aboutsummaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
authorntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2009-08-18 14:41:58 +0000
committerntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2009-08-18 14:41:58 +0000
commita634b5d52e9a818f7dea91958df7d8a0cd1c1d04 (patch)
tree4eec5fa23f7dbb8346e5483f99ce7e0376305352 /README
parentbb5086b83e098ea9839c4d44b486dacdd11da8d3 (diff)
downloadriscv-openocd-a634b5d52e9a818f7dea91958df7d8a0cd1c1d04.zip
riscv-openocd-a634b5d52e9a818f7dea91958df7d8a0cd1c1d04.tar.gz
riscv-openocd-a634b5d52e9a818f7dea91958df7d8a0cd1c1d04.tar.bz2
Jonas Horberg [jhorberg@sauer-danfoss.com]
https://lists.berlios.de/pipermail/openocd-development/2009-August/009939.html 1. It can only be built with the FTD2XX driver. libftdi supports FT2232H/FT4232H since version 0.16 2. A speed value of 0 is used as a RTCK request indicator. This clashes with the valid clock division value 0 that provide the highest fixed clock frequency. 3. The ft2232_speed_div function return the maximum selectable frequency (30MHz) when RTCK is activated. It should return 0. 4. The ft2232_khz function return ERROR_OK when RTCK is requested even for devices lacking RTCK support. It should return ERROR_FAIL so the upper driver layers can detect this and try to fallback to a fixed frequency. 5. FT2232H/FT4232H have a backward compatibility function that divide the clock by 5 to get the same frequency range as FT2232D. There is no code that disable this functionality. I can not find anything about if this is enabled or disabled by default. I think it is safest to actively disable it. git-svn-id: svn://svn.berlios.de/openocd/trunk@2591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'README')
-rw-r--r--README23
1 files changed, 12 insertions, 11 deletions
diff --git a/README b/README
index e3b49a9..d95d689 100644
--- a/README
+++ b/README
@@ -125,7 +125,7 @@ Building OpenOCD
The INSTALL file contains generic instructions for running 'configure'
and compiling the OpenOCD source code. That file is provided by default
for all GNU automake packages. If you are not familiar with the GNU
-autotools, then you should read those instructions first.
+autotools, then you should read those instructions first.
The remainder of this document tries to provide some instructions for
those looking for a quick-install.
@@ -163,7 +163,7 @@ To build OpenOCD (on both Linux and Cygwin), use the following sequence
of commands:
./configure [with some options listed in the next section]
- make
+ make
make install
The 'configure' step generates the Makefiles required to build OpenOCD,
@@ -180,7 +180,7 @@ the 'configure' script. For example, you can configure OpenOCD to
cross-compile on a x86 Linux host to run on Windows (MinGW32), you could
use the following configuration options:
- ./configure --build=i686-pc-linux-gnu --host=i586-mingw32msvc ...
+ ./configure --build=i686-pc-linux-gnu --host=i586-mingw32msvc ...
Likewise, the following options allow OpenOCD to be cross-compiled for
an ARM target on the same x86 host:
@@ -215,9 +215,10 @@ options may be available there:
FTD2XX
--enable-ft2232_ftd2xx Enable building support for FT2232 based devices
using the FTD2XX driver from ftdichip.com
- --enable-ftd2xx-highspeed
+ --enable-ft2232-highspeed
Enable building support for FT2232H and
- FT4232H-based devices (requires >=libftd2xx-0.4.16)
+ FT4232H-based devices (requires >=libftd2xx-0.4.16
+ or >=libftdi-0.16)
--enable-gw16012 Enable building support for the Gateworks GW16012
JTAG Programmer
@@ -301,12 +302,12 @@ have to use both the --enable-parport AND the --enable-parport-giveio
option if you want to use giveio instead of ioperm parallel port access
method.
-FT2232C Based USB Dongles
+FT2232C Based USB Dongles
-------------------------
There are 2 methods of using the FTD2232, either (1) using the
FTDICHIP.COM closed source driver, or (2) the open (and free) driver
-libftdi.
+libftdi.
Using LIBFTDI
-------------
@@ -320,7 +321,7 @@ installed. To use the newer FT2232H chips, supporting RTCK and USB high
speed (480 Mbps), you need libftdi version 0.16 or newer. Many Linux
distributions provide suitable packages for these libraries.
-For Windows, libftdi is supported with versions 0.14 and later.
+For Windows, libftdi is supported with versions 0.14 and later.
With these prerequisites met, configure the libftdi solution like this:
@@ -340,7 +341,7 @@ copies for personal use.
The FTDICHIP drivers come as either a (win32) ZIP file, or a (Linux)
TAR.GZ file. You must unpack them ``some where'' convient. As of this
writing FTDICHIP does not supply means to install these files "in an
-appropriate place."
+appropriate place."
If your distribution does not package these, there are several
'./configure' options to solve this problem:
@@ -361,7 +362,7 @@ Windows or Linux FTD2xx drivers from the following location:
Remember, this library is binary-only, while OpenOCD is licenced
according to GNU GPLv2 without any exceptions. That means that
_distributing_ copies of OpenOCD built with the FTDI code would violate
-the OpenOCD licensing terms.
+the OpenOCD licensing terms.
Linux Notes
***********
@@ -404,7 +405,7 @@ Tips For Building From The Subversion Repository
************************************************
Building OpenOCD from a repository requires a recent version of the GNU
-autotools (autoconf >= 2.59 and automake >= 1.9).
+autotools (autoconf >= 2.59 and automake >= 1.9).
1) Run './bootstrap' to create the 'configure' script and prepare
the build process for your host system.