diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 28 |
1 files changed, 19 insertions, 9 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 25554f8..4665092 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -537,15 +537,25 @@ debuggers to ARM Cortex based targets @url{http://www.keil.com/support/man/docs/ @item @b{TI XDS110 Debug Probe} @* The XDS110 is included as the embedded debug probe on many Texas Instruments -LaunchPad evaluation boards. -@* The XDS110 is also available as a stand-alone USB debug probe. The XDS110 -stand-alone probe has the additional ability to supply voltage to the target -board via its AUX FUNCTIONS port. Use the -@command{xds110_supply_voltage <millivolts>} command to set the voltage. 0 turns -off the supply. Otherwise, the supply can be set to any value in the range 1800 -to 3600 millivolts. -@* Link: @url{http://processors.wiki.ti.com/index.php/XDS110} -@* Link: @url{http://processors.wiki.ti.com/index.php/XDS_Emulation_Software_Package#XDS110_Support_Utilities} +LaunchPad evaluation boards. The XDS110 is also available as a stand-alone USB +debug probe with the added capability to supply power to the target board. The +following commands are supported by the XDS110 driver: +@*@deffn {Config Command} {xds110 serial} serial_string +Specifies the serial number of which XDS110 probe to use. Otherwise, the first +XDS110 found will be used. +@end deffn +@*@deffn {Config Command} {xds110 supply} voltage_in_millivolts +Available only on the XDS110 stand-alone probe. Sets the voltage level of the +XDS110 power supply. A value of 0 leaves the supply off. Otherwise, the supply +can be set to any value in the range 1800 to 3600 millivolts. +@end deffn +@*@deffn {Command} {xds110 info} +Displays information about the connected XDS110 debug probe (e.g. firmware +version). +@end deffn +@* Further information can be found at the following sites: +@* Link: @url{https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds110.html} +@* Link: @url{https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds_software_package_download.html#xds110-support-utilities} @end itemize @section IBM PC Parallel Printer Port Based |