aboutsummaryrefslogtreecommitdiff
path: root/tcl
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2009-11-09 13:16:32 -0800
committerDavid Brownell <dbrownell@users.sourceforge.net>2009-11-09 13:16:32 -0800
commitd70d9634bf6ab73ec4f2ac1e77012785770b460a (patch)
treee2cfbb23ab2a145dbd465832415de867904c247f /tcl
parent9253ce9baea6f7b5ef3fc53b4bc0cfbff48194f4 (diff)
downloadriscv-openocd-d70d9634bf6ab73ec4f2ac1e77012785770b460a.zip
riscv-openocd-d70d9634bf6ab73ec4f2ac1e77012785770b460a.tar.gz
riscv-openocd-d70d9634bf6ab73ec4f2ac1e77012785770b460a.tar.bz2
finish removing deprecated/obsolete commands
It's been about a year since these were deprecated and, in most cases, removed. There's no point in carrying that documentation, or backwards compatibility for "jtag_device" and "jtag_speed", around forever. (Or a few remnants of obsolete code...) Removed a few obsolete uses of "jtag_speed": - The Calao stuff hasn't worked since July 2008. (Those Atmel targets need to work with a 32KHz core clock after reset until board-specific init-reset code sets up the PLL and enables a faster JTAg clock.) - Parport speed controls don't actually work (tops out at about 1 MHz on typical HW). - In general, speed controls need to live in board.cfg files (or sometimes target.cfg files), not interface.cfg ... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'tcl')
-rw-r--r--tcl/board/topas910.cfg2
-rw-r--r--tcl/board/topasa900.cfg2
-rw-r--r--tcl/interface/calao-usb-a9260.cfg5
-rw-r--r--tcl/interface/openocd-usb.cfg3
-rw-r--r--tcl/interface/parport.cfg1
-rw-r--r--tcl/interface/parport_dlc5.cfg1
6 files changed, 2 insertions, 12 deletions
diff --git a/tcl/board/topas910.cfg b/tcl/board/topas910.cfg
index 01ace63..ce7c87a 100644
--- a/tcl/board/topas910.cfg
+++ b/tcl/board/topas910.cfg
@@ -99,7 +99,7 @@ proc topas910_init { } {
mww 0xf4300004 0x00000000
sleep 10
-# jtag_speed 10000
+# jtag_khz NNNN
# remap off in case of IROM boot
mww 0xf0000004 0x00000001
diff --git a/tcl/board/topasa900.cfg b/tcl/board/topasa900.cfg
index 699b42e..a8a6caf 100644
--- a/tcl/board/topasa900.cfg
+++ b/tcl/board/topasa900.cfg
@@ -105,7 +105,7 @@ proc topasa900_init { } {
mww 0xf4300004 0x00000000
sleep 10
-# jtag_speed 10000
+# jtag_khz NNNN
# remap off in case of IROM boot
mww 0xf0000004 0x00000001
diff --git a/tcl/interface/calao-usb-a9260.cfg b/tcl/interface/calao-usb-a9260.cfg
index 57c68d6..a9d7dec 100644
--- a/tcl/interface/calao-usb-a9260.cfg
+++ b/tcl/interface/calao-usb-a9260.cfg
@@ -5,12 +5,7 @@
#
# See calao-usb-a9260-c01.cfg and calao-usb-a9260-c02.cfg.
#
-# Note: You must have an OpenOCD version where jtag_speed sets two values.
-# trunk r606 contains the fix for this particular issue which can
-# be seen if jtag_speed does not set two separate values.
-#
-jtag_speed 1200 0
jtag_nsrst_delay 200
jtag_ntrst_delay 200
diff --git a/tcl/interface/openocd-usb.cfg b/tcl/interface/openocd-usb.cfg
index 8bb9ffe..4000b23 100644
--- a/tcl/interface/openocd-usb.cfg
+++ b/tcl/interface/openocd-usb.cfg
@@ -9,6 +9,3 @@ ft2232_vid_pid 0x0403 0x6010
ft2232_device_desc "Dual RS232"
ft2232_layout "oocdlink"
ft2232_latency 2
-# 6/(1+n) Mhz TCLK
-jtag_speed 1
-
diff --git a/tcl/interface/parport.cfg b/tcl/interface/parport.cfg
index 6aaf80b..2a2668d 100644
--- a/tcl/interface/parport.cfg
+++ b/tcl/interface/parport.cfg
@@ -5,5 +5,4 @@
interface parport
parport_port 0xc8b8
parport_cable wiggler
-jtag_speed 0
diff --git a/tcl/interface/parport_dlc5.cfg b/tcl/interface/parport_dlc5.cfg
index defda3f..0f94c65 100644
--- a/tcl/interface/parport_dlc5.cfg
+++ b/tcl/interface/parport_dlc5.cfg
@@ -7,5 +7,4 @@
interface parport
parport_port /dev/parport0
parport_cable dlc5
-jtag_speed 0