diff options
author | Tarek BOCHKATI <tarek.bouchkati@gmail.com> | 2020-03-09 15:10:17 +0100 |
---|---|---|
committer | Tomas Vanek <vanekt@fbl.cz> | 2020-03-23 21:52:10 +0000 |
commit | c999fcef3e96fbdb5226b0913bddf29365566ce8 (patch) | |
tree | f0a4069b1c2d0dd6e14901776e4a5501ef43839d /tcl | |
parent | 4b4389a2d69d96e08d2b417e47c24cad6b50a5c5 (diff) | |
download | riscv-openocd-c999fcef3e96fbdb5226b0913bddf29365566ce8.zip riscv-openocd-c999fcef3e96fbdb5226b0913bddf29365566ce8.tar.gz riscv-openocd-c999fcef3e96fbdb5226b0913bddf29365566ce8.tar.bz2 |
flash/stm32l4x: add support of STM32WLEx devices
STM32WLEx devices are based on arm Cortex-M4 running at 48MHz,
contains a single bank of maximum 256 Kbytes of flash memory.
there is 3 variants with different Flash/RAM sizes:
STM32WLE5JC : 256K/64K
STM32WLE5JB : 128K/48K
STM32WLE5J8 : 64K/20K
the work-area size is set to 20 kb to fit in STM32WLE5J8
Change-Id: Ie8e186fe4be97cbc25c53ef0ade4b4dbbcee6f66
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/5450
Tested-by: jenkins
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Diffstat (limited to 'tcl')
-rw-r--r-- | tcl/target/stm32wlx.cfg | 100 |
1 files changed, 100 insertions, 0 deletions
diff --git a/tcl/target/stm32wlx.cfg b/tcl/target/stm32wlx.cfg new file mode 100644 index 0000000..98c9a7e --- /dev/null +++ b/tcl/target/stm32wlx.cfg @@ -0,0 +1,100 @@ +# script for stm32wlx family + +# +# stm32wl devices support both JTAG and SWD transports. +# +source [find target/swj-dp.tcl] +source [find mem_helper.tcl] + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME stm32wlx +} + +set _ENDIAN little + +# Work-area is a space in RAM used for flash programming +# By default use 20kB +if { [info exists WORKAREASIZE] } { + set _WORKAREASIZE $WORKAREASIZE +} else { + set _WORKAREASIZE 0x5000 +} + +#jtag scan chain +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + if { [using_jtag] } { + set _CPUTAPID 0x6ba00477 + } else { + # SWD IDCODE (single drop, arm) + set _CPUTAPID 0x6ba02477 + } +} + +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID +dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu + +if {[using_jtag]} { + swj_newdap $_CHIPNAME bs -irlen 5 +} + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap + +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 + +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME stm32l4x 0 0 0 0 $_TARGETNAME + +# Common knowledges tells JTAG speed should be <= F_CPU/6. +# F_CPU after reset is MSI 4MHz, so use F_JTAG = 500 kHz to stay on +# the safe side. +# +# Note that there is a pretty wide band where things are +# more or less stable, see http://openocd.zylin.com/#/c/3366/ +adapter speed 500 + +adapter srst delay 100 +if {[using_jtag]} { + jtag_ntrst_delay 100 +} + +reset_config srst_nogate + +if {![using_hla]} { + # if srst is not fitted use SYSRESETREQ to + # perform a soft reset + cortex_m reset_config sysresetreq +} + +$_TARGETNAME configure -event reset-init { + # CPU comes out of reset with MSI_ON | MSI_RDY | MSI Range 4 MHz. + # Configure system to use MSI 24 MHz clock, compliant with VOS default Range1. + # 2 WS compliant with VOS=Range1 and 24 MHz. + mmw 0x58004000 0x00000102 0 ;# FLASH_ACR |= PRFTEN | 2(Latency) + mmw 0x58000000 0x00000091 0 ;# RCC_CR = MSI_ON | MSI Range 24 MHz + # Boost JTAG frequency + adapter speed 4000 +} + +$_TARGETNAME configure -event reset-start { + # Reset clock is MSI (4 MHz) + adapter speed 500 +} + +$_TARGETNAME configure -event examine-end { + # Enable debug during low power modes (uses more power) + # DBGMCU_CR |= DBG_STANDBY | DBG_STOP | DBG_SLEEP + mmw 0xE0042004 0x00000007 0 + + # Stop watchdog counters during halt + # DBGMCU_APB1_FZR1 |= DBG_IWDG_STOP | DBG_WWDG_STOP + mmw 0xE004203C 0x00001800 0 +} + +$_TARGETNAME configure -event trace-config { + # nothing to do +} |