diff options
author | Spencer Oliver <spen@spen-soft.co.uk> | 2012-01-31 17:55:03 +0000 |
---|---|---|
committer | Spencer Oliver <spen@spen-soft.co.uk> | 2012-02-06 10:54:14 +0000 |
commit | 9f0cba528a163645c8ecace413731c23310f2c26 (patch) | |
tree | 521c0e7e19b74d425718aa7cb7266411df301a9c /src/flash/nor/lpc288x.c | |
parent | fab0dcd7e6cb8cfbf63cb41f0978902371d30205 (diff) | |
download | riscv-openocd-9f0cba528a163645c8ecace413731c23310f2c26.zip riscv-openocd-9f0cba528a163645c8ecace413731c23310f2c26.tar.gz riscv-openocd-9f0cba528a163645c8ecace413731c23310f2c26.tar.bz2 |
build: cleanup src/flash/nor directory
Change-Id: Ic299de969ce566282c055ba4dd8b94892c4c4311
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/420
Tested-by: jenkins
Diffstat (limited to 'src/flash/nor/lpc288x.c')
-rw-r--r-- | src/flash/nor/lpc288x.c | 212 |
1 files changed, 84 insertions, 128 deletions
diff --git a/src/flash/nor/lpc288x.c b/src/flash/nor/lpc288x.c index d5fde94..2ecb5b2 100644 --- a/src/flash/nor/lpc288x.c +++ b/src/flash/nor/lpc288x.c @@ -34,64 +34,65 @@ #include "imp.h" #include <helper/binarybuffer.h> +#define LOAD_TIMER_ERASE 0 +#define LOAD_TIMER_WRITE 1 -#define LOAD_TIMER_ERASE 0 -#define LOAD_TIMER_WRITE 1 - -#define FLASH_PAGE_SIZE 512 +#define FLASH_PAGE_SIZE 512 /* LPC288X control registers */ -#define DBGU_CIDR 0x8000507C +#define DBGU_CIDR 0x8000507C /* LPC288X flash registers */ -#define F_CTRL 0x80102000 /* Flash control register R/W 0x5 */ -#define F_STAT 0x80102004 /* Flash status register RO 0x45 */ -#define F_PROG_TIME 0x80102008 /* Flash program time register R/W 0 */ -#define F_WAIT 0x80102010 /* Flash read wait state register R/W 0xC004 */ -#define F_CLK_TIME 0x8010201C /* Flash clock divider for 66 kHz generation R/W 0 */ -#define F_INTEN_CLR 0x80102FD8 /* Clear interrupt enable bits WO - */ -#define F_INTEN_SET 0x80102FDC /* Set interrupt enable bits WO - */ -#define F_INT_STAT 0x80102FE0 /* Interrupt status bits RO 0 */ -#define F_INTEN 0x80102FE4 /* Interrupt enable bits RO 0 */ -#define F_INT_CLR 0x80102FE8 /* Clear interrupt status bits WO */ -#define F_INT_SET 0x80102FEC /* Set interrupt status bits WO - */ -#define FLASH_PD 0x80005030 /* Allows turning off the Flash memory for power savings. R/W 1*/ -#define FLASH_INIT 0x80005034 /* Monitors Flash readiness, such as recovery from Power Down mode. R/W -*/ +#define F_CTRL 0x80102000 /* Flash control register R/W 0x5 */ +#define F_STAT 0x80102004 /* Flash status register RO 0x45 */ +#define F_PROG_TIME 0x80102008 /* Flash program time register R/W 0 */ +#define F_WAIT 0x80102010 /* Flash read wait state register R/W 0xC004 */ +#define F_CLK_TIME 0x8010201C /* Flash clock divider for 66 kHz generation R/W 0 + **/ +#define F_INTEN_CLR 0x80102FD8 /* Clear interrupt enable bits WO - */ +#define F_INTEN_SET 0x80102FDC /* Set interrupt enable bits WO - */ +#define F_INT_STAT 0x80102FE0 /* Interrupt status bits RO 0 */ +#define F_INTEN 0x80102FE4 /* Interrupt enable bits RO 0 */ +#define F_INT_CLR 0x80102FE8 /* Clear interrupt status bits WO */ +#define F_INT_SET 0x80102FEC /* Set interrupt status bits WO - */ +#define FLASH_PD 0x80005030 /* Allows turning off the Flash memory for power + *savings. R/W 1*/ +#define FLASH_INIT 0x80005034 /* Monitors Flash readiness, such as recovery from + *Power Down mode. R/W -*/ /* F_CTRL bits */ -#define FC_CS 0x0001 -#define FC_FUNC 0x0002 -#define FC_WEN 0x0004 -#define FC_RD_LATCH 0x0020 -#define FC_PROTECT 0x0080 -#define FC_SET_DATA 0x0400 -#define FC_RSSL 0x0800 -#define FC_PROG_REQ 0x1000 -#define FC_CLR_BUF 0x4000 -#define FC_LOAD_REQ 0x8000 +#define FC_CS 0x0001 +#define FC_FUNC 0x0002 +#define FC_WEN 0x0004 +#define FC_RD_LATCH 0x0020 +#define FC_PROTECT 0x0080 +#define FC_SET_DATA 0x0400 +#define FC_RSSL 0x0800 +#define FC_PROG_REQ 0x1000 +#define FC_CLR_BUF 0x4000 +#define FC_LOAD_REQ 0x8000 /* F_STAT bits */ -#define FS_DONE 0x0001 -#define FS_PROGGNT 0x0002 -#define FS_RDY 0x0004 -#define FS_ERR 0x0020 +#define FS_DONE 0x0001 +#define FS_PROGGNT 0x0002 +#define FS_RDY 0x0004 +#define FS_ERR 0x0020 /* F_PROG_TIME */ -#define FPT_TIME_MASK 0x7FFF +#define FPT_TIME_MASK 0x7FFF -#define FPT_ENABLE 0x8000 +#define FPT_ENABLE 0x8000 /* F_WAIT */ -#define FW_WAIT_STATES_MASK 0x00FF -#define FW_SET_MASK 0xC000 +#define FW_WAIT_STATES_MASK 0x00FF +#define FW_SET_MASK 0xC000 /* F_CLK_TIME */ #define FCT_CLK_DIV_MASK 0x0FFF -struct lpc288x_flash_bank -{ +struct lpc288x_flash_bank { uint32_t working_area; uint32_t working_area_size; /* chip id register */ uint32_t cidr; - const char * target_name; + const char *target_name; uint32_t cclk; uint32_t sector_size_break; @@ -106,15 +107,13 @@ static uint32_t lpc288x_wait_status_busy(struct flash_bank *bank, int timeout) { uint32_t status; struct target *target = bank->target; - do - { + do { alive_sleep(1); timeout--; target_read_u32(target, F_STAT, &status); } while (((status & FS_DONE) == 0) && timeout); - if (timeout == 0) - { + if (timeout == 0) { LOG_DEBUG("Timedout!"); return ERROR_FLASH_OPERATION_FAILED; } @@ -132,14 +131,14 @@ static int lpc288x_read_part_info(struct flash_bank *bank) uint32_t offset; if (lpc288x_info->cidr == 0x0102100A) - return ERROR_OK; /* already probed, multiple probes may cause memory leak, not allowed */ + return ERROR_OK;/* already probed, multiple probes may cause memory leak, not + *allowed */ /* Read and parse chip identification register */ target_read_u32(target, DBGU_CIDR, &cidr); - if (cidr != 0x0102100A) - { - LOG_WARNING("Cannot identify target as an LPC288X (%08" PRIx32 ")",cidr); + if (cidr != 0x0102100A) { + LOG_WARNING("Cannot identify target as an LPC288X (%08" PRIx32 ")", cidr); return ERROR_FLASH_OPERATION_FAILED; } @@ -152,16 +151,14 @@ static int lpc288x_read_part_info(struct flash_bank *bank) bank->num_sectors = 23; bank->sectors = malloc(sizeof(struct flash_sector) * 23); - for (i = 0; i < 15; i++) - { + for (i = 0; i < 15; i++) { bank->sectors[i].offset = offset; bank->sectors[i].size = 64 * 1024; offset += bank->sectors[i].size; bank->sectors[i].is_erased = -1; bank->sectors[i].is_protected = 1; } - for (i = 15; i < 23; i++) - { + for (i = 15; i < 23; i++) { bank->sectors[i].offset = offset; bank->sectors[i].size = 8 * 1024; offset += bank->sectors[i].size; @@ -183,9 +180,7 @@ FLASH_BANK_COMMAND_HANDLER(lpc288x_flash_bank_command) struct lpc288x_flash_bank *lpc288x_info; if (CMD_ARGC < 6) - { return ERROR_COMMAND_SYNTAX_ERROR; - } lpc288x_info = malloc(sizeof(struct lpc288x_flash_bank)); bank->driver_priv = lpc288x_info; @@ -220,25 +215,18 @@ static void lpc288x_set_flash_clk(struct flash_bank *bank) static void lpc288x_load_timer(int erase, struct target *target) { if (erase == LOAD_TIMER_ERASE) - { target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 9500); - } else - { target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 75); - } } static uint32_t lpc288x_system_ready(struct flash_bank *bank) { struct lpc288x_flash_bank *lpc288x_info = bank->driver_priv; if (lpc288x_info->cidr == 0) - { return ERROR_FLASH_BANK_NOT_PROBED; - } - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -248,8 +236,7 @@ static uint32_t lpc288x_system_ready(struct flash_bank *bank) static int lpc288x_erase_check(struct flash_bank *bank) { uint32_t status = lpc288x_system_ready(bank); /* probed? halted? */ - if (status != ERROR_OK) - { + if (status != ERROR_OK) { LOG_INFO("Processor not halted/not probed"); return status; } @@ -263,14 +250,11 @@ static int lpc288x_erase(struct flash_bank *bank, int first, int last) int sector; struct target *target = bank->target; - status = lpc288x_system_ready(bank); /* probed? halted? */ + status = lpc288x_system_ready(bank); /* probed? halted? */ if (status != ERROR_OK) - { return status; - } - if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { + if ((first < 0) || (last < first) || (last >= bank->num_sectors)) { LOG_INFO("Bad sector range"); return ERROR_FLASH_SECTOR_INVALID; } @@ -278,30 +262,25 @@ static int lpc288x_erase(struct flash_bank *bank, int first, int last) /* Configure the flash controller timing */ lpc288x_set_flash_clk(bank); - for (sector = first; sector <= last; sector++) - { + for (sector = first; sector <= last; sector++) { if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) - { return ERROR_FLASH_OPERATION_FAILED; - } - lpc288x_load_timer(LOAD_TIMER_ERASE,target); + lpc288x_load_timer(LOAD_TIMER_ERASE, target); target_write_u32(target, bank->sectors[sector].offset, 0x00); target_write_u32(target, F_CTRL, FC_PROG_REQ | FC_PROTECT | FC_CS); } if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) - { return ERROR_FLASH_OPERATION_FAILED; - } return ERROR_OK; } static int lpc288x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count) { uint8_t page_buffer[FLASH_PAGE_SIZE]; - uint32_t status, source_offset,dest_offset; + uint32_t status, source_offset, dest_offset; struct target *target = bank->target; uint32_t bytes_remaining = count; uint32_t first_sector, last_sector, sector, page; @@ -310,39 +289,34 @@ static int lpc288x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs /* probed? halted? */ status = lpc288x_system_ready(bank); if (status != ERROR_OK) - { return status; - } /* Initialise search indices */ first_sector = last_sector = 0xffffffff; /* validate the write range... */ - for (i = 0; i < bank->num_sectors; i++) - { + for (i = 0; i < bank->num_sectors; i++) { if ((offset >= bank->sectors[i].offset) && - (offset < (bank->sectors[i].offset + bank->sectors[i].size)) && - (first_sector == 0xffffffff)) - { + (offset < (bank->sectors[i].offset + bank->sectors[i].size)) && + (first_sector == 0xffffffff)) { first_sector = i; /* all writes must start on a sector boundary... */ - if (offset % bank->sectors[i].size) - { - LOG_INFO("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32 "", offset, bank->sectors[i].size); + if (offset % bank->sectors[i].size) { + LOG_INFO( + "offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32 "", + offset, + bank->sectors[i].size); return ERROR_FLASH_DST_BREAKS_ALIGNMENT; } } if (((offset + count) > bank->sectors[i].offset) && - ((offset + count) <= (bank->sectors[i].offset + bank->sectors[i].size)) && - (last_sector == 0xffffffff)) - { + ((offset + count) <= (bank->sectors[i].offset + bank->sectors[i].size)) && + (last_sector == 0xffffffff)) last_sector = i; - } } /* Range check... */ - if (first_sector == 0xffffffff || last_sector == 0xffffffff) - { + if (first_sector == 0xffffffff || last_sector == 0xffffffff) { LOG_INFO("Range check failed %" PRIx32 " %" PRIx32 "", offset, count); return ERROR_FLASH_DST_OUT_OF_BANK; } @@ -354,32 +328,23 @@ static int lpc288x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs source_offset = 0; dest_offset = 0; - for (sector = first_sector; sector <= last_sector; sector++) - { - for (page = 0; page < bank->sectors[sector].size / FLASH_PAGE_SIZE; page++) - { - if (bytes_remaining == 0) - { + for (sector = first_sector; sector <= last_sector; sector++) { + for (page = 0; page < bank->sectors[sector].size / FLASH_PAGE_SIZE; page++) { + if (bytes_remaining == 0) { count = 0; memset(page_buffer, 0xFF, FLASH_PAGE_SIZE); - } - else if (bytes_remaining < FLASH_PAGE_SIZE) - { + } else if (bytes_remaining < FLASH_PAGE_SIZE) { count = bytes_remaining; memset(page_buffer, 0xFF, FLASH_PAGE_SIZE); memcpy(page_buffer, &buffer[source_offset], count); - } - else - { + } else { count = FLASH_PAGE_SIZE; memcpy(page_buffer, &buffer[source_offset], count); } /* Wait for flash to become ready */ if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK) - { return ERROR_FLASH_OPERATION_FAILED; - } /* fill flash data latches with 1's */ target_write_u32(target, F_CTRL, FC_CS | FC_SET_DATA | FC_WEN | FC_FUNC); @@ -389,14 +354,14 @@ static int lpc288x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs * it seems not to be a LOT slower.... * bulk_write_memory() is no quicker :(*/ #if 1 - if (target_write_memory(target, offset + dest_offset, 4, 128, page_buffer) != ERROR_OK) - { + if (target_write_memory(target, offset + dest_offset, 4, 128, + page_buffer) != ERROR_OK) { LOG_ERROR("Write failed s %" PRIx32 " p %" PRIx32 "", sector, page); return ERROR_FLASH_OPERATION_FAILED; } #else - if (target_write_buffer(target, offset + dest_offset, FLASH_PAGE_SIZE, page_buffer) != ERROR_OK) - { + if (target_write_buffer(target, offset + dest_offset, FLASH_PAGE_SIZE, + page_buffer) != ERROR_OK) { LOG_INFO("Write to flash buffer failed"); return ERROR_FLASH_OPERATION_FAILED; } @@ -407,7 +372,8 @@ static int lpc288x_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offs lpc288x_load_timer(LOAD_TIMER_WRITE, target); - target_write_u32(target, F_CTRL, FC_PROG_REQ | FC_PROTECT | FC_FUNC | FC_CS); + target_write_u32(target, F_CTRL, FC_PROG_REQ | FC_PROTECT | FC_FUNC | + FC_CS); } } @@ -421,12 +387,9 @@ static int lpc288x_probe(struct flash_bank *bank) int retval; if (lpc288x_info->cidr != 0) - { - return ERROR_OK; /* already probed */ - } + return ERROR_OK;/* already probed */ - if (bank->target->state != TARGET_HALTED) - { + if (bank->target->state != TARGET_HALTED) { LOG_ERROR("Target not halted"); return ERROR_TARGET_NOT_HALTED; } @@ -452,32 +415,25 @@ static int lpc288x_protect(struct flash_bank *bank, int set, int first, int last /* probed? halted? */ status = lpc288x_system_ready(bank); if (status != ERROR_OK) - { return status; - } if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { return ERROR_FLASH_SECTOR_INVALID; - } /* Configure the flash controller timing */ lpc288x_set_flash_clk(bank); - for (lockregion = first; lockregion <= last; lockregion++) - { - if (set) - { + for (lockregion = first; lockregion <= last; lockregion++) { + if (set) { /* write an odd value to base addy to protect... */ value = 0x01; - } - else - { + } else { /* write an even value to base addy to unprotect... */ value = 0x00; } target_write_u32(target, bank->sectors[lockregion].offset, value); - target_write_u32(target, F_CTRL, FC_LOAD_REQ | FC_PROTECT | FC_WEN | FC_FUNC | FC_CS); + target_write_u32(target, F_CTRL, FC_LOAD_REQ | FC_PROTECT | FC_WEN | FC_FUNC | + FC_CS); } return ERROR_OK; |