aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--doc/openocd.texi13
-rw-r--r--src/flash/nor/drivers.c4
-rw-r--r--src/flash/nor/spearsmi.c158
-rw-r--r--tcl/board/spear310evb20.cfg2
-rw-r--r--tcl/target/str750.cfg2
5 files changed, 90 insertions, 89 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 2727a0b..70d789a 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -4252,14 +4252,15 @@ flash bank $_FLASHNAME cfi 0x00000000 0x02000000 2 4 $_TARGETNAME
@c "cfi part_id" disabled
@end deffn
-@deffn {Flash Driver} spearsmi
-@cindex SPEAr Serial Memory Interface
+@deffn {Flash Driver} stmsmi
+@cindex STMicroelectronics Serial Memory Interface
@cindex SMI
-@cindex spearsmi
-All members of SPEAr MPU family from STMicroelectronics include a
+@cindex stmsmi
+Some devices form STMicroelectronics (e.g. STR75x MCU family,
+SPEAr MPU family) include a proprietary
``Serial Memory Interface'' (SMI) controller able to drive external
SPI flash devices.
-Depending on specific MPU and board configuration, up to 4 external
+Depending on specific device and board configuration, up to 4 external
flash devices can be connected.
SMI makes the flash content directly accessible in the CPU address
@@ -4274,7 +4275,7 @@ All other parameters are ignored. Additional information, like
flash size, are detected automatically.
@example
-flash bank $_FLASHNAME spearsmi 0xf8000000 0 0 0 $_TARGETNAME
+flash bank $_FLASHNAME stmsmi 0xf8000000 0 0 0 $_TARGETNAME
@end example
@end deffn
diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c
index f89e3f0..a1a60b1 100644
--- a/src/flash/nor/drivers.c
+++ b/src/flash/nor/drivers.c
@@ -40,7 +40,7 @@ extern struct flash_driver pic32mx_flash;
extern struct flash_driver avr_flash;
extern struct flash_driver faux_flash;
extern struct flash_driver virtual_flash;
-extern struct flash_driver spearsmi_flash;
+extern struct flash_driver stmsmi_flash;
/**
* The list of built-in flash drivers.
@@ -66,7 +66,7 @@ static struct flash_driver *flash_drivers[] = {
&avr_flash,
&faux_flash,
&virtual_flash,
- &spearsmi_flash,
+ &stmsmi_flash,
NULL,
};
diff --git a/src/flash/nor/spearsmi.c b/src/flash/nor/spearsmi.c
index 10b5403..c9a1672 100644
--- a/src/flash/nor/spearsmi.c
+++ b/src/flash/nor/spearsmi.c
@@ -17,7 +17,7 @@
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
-/* SPEAr Serial Memory Interface (SMI) controller is a SPI bus controller
+/* STM Serial Memory Interface (SMI) controller is a SPI bus controller
* specifically designed for SPI memories.
* Only SPI "mode 3" (CPOL=1 and CPHA=1) is supported.
* Two working modes are available:
@@ -117,7 +117,7 @@
#define SMI_PROBE_TIMEOUT (100)
#define SMI_MAX_TIMEOUT (3000)
-struct spearsmi_flash_bank
+struct stmsmi_flash_bank
{
int probed;
uint32_t io_base;
@@ -184,41 +184,41 @@ static struct flash_device flash_devices[] = {
FLASH_ID(NULL, 0, 0, 0, 0, 0)
};
-struct spearsmi_target {
+struct stmsmi_target {
char *name;
uint32_t tap_idcode;
uint32_t smi_base;
uint32_t io_base;
};
-static struct spearsmi_target target_devices[] = {
+static struct stmsmi_target target_devices[] = {
/* name, tap_idcode, smi_base, io_base */
{ "SPEAr3xx/6xx", 0x07926041, 0xf8000000, 0xfc000000 },
{ "STR75x", 0x4f1f0041, 0x80000000, 0x90000000 },
{ NULL, 0, 0, 0 }
};
-FLASH_BANK_COMMAND_HANDLER(spearsmi_flash_bank_command)
+FLASH_BANK_COMMAND_HANDLER(stmsmi_flash_bank_command)
{
- struct spearsmi_flash_bank *spearsmi_info;
+ struct stmsmi_flash_bank *stmsmi_info;
LOG_DEBUG(__FUNCTION__);
if (CMD_ARGC < 6)
{
- LOG_WARNING("incomplete flash_bank spearsmi configuration");
+ LOG_WARNING("incomplete flash_bank stmsmi configuration");
return ERROR_FLASH_BANK_INVALID;
}
- spearsmi_info = malloc(sizeof(struct spearsmi_flash_bank));
- if (spearsmi_info == NULL)
+ stmsmi_info = malloc(sizeof(struct stmsmi_flash_bank));
+ if (stmsmi_info == NULL)
{
LOG_ERROR("not enough memory");
return ERROR_FAIL;
}
- bank->driver_priv = spearsmi_info;
- spearsmi_info->probed = 0;
+ bank->driver_priv = stmsmi_info;
+ stmsmi_info->probed = 0;
return ERROR_OK;
}
@@ -249,14 +249,14 @@ static int poll_tff(struct target *target, uint32_t io_base, int timeout)
static int read_status_reg(struct flash_bank *bank, uint32_t *status)
{
struct target *target = bank->target;
- struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv;
- uint32_t io_base = spearsmi_info->io_base;
+ struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
+ uint32_t io_base = stmsmi_info->io_base;
/* clear transmit finished flag */
SMI_CLEAR_TFF();
/* Read status */
- SMI_WRITE_REG(SMI_CR2, spearsmi_info->bank_num | SMI_RSR);
+ SMI_WRITE_REG(SMI_CR2, stmsmi_info->bank_num | SMI_RSR);
/* Poll transmit finished flag */
SMI_POLL_TFF(SMI_CMD_TIMEOUT);
@@ -302,8 +302,8 @@ static int wait_till_ready(struct flash_bank *bank, int timeout)
static int smi_write_enable(struct flash_bank *bank)
{
struct target *target = bank->target;
- struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv;
- uint32_t io_base = spearsmi_info->io_base;
+ struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
+ uint32_t io_base = stmsmi_info->io_base;
uint32_t status;
int retval;
@@ -314,7 +314,7 @@ static int smi_write_enable(struct flash_bank *bank)
SMI_CLEAR_TFF();
/* Send write enable command */
- SMI_WRITE_REG(SMI_CR2, spearsmi_info->bank_num | SMI_WE);
+ SMI_WRITE_REG(SMI_CR2, stmsmi_info->bank_num | SMI_WE);
/* Poll transmit finished flag */
SMI_POLL_TFF(SMI_CMD_TIMEOUT);
@@ -334,7 +334,7 @@ static int smi_write_enable(struct flash_bank *bank)
return ERROR_OK;
}
-static uint32_t erase_command(struct spearsmi_flash_bank *spearsmi_info,
+static uint32_t erase_command(struct stmsmi_flash_bank *stmsmi_info,
uint32_t offset)
{
union {
@@ -342,7 +342,7 @@ static uint32_t erase_command(struct spearsmi_flash_bank *spearsmi_info,
uint8_t x[4];
} cmd;
- cmd.x[0] = spearsmi_info->dev->erase_cmd;
+ cmd.x[0] = stmsmi_info->dev->erase_cmd;
cmd.x[1] = offset >> 16;
cmd.x[2] = offset >> 8;
cmd.x[3] = offset;
@@ -353,8 +353,8 @@ static uint32_t erase_command(struct spearsmi_flash_bank *spearsmi_info,
static int smi_erase_sector(struct flash_bank *bank, int sector)
{
struct target *target = bank->target;
- struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv;
- uint32_t io_base = spearsmi_info->io_base;
+ struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
+ uint32_t io_base = stmsmi_info->io_base;
uint32_t cmd;
int retval;
@@ -369,9 +369,9 @@ static int smi_erase_sector(struct flash_bank *bank, int sector)
SMI_CLEAR_TFF();
/* send SPI command "block erase" */
- cmd = erase_command(spearsmi_info, bank->sectors[sector].offset);
+ cmd = erase_command(stmsmi_info, bank->sectors[sector].offset);
SMI_WRITE_REG(SMI_TR, cmd);
- SMI_WRITE_REG(SMI_CR2, spearsmi_info->bank_num | SMI_SEND | SMI_TX_LEN_4);
+ SMI_WRITE_REG(SMI_CR2, stmsmi_info->bank_num | SMI_SEND | SMI_TX_LEN_4);
/* Poll transmit finished flag */
SMI_POLL_TFF(SMI_CMD_TIMEOUT);
@@ -384,11 +384,11 @@ static int smi_erase_sector(struct flash_bank *bank, int sector)
return ERROR_OK;
}
-static int spearsmi_erase(struct flash_bank *bank, int first, int last)
+static int stmsmi_erase(struct flash_bank *bank, int first, int last)
{
struct target *target = bank->target;
- struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv;
- uint32_t io_base = spearsmi_info->io_base;
+ struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
+ uint32_t io_base = stmsmi_info->io_base;
int retval = ERROR_OK;
int sector;
@@ -406,7 +406,7 @@ static int spearsmi_erase(struct flash_bank *bank, int first, int last)
return ERROR_FLASH_SECTOR_INVALID;
}
- if (!(spearsmi_info->probed))
+ if (!(stmsmi_info->probed))
{
LOG_ERROR("Flash bank not probed");
return ERROR_FLASH_BANK_NOT_PROBED;
@@ -434,7 +434,7 @@ static int spearsmi_erase(struct flash_bank *bank, int first, int last)
return retval;
}
-static int spearsmi_protect(struct flash_bank *bank, int set,
+static int stmsmi_protect(struct flash_bank *bank, int set,
int first, int last)
{
int sector;
@@ -448,8 +448,8 @@ static int smi_write_buffer(struct flash_bank *bank, uint8_t *buffer,
uint32_t address, uint32_t len)
{
struct target *target = bank->target;
- struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv;
- uint32_t io_base = spearsmi_info->io_base;
+ struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
+ uint32_t io_base = stmsmi_info->io_base;
int retval;
LOG_DEBUG("%s: address=0x%08" PRIx32 " len=0x%08" PRIx32,
@@ -469,12 +469,12 @@ static int smi_write_buffer(struct flash_bank *bank, uint8_t *buffer,
return ERROR_OK;
}
-static int spearsmi_write(struct flash_bank *bank, uint8_t *buffer,
+static int stmsmi_write(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
- struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv;
- uint32_t io_base = spearsmi_info->io_base;
+ struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
+ uint32_t io_base = stmsmi_info->io_base;
uint32_t cur_count, page_size, page_offset;
int sector;
int retval = ERROR_OK;
@@ -488,10 +488,10 @@ static int spearsmi_write(struct flash_bank *bank, uint8_t *buffer,
return ERROR_TARGET_NOT_HALTED;
}
- if (offset + count > spearsmi_info->dev->size_in_bytes)
+ if (offset + count > stmsmi_info->dev->size_in_bytes)
{
LOG_WARNING("Write pasts end of flash. Extra data discarded.");
- count = spearsmi_info->dev->size_in_bytes - offset;
+ count = stmsmi_info->dev->size_in_bytes - offset;
}
/* Check sector protection */
@@ -509,7 +509,7 @@ static int spearsmi_write(struct flash_bank *bank, uint8_t *buffer,
}
}
- page_size = spearsmi_info->dev->pagesize;
+ page_size = stmsmi_info->dev->pagesize;
/* unaligned buffer head */
if (count > 0 && (offset & 3) != 0)
@@ -564,8 +564,8 @@ err:
static int read_flash_id(struct flash_bank *bank, uint32_t *id)
{
struct target *target = bank->target;
- struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv;
- uint32_t io_base = spearsmi_info->io_base;
+ struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
+ uint32_t io_base = stmsmi_info->io_base;
int retval;
if (target->state != TARGET_HALTED)
@@ -588,7 +588,7 @@ static int read_flash_id(struct flash_bank *bank, uint32_t *id)
/* Send SPI command "read ID" */
SMI_WRITE_REG(SMI_TR, SMI_READ_ID);
SMI_WRITE_REG(SMI_CR2,
- spearsmi_info->bank_num | SMI_SEND | SMI_RX_LEN_3 | SMI_TX_LEN_1);
+ stmsmi_info->bank_num | SMI_SEND | SMI_RX_LEN_3 | SMI_TX_LEN_1);
/* Poll transmit finished flag */
SMI_POLL_TFF(SMI_CMD_TIMEOUT);
@@ -601,19 +601,19 @@ static int read_flash_id(struct flash_bank *bank, uint32_t *id)
return ERROR_OK;
}
-static int spearsmi_probe(struct flash_bank *bank)
+static int stmsmi_probe(struct flash_bank *bank)
{
struct target *target = bank->target;
- struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv;
+ struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
uint32_t io_base;
struct flash_sector *sectors;
uint32_t id = 0; /* silence uninitialized warning */
- struct spearsmi_target *target_device;
+ struct stmsmi_target *target_device;
int retval;
- if (spearsmi_info->probed)
+ if (stmsmi_info->probed)
free(bank->sectors);
- spearsmi_info->probed = 0;
+ stmsmi_info->probed = 0;
for (target_device=target_devices ; target_device->name ; ++target_device)
if (target_device->tap_idcode == target->tap->idcode)
@@ -628,23 +628,23 @@ static int spearsmi_probe(struct flash_bank *bank)
switch (bank->base - target_device->smi_base)
{
case 0:
- spearsmi_info->bank_num = SMI_SEL_BANK0;
+ stmsmi_info->bank_num = SMI_SEL_BANK0;
break;
case SMI_BANK_SIZE:
- spearsmi_info->bank_num = SMI_SEL_BANK1;
+ stmsmi_info->bank_num = SMI_SEL_BANK1;
break;
case 2*SMI_BANK_SIZE:
- spearsmi_info->bank_num = SMI_SEL_BANK2;
+ stmsmi_info->bank_num = SMI_SEL_BANK2;
break;
case 3*SMI_BANK_SIZE:
- spearsmi_info->bank_num = SMI_SEL_BANK3;
+ stmsmi_info->bank_num = SMI_SEL_BANK3;
break;
default:
LOG_ERROR("Invalid SMI base address 0x%" PRIx32, bank->base);
return ERROR_FAIL;
}
io_base = target_device->io_base;
- spearsmi_info->io_base = io_base;
+ stmsmi_info->io_base = io_base;
LOG_DEBUG("Valid SMI on device %s at address 0x%" PRIx32,
target_device->name, bank->base);
@@ -655,28 +655,28 @@ static int spearsmi_probe(struct flash_bank *bank)
if (retval != ERROR_OK)
return retval;
- spearsmi_info->dev = NULL;
+ stmsmi_info->dev = NULL;
for (struct flash_device *p = flash_devices; p->name ; p++)
if (p->device_id == id) {
- spearsmi_info->dev = p;
+ stmsmi_info->dev = p;
break;
}
- if (!spearsmi_info->dev)
+ if (!stmsmi_info->dev)
{
LOG_ERROR("Unknown flash device (ID 0x%08" PRIx32 ")", id);
return ERROR_FAIL;
}
LOG_INFO("Found flash device \'%s\' (ID 0x%08" PRIx32 ")",
- spearsmi_info->dev->name, spearsmi_info->dev->device_id);
+ stmsmi_info->dev->name, stmsmi_info->dev->device_id);
/* Set correct size value */
- bank->size = spearsmi_info->dev->size_in_bytes;
+ bank->size = stmsmi_info->dev->size_in_bytes;
/* create and fill sectors array */
bank->num_sectors =
- spearsmi_info->dev->size_in_bytes / spearsmi_info->dev->sectorsize;
+ stmsmi_info->dev->size_in_bytes / stmsmi_info->dev->sectorsize;
sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
if (sectors == NULL)
{
@@ -686,62 +686,62 @@ static int spearsmi_probe(struct flash_bank *bank)
for (int sector = 0; sector < bank->num_sectors; sector++)
{
- sectors[sector].offset = sector * spearsmi_info->dev->sectorsize;
- sectors[sector].size = spearsmi_info->dev->sectorsize;
+ sectors[sector].offset = sector * stmsmi_info->dev->sectorsize;
+ sectors[sector].size = stmsmi_info->dev->sectorsize;
sectors[sector].is_erased = -1;
sectors[sector].is_protected = 1;
}
bank->sectors = sectors;
- spearsmi_info->probed = 1;
+ stmsmi_info->probed = 1;
return ERROR_OK;
}
-static int spearsmi_auto_probe(struct flash_bank *bank)
+static int stmsmi_auto_probe(struct flash_bank *bank)
{
- struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv;
- if (spearsmi_info->probed)
+ struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
+ if (stmsmi_info->probed)
return ERROR_OK;
- return spearsmi_probe(bank);
+ return stmsmi_probe(bank);
}
-static int spearsmi_protect_check(struct flash_bank *bank)
+static int stmsmi_protect_check(struct flash_bank *bank)
{
/* Nothing to do. Protection is only handled in SW. */
return ERROR_OK;
}
-static int get_spearsmi_info(struct flash_bank *bank, char *buf, int buf_size)
+static int get_stmsmi_info(struct flash_bank *bank, char *buf, int buf_size)
{
- struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv;
+ struct stmsmi_flash_bank *stmsmi_info = bank->driver_priv;
int printed;
- if (!(spearsmi_info->probed))
+ if (!(stmsmi_info->probed))
{
printed = snprintf(buf, buf_size,
- "\nSPEAr SMI flash bank not probed yet\n");
+ "\nSMI flash bank not probed yet\n");
return ERROR_OK;
}
- printed = snprintf(buf, buf_size, "\nSPEAr SMI flash information:\n"
+ printed = snprintf(buf, buf_size, "\nSMI flash information:\n"
" Device \'%s\' (ID 0x%08x)\n",
- spearsmi_info->dev->name, spearsmi_info->dev->device_id);
+ stmsmi_info->dev->name, stmsmi_info->dev->device_id);
buf += printed;
buf_size -= printed;
return ERROR_OK;
}
-struct flash_driver spearsmi_flash = {
- .name = "spearsmi",
- .flash_bank_command = spearsmi_flash_bank_command,
- .erase = spearsmi_erase,
- .protect = spearsmi_protect,
- .write = spearsmi_write,
+struct flash_driver stmsmi_flash = {
+ .name = "stmsmi",
+ .flash_bank_command = stmsmi_flash_bank_command,
+ .erase = stmsmi_erase,
+ .protect = stmsmi_protect,
+ .write = stmsmi_write,
.read = default_flash_read,
- .probe = spearsmi_probe,
- .auto_probe = spearsmi_auto_probe,
+ .probe = stmsmi_probe,
+ .auto_probe = stmsmi_auto_probe,
.erase_check = default_flash_blank_check,
- .protect_check = spearsmi_protect_check,
- .info = get_spearsmi_info,
+ .protect_check = stmsmi_protect_check,
+ .info = get_stmsmi_info,
};
diff --git a/tcl/board/spear310evb20.cfg b/tcl/board/spear310evb20.cfg
index 70783f5..b546eb6 100644
--- a/tcl/board/spear310evb20.cfg
+++ b/tcl/board/spear310evb20.cfg
@@ -27,7 +27,7 @@ flash bank $_FLASHNAME0 cfi 0x50000000 0x01000000 2 4 $_TARGETNAME
# Serial NOR on SMI CS0. 8Mbyte.
set _FLASHNAME1 $_CHIPNAME.snor
-flash bank $_FLASHNAME1 spearsmi 0xf8000000 0 0 0 $_TARGETNAME
+flash bank $_FLASHNAME1 stmsmi 0xf8000000 0 0 0 $_TARGETNAME
if { [info exists BOARD_HAS_SRST] } {
# Modified board has SRST on JTAG connector
diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg
index 2fabc12..686aede 100644
--- a/tcl/target/str750.cfg
+++ b/tcl/target/str750.cfg
@@ -61,7 +61,7 @@ flash bank $_FLASHNAME str7x 0x200C0000 0x00004000 0 0 $_TARGETNAME STR75x
# Serial NOR on SMI CS0.
set _FLASHNAME $_CHIPNAME.snor
-flash bank $_FLASHNAME spearsmi 0x80000000 0 0 0 $_TARGETNAME
+flash bank $_FLASHNAME stmsmi 0x80000000 0 0 0 $_TARGETNAME
source [find mem_helper.tcl]
generated by cgit v1.1 at 2024-11-06 04:23:33 +0000