Age | Commit message (Collapse) | Author | Files | Lines |
|
`reg` is a number in register cache, as evident by the following call to
`reg_cache_set()`. `CSR_DCSR` is `GDB_REGNO_DCSR - 65`. This results in
setting cache value for another register, which does not exist, and
causes a segfault if all non-existent registers are not allocated a
value (`reg->value == NULL`).
Change-Id: Iab68a4bb55ce6d4730804e9709e40ab2af8a07c6
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
|
|
target/riscv: Add missing DM base offset to read_memory_bus_v1()
|
|
target/riscv: check `abstractcs.busy`
|
|
target/riscv: read registers are not valid on a running target
|
|
Merge up to a35e254c5383008cdacf7838a777f7f17af5eeb1 from upstream
|
|
According to the RISC-V Debug Spec (1.0.0-rc1)[3.7 Abstract Commands]:
> While an abstract command is executing (busy in abstractcs is high), a
debugger must not change hartsel, and must not write 1 to haltreq,
resumereq, ackhavereset, setresethaltreq, or clrresethaltreq.
The patch ensures the rule is followed.
Change-Id: Id7d363d9fdeb365181b7058e0ceb0be0df39654f
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
|
|
This allows to examine each DM ones (e.g. enumerating harts assigned to
the DM). Additionaly, it is guaranteed that the DM is reset before the
examination.
Change-Id: I2333d06ff1152bf51c647d59baa55cb402054cb9
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
|
|
According to the RISC-V Debug Spec (1.0.0-rc1)[3.7 Abstract Commands]:
> While an abstract command is executing (busy in abstractcs is high), a
debugger must not change hartsel, and must not write 1 to haltreq,
resumereq, ackhavereset, setresethaltreq, or clrresethaltreq.
Tracking `abstractcs.busy` allows to enforce this rule.
Change-Id: If5975b48cf9fd379033268145c79103c36fb8134
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
|
|
Change-Id: I2c5335bb6055b767d3c3ffb3f6910b71b9c2bb35
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
|
|
dmi_scan expects the full DMI address.
Signed-off-by: Emmanuel Blot <eblot@rivosinc.com>
|
|
Checkpatch-ignore: MACRO_ARG_REUSE, MACRO_ARG_PRECEDENCE
Change-Id: Icd10f44d162054f8f32019a579ccbdda2cee7a91
|
|
[NFC] target/riscv: refactor `init_registers()`
|
|
Move setting of do_reconnect flag from swd_run_inner()
to swd_run(). Reconnect is not used at the inner level
and the flag had to be cleared after swd_run_inner()
to prevent recursion.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ib1de80bbdf10d1cbfb1dd351c6a5658e50d12af2
Reviewed-on: https://review.openocd.org/c/openocd/+/8155
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
|
|
The file 'list.h', copied from FreeBSD, does not depend from any
OpenOCD specific include file, but only needs 'stddef.h' for the
type 'size_t'.
Let 'list.h' to include the correct header file, then fix the now
broken dependencies in the other files that were incorrectly
relying on 'list.h' to include 'helper/types.h'
Change-Id: Idd31b5bf607e226cac44ef41b2aa335ae4dbf519
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8173
Tested-by: jenkins
|
|
The file list.h was originally taken from the Linux kernel code,
thus under license GPL-2.0-only. This locks OpenOCD to follow the
same license, even if the majority of OpenOCD files are licensed
as GPL-2.0-or-later.
A similar file is also present in FreeBSD code base under the more
permissive license BSD-2-Clause.
Drop the code from Linux kernel and replace it with the code from
FreeBSD 13.3.0.
Adapt the code to OpenOCD coding style by fixing the majority of
issues identified by checkpatch.
Add the OpenOCD specific macros and comments.
Unfortunately this causes the lost of all the doxygen comments.
Checkpatch-ignore: MACRO_ARG_REUSE, MACRO_ARG_PRECEDENCE
Change-Id: I6d86752c50158f3174c4e8c4add81e9998d01e0e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8172
Tested-by: jenkins
|
|
OpenOCD can send it's log to gdb, and gdb replies with 'OK'.
Calls to LOG_XXX() are also present in the code that communicates
with gdb. This can cause infinite nested calls.
OpenOCD uses the flag 'gdb_con->busy' to protect the communication
with gdb and prevent nested calls.
There is no reason to check for 'gdb_con->busy' in the code for
keep-alive, as keep_alive() is never called in this gdb server;
the flag would eventually be set if the current keep_alive() will
send something to gdb.
Drop the flag 'gdb_con->busy' in gdb_keep_client_alive().
While there, document the use of 'gdb_con->busy'.
Change-Id: I1ea20bf96abb5d2f1fcdba1e3861df257c396bb6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8166
Tested-by: jenkins
|
|
To avoid gdb to timeout, OpenOCD implements a keep-alive mechanism
that consists in sending periodically to gdb empty strings embedded
in the "O" remote reply packet.
The main purpose of "O" packets is to forward in the gdb console
the output of the remote execution; the gdb-remote puts in the "O"
packet the string that gdb will print. It's use is restricted to
few "running/execution" contexts listed in
http://sourceware.org/gdb/onlinedocs/gdb/Stop-Reply-Packets.html
and this currently limits the keep-alive capabilities of OpenOCD.
Long data transfer (memory R/W) can also cause gdb to timeout if
the interface is too slow. In this case the usual keep-alive based
on "O" packet cannot be used and, if used, would trigger a protocol
error that causes the transfer to be dropped.
The slow transfer rate can be simulated by adding some delay in the
main loop of mem_ap_write() and mem_ap_read(), then using the gdb
commands "dump" and "restore".
In the wait loop during a memory R/W, gdb drops any extra character
received from the gdb-remote that is not recognized as a valid
reply to the memory command. Every dropped character re-initializes
the timeout counter and could be used as keep-alive.
From gdb 7.0 (released 2009-10-06), an asynchronous notification
can also be received from gdb-remote during a memory R/W and has
the effect to reset the timeout counter, thus can be used as
keep-alive.
The notification would be treated as "junk" extra characters by any
gdb older than 7.0, being still valid as keep-alive.
Check putpkt_binary() and getpkt_sane() in gdb commit
74531fed1f2d662debc2c209b8b3faddceb55960
Currently, only one notification packet ("Stop") is recognized by
gdb, and gdb documentation reports that notification packets that
are not recognized should be silently dropped.
Use 'set debug remote 1' in gdb to dump the received notifications
and the junk extra characters.
Add a new level in enum gdb_output_flag for using the asynchronous
notifications.
Activate this new level during memory transfers.
Send a custom "oocd_keepalive" notification packet as keep_alive.
While there, drop a useless return in the switch/case, already
managed in case of break.
After this commit, the proper calls to keep_alive() have to be
added in the loops that code the memory transfers. Of course, the
keep_alive() should be placed during the wait for JTAG flush, not
while locally queuing the JTAG elementary transfers.
Change-Id: I9ca8e78630611597d15984bd0e8634c8fc3c32b9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8165
Tested-by: jenkins
|
|
The logic in `init_registers()` was quite convoluted.
Initialization of each `struct reg` field is separated into function
`gdb_regno_<field_name>()`.
IMHO, this makes it much easier to reason about the code.
Change-Id: Id7faa1464ce026cc5025585d0a6a95a01fb39cee
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
|
|
Merge up to 07141132a7d787005c0829618a60b4a842be7847 from upstream
|
|
Add access to fpr and cp1 registers.
GDB can now check the FPRs with `info reg f` and change them.
Checkpatch-ignore: MACRO_ARG_REUSE
Change-Id: I63896ab6f6737054d8108db105a13a58e1446fbc
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7866
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
Change-Id: I7941de02a968ccab730bfebd3483b8c3b84d7e53
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7980
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
|
|
To simplify the ipdbg start/stop command and be able to
add additional commands in the future, we introduce the
concept of a hub which has to be created before a
ipdbg server can be started.
The hub was created on the fly in previous versions.
Change-Id: I55f317542d01a7324990b2cacd496a41fa5ff875
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7979
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
|
|
When receiving an OpenOCD debug log to investigate about errors or
issues, the first question is often about providing the complete
command line to better understand the use context.
Plus, when OpenOCD is lunched by an IDE, its command line is kept
hidden inside the IDE, adding troubles to the user to recover it.
Add the full command line directly inside the debug log.
It could have been useful to also search and add in the log the
full path of the OpenOCD executable, but this is not an immediate
task due to portability among OS's. See, for example:
https://stackoverflow.com/questions/933850
This part could be handled in a future change, if really needed.
Change-Id: Ia6c5b838b9b7208bf1ecac7f95b5efc319aeabf5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8170
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
|
|
Extend the existing code to support Monitor mode in AArch32.
Change-Id: Ia43df98d1497baac48aea67b92d81344c24f0635
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8169
Tested-by: jenkins
|
|
ADIv6 brought more complicated rules for DP reg 0 banking.
Neither the original implementation [1] nor the later
modification [2] respected that the DP reg 0 is banked
for read only, not for write. Enforcing of an useless
SELECT write before a write to ABORT register may trigger
FAULT (CTRL/STAT bits ORUNDETECT and STICKYORUN are set)
or WAIT (DP is stalled by an outstanding previous operation)
and therefore make ABORT register virtually unusable
on some adapters (bitbang, CMSIS-DAP).
There are DP ABORT specific functions swd_queue_ap_abort()
and swd_clear_sticky_errors() which worked around the problem
using the lowest level swd->write_reg(). Using a specific
write procedure for a single DP register was error prone
(there are other DP_ABORT writes using swd_queue_dp_write_inner())
and also the Tcl command 'xx.dap dpreg 0 value' suffered
from unwanted SELECT write.
Other smaller discords in DP banking probably do not
influence normal DP operation however they may complicate
debugging in corner cases.
Adhere strictly to the DP banking rules for both ADI versions.
Fixes: [1] commit 72fb88613f02 ("adiv6: add low level swd transport")
Fixes: [2] commit ee3fb5a0eacb ("target/arm_adi_v5: fix DP SELECT logic")
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I3328748c1c3e0661c5ecd6eb070ac519b190ace2
Reviewed-on: https://review.openocd.org/c/openocd/+/8154
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
The bitbang driver kept retrying a SWD command as long as
the debugged device had been responding by SWD WAIT.
If the DP stalled in WAIT permanently, OpenOCD hanged.
Check 0.5 sec timeout in WAIT retry loop.
While on it insert a short alive_sleep() if the command
is retried 20 or more times.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I744e56e21a5a2dc2c4494cc0d7bbcb4be14ddb23
Reviewed-on: https://review.openocd.org/c/openocd/+/8153
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
|
|
Log SWD commands with not OK response but WAIT retries at debug level.
For commands responded OK and WAIT retries use debug io level
not to flood the log.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Idf658e82ed970061c155945df55d06908ed25e09
Reviewed-on: https://review.openocd.org/c/openocd/+/8152
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
Allow logging at a changeable level.
Add an example of usage in ftdi driver.
Log SWD commands with not OK response at debug level (3).
For commands which responded OK use debug io level (4)
not to flood the log.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I67a472b293f7ed9ee84cadb7c081803e9eeb1ad0
Reviewed-on: https://review.openocd.org/c/openocd/+/8151
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
|
|
Allow direct pointer to struct adiv5_private_config
for targets with adiv5_private_config inside of a bigger
private config container. Use it instead of the private_config
pointer toggling hack in aarch64.c
Allow optional use of -dap parameter and use it instead
of the static variable hack in xtensa_chip.c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I7260c79332940adfa49d57b45cae39325cdaf432
Reviewed-on: https://review.openocd.org/c/openocd/+/8138
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
Unify the error codes returned by adapter drivers in the case
of the received SWD ACK field differs from OK.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I29e478390b4b30408054a090ac6a7fac3415ae71
Reviewed-on: https://review.openocd.org/c/openocd/+/8137
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
|
|
Commit [1] added a break on error to the nrf5_erase() sector loop
and the checking of the res value became useless in the for loop condition.
Removing nrf5_get_probed_chip_if_halted() later in [2]
dropped res initialization and clang static analyser complains
"The left operand of '==' is a garbage value"
Drop the useless test!
Fixes: [1] commit 491636c8b832 ("flash/nor/nrf5: check protection before flash erase/write on nRF51")
Fixes: [2] commit 2db325f5395f ("flash/nor/nrf5: drop nrf5_get_probed_chip_if_halted()")
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ife6071c509719f8d7dc312fe9a780bdcf2575f69
Reviewed-on: https://review.openocd.org/c/openocd/+/8174
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
Add access to dsp registers and a command for dsp related operations.
Checkpatch-ignore: MACRO_ARG_REUSE
Change-Id: I30aec0b9e4984896965edb1663f74216ad41101e
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7867
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
Running the GDB command 'flash-erase' triggers sending the remote
GDB commands 'vFlashErase' (one per flash bank) followed by one
single 'vFlashDone', with no 'vFlashWrite' commands in between.
This causes the field 'gdb_connection->vflash_image' to be NULL
during the execution of 'vFlashDone', triggering a segmentation
fault in OpenOCD.
While parsing 'vFlashDone', check if any image to flash has been
received.
Change-Id: I443021c7a531255b60f2c44c2685e52e3c34b5c8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8164
Tested-by: jenkins
|
|
After commit d9b2607ca094 ("gdb_server: support sparse register
maps"), GDB crashes while requesting the value of 'cpsr' because
the fake register is tagged as not existing.
Change the logic and set all register as existing, while still
limiting the list for the initial GDB request at connect.
Change-Id: I1c4e274c06147683db2a59a8920ae5ccd863e15c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8163
Tested-by: jenkins
|
|
for features flags.
Change-Id: I8bff0f5fac41c50180c847f36c6d2a075eca32ca
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8109
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
|
|
The command substantially complicates support of nRF53/91
series. It was not even properly ported to nRF52.
The informative value is disputable. Who wants to see
e.g. override trim values for radio or unique device ID?
Drop it and simplify the driver.
Change-Id: Ia7fb20ce2ebf16065705c5d18deaf934e58db426
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8108
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
nrf5_get_probed_chip_if_halted() was somewhat bizarre
combination of functions:
- test if the target is halted is appropriate for flash
erase/write only, certainly not for getting chip info
- getting chip pointer takes place more frequently
and using one temporary variable for dereference
makes no harm
- probing chip is useless at all as the flash
infrastructure always calls auto_probe() before
entering a flash operation
Replace the function by ordinary and readable code.
Change-Id: Ic31f4e33d8b7b36687be3f40bfd0fe913d17b75f
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8107
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
from nRF52 family.
Change-Id: I6d2b4586700bb4014c0b77dbf4ea26d1b5dc9715
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8106
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
|
|
from Product Specification of nRF52805, 810, 811
820, 833 and 840.
While on it, rename the table to make sure the codes
are valid for nRF52 series only.
Change-Id: Id8f78fd214c5d345d1769378ae546a6be5a183ba
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8105
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
After 'reset run' or 'reset halt' the loaded application
is expected to manipulate RAMON register to workaround
the known silicon errata.
Moreover, writing to RAMON register from 'reset-end' event
after 'reset run' may collide with application intentions.
Use the workaround in 'reset-init' event only to ensure
correct function of target algorithms.
Change-Id: I7d2d92e6805a05a83676edb46b3163ef39b9a7e4
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8104
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
Use the newer driver name 'nrf5' instead.
While on it set the unused parameters of flash bank
creation to zero.
While on it remove 2 empty comments.
Change-Id: I9cf0eadc5b696e6c8b7e6aec0ea3345967523e87
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8103
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
|
|
While on it update table comment and drop
not working URLs.
Change-Id: I9e21c72aa75a908c644460e43c148d3240c49b2d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8102
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
|
|
Change-Id: Ibca0c8093e2983e1ee199f79ed777f5136794195
|
|
On 2008-03-05, before git's age, commit 6d9501467441 adds sending
an ACK ('+' char) at GDB connection, before receiving any GDB
remote command that requires to be ACK'ed.
Neither the text added in the commit message ("added ACK upon
connection (send +)") nor in the associated comment ("send ACK to
GDB for debug request") provide an exhaustive explanation for
sending this unsolicited ACK.
This code has never been touched since its introduction.
Analysis of GDB code doesn't show it's required, including old GDB
code.
Running gdbserver (from GDB package) and attaching it with "nc"
shows that gdbserver does not send any ACK to a new connection.
Same for lldb-server.
Drop it!
Change-Id: Id68c352ce44dd85a1ea3d67446e17e2a241ef058
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6768
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Anatoly P <anatoly.parshintsev@syntacore.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
|
|
For the sake of https://review.openocd.org/c/openocd/+/7957
Instead of "coreid", 'target smp' command call order used as
an index
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Iab86b81868d37c0bf8663707ee11367c41f6b96d
Reviewed-on: https://review.openocd.org/c/openocd/+/8162
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
The new FTDI ICs with USB-C Support have different bcdDevice
identifiers. The added bcdDevice identifiers are taken from
the chips datasheet, respectively. The patch was tested with
a FT4232HP IC.
The used bcdDevice IDs can be found in Section 8.1 of the respective
Datasheets:
https://ftdichip.com/wp-content/uploads/2023/09/DS_FT233HP-v1.4.pdf
https://ftdichip.com/wp-content/uploads/2023/09/DS_FT2233HP-v1.4.pdf
https://ftdichip.com/wp-content/uploads/2023/09/DS_FT4233HP-v1.5.pdf
Change-Id: I701083cb72030e398ce1c74310676e13895a77ff
Signed-off-by: Luca Rufer <lucarufer333@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8134
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
target/riscv: Improve riscv controls that manage the set of available triggers for watchpoints
|
|
When performing a command queue allocation larger than the default page
size of 1MiB any subsequent allocations will run into an integer under-
flow when checking for the remaining memory left in the current page.
Causing the function returning a pointer past the end of the buffer and
thus creating a buffer overflow.
This has been observed to cause some transfers to Efinix FPGAs to fail,
because another buffer can get corrupted in the process, causing its
respective free() to fail.
Change-Id: Ic5a0e1774e2dbd58f1a05127f14816c8251a7d9c
Signed-off-by: SydMontague <sydmontague@phoenix-staffel.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8126
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
|
|
find members of a union, nested in struct.
Allows file to be compiled with GCC 4.0
Signed-off-by: Sevan Janiyan <venture37@geeklan.co.uk>
Change-Id: Ied68668d3b5f811573a20e11e83aceff268963eb
Reviewed-on: https://review.openocd.org/c/openocd/+/8120
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
|
|
Merge up to efdd5e0 from upstream
|