenBSD, NetBSD and eCos. Change-Id: I3ec1a192a0b1e0a207dceb76fd39008d01e287a5 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1872 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11A few more grammar and typo fixes from the User's Guide.Robert P. J. Day1-9/+9
More cleanup from some of the later chapters from the User's Guide, no functional changes. Change-Id: Ib2860fc2574503e8107935d79db45fa96014fe3a Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1863 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11Remove obsolete tip referring to 2010 removal of TAP numbers.Robert P. J. Day1-11/+0
Remove a tip describing the discouraged use of TAP numbers, and how these numbers would be removed by mid-2010. Change-Id: Iebe7e2e4a0f8e1f18a91d7935588dd9ced2b398d Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1862 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11Proofreading, typo and grammar fixes to Ch 10 User's Guide.Robert P. J. Day1-22/+22
Various cleanups to Chapter 10 of the User's Guide, no functional changes. Change-Id: I055d032eacc8e85b1d8edbd4bcc505f6f0feaa49 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1861 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11Some minor URL fixes and typo fixes, no functional changes.Robert P. J. Day1-7/+7
Change-Id: Ib262d9e6330c35d26868942b821de7b53e00b854 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1859 Tested-by: jenkins Reviewed-by: Bill Traynor <btraynor@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09cmsis-dap: add initial cmsis-dap supportSpencer Oliver1-0/+26
This is based on work from: https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap Main changes include moving over to using HIDAPI rather than libusb-1.0 and cleaning up to merge into master. Support for reset using srst has also been added. It has been tested on all the mbed boards as well as the Freedom board from Freescale. These boards only implement SWD mode, however JTAG mode has been tested with a Keil ULINK2 and a stm32 target - but requires a lot more work. Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1542 Tested-by: jenkins
2014-01-08tools: add firmware recovery helpersPaul Fertser1-0/+11
This adds a set of helper functions with the aim to make it possible to flash mass-market devices without RTFMing altogether (i.e. to obsolete GPL-violating proprietary tjtag and other similar software). Real-life tested on an RT-N16 and WRT54GL. Change-Id: I197a9b28a5f386803f081057c4b4ebf2f9c447b1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1850 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08Numerous pedantic fixes to the User's Guide, including typo fixes,Robert P. J. Day1-51/+53
grammar fixes and so on. Change-Id: Iaeb603447ecd9f77f1d49ce77044431442f4f219 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1855 Reviewed-by: Bill Traynor <btraynor@gmail.com> Tested-by: jenkins Reviewed-by: Francois Lorrain <francois.lorrain@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22stlink: remove stlink_api commandMathias K1-4/+0
Remove stlink_api command. Change-Id: I8f7885d3756fec462f9ebbee2ed285a98a51366c Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1760 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14topic: Support for the Xilinx BSCAN_* Virtual JTAG in OpenriscSergio Chico1-3/+4
This add support to the Xilinx BSCAN_* virtual JTAG interface. This is the Xilinx equivalent of the Altera sld_virtual_jtag interface, it allows a user to connect to the debug unit through the main FPGA JTAG connection. Change-Id: Ia438e910650cff9cbc8f810b719fc1d5de5a8188 Signed-off-by: Sergio Chico <sergio.chico@gmail.com> Reviewed-on: http://openocd.zylin.com/1806 Tested-by: jenkins Reviewed-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-29hla/stlink: Re-order trace parameters to allow trace output file to be optionalJames G. Smith1-5/+5
Re-order the "trace" parameters to allow the raw capture (log) file to be an optional feature. The clock frequency for calculating the "Async Clock Prescalar" is always required when enabling trace processing and is now the first "required" parameter. The ST-Link driver is updated to use the (required parameter) "trace_source_hz" non-zero value as the indicator of trace being required, rather than the now optional output file descriptor being non-NULL. Background: This patch is groundwork for extending the OpenOCD SWO capture to implement other (OpenOCD built-in) ITM/DWT processing where the core trace support is required, but there is no requirement to store raw trace data to a configured host file. By itself this patch is almost a functional NOP, since without the other processing in place there is no reason NOT to specify a capture file. Change-Id: Ibc385dd0a7adaf9bd652bceded27262fef35fd59 Signed-off-by: James G. Smith <jsmith@ecoscentric.com> Reviewed-on: http://openocd.zylin.com/1660 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-29tcl: add memory testing functions for board diagnosticsPaul Fertser1-0/+48
This is a tcl implementation of public domain tests by Michael Barr, http://www.barrgroup.com/Embedded-Systems/How-To/Memory-Test-Suite-C The initial porting is done by Shane Volpe and posted to the mailing list: http://www.mail-archive.com/openocd-development@lists.berlios.de/msg16676.html This patch includes some cosmetic amendments plus hardcodes 32bit word size (as the code depends on memread32/memwrite32 anyway) which fixes original code's issue of testing only the first quarter of the specified nBytes. Change-Id: I5f3a66f1f16fc4082c7a5a6aba338430646ed21c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1455 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2013-10-07flash: add padded_value cmdSpencer Oliver1-0/+6
This adds support for setting the default value used when padding image sections. Previously 0xff was used but some targets have an erased value of 0x00. Change-Id: If3df6fea3abf95b09daa3ff7be362acf991070ce Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1635 Tested-by: jenkins
2013-09-26Add new target type: OpenRISCFranck Jullien1-0/+56
Add support for OpenRISC target. This implementation supports the adv_debug_sys debug unit core. The mohor dbg_if is not supported. Support for mohor TAP core and Altera Virtual JTAG core are also provided. Change-Id: I3b1cfab1bbb28e497c4fca6ed1bd3a4362609b72 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1547 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-25doc: correctly terminate @xrefSpencer Oliver1-1/+1
@xref should be terminated by either a ',' or '.'. Change-Id: I141335cd4e149992fc971c6f2c04f1dbe390c8f4 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1637 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-09-08jtag: drivers: Add JTAP VPI client driverFranck Jullien1-0/+4
This patch adds a driver for the jtag_vpi server [1]. This server is now part of the ORPSoC version 3 (OpenRISC Reference Platform SoC). The jtag_vpi server provides an interface between OpenOCD and a simulated core. [1] http://github.com/fjullien/jtag_vpi Change-Id: I717b72cace4845f66c878581345074f99002e21a Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1609 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-29docs: add RTOS Support infoSpencer Oliver1-1/+54
Currently we have very little info about the RTOS support. This should improve that. We also add info about what symbols are required for each supported RTOS. This can be a trap, certainly when trying to use FreeRTOS support. Change-Id: Ie57858571daca97515292ff5738a5a5ef55655b7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1538 Tested-by: jenkins
2013-08-29Added new ftdi interface devicePushpal Sidhu1-11/+11
Added new configuration file for gw16042 device. Also added this to interface/ftdi examples in documentation. Change-Id: I07bb10bfc79a5d13007288cd57f254d889075214 Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> Reviewed-on: http://openocd.zylin.com/1563 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-29doc: Add gdb target description commandsFranck Jullien1-0/+11
Change-Id: Ie74917082e894cfa8ee2258f7a8cdf7d58ee4a59 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1552 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-19doc: update GW16042 hardware informationPushpal Sidhu1-4/+5
Fixed a typo in device name as well updated device URL. Also fixed miscategorization and moved it to USB FT2232 Based section. Change-Id: Ia3acaed4209eff26244efea8db68046143ecea37 Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> Reviewed-on: http://openocd.zylin.com/1553 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-07docs: remove mixed case typoSpencer Oliver1-1/+1
Change-Id: Iae40c59ed21e72931d440814d112b3cd752aad9c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1540 Tested-by: jenkins
2013-08-07stlink: add SWO tracing supportAndrey Yurovsky1-0/+7
Enable reading the SWO trace output via STLinkv2 dongles that support it. This adds an optional initialization parameter "trace" with which the user specifies a destination file where SWO trace output is appended as it comes in as well as the trace module's source clock rate. STLink will be configured for a 2MHz SWO data rate (STLink's highest supported rate) if the source clock is > 2MHz, otherwise the source clock is used as the data rate directly. For example: trace swo.log 168000000 If "trace" is specified with a usable file path, the stlink_usb driver will attempt to configure and read SWO trace data as follows: - on _run(), the target's TPI and TMI are configured and the STLinkv2 is told to enable tracing. Only generic ARM TPI and TMI registers are configured, any MCU-specific settings (ex: pin routing) are the responsibility of the target firmware. The configuration applied is based on the STLinkv2's capabilities (UART emulation). - on _v2_get_status(), the trace data (if any) is fetched from the STLink after the target status is checked and the target is found to be running. - on _halt(), the STLink is told to disable tracing. When fetching trace data, the entire trace frame is written to the output file and that data is flushed. An external tool may be used to parse the trace data into a more human-readable format. Tested on ARM Cortex M4F and M3 MCUs (STM32F407 and STM32L152). Change-Id: Ic3983d46c82ba77010c23b0e18ce7b275d917f12 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1524 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-08-01docs: add missing embKernel rtos arg to docsSpencer Oliver1-1/+1
Change-Id: Ib304a2bf272d281f6cd124ffca95b32531d57899 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1529 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-07-15configure: remove AM_MAINTAINER_MODE, effectively always enabling all the rulesPaul Fertser1-20/+0
There're strong arguments against using this macro (mostly regarding build consistency), so remove it altogether. Change-Id: I90c8e9a86a24571019366435bd868a6799a09c45 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1476 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-01doxygen: use inline jtag state maching imageSpencer Oliver2-2/+1
The currently used image is 404 so use an inline image instead. Change-Id: I56a0d187fd06dc2c5c370e6532d89815ccec63d6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1451 Tested-by: jenkins
2013-06-10Add BCM2835 (as found in Raspberry Pi) interface driverPaul Fertser1-0/+19
This adds support for JTAG programming by bitbanging GPIOs exposed on the RaspberryPi's expansion header. Tested by connecting directly to an STM32VLDiscovery board, without any additional circuity. I observed maximum about 4MHz on the TCK pin with an old analogue 'scope and about 100kHz when setting the speed to 100kHz. Busyloop waiting is needed because even with a single 0ns nanosleep call (with FIFO priority) it lowers the TCK speed to ~30kHz which is way too low to be useful. The speed testing with adapter_khz 2000 gave the following results: sudo chrt -f 1 nice -n -19 ./src/openocd \ -f interface/raspberrypi-native.cfg \ -c "set WORKAREASIZE 0x2000" \ -f target/stm32f1x.cfg -c "adapter_khz 2000" wrote 131072 bytes from file random.bin in 3.973677s (32.212 KiB/s) dumped 131072 bytes in 1.445699s (88.538 KiB/s) This is 3.7 times faster for writing and 14.3 times faster for reading compared to the generic sysfsgpio driver; probably the writing speed is limited by the target itself here and reading speed might be considerably higher too with appropriate connection and a capable target. BCM2835 name is choosen over BCM2708 because the published peripherals datasheet uses the particular model name and not family name. Change-Id: Ib78168be27f53c2a3c88c3dd8154d1190c318c78 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/758 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-30user guide: Update the ZY1000 description.William M.A. Traynor1-5/+17
As per request from Peter at Ultimate Solutions, updated the description of the ZY100 Stand-alone JTAG probe. Signed-off-by: Bill Traynor <wmat@alphatroop.com> Change-Id: Ia5c0b9a7261becd524a02aba1b22a98a2e09a4c9 Signed-off-by: William M.A. Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/1357 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-02doc: add info about FT232H and JTAG-lock-pick Tiny 2 adapterFreddie Chopin1-2/+6
Change-Id: I3b1047580669da3f17ea87183536275a10671fec Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1367 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-02doc: Update list of interfaces, targets and boardsFreddie Chopin1-151/+189
Change-Id: If9481e061f09a37f9ee3c461a1a0ce4d382a9a0d Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1366 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-02dev-doc: fix to release process docsFreddie Chopin1-2/+2
Change-Id: I916e7ff1af211baef1c6d56fd44d292ee6983599 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1368 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-04-28target: rename cortex_a8 to cortex_aSpencer Oliver1-13/+13
Rename cortex_a8 target to use a more correct cortex_a name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: I0eb1429c9281321efeb444b27a662a941a2ab67f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1130 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28target: rename cortex_m3 to cortex_mSpencer Oliver1-15/+15
Rename cortex_m3 target to use a more correct cortex_m name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: Ia8429f38e88da677249c5caa560c50f8ce56ea10 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1129 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28Mention "lpc4300" (with "lpc1800" alias) flash drivers in manualFreddie Chopin1-6/+9
Change-Id: I0bb28910b2c07b1ca5bd644e0d88b931d585d3e7 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1352 Tested-by: jenkins
2013-04-11arm_adi_v5: fix for csw nonsecure access.Michel JAOUEN1-0/+5
Add command to fix CSW_SPROT in register AP_CSW. This solves dap apmem access in non secure access. Change-Id: I7cfcb6434d75f5cfd4a2630a059901cdeea010ce Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-on: http://openocd.zylin.com/1276 Tested-by: jenkins Reviewed-by: mike brown Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-28docs: update incorrect urlsSpencer Oliver2-4/+6
These were missed when git was moved to the new SF platform during Nov 2012. Change-Id: I7b4ae9dea010d95f9bf4c26841b5b724f41768be Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1248 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2013-03-28docs: remove unnecessary whitespaceSpencer Oliver1-234/+234
Change-Id: I11bad3de145d941b61e9bd4920bc3281ece91ab3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1245 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
generated by cgit v1.1 at 2024-10-12 15:16:05 +0000