diff options
Diffstat (limited to 'tcl/board/unknown_at91sam9260.cfg')
| -rw-r--r-- | tcl/board/unknown_at91sam9260.cfg | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/tcl/board/unknown_at91sam9260.cfg b/tcl/board/unknown_at91sam9260.cfg index 3337eea..017f793 100644 --- a/tcl/board/unknown_at91sam9260.cfg +++ b/tcl/board/unknown_at91sam9260.cfg @@ -1,4 +1,4 @@ -# Thanks to Pieter Conradie for this script! +# Thanks to Pieter Conradie for this script! # # Unknown vendor board contains: # @@ -15,12 +15,12 @@ source [find target/at91sam9260.cfg] $_TARGETNAME configure -event reset-start { # At reset CPU runs at 22 to 42 kHz. # JTAG Frequency must be 6 times slower. - jtag_rclk 3 + jtag_rclk 3 halt # RSTC_MR : enable user reset, MMU may be enabled... use physical address arm926ejs mww_phys 0xfffffd08 0xa5000501 } - + $_TARGETNAME configure -event reset-init { mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog @@ -37,7 +37,7 @@ $_TARGETNAME configure -event reset-init { sleep 10 # wait 10 ms # Increase JTAG Speed to 6 MHz if RCLK is not supported - jtag_rclk 6000 + jtag_rclk 6000 arm7_9 dcc_downloads enable # Enable faster DCC downloads @@ -51,7 +51,7 @@ $_TARGETNAME configure -event reset-init { mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31 mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 mww 0xfffff860 0xffff0000 # PIO_PUDR : Disable D15..D31 pull-ups - + mww 0xffffef1c 0x00010102 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM # VDDIOMSEL set for +3V3 memory # Disable D0..D15 pull-ups |