diff options
author | Antonio Borneo <borneo.antonio@gmail.com> | 2018-08-29 10:55:48 +0200 |
---|---|---|
committer | Matthias Welwarsky <matthias@welwarsky.de> | 2019-01-23 15:26:28 +0000 |
commit | c2e18bfaeafda3b5f5680bde47d3a04ce8cb2451 (patch) | |
tree | 4afe2a7e23aaa1105fdbc719a80be15a2b72dea8 /src/jtag | |
parent | 418515b21ed506449dfc9981265edec7800619b5 (diff) | |
download | riscv-openocd-c2e18bfaeafda3b5f5680bde47d3a04ce8cb2451.zip riscv-openocd-c2e18bfaeafda3b5f5680bde47d3a04ce8cb2451.tar.gz riscv-openocd-c2e18bfaeafda3b5f5680bde47d3a04ce8cb2451.tar.bz2 |
arm_adi_v5: fix and update sequences to spec IHI 0031E
Fix the SWD line reset sequence accordingly to Arm specification IHI
0031E that requires at least 2 idle clocks after the 50 clocks with
SWDIO high.
Fix the value of the activation code in the (currently unused)
sequence dormant-to-SWD.
Make each sequence's length multiple of 8, so it is compatible with
adapters that have such limitation (e.g. buspirate) and try to split
and comment each part of the sequence (when possible keep each part
byte aligned, inspired from commit 3ef9beb52cd0). This slightly
increases the sequence length but does not impact run-time
performance because these are rarely used sequences.
Add the missing sequence dormant-to-JTAG and JTAG-to-dormant, not
used yet.
On devices that implements the dormant state, IHI 0031E deprecates
the direct switching between SWD and JTAG, and recommends using a
transition through dormant. This is not implemented.
Change-Id: Iad18c0e736cfd9366be175d22658d664b0c61eab
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4851
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Diffstat (limited to 'src/jtag')
-rw-r--r-- | src/jtag/swd.h | 126 |
1 files changed, 110 insertions, 16 deletions
diff --git a/src/jtag/swd.h b/src/jtag/swd.h index 52f41d5..3ff4de0 100644 --- a/src/jtag/swd.h +++ b/src/jtag/swd.h @@ -53,16 +53,25 @@ static inline uint8_t swd_cmd(bool is_read, bool is_ap, uint8_t regnum) /* SWD_ACK_* bits are defined in <target/arm_adi_v5.h> */ +/* + * The following sequences are updated to + * ARM(tm) Debug Interface v5 Architecture Specification ARM IHI 0031E + */ + /** - * Line reset. + * SWD Line reset. * - * Line reset is at least 50 SWCLK cycles with SWDIO driven high, followed - * by at least one idle (low) cycle. + * SWD Line reset is at least 50 SWCLK cycles with SWDIO driven high, + * followed by at least two idle (low) cycle. + * Bits are stored (and transmitted) LSB-first. */ static const uint8_t swd_seq_line_reset[] = { - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03 + /* At least 50 SWCLK cycles with SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* At least 2 idle (low) cycles */ + 0x00, }; -static const unsigned swd_seq_line_reset_len = 51; +static const unsigned swd_seq_line_reset_len = 64; /** * JTAG-to-SWD sequence. @@ -71,36 +80,53 @@ static const unsigned swd_seq_line_reset_len = 51; * high, putting either interface logic into reset state, followed by a * specific 16-bit sequence and finally a line reset in case the SWJ-DP was * already in SWD mode. + * Bits are stored (and transmitted) LSB-first. */ static const uint8_t swd_seq_jtag_to_swd[] = { - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7b, 0x9e, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f, + /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* Switching sequence from JTAG to SWD */ + 0x9e, 0xe7, + /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* At least 2 idle (low) cycles */ + 0x00, }; -static const unsigned swd_seq_jtag_to_swd_len = 118; +static const unsigned swd_seq_jtag_to_swd_len = 136; /** * SWD-to-JTAG sequence. * * The SWD-to-JTAG sequence is at least 50 TCK/SWCLK cycles with TMS/SWDIO * high, putting either interface logic into reset state, followed by a - * specific 16-bit sequence and finally at least 5 TCK cycles to put the - * JTAG TAP in TLR. + * specific 16-bit sequence and finally at least 5 TCK/SWCLK cycles with + * TMS/SWDIO high to put the JTAG TAP in Test-Logic-Reset state. + * Bits are stored (and transmitted) LSB-first. */ static const uint8_t swd_seq_swd_to_jtag[] = { - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf3, 0x9c, 0xff + /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* Switching sequence from SWD to JTAG */ + 0x3c, 0xe7, + /* At least 5 TCK/SWCLK cycles with TMS/SWDIO high */ + 0xff, }; -static const unsigned swd_seq_swd_to_jtag_len = 71; +static const unsigned swd_seq_swd_to_jtag_len = 80; /** * SWD-to-dormant sequence. * * This is at least 50 SWCLK cycles with SWDIO high to put the interface * in reset state, followed by a specific 16-bit sequence. + * Bits are stored (and transmitted) LSB-first. */ static const uint8_t swd_seq_swd_to_dormant[] = { - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf3, 0x8e, 0x03 + /* At least 50 SWCLK cycles with SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* Switching sequence from SWD to dormant */ + 0xbc, 0xe3, }; -static const unsigned swd_seq_swd_to_dormant_len = 66; +static const unsigned swd_seq_swd_to_dormant_len = 72; /** * Dormant-to-SWD sequence. @@ -110,14 +136,82 @@ static const unsigned swd_seq_swd_to_dormant_len = 66; * sequence, followed by 4 TCK/SWCLK cycles with TMS/SWDIO low, followed by * a specific protocol-dependent activation code. For SWD the activation code * is an 8-bit sequence. The sequence ends with a line reset. + * Bits are stored (and transmitted) LSB-first. */ static const uint8_t swd_seq_dormant_to_swd[] = { + /* At least 8 SWCLK cycles with SWDIO high */ + 0xff, + /* Selection alert sequence */ + 0x92, 0xf3, 0x09, 0x62, 0x95, 0x2d, 0x85, 0x86, + 0xe9, 0xaf, 0xdd, 0xe3, 0xa2, 0x0e, 0xbc, 0x19, + /* + * 4 SWCLK cycles with SWDIO low ... + * + SWD activation code 0x1a ... + * + at least 8 SWCLK cycles with SWDIO high + */ + 0xa0, /* ((0x00) & GENMASK(3, 0)) | ((0x1a << 4) & GENMASK(7, 4)) */ + 0xf1, /* ((0x1a >> 4) & GENMASK(3, 0)) | ((0xff << 4) & GENMASK(7, 4)) */ + 0xff, + /* At least 50 SWCLK cycles with SWDIO high */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* At least 2 idle (low) cycles */ + 0x00, +}; +static const unsigned swd_seq_dormant_to_swd_len = 224; + +/** + * JTAG-to-dormant sequence. + * + * This is at least 5 TCK cycles with TMS high to put the interface + * in test-logic-reset state, followed by a specific 31-bit sequence. + * Bits are stored (and transmitted) LSB-first. + */ +static const uint8_t swd_seq_jtag_to_dormant[] = { + /* At least 5 TCK cycles with TMS high */ + 0xff, + /* + * Still one TCK cycle with TMS high followed by 31 bits JTAG-to-DS + * select sequence 0xba, 0xbb, 0xbb, 0x33, + */ + 0x75, /* ((0xff >> 7) & GENMASK(0, 0)) | ((0xba << 1) & GENMASK(7, 1)) */ + 0x77, /* ((0xba >> 7) & GENMASK(0, 0)) | ((0xbb << 1) & GENMASK(7, 1)) */ + 0x77, /* ((0xbb >> 7) & GENMASK(0, 0)) | ((0xbb << 1) & GENMASK(7, 1)) */ + 0x67, /* ((0xbb >> 7) & GENMASK(0, 0)) | ((0x33 << 1) & GENMASK(7, 1)) */ +}; +static const unsigned swd_seq_jtag_to_dormant_len = 40; + +/** + * Dormant-to-JTAG sequence. + * + * This is at least 8 TCK/SWCLK cycles with TMS/SWDIO high to abort any ongoing + * selection alert sequence, followed by a specific 128-bit selection alert + * sequence, followed by 4 TCK/SWCLK cycles with TMS/SWDIO low, followed by + * a specific protocol-dependent activation code. For JTAG there are two + * possible activation codes: + * - "JTAG-Serial": 12 bits 0x00, 0x00 + * - "Arm CoreSight JTAG-DP": 8 bits 0x0a + * We use "JTAG-Serial" only, which seams more generic. + * Since the target TAP can be either in Run/Test Idle or in Test-Logic-Reset + * states, Arm recommends to put the TAP in Run/Test Idle using one TCK cycle + * with TMS low. To keep the sequence length multiple of 8, 8 TCK cycle with + * TMS low are sent (allowed by JTAG state machine). + * Bits are stored (and transmitted) LSB-first. + */ +static const uint8_t swd_seq_dormant_to_jtag[] = { + /* At least 8 TCK/SWCLK cycles with TMS/SWDIO high */ 0xff, + /* Selection alert sequence */ 0x92, 0xf3, 0x09, 0x62, 0x95, 0x2d, 0x85, 0x86, 0xe9, 0xaf, 0xdd, 0xe3, 0xa2, 0x0e, 0xbc, 0x19, - 0x10, 0xfa, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f + /* + * 4 TCK/SWCLK cycles with TMS/SWDIO low ... + * + 12 bits JTAG-serial activation code 0x00, 0x00 + */ + 0x00, 0x00, + /* put the TAP in Run/Test Idle */ + 0x00, }; -static const unsigned swd_seq_dormant_to_swd_len = 199; +static const unsigned swd_seq_dormant_to_jtag_len = 160; enum swd_special_seq { LINE_RESET, |