diff options
| author | Uwe Hermann <uwe@hermann-uwe.de> | 2012-04-02 00:25:37 +0200 |
|---|---|---|
| committer | Peter Stuge <peter@stuge.se> | 2012-04-02 00:02:56 +0000 |
| commit | 1748aab2c9202783a723f6d58a204a57f1094663 (patch) | |
| tree | bfd61679bea7e17ee447dabf3ea1de9e2f370f3a /tcl | |
| parent | d40cb56d494d08bbb9a0642c73b965466ee6e0e8 (diff) | |
| download | riscv-openocd-1748aab2c9202783a723f6d58a204a57f1094663.zip riscv-openocd-1748aab2c9202783a723f6d58a204a57f1094663.tar.gz riscv-openocd-1748aab2c9202783a723f6d58a204a57f1094663.tar.bz2 | |
Initial config for the Voltcraft DSO-3062C.
This is a digital oscilloscope which uses a Samsung S3C2440 internally.
http://randomprojects.org/wiki/Voltcraft_DSO-3062C
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Change-Id: I5e28c3a8f30665a162e34c831294e4e658a16ebb
Reviewed-on: http://openocd.zylin.com/548
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
Diffstat (limited to 'tcl')
| -rw-r--r-- | tcl/board/voltcraft_dso-3062c.cfg | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/tcl/board/voltcraft_dso-3062c.cfg b/tcl/board/voltcraft_dso-3062c.cfg new file mode 100644 index 0000000..01e37e9 --- /dev/null +++ b/tcl/board/voltcraft_dso-3062c.cfg @@ -0,0 +1,31 @@ +# +# Voltcraft DSO-3062C digital oscilloscope (uses a Samsung S3C2440) +# +# http://www.eevblog.com/forum/general-chat/hantek-tekway-dso-hack-get-200mhz-bw-for-free/ +# http://www.mikrocontroller.net/topic/249628 +# http://elinux.org/Das_Oszi +# http://randomprojects.org/wiki/Voltcraft_DSO-3062C +# + +# Enable this if your JTAG adapter supports multiple transports (JTAG or SWD). +# Otherwise comment it out, as it will cause an OpenOCD error. +### transport select jtag + +source [find target/samsung_s3c2440.cfg] + +adapter_khz 16000 + +# Samsung K9F1208U0C NAND flash chip (64MiB, 3.3V, 8-bit) +nand device $_CHIPNAME.nand s3c2440 $_TARGETNAME + +# arm7_9 fast_memory_access enable +# arm7_9 dcc_downloads enable + +init +reset +halt +scan_chain +targets +nand probe 0 +nand list + |