flash/nor: Add support for TI CC26xx/CC13xx flash

Added cc26xx flash driver to support the TI CC26xx and CC13xx
microcontrollers. Driver is capable of determining which MCU
is connected and configures itself accordingly. Added config
files for four specific variants: CC26x0, CC13x0, CC26x2, and
CC13x2.

Note that the flash loader code is based on the sources used
to support flash in Code Composer Studio and Uniflash from TI.

Removed cc26xx.cfg file made obsolete by this patch.

Change-Id: Ie2b0f74f8af7517a9184704b839677d1c9787862
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4358
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Fredrik Hederstierna <fredrik@hederstierna.com>

4 files changed, 672 insertions, 0 deletions

diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am
index 5e5cdcd..9918698 100644
--- a/src/flash/nor/Makefile.am
+++ b/src/flash/nor/Makefile.am
@@ -20,6 +20,7 @@ NOR_DRIVERS = \
 	%D%/avrf.c \
 	%D%/bluenrg-x.c \
 	%D%/cc3220sf.c \
+	%D%/cc26xx.c \
 	%D%/cfi.c \
 	%D%/dsp5680xx_flash.c \
 	%D%/efm32.c \
@@ -66,6 +67,7 @@ NOR_DRIVERS = \
 NORHEADERS = \
 	%D%/core.h \
 	%D%/cc3220sf.h \
+	%D%/cc26xx.h \
 	%D%/cfi.h \
 	%D%/driver.h \
 	%D%/imp.h \
diff --git a/src/flash/nor/cc26xx.c b/src/flash/nor/cc26xx.c
new file mode 100644
index 0000000..e6e9e59
--- /dev/null
+++ b/src/flash/nor/cc26xx.c
@@ -0,0 +1,567 @@
+/***************************************************************************
+ *   Copyright (C) 2017 by Texas Instruments, Inc.                         *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "imp.h"
+#include "cc26xx.h"
+#include <helper/binarybuffer.h>
+#include <helper/time_support.h>
+#include <target/algorithm.h>
+#include <target/armv7m.h>
+#include <target/image.h>
+
+#define FLASH_TIMEOUT 8000
+
+struct cc26xx_bank {
+	const char *family_name;
+	uint32_t icepick_id;
+	uint32_t user_id;
+	uint32_t device_type;
+	uint32_t sector_length;
+	bool probed;
+	struct working_area *working_area;
+	struct armv7m_algorithm armv7m_info;
+	const uint8_t *algo_code;
+	uint32_t algo_size;
+	uint32_t algo_working_size;
+	uint32_t buffer_addr[2];
+	uint32_t params_addr[2];
+};
+
+static int cc26xx_auto_probe(struct flash_bank *bank);
+
+static uint32_t cc26xx_device_type(uint32_t icepick_id, uint32_t user_id)
+{
+	uint32_t device_type = 0;
+
+	switch (icepick_id & ICEPICK_ID_MASK) {
+		case CC26X0_ICEPICK_ID:
+			device_type = CC26X0_TYPE;
+			break;
+		case CC26X1_ICEPICK_ID:
+			device_type = CC26X1_TYPE;
+			break;
+		case CC13X0_ICEPICK_ID:
+			device_type = CC13X0_TYPE;
+			break;
+		case CC13X2_CC26X2_ICEPICK_ID:
+		default:
+			if ((user_id & USER_ID_CC13_MASK) != 0)
+				device_type = CC13X2_TYPE;
+			else
+				device_type = CC26X2_TYPE;
+			break;
+	}
+
+	return device_type;
+}
+
+static uint32_t cc26xx_sector_length(uint32_t icepick_id)
+{
+	uint32_t sector_length;
+
+	switch (icepick_id & ICEPICK_ID_MASK) {
+		case CC26X0_ICEPICK_ID:
+		case CC26X1_ICEPICK_ID:
+		case CC13X0_ICEPICK_ID:
+			/* Chameleon family device */
+			sector_length = CC26X0_SECTOR_LENGTH;
+			break;
+		case CC13X2_CC26X2_ICEPICK_ID:
+		default:
+			/* Agama family device */
+			sector_length = CC26X2_SECTOR_LENGTH;
+			break;
+	}
+
+	return sector_length;
+}
+
+static int cc26xx_wait_algo_done(struct flash_bank *bank, uint32_t params_addr)
+{
+	struct target *target = bank->target;
+	struct cc26xx_bank *cc26xx_bank = bank->driver_priv;
+
+	uint32_t status_addr = params_addr + CC26XX_STATUS_OFFSET;
+	uint32_t status = CC26XX_BUFFER_FULL;
+	long long start_ms;
+	long long elapsed_ms;
+
+	int retval = ERROR_OK;
+
+	start_ms = timeval_ms();
+	while (CC26XX_BUFFER_FULL == status) {
+		retval = target_read_u32(target, status_addr, &status);
+		if (ERROR_OK != retval)
+			return retval;
+
+		elapsed_ms = timeval_ms() - start_ms;
+		if (elapsed_ms > 500)
+			keep_alive();
+		if (elapsed_ms > FLASH_TIMEOUT)
+			break;
+	};
+
+	if (CC26XX_BUFFER_EMPTY != status) {
+		LOG_ERROR("%s: Flash operation failed", cc26xx_bank->family_name);
+		return ERROR_FAIL;
+	}
+
+	return ERROR_OK;
+}
+
+static int cc26xx_init(struct flash_bank *bank)
+{
+	struct target *target = bank->target;
+	struct cc26xx_bank *cc26xx_bank = bank->driver_priv;
+
+	int retval;
+
+	/* Make sure we've probed the flash to get the device and size */
+	retval = cc26xx_auto_probe(bank);
+	if (ERROR_OK != retval)
+		return retval;
+
+	/* Check for working area to use for flash helper algorithm */
+	if (NULL != cc26xx_bank->working_area)
+		target_free_working_area(target, cc26xx_bank->working_area);
+	retval = target_alloc_working_area(target, cc26xx_bank->algo_working_size,
+				&cc26xx_bank->working_area);
+	if (ERROR_OK != retval)
+		return retval;
+
+	/* Confirm the defined working address is the area we need to use */
+	if (CC26XX_ALGO_BASE_ADDRESS != cc26xx_bank->working_area->address)
+		return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+
+	/* Write flash helper algorithm into target memory */
+	retval = target_write_buffer(target, CC26XX_ALGO_BASE_ADDRESS,
+				cc26xx_bank->algo_size, cc26xx_bank->algo_code);
+	if (ERROR_OK != retval) {
+		LOG_ERROR("%s: Failed to load flash helper algorithm",
+			cc26xx_bank->family_name);
+		target_free_working_area(target, cc26xx_bank->working_area);
+		return retval;
+	}
+
+	/* Initialize the ARMv7 specific info to run the algorithm */
+	cc26xx_bank->armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+	cc26xx_bank->armv7m_info.core_mode = ARM_MODE_THREAD;
+
+	/* Begin executing the flash helper algorithm */
+	retval = target_start_algorithm(target, 0, NULL, 0, NULL,
+				CC26XX_ALGO_BASE_ADDRESS, 0, &cc26xx_bank->armv7m_info);
+	if (ERROR_OK != retval) {
+		LOG_ERROR("%s: Failed to start flash helper algorithm",
+			cc26xx_bank->family_name);
+		target_free_working_area(target, cc26xx_bank->working_area);
+		return retval;
+	}
+
+	/*
+	 * At this point, the algorithm is running on the target and
+	 * ready to receive commands and data to flash the target
+	 */
+
+	return retval;
+}
+
+static int cc26xx_quit(struct flash_bank *bank)
+{
+	struct target *target = bank->target;
+	struct cc26xx_bank *cc26xx_bank = bank->driver_priv;
+
+	int retval;
+
+	/* Regardless of the algo's status, attempt to halt the target */
+	(void)target_halt(target);
+
+	/* Now confirm target halted and clean up from flash helper algorithm */
+	retval = target_wait_algorithm(target, 0, NULL, 0, NULL, 0, FLASH_TIMEOUT,
+				&cc26xx_bank->armv7m_info);
+
+	target_free_working_area(target, cc26xx_bank->working_area);
+	cc26xx_bank->working_area = NULL;
+
+	return retval;
+}
+
+static int cc26xx_mass_erase(struct flash_bank *bank)
+{
+	struct target *target = bank->target;
+	struct cc26xx_bank *cc26xx_bank = bank->driver_priv;
+	struct cc26xx_algo_params algo_params;
+
+	int retval;
+
+	if (TARGET_HALTED != target->state) {
+		LOG_ERROR("Target not halted");
+		return ERROR_TARGET_NOT_HALTED;
+	}
+
+	retval = cc26xx_init(bank);
+	if (ERROR_OK != retval)
+		return retval;
+
+	/* Initialize algorithm parameters */
+	buf_set_u32(algo_params.address, 0, 32, 0);
+	buf_set_u32(algo_params.length,  0, 32, 4);
+	buf_set_u32(algo_params.command, 0, 32, CC26XX_CMD_ERASE_ALL);
+	buf_set_u32(algo_params.status,  0, 32, CC26XX_BUFFER_FULL);
+
+	/* Issue flash helper algorithm parameters for mass erase */
+	retval = target_write_buffer(target, cc26xx_bank->params_addr[0],
+				sizeof(algo_params), (uint8_t *)&algo_params);
+
+	/* Wait for command to complete */
+	if (ERROR_OK == retval)
+		retval = cc26xx_wait_algo_done(bank, cc26xx_bank->params_addr[0]);
+
+	/* Regardless of errors, try to close down algo */
+	(void)cc26xx_quit(bank);
+
+	return retval;
+}
+
+FLASH_BANK_COMMAND_HANDLER(cc26xx_flash_bank_command)
+{
+	struct cc26xx_bank *cc26xx_bank;
+
+	if (CMD_ARGC < 6)
+		return ERROR_COMMAND_SYNTAX_ERROR;
+
+	cc26xx_bank = malloc(sizeof(struct cc26xx_bank));
+	if (NULL == cc26xx_bank)
+		return ERROR_FAIL;
+
+	/* Initialize private flash information */
+	memset((void *)cc26xx_bank, 0x00, sizeof(struct cc26xx_bank));
+	cc26xx_bank->family_name = "cc26xx";
+	cc26xx_bank->device_type = CC26XX_NO_TYPE;
+	cc26xx_bank->sector_length = 0x1000;
+
+	/* Finish initialization of bank */
+	bank->driver_priv = cc26xx_bank;
+	bank->next = NULL;
+
+	return ERROR_OK;
+}
+
+static int cc26xx_erase(struct flash_bank *bank, int first, int last)
+{
+	struct target *target = bank->target;
+	struct cc26xx_bank *cc26xx_bank = bank->driver_priv;
+	struct cc26xx_algo_params algo_params;
+
+	uint32_t address;
+	uint32_t length;
+	int retval;
+
+	if (TARGET_HALTED != target->state) {
+		LOG_ERROR("Target not halted");
+		return ERROR_TARGET_NOT_HALTED;
+	}
+
+	/* Do a mass erase if user requested all sectors of flash */
+	if ((first == 0) && (last == (bank->num_sectors - 1))) {
+		/* Request mass erase of flash */
+		return cc26xx_mass_erase(bank);
+	}
+
+	address = first * cc26xx_bank->sector_length;
+	length = (last - first + 1) * cc26xx_bank->sector_length;
+
+	retval = cc26xx_init(bank);
+	if (ERROR_OK != retval)
+		return retval;
+
+	/* Set up algorithm parameters for erase command */
+	buf_set_u32(algo_params.address, 0, 32, address);
+	buf_set_u32(algo_params.length,  0, 32, length);
+	buf_set_u32(algo_params.command, 0, 32, CC26XX_CMD_ERASE_SECTORS);
+	buf_set_u32(algo_params.status,  0, 32, CC26XX_BUFFER_FULL);
+
+	/* Issue flash helper algorithm parameters for erase */
+	retval = target_write_buffer(target, cc26xx_bank->params_addr[0],
+				sizeof(algo_params), (uint8_t *)&algo_params);
+
+	/* If no error, wait for erase to finish */
+	if (ERROR_OK == retval)
+		retval = cc26xx_wait_algo_done(bank, cc26xx_bank->params_addr[0]);
+
+	/* Regardless of errors, try to close down algo */
+	(void)cc26xx_quit(bank);
+
+	return retval;
+}
+
+static int cc26xx_protect(struct flash_bank *bank, int set, int first,
+	int last)
+{
+	return ERROR_OK;
+}
+
+static int cc26xx_write(struct flash_bank *bank, const uint8_t *buffer,
+	uint32_t offset, uint32_t count)
+{
+	struct target *target = bank->target;
+	struct cc26xx_bank *cc26xx_bank = bank->driver_priv;
+	struct cc26xx_algo_params algo_params[2];
+	uint32_t size = 0;
+	long long start_ms;
+	long long elapsed_ms;
+	uint32_t address;
+
+	uint32_t index;
+	int retval;
+
+	if (TARGET_HALTED != target->state) {
+		LOG_ERROR("Target not halted");
+		return ERROR_TARGET_NOT_HALTED;
+	}
+
+	retval = cc26xx_init(bank);
+	if (ERROR_OK != retval)
+		return retval;
+
+	/* Initialize algorithm parameters to default values */
+	buf_set_u32(algo_params[0].command, 0, 32, CC26XX_CMD_PROGRAM);
+	buf_set_u32(algo_params[1].command, 0, 32, CC26XX_CMD_PROGRAM);
+
+	/* Write requested data, ping-ponging between two buffers */
+	index = 0;
+	start_ms = timeval_ms();
+	address = bank->base + offset;
+	while (count > 0) {
+
+		if (count > cc26xx_bank->sector_length)
+			size = cc26xx_bank->sector_length;
+		else
+			size = count;
+
+		/* Put next block of data to flash into buffer */
+		retval = target_write_buffer(target, cc26xx_bank->buffer_addr[index],
+					size, buffer);
+		if (ERROR_OK != retval) {
+			LOG_ERROR("Unable to write data to target memory");
+			break;
+		}
+
+		/* Update algo parameters for next block */
+		buf_set_u32(algo_params[index].address, 0, 32, address);
+		buf_set_u32(algo_params[index].length,  0, 32, size);
+		buf_set_u32(algo_params[index].status,  0, 32, CC26XX_BUFFER_FULL);
+
+		/* Issue flash helper algorithm parameters for block write */
+		retval = target_write_buffer(target, cc26xx_bank->params_addr[index],
+					sizeof(algo_params[index]), (uint8_t *)&algo_params[index]);
+		if (ERROR_OK != retval)
+			break;
+
+		/* Wait for next ping pong buffer to be ready */
+		index ^= 1;
+		retval = cc26xx_wait_algo_done(bank, cc26xx_bank->params_addr[index]);
+		if (ERROR_OK != retval)
+			break;
+
+		count -= size;
+		buffer += size;
+		address += size;
+
+		elapsed_ms = timeval_ms() - start_ms;
+		if (elapsed_ms > 500)
+			keep_alive();
+	}
+
+	/* If no error yet, wait for last buffer to finish */
+	if (ERROR_OK == retval) {
+		index ^= 1;
+		retval = cc26xx_wait_algo_done(bank, cc26xx_bank->params_addr[index]);
+	}
+
+	/* Regardless of errors, try to close down algo */
+	(void)cc26xx_quit(bank);
+
+	return retval;
+}
+
+static int cc26xx_probe(struct flash_bank *bank)
+{
+	struct target *target = bank->target;
+	struct cc26xx_bank *cc26xx_bank = bank->driver_priv;
+
+	uint32_t sector_length;
+	uint32_t value;
+	int num_sectors;
+	int max_sectors;
+
+	int retval;
+
+	retval = target_read_u32(target, FCFG1_ICEPICK_ID, &value);
+	if (ERROR_OK != retval)
+		return retval;
+	cc26xx_bank->icepick_id = value;
+
+	retval = target_read_u32(target, FCFG1_USER_ID, &value);
+	if (ERROR_OK != retval)
+		return retval;
+	cc26xx_bank->user_id = value;
+
+	cc26xx_bank->device_type = cc26xx_device_type(cc26xx_bank->icepick_id,
+		cc26xx_bank->user_id);
+
+	sector_length = cc26xx_sector_length(cc26xx_bank->icepick_id);
+
+	/* Set up appropriate flash helper algorithm */
+	switch (cc26xx_bank->icepick_id & ICEPICK_ID_MASK) {
+		case CC26X0_ICEPICK_ID:
+		case CC26X1_ICEPICK_ID:
+		case CC13X0_ICEPICK_ID:
+			/* Chameleon family device */
+			cc26xx_bank->algo_code = cc26x0_algo;
+			cc26xx_bank->algo_size = sizeof(cc26x0_algo);
+			cc26xx_bank->algo_working_size = CC26X0_WORKING_SIZE;
+			cc26xx_bank->buffer_addr[0] = CC26X0_ALGO_BUFFER_0;
+			cc26xx_bank->buffer_addr[1] = CC26X0_ALGO_BUFFER_1;
+			cc26xx_bank->params_addr[0] = CC26X0_ALGO_PARAMS_0;
+			cc26xx_bank->params_addr[1] = CC26X0_ALGO_PARAMS_1;
+			max_sectors = CC26X0_MAX_SECTORS;
+			break;
+		case CC13X2_CC26X2_ICEPICK_ID:
+		default:
+			/* Agama family device */
+			cc26xx_bank->algo_code = cc26x2_algo;
+			cc26xx_bank->algo_size = sizeof(cc26x2_algo);
+			cc26xx_bank->algo_working_size = CC26X2_WORKING_SIZE;
+			cc26xx_bank->buffer_addr[0] = CC26X2_ALGO_BUFFER_0;
+			cc26xx_bank->buffer_addr[1] = CC26X2_ALGO_BUFFER_1;
+			cc26xx_bank->params_addr[0] = CC26X2_ALGO_PARAMS_0;
+			cc26xx_bank->params_addr[1] = CC26X2_ALGO_PARAMS_1;
+			max_sectors = CC26X2_MAX_SECTORS;
+			break;
+	}
+
+	retval = target_read_u32(target, CC26XX_FLASH_SIZE_INFO, &value);
+	if (ERROR_OK != retval)
+		return retval;
+	num_sectors = value & 0xff;
+	if (num_sectors > max_sectors)
+		num_sectors = max_sectors;
+
+	bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors);
+	if (NULL == bank->sectors)
+		return ERROR_FAIL;
+
+	bank->base = CC26XX_FLASH_BASE_ADDR;
+	bank->num_sectors = num_sectors;
+	bank->size = num_sectors * sector_length;
+	bank->write_start_alignment = 0;
+	bank->write_end_alignment = 0;
+	cc26xx_bank->sector_length = sector_length;
+
+	for (int i = 0; i < num_sectors; i++) {
+		bank->sectors[i].offset = i * sector_length;
+		bank->sectors[i].size = sector_length;
+		bank->sectors[i].is_erased = -1;
+		bank->sectors[i].is_protected = 0;
+	}
+
+	/* We've successfully determined the stats on the flash bank */
+	cc26xx_bank->probed = true;
+
+	/* If we fall through to here, then all went well */
+
+	return ERROR_OK;
+}
+
+static int cc26xx_auto_probe(struct flash_bank *bank)
+{
+	struct cc26xx_bank *cc26xx_bank = bank->driver_priv;
+
+	int retval = ERROR_OK;
+
+	if (bank->bank_number != 0) {
+		/* Invalid bank number somehow */
+		return ERROR_FAIL;
+	}
+
+	if (!cc26xx_bank->probed)
+		retval = cc26xx_probe(bank);
+
+	return retval;
+}
+
+static int cc26xx_protect_check(struct flash_bank *bank)
+{
+	return ERROR_OK;
+}
+
+static int cc26xx_info(struct flash_bank *bank, char *buf, int buf_size)
+{
+	struct cc26xx_bank *cc26xx_bank = bank->driver_priv;
+	int printed = 0;
+	const char *device;
+
+	switch (cc26xx_bank->device_type) {
+		case CC26X0_TYPE:
+			device = "CC26x0";
+			break;
+		case CC26X1_TYPE:
+			device = "CC26x1";
+			break;
+		case CC13X0_TYPE:
+			device = "CC13x0";
+			break;
+		case CC13X2_TYPE:
+			device = "CC13x2";
+			break;
+		case CC26X2_TYPE:
+			device = "CC26x2";
+			break;
+		case CC26XX_NO_TYPE:
+		default:
+			device = "Unrecognized";
+			break;
+	}
+
+	printed = snprintf(buf, buf_size,
+		"%s device: ICEPick ID 0x%08x, USER ID 0x%08x\n",
+		device, cc26xx_bank->icepick_id, cc26xx_bank->user_id);
+
+	if (printed >= buf_size)
+		return ERROR_BUF_TOO_SMALL;
+
+	return ERROR_OK;
+}
+
+struct flash_driver cc26xx_flash = {
+	.name = "cc26xx",
+	.flash_bank_command = cc26xx_flash_bank_command,
+	.erase = cc26xx_erase,
+	.protect = cc26xx_protect,
+	.write = cc26xx_write,
+	.read = default_flash_read,
+	.probe = cc26xx_probe,
+	.auto_probe = cc26xx_auto_probe,
+	.erase_check = default_flash_blank_check,
+	.protect_check = cc26xx_protect_check,
+	.info = cc26xx_info,
+	.free_driver_priv = default_flash_free_driver_priv,
+};
diff --git a/src/flash/nor/cc26xx.h b/src/flash/nor/cc26xx.h
new file mode 100644
index 0000000..51a09f1
--- /dev/null
+++ b/src/flash/nor/cc26xx.h
@@ -0,0 +1,101 @@
+/***************************************************************************
+ *   Copyright (C) 2017 by Texas Instruments, Inc.                         *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
+ ***************************************************************************/
+
+#ifndef OPENOCD_FLASH_NOR_CC26XX_H
+#define OPENOCD_FLASH_NOR_CC26XX_H
+
+/* Addresses of FCFG1 registers to access ICEPick Device ID and User ID */
+#define FCFG1_ICEPICK_ID 0x50001318
+#define FCFG1_USER_ID    0x50001294
+
+/* ICEPick device ID mask and values */
+#define ICEPICK_ID_MASK          0x0fffffff
+#define ICEPICK_REV_MASK         0xf0000000
+#define CC26X0_ICEPICK_ID        0x0b99a02f
+#define CC26X1_ICEPICK_ID        0x0b9bd02f
+#define CC13X0_ICEPICK_ID        0x0b9be02f
+#define CC13X2_CC26X2_ICEPICK_ID 0x0bb4102f
+
+/* User ID mask for Agama CC13x2 vs CC26x2 */
+#define USER_ID_CC13_MASK 0x00800000
+
+/* Common CC26xx/CC13xx flash and memory parameters */
+#define CC26XX_FLASH_BASE_ADDR   0x00000000
+#define CC26XX_FLASH_SIZE_INFO   0x4003002c
+#define CC26XX_SRAM_SIZE_INFO    0x40082250
+#define CC26XX_ALGO_BASE_ADDRESS 0x20000000
+
+/* Chameleon CC26x0/CC13x0 specific parameters */
+#define CC26X0_MAX_SECTORS   32
+#define CC26X0_SECTOR_LENGTH 0x1000
+#define CC26X0_ALGO_BUFFER_0 0x20001c00
+#define CC26X0_ALGO_BUFFER_1 0x20002c00
+#define CC26X0_ALGO_PARAMS_0 0x20001bd8
+#define CC26X0_ALGO_PARAMS_1 0x20001bec
+#define CC26X0_WORKING_SIZE  (CC26X0_ALGO_BUFFER_1 + CC26X0_SECTOR_LENGTH - \
+							 CC26XX_ALGO_BASE_ADDRESS)
+
+/* Agama CC26x2/CC13x2 specific parameters */
+#define CC26X2_MAX_SECTORS   128
+#define CC26X2_SECTOR_LENGTH 0x2000
+#define CC26X2_ALGO_BUFFER_0 0x20002000
+#define CC26X2_ALGO_BUFFER_1 0x20004000
+#define CC26X2_ALGO_PARAMS_0 0x20001fd8
+#define CC26X2_ALGO_PARAMS_1 0x20001fec
+#define CC26X2_WORKING_SIZE  (CC26X2_ALGO_BUFFER_1 + CC26X2_SECTOR_LENGTH - \
+							 CC26XX_ALGO_BASE_ADDRESS)
+
+/* CC26xx flash helper algorithm buffer flags */
+#define CC26XX_BUFFER_EMPTY 0x00000000
+#define CC26XX_BUFFER_FULL  0xffffffff
+
+/* CC26XX flash helper algorithm commands */
+#define CC26XX_CMD_NO_ACTION                     0
+#define CC26XX_CMD_ERASE_ALL                     1
+#define CC26XX_CMD_PROGRAM                       2
+#define CC26XX_CMD_ERASE_AND_PROGRAM             3
+#define CC26XX_CMD_ERASE_AND_PROGRAM_WITH_RETAIN 4
+#define CC26XX_CMD_ERASE_SECTORS                 5
+
+/* CC26xx and CC13xx device types */
+#define CC26XX_NO_TYPE 0 /* Device type not determined yet */
+#define CC26X0_TYPE    1 /* CC26x0 Chameleon device */
+#define CC26X1_TYPE    2 /* CC26x1 Chameleon device */
+#define CC26X2_TYPE    3 /* CC26x2 Agama device */
+#define CC13X0_TYPE    4 /* CC13x0 Chameleon device */
+#define CC13X2_TYPE    5 /* CC13x2 Agama device */
+
+/* Flash helper algorithm parameter block struct */
+#define CC26XX_STATUS_OFFSET 0x0c
+struct cc26xx_algo_params {
+	uint8_t address[4];
+	uint8_t length[4];
+	uint8_t command[4];
+	uint8_t status[4];
+};
+
+/* Flash helper algorithm for CC26x0 Chameleon targets */
+const uint8_t cc26x0_algo[] = {
+#include "../../../contrib/loaders/flash/cc26xx/cc26x0_algo.inc"
+};
+
+/* Flash helper algorithm for CC26x2 Agama targets */
+const uint8_t cc26x2_algo[] = {
+#include "../../../contrib/loaders/flash/cc26xx/cc26x2_algo.inc"
+};
+
+#endif /* OPENOCD_FLASH_NOR_CC26XX_H */
diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c
index 6e1703b..4efbdf7 100644
--- a/src/flash/nor/drivers.c
+++ b/src/flash/nor/drivers.c
@@ -33,6 +33,7 @@ extern struct flash_driver atsamv_flash;
 extern struct flash_driver avr_flash;
 extern struct flash_driver bluenrgx_flash;
 extern struct flash_driver cc3220sf_flash;
+extern struct flash_driver cc26xx_flash;
 extern struct flash_driver cfi_flash;
 extern struct flash_driver dsp5680xx_flash;
 extern struct flash_driver efm32_flash;
@@ -95,6 +96,7 @@ static struct flash_driver *flash_drivers[] = {
 	&avr_flash,
 	&bluenrgx_flash,
 	&cc3220sf_flash,
+	&cc26xx_flash,
 	&cfi_flash,
 	&dsp5680xx_flash,
 	&efm32_flash,