aboutsummaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2022-06-24target: add Espressif ESP32-S3 basic supportErhan Kurubas1-0/+1
ESP32-S3 is a dual core Xtensa SoC Not full featured yet. Some of the missing functionality: -Semihosting -Flash breakpoints -Flash loader -Apptrace -FreeRTOS Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I44e17088030c96a9be9809f6579a4f16dbfc5794 Reviewed-on: https://review.openocd.org/c/openocd/+/6990 Tested-by: jenkins Reviewed-by: Ian Thompson <ianst@cadence.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-06-24target: add Espressif ESP32 basic supportErhan Kurubas1-0/+1
ESP32 is a dual core Xtensa SoC Not full featured yet. Some of the missing functionality: -Semihosting -Flash breakpoints -Flash loader -Apptrace -FreeRTOS Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I76fb184aa38ab9f4e30290c038b5ff8850060750 Reviewed-on: https://review.openocd.org/c/openocd/+/6989 Tested-by: jenkins Reviewed-by: Ian Thompson <ianst@cadence.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-06-24arm_adi_v5: add option 'root' to 'dap info' commandAntonio Borneo1-2/+4
On ADIv6 the system root ROM table is found by reading the DAP DP registers BASEPTR0 and BASEPTR1. Add option 'root' to the commands 'dap info' to let it retrieve the system root ROM table's AP from DAP DP, then use such AP for following dump. Change-Id: I1789457a005faa3870c5d14f763378d2f6a5f095 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6462 Tested-by: jenkins
2022-06-24adiv6: use struct adiv5_ap->ap_num to contain the AP base addressAntonio Borneo1-5/+22
ADIv5 DAP can only have 256 AP, while ADIv6 can provide till 2**40 (1,099,511,627,776) AP per DAP. Reuse the field ap_num in struct adiv5_ap, currently used on ADIv5 to hold the ADIv5 AP number (apsel), to contain the ADIv6 AP base address. Convert struct adiv5_ap->ap_num to 64 bit and initialize it to DP_APSEL_INVALID for unused AP. Restrict dap_find_get_ap() to ADIv5 only. To be enhanced. On ADIv6, let dap_get_ap() return an already allocated AP, or allocate and return an unused AP. Add function is_ap_num_valid() and use it. Change-Id: Ib2fe8c7ec0d08393cd91c29fdac5d632dfc1e438 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6461 Reviewed-by: Daniel Goehring <dgoehrin@os.amperecomputing.com> Tested-by: jenkins
2022-06-24adiv6: add dap flags -adiv5 and -adiv6Kevin Burke1-1/+5
Add flags to 'dap create' command and set the field adi_version in struct adiv5_dap. Actually only ADIv5 is functional. Other patches are needed to get ADIv6 working. Split from change https://review.openocd.org/6077/ Change-Id: I63d3902f99a7f139c15ee4e07c19eae9ed4534b9 Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com> Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com> Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6456 Tested-by: jenkins
2022-06-04target: add Espressif ESP32-S2 basic supportErhan Kurubas1-0/+89
ESP32-S2 is a single core Xtensa chip. Not full featured yet. Some of the missing functionality: -Semihosting -Flash breakpoints -Flash loader -Apptrace -FreeRTOS Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I2fb32978e801af5aa21616c581691406ad7cd6bb Reviewed-on: https://review.openocd.org/c/openocd/+/6940 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Ian Thompson <ianst@cadence.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2022-05-21semihosting: add semihosting_basedir commandErhan Kurubas1-0/+6
This command allows users to set base working directory for the semihosting I/O operations.Default is the current OpenOCD directory. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: I80c5979e4c96d66cccdd12cc6fcd5f353e5c6b4d Reviewed-on: https://review.openocd.org/c/openocd/+/6888 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-14doc: Document linuxgpiod driver commandsSteve Marple1-1/+78
Change-Id: I84ad5dba9ab2099137595b46822bc10a0b089524 Signed-off-by: Steve Marple <stevemarple@googlemail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6962 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-14drivers/am335xgpio: Add AM335x driver for bitbang support on BeagleBonesSteve Marple1-0/+95
Change-Id: Iac1c9f3d380e2474c8b77407c89c2aad96fbf2ea Signed-off-by: Steve Marple <stevemarple@googlemail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6941 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-14openocd: add post-init and pre-shutdown helpersAntonio Borneo1-10/+20
It is a common requirement to automatically execute some command after "init". This can be achieved, either in scripts or through OpenOCD command line, by explicitly calling "init" followed by the commands. But this approach fails if the request for post-init commands is spread across configuration files; only one of the files can split pre-init and post-init status by calling "init". The common workaround is to "rename" the command "init" and replace it with a TCL proc that calls the original "init" and the post-init commands. E.g. in Zephyr script [1]. To simplify and formalize the post-init execution, use a TCL list that contains the list of commands to be executed. Every script can contribute adding new commands, e.g. using "lappend". In the same way, formalize the pre-shutdown execution with a TCL list of user commands to be executed before OpenOCD exit. Document them and add trivial examples. Drop from documentation the suggestion to rename "shutdown". Change-Id: I9464fb40ccede3e7760d425873adca363b49a64f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Link: [1] https://github.com/zephyrproject-rtos/zephyr/blob/zephyr-v2.7.1/boards/arm/nucleo_h743zi/support/openocd.cfg#L15 Reviewed-on: https://review.openocd.org/c/openocd/+/6851 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2022-05-07doc: fix typo s/Not/Note/Piotr Kasprzyk1-1/+1
Append lacking e to word Note Signed-off-by: Piotr Kasprzyk <ciri@ciri.pl> Change-Id: Ibd40a2f93d11cf1945361f0c46329b88963d6826 Reviewed-on: https://review.openocd.org/c/openocd/+/6963 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-07bluenrg: add support for bluenrg-lps device and boardSalvatore Giorgio PECORINO1-1/+1
Added bluenrg-lps support Added file for the board steval-idb012v1 Fixed size_info information using a mask Changed the if condition in bluenrg-x.cfg to be valid only for bluenrg-1 and bluenrg-2 Signed-off-by: Salvatore Giorgio PECORINO <salvatore-giorgio.pecorino@st.com> Change-Id: Ic0777ec0811ee6fac7d5e1d065c4629e47d84a1f Reviewed-on: https://review.openocd.org/c/openocd/+/6928 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-05-07smp: deprecate legacy SMP core switching supportAntonio Borneo1-51/+0
The deprecation was already in the documentation since v0.11.0 through commit 85ba2dc4c6ab ("rtos/hwthread: add hardware-thread pseudo rtos") but OpenOCD was not informing the user printing a runtime message. Remove the deprecated method from the documentation and print a deprecated message at runtime. There is no reliable way to print the same message in GDB console, so we have to rely on user noticing it in the OpenOCD log. Target is to remove the functionality after v0.12.0. Change-Id: Idd2d9e3b6eccc92dcf0432c3c7de2f8a0fcabe9f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6862 Tested-by: jenkins
2022-04-24flash/stm32f1x: add support for RISC-V GigaDevice GD32VF103Tomas Vanek1-0/+1
The device has compatible flash macro with STM32F1 family, reuse stm32f1x driver code. Detect non-ARM target - for simplicy test target type name 'riscv' and the address has 32 bits. In case of RISC-V CPU use simple chunked write algo - async algo cannot be used as the core implemented in this device doesn't allow memory access while running. Change-Id: Ie3886fbd8573652691f91a02335812a7300689f7 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/6704 Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com>
2022-04-23nds32: deprecate it, together with aice adapter driverAntonio Borneo1-3/+3
The target nds32 and its companion adapter aice have not received any real improvement since 2013. It has been hard to keep them aligned during the evolution of OpenOCD code, with no way for maintainers to really check if they are still working. No real documentation is present for them in OpenOCD. The arch nds32 has been dropped from Linux kernel v5.18-rc1. Deprecate both nds32 target and aice adapter with the target of dropping them for v0.13.0. Remove automatic build of aice, forcing user to select it. Change-Id: Ib465d676246fa3b4e95c3d399ba9a5cf1f8b3baf Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6887 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2022-03-19semihosting: permit redirection of semihosting I/O to TCPTarek BOCHKATI1-0/+11
This command permits the usage of a TCP port to perform debug and stdio operations: - debug : READC, WRITEC and WRITE0 - stdio : READ, WRITE This will permit the separation of semihosting message from OpenOCD log, and separate semihosting messages per core. syntax: arm semihosting_redirect (disable | tcp <port> [debug|stdio|all]) this allows to select which operations to be performed via TCP (debug, stdio or all (default)). Note: for stdio operations, only I/O from/to ':tt' file descriptors are redirected. tested using netcat on ubuntu Change-Id: I37053463667ba109d52429d4f98bc98d0ede298d Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/5562 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12target: Deprecate 'array2mem' and 'mem2array''Marc Schink1-34/+5
Replace 'mem2array' and 'array2mem' with a Tcl wrapper that internally uses 'read_memory' and 'write_memory'. The target-specific 'mem2array' and 'array2mem' functions remain for now. Change-Id: If24c22a76ac72d4c26916a95f7f17902b41b6d9e Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/6308 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-12target/tcl: Add 'read_memory' and 'write_memory'Marc Schink1-0/+78
These functions are meant as replacement for 'mem2array' and 'array2mem'. The main benefits of these new functions are: * They do not use Tcl arrays but lists which makes it easier to parse (generate) the data. See the Python Tcl RPC code in contrib as a negative example. * They do not operate on Tcl variables but instead return (accept) the Tcl list directly. This makes the C and Tcl code base smaller and cleaner. * The code is slightly more performant when reading / writing large amount of data. Tested with a simple Python Tcl RPC benchmark. Change-Id: Ibd6ece3360c0d002abaadc37f078b10a8bb606f8 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/6307 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-05target/tcl: Add get_reg functionMarc Schink1-0/+36
Change-Id: Id1be9554d1df2c07cec3161a0fd3a586fdf18246 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/5312 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-03-05target/tcl: Add set_reg functionMarc Schink1-0/+30
Change-Id: I97a01b93046cb7af289792489f77f5580312585a Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: https://review.openocd.org/c/openocd/+/5313 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-02-14Cadence virtual debug interface (vdebug) integrationJacek Wuwer1-0/+41
Change-Id: I1bc105b3addc3f34161c2356c482ff3011e3f2cc Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6097 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: zapb <dev@zapb.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-02-05semihosting: User defined operation, Tcl command exec on hostZoltán Dudás1-0/+27
Enabling a portion (0x100 - 0x107) of the user defined semihosting operation number range (0x100 - 0x1FF) to be processed with the help of the existing target event mechanism, to implement a general-purpose Tcl interface for the target available on the host, via semihosting interface. Example usage: - The user configures a Tcl command as a callback for one of the newly defined events (semihosting-user-cmd-0x10X) in the configuration file. - The target can make a semihosting call with <opnum>, passing optional parameters for the call. If there is no callback registered to the user defined operation number, nothing happens. Example usage: Configure RTT automatically with the exact, linked control block location from target. Signed-off-by: Zoltán Dudás <zedudi@gmail.com> Change-Id: I10e1784b1fecd4e630d78df81cb44bf1aa2fc247 Reviewed-on: https://review.openocd.org/c/openocd/+/6748 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2022-01-22jtag: Add an option to ignore the bypass bitAdrien Grassein1-0/+4
Some CPU wrongly indicate the bypas bit in the codeid. It's the case of the NanoXplore NG-ULTRA chip that export a configurable (and potentially invalid) ID for one of its component. Add an option to ignore it. Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com> Change-Id: Ic59743f23bfc4d4e23da0e8535fec8ca9e87ff1a Reviewed-on: https://review.openocd.org/c/openocd/+/6802 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2022-01-22doc: use the new jimtcl syntax for 'expr'Antonio Borneo2-12/+14
With jimtcl 0.81 the syntax of the TCL command 'expr' requires the multiple arguments to be within curly brackets. Update the examples in the documentation to follow the new syntax. While there, split one example to avoid it to exceed the line size during pdf document generation. Change-Id: I91cca419f8273415ccb0c2ce369fc6ac476e34e5 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6809 Tested-by: jenkins
2022-01-05flash/nor/efr32: fixed lockbits and user dataDoug Brunner1-3/+12
Changed flash driver to support writing to the user data page, as well as to any portion of the lockbits page above 512 bytes (the amount used for the actual page lock words). The top part of the lockbits page is used on at least the EFR32xG1 chips for the SiLabs bootloader encryption keys. As presented to the user, the lockbits page is the same size as the other pages, but any attempt to write to its low 512 bytes is an error. To enforce this, efr32x_write is renamed to efm32x_priv_write and a wrapper function is provided in its place. If the user erases the lockbits page, the driver rewrites the cached lock words after the erase. When the driver erases the lockbits page in order to update the lock words, it first takes a copy of anything stored in the top part of the page, and re-programs it after the erase operation. There are now multiple instances of flash_bank for each target, and the flash_bank instances must share their cached lock words to operate as intended. Therefore, when a bank is created, the global flash bank list is used to find any other banks that share the same target. Since some banks in the global list are invalid at the time free_driver_priv is called, reference counting is used to decide when to free driver_priv. To avoid the need to find the lockbits flash_bank from another flash_bank, efm32x_priv_write and efm32x_erase_page now take an absolute address. There didn't seem to be any reason to prohibit unprotecting individual flash pages, so that limitation is removed from efm32x_protect(). This addresses ticket #185. Valgrind-clean, except for 2x 4kiB not freed/still reachable blocks that were allocated by libudev. No new Clang analyzer warnings, no new sanitizer warnings. Signed-off-by: Doug Brunner <doug.a.brunner@gmail.com> Change-Id: Ifb22e6149939d893f386706e99b928691ec1d41b Reviewed-on: https://review.openocd.org/c/openocd/+/6665 Tested-by: jenkins Reviewed-by: Fredrik Hederstierna <fredrik.hederstierna@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-12-24Document how vector registers are exposed to gdb.Tim Newsome1-0/+37
See https://github.com/riscv/riscv-openocd/pull/570 Change-Id: Ie7cdef3717e107a9df0b48316cfbc547dea9a7fd Signed-off-by: Tim Newsome <tim@sifive.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6776 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-11doc: Updated RISC-V memory-related cmds in documentationJan Matyas1-3/+21
- "riscv set_prefer_sba" - removed from the doc, superseded by the latter - "riscv set_mem_access" - new command, new entry added into the doc This change only addresses the documentation. The corresponding implementation of the RISC-V commands is already merged. Change-Id: I3c07672cde94324407cf667504dba5402f63a543 Signed-off-by: Jan Matyas <matyas@codasip.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6743 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-12-11doc: Update doc for commands "riscv expose_csrs" and "riscv expose_custom"Jan Matyas1-8/+38
These commands were extended/improved in the last drop of RISC-V target updates. Update also the documentation to properly describe how the commands should be used now. Change-Id: I9e2ba6adbe1a4c032b96f5f8ff2d4791fa4c2527 Signed-off-by: Jan Matyas <matyas@codasip.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6738 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tim Newsome <tim@sifive.com>
2021-12-11doc/openocd.texi: Document find and ocd_find commandYasushi SHOJI1-0/+10
Document both find and ocd_find command under Config File Guidelines -> Interface Config Files. find command is used in the previous section as well but the previous section is more about using OpenOCD. The section added is "aimed at any user who needs to write a config file". Change-Id: I698207fe58d564c615a15b50756aa5547a5f40b7 Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6737 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-11doc/openocd.texi: Document command mode commandYasushi SHOJI1-0/+13
Document "command mode" command Server Configuration -> Configuration Stage. The text is taken from command's help string. In addition to the help string, this commit explain the words mismatch, the doc uses "stage" but the command and source code uses "mode" to describe the same thing. Change-Id: I1d5fc8c64a3a0b07ea8430bf016bcbd54e52da1c Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6736 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-11doc: document noinit commandTomas Vanek1-0/+7
Change-Id: I915c7d3231935fd44407b5fa65d86d4cb93e8db5 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/6761 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-11doc: list internal commands called by initTomas Vanek1-1/+12
Change-Id: I5534c94a983906533a1b38c30ec3eb982e62dee7 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/6760 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03doc/openocd.texi: Document usage commandYasushi SHOJI1-0/+7
Document usage command under General Commands -> Server Commands. The text is taken from the command's help string. Change-Id: I957cb46cca98181c3c5e676228c5c103e47bb655 Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6735 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03doc/openocd.texi: Document add_help_text and add_usage_textYasushi SHOJI1-0/+8
Document add_help_text and add_usage_text under Genral Commands -> Misc Commands. The text are taken from command's help strings. Change-Id: I2bbbee8e5faa8d9654227c304e0528f5144275e8 Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6734 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03doc: document 'cmsis-dap cmd' commandTomas Vanek1-0/+10
Change-Id: I90b7f020ee2bf078fdf22e3d21423f333ae061ac Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/6732 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03doc: fix list of supported nRF52 devicesTomas Vanek1-3/+5
Change-Id: I64d6d851dd9333689556b7062b1ff38d41b5ad32 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/6731 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03doc: document 'atsamv gpnvm' commandTomas Vanek1-0/+15
Change-Id: I922c75e2d074447558f85bfda5421aa24a850be1 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/6729 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-12-03doc: mention SWD multidropTomas Vanek1-0/+12
Change-Id: I361dc351c407b67613eadef4d29e27ed0e00bd05 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/6744 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-11-28drivers: call adapter_get_required_serial() in jtag_libusb_open()Antonio Borneo1-1/+2
Now that adapter serial is handled independently from the adapter drivers, move inside jtag_libusb_open() the call to adapter_get_required_serial(), so every adapter that uses libusb will automagically get USB serial support. Extend the documentation to list the adapters involved. Change-Id: I75b3482d38f8ed3418329f3106c5e8b689fd460b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6663 Tested-by: jenkins
2021-11-28jtag/hla, jtag/stlink: switch to command 'adapter serial'Antonio Borneo1-11/+1
The driver hla defines the command 'hla_serial' to specify the serial string of the adapter. The driver st-link defines the command 'st-link serial' to specify the serial string of the adapter. Remove and deprecate the driver commands and use 'adapter serial'. Change-Id: I9505c398a77125b1ebf4ba71da7baf4d663b75be Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6657 Tested-by: jenkins
2021-11-28jtag/jlink: switch to command 'adapter serial'Antonio Borneo1-8/+2
The driver jlink defines the command 'jlink serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Note: in former code the commands 'jlink serial' and 'jlink usb' were mutually exclusive; running one of them would invalidate the effect of a previous execution of the other. The new code gives priority to 'adapter serial', even if executed before 'jlink usb'. Change-Id: I920b0c136716f459b6fd6f7da8a01a7fa1ed389f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6656 Reviewed-by: zapb <dev@zapb.de> Tested-by: jenkins
2021-11-28jtag/xds110: switch to command 'adapter serial'Antonio Borneo1-7/+2
The driver xds110 defines the command 'xds110 serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Note: the original command 'xds110 serial' used a complex and undocumented conversion of the serial number through multibyte string, wide-character string and C cast. The XDS110 I can access and the lsusb dumps available through Google don't show any exotic USB serial that require such conversion. The original developer doesn't remember any constraint that mandates such conversion (see comments in https://review.openocd.org/4322/). The conversion is removed by this patch. Change-Id: I38909918079b2c1797ad85ebec2fea1b33743606 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6655 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2021-11-28jtag/vsllink: switch to command 'adapter serial'Antonio Borneo1-2/+2
The driver vsllink defines the command 'vsllink usb_serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Change-Id: Iadcc018b8aa8974ccd7156915b84e58270fad29d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6654 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2021-11-28jtag/presto: switch to command 'adapter serial'Antonio Borneo1-5/+2
The driver presto defines the command 'presto serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Change-Id: I1a69acce7d4910082d2029d5941ae84f9424314c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6653 Tested-by: jenkins
2021-11-28jtag/kitprog: switch to command 'adapter serial'Antonio Borneo1-7/+2
The driver kitprog defines the command 'kitprog_serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Change-Id: I844cb815af01137392b6d12e1b5972fc77ac092d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6652 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2021-11-28jtag/ftdi: switch to command 'adapter serial'Antonio Borneo1-11/+2
The driver ftdi defines the command 'ftdi serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Change-Id: Ia5b1f325b9fab8f58b5ea70f8b807e50b148b939 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6651 Tested-by: jenkins
2021-11-28jtag/ft232r: switch to command 'adapter serial'Antonio Borneo1-8/+2
The driver ft232r defines the command 'ft232r serial_desc' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Change-Id: I0bd909923a668420604fed3c9f6a260716b044c7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6650 Tested-by: jenkins
2021-11-28jtag/cmsis_dap: switch to command 'adapter serial'Antonio Borneo1-7/+3
The driver cmsis_dap defines the command 'cmsis_dap_serial' to specify the serial string of the adapter. Remove and deprecate the driver command, and use 'adapter serial'. Change-Id: I88e2d4de360a6c6f23529bb18494962a267250df Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6649 Tested-by: jenkins
2021-11-28jtag/adapter: add command 'adapter serial'Antonio Borneo1-0/+8
Several adapter define their own command to specify the USB serial number or serial string to be used during USB search. Define a general command 'adapter serial' to be proposed as replacement of the driver specific ones. No driver is changed so far to use it. Change-Id: I7631687a4163ccc63a9bdf3ad1fcb300fc483d3a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6647 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2021-11-23doc: fix typos in commands definitionAntonio Borneo1-9/+9
Change-Id: Ie07260f229c6bd227bae0bf3dd97d29bf84c72ec Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/6725 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
generated by cgit v1.1 at 2024-08-16 07:18:34 +0000