| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The storage space for virtio-blk request header being shared
with the host was from the stack as the request structure was
a local function variable.
A bug in the VMM can corrupt the stack space, and such issues
can be very hard to debug.
Note: This is only an issue with a normal guest VM (non-CCA).
A CCA guest VM would perform bounce buffering for sharing the
data and therefore not have this issue.
Instead of using the stack for sharing the data with the host,
memory can be allocated from the heap pool. However, pool
allocations are not any safer in terms of pages being shared
between different allocations, and so mapping a pool allocation
for DMA may expose it to potential corruption by the VMM in
exactly the same way. The only difference is the potential
impact on program behaviour, which is much higher with the
stack.
Additionally, for guest-side corruption heap allocations can
take advantage by turning on heap guard to help find the bug.
Therefore, minor improvement can be achieved by allocating
memory for the virtio-blk request header from the heap for
sharing with the host.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
OvmfPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the OvmfPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Andrew Fish <afish@apple.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1373
Replace BSD 2-Clause License with BSD+Patent License. This change is
based on the following emails:
https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html
https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html
RFCs with detailed process for the license change:
V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html
V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html
V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Initialize local variable to suppress warning C4701/C4703:
potentially uninitialized local variable/pointer variable.
1.In VirtualMemory.c:
Read of "PageMapLevel4Entry" in SetMemoryEncDe() is only
reached when "PageMapLevel4Entry" is got correctly.
2.In VirtioBlk.c:
Reads (dereferences) of "BufferMapping" and "BufferDeviceAddress"
in SynchronousRequest() are only reached if "BufferSize > 0" *and*
we map the data buffer successfully.
3.In VirtioScsi.c:
Reads (dereferences) of "InDataMapping" and "InDataDeviceAddress",
in VirtioScsiPassThru() are only reached if
"Packet->InTransferLength > 0" on input, *and* we map the
input buffer successfully. The similar reason for "OutDataMapping"
and "OutDataDeviceAddress".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Among other things, the header file defines macros and types that are
private to the driver and are used by the sole C file of the driver.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
In one of the following patches, we'll change OvmfPkg/IoMmuDxe so that it
unmaps all existent bus master operations (CommonBuffer, Read, Write) at
ExitBootServices(), strictly after the individual device drivers abort
pending DMA on the devices they manage, in their own ExitBootServices()
notification functions.
In preparation, remove the explicit
VIRTIO_DEVICE_PROTOCOL.UnmapSharedBuffer() call from VirtioBlkExitBoot(),
originally added in commit 19165130470f ("OvmfPkg/VirtioBlkDxe: map VRING
using VirtioRingMap()", 2017-08-27).
Add a DEBUG message so we can observe the ordering between
VirtioBlkExitBoot() and the upcoming cleanup of mappings in
OvmfPkg/IoMmuDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
|
|
when "RequestIsWrite" is FALSE -- i.e., the CPU wants data from
the device, we map "Buffer" for VirtioOperationBusMasterWrite. In
this case, checking the return status of
Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, BufferMapping);
is must. If the unmapping fails, then "Buffer" will not contain the
actual data from the device, and we must fail the request with
EFI_DEVICE_ERROR.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: fix typos in subject]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
VirtioBlkDxe driver has been updated to use IOMMU-like member functions
from VIRTIO_DEVICE_PROTOCOL to translate the system physical address to
device address. We do not need to do anything special when
VIRTIO_F_IOMMU_PLATFORM bit is present hence treat it in parallel with
VIRTIO_F_VERSION_1.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
When device is behind the IOMMU, driver is require to pass the device
address of virtio request, response and any memory referenced by those
request/response to the bus master.
The patch uses IOMMU-like member functions from VIRTIO_DEVICE_PROTOCOL to
map request and response buffers system physical address to the device
address.
- If the buffer need to be accessed by both the processor and a bus
master then map with BusMasterCommonBuffer.
- If the buffer need to be accessed for a write operation by a bus master
then map with BusMasterWrite.
- If the buffer need to be accessed for a read operation by a bus master
then map with BusMasterRead.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
When device is behind the IOMMU then driver need to pass the device
address when programing the bus master. The patch uses VirtioRingMap() to
map the VRING system physical address to device address.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
For the case when an IOMMU is used for translating system physical
addresses to DMA bus master addresses, the transport-independent
virtio device drivers will be required to map their VRING areas to
bus addresses with VIRTIO_DEVICE_PROTOCOL.MapSharedBuffer() calls.
- MMIO and legacy virtio transport do not support IOMMU to translate the
addresses hence RingBaseShift will always be set to zero.
- modern virtio transport supports IOMMU to translate the address, in
next patch we will update the Virtio10Dxe to use RingBaseShift offset.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: remove commit msg paragraph with VirtioLib reference]
[lersek@redhat.com: fix typo in VIRTIO_SET_QUEUE_ADDRESS comment block]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
Passing the VirtIo protocol instance will allow the vring to use
VIRTIO_DEVICE_PROTOCOL.AllocateSharedPages () to allocate vring buffer.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
|
|
- accessibla to accessible
- exeuction to execution
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Relative to virtio-0.9.5, virtio-1.0 reverses the order of queue discovery
and feature negotiation. In virtio-1.0, feature negotiation has to
complete first, and the device can also reject a self-inconsistent feature
request through the new VSTAT_FEATURES_OK status bit. (For example if the
driver requests a higher level feature but clears a prerequisite feature.)
Furthermore, we retain the VIRTIO_F_VERSION_1 feature bit if the
VIRTIO_DEVICE_PROTOCOL provider has high enough revision.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
VirtioBlkDxe only recognizes virtio-block feature bits that the device
offers non-negotiably. Nonetheless, in preparation for the following
patches, don't try to clear them even for simplicity.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
In virtio-1.0, it is not enough to pass the base address of the virtio
queue to the hypervisor (as a frame number); instead it will want the
addresses of the descriptor table, the available ring, and the used ring
separately. Pass the VRING object to the SetQueueAddress() member
function; this will enable a virtio-1.0 implementation. Convert the
current producers and consumers to this prototype.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
The virtio-1.0 spec widens the Features bitmap to 64 bits. Modify the
declarations of the GetDeviceFeatures() and SetGuestFeatures() protocol
member functions accordingly.
Normally, a protocol cannot be changed in incompatible ways if the GUID
stays the same; however, we've always been extremely clear that
VIRTIO_DEVICE_PROTOCOL is internal to edk2. See for example the top of
"OvmfPkg/Include/Protocol/VirtioDevice.h".
In this patch, all producers and consumers of the GetDeviceFeatures() and
SetGuestFeatures() protocol members are updated.
The drivers that currently produce these members are "legacy" drivers (in
virtio-1.0 terminology), and they cannot (and will not) handle feature
bits above BIT31. Therefore their conversion is only for compatibility
with the modified protocol interface. The consumers will be responsible
for checking the VIRTIO_DEVICE_PROTOCOL.Revision field, and for not
passing feature bits that these backends cannot handle.
The VirtioMmioGetDeviceFeatures() implementation stores the result of an
MmioRead32() call with normal assignment, so it needs no change beyond
adapting its prototype.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
VirtioLib provides an API for simple, synchronous (request/response-style)
virtio communication. The guest driver builds one descriptor chain, link
for link, with VirtioPrepare() and VirtioAppendDesc(), then submits the
chain, and awaits the processing, with VirtioFlush().
The descriptor chain is always built at the beginning of the descriptor
area, with the head descriptor having descriptor index 0.
In order to submit the descriptor chain to the host, the guest always
pushes a new "available element" to the Available Ring, in genuine
queue-like fashion, with the new element referencing the head descriptor
(which always has index 0, see above).
In turn, after processing, the host always pushes a new "used element" to
the Used Ring, in genuine queue-like fashion, with the new element
referencing the head descriptor of the chain that was just processed. The
same element also reports the number of bytes that the host wrote,
consecutively across the host-writeable buffers that were linked by the
descriptors.
(See "OvmfPkg/VirtioNetDxe/TechNotes.txt" for a diagram about the
descriptor area and the rings.)
Because at most one descriptor chain can be in flight with VirtioLib at
any time,
- the Available Ring and the Used Ring proceed in lock-step,
- and the head descriptor that the new "available" and "used" elements can
ever reference has index 0.
Based on the above, we can modify VirtioFlush() to return the number of
bytes written by the host across the descriptor chain. The virtio-block
and virtio-scsi drivers don't care (they have other ways to parse the data
produced by the host), while the virtio-net driver doesn't use
VirtioFlush() at all (it employs VirtioLib only to set up its rings).
However, the virtio entropy device, to be covered in the upcoming
patches, reports the amount of randomness produced by the host only
through this quantity.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
(1) VirtioLib allocates the virtio ring in EfiBootServicesData memory.
(This is intentional.) Code that executes after ExitBootServices() is
permitted to reuse such memory.
(2) The hypervisor is allowed to look at, and act upon, a live virtio ring
at any time, even without explicit virtio kicks from the guest.
Should boot loader code or kernel code, running between ExitBootServices()
and the kernel's own virtio drivers resetting the device, overwrite the
pages that used to contain the virtio ring before ExitBootServices(), QEMU
could theoretically interpret that unrelated data as garbage ring
contents, and abort the guest.
Although we have seen no such reports, better be prudent and reset the
device in an ExitBootServices() event handler. Among other things, this
causes QEMU to forget about the device's virtio ring.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18624 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16171 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15005 6f19259b-4bc3-4df7-8a09-765794883524
|
|
UEFI spec virtio spec
======================================= =================================
LowestAlignedLba EFI_LBA (UINT64) alignment_offset u8
+-------------------------------------- +--------------------------------
| first LBA that is aligned to a | offset of first aligned
| physical block boundary (SCSI | logical block
| definition)
LogicalBlocksPerPhysicalBlock UINT32 physical_block_exp u8
+-------------------------------------- +--------------------------------
| number of logical blocks per | # of logical blocks per
| physical block [...] does not contain | physical block (log2)
| an exponential value
OptimalTransferLengthGranularity UINT32 opt_io_size le32
+-------------------------------------- +--------------------------------
| optimal transfer length granularity | optimal (suggested maximum) I/O
| as a number of logical blocks [...] A | size in blocks
| value of 0 means there is no reported
| optimal transfer length granularity
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15004 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Lines should be no longer than 79 characters.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15003 6f19259b-4bc3-4df7-8a09-765794883524
|
|
The recent patch
OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL
was fixed up at commit time, in order to silence warnings issued by the
Visual Studio compiler. Differences between the posted and committed
patch:
> diff --git a/OvmfPkg/VirtioBlkDxe/VirtioBlk.c b/OvmfPkg/VirtioBlkDxe/VirtioBlk.c
> -index 17b9f71..96a0d9f 100644
> +index 17b9f71..f09b0d1 100644
> --- a/OvmfPkg/VirtioBlkDxe/VirtioBlk.c
> +++ b/OvmfPkg/VirtioBlkDxe/VirtioBlk.c
> @@ -23,7 +23,6 @@
> @@ -994,7 +998,7 @@
> + // step 4c -- Report GPFN (guest-physical frame number) of queue.
> + //
> + Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo,
> -+ (UINTN) Dev->Ring.Base >> EFI_PAGE_SHIFT);
> ++ (UINT32)(UINTN) Dev->Ring.Base >> EFI_PAGE_SHIFT);
> + if (EFI_ERROR (Status)) {
> + goto ReleaseQueue;
> + }
> @@ -1495,7 +1499,7 @@
> goto Exit;
> }
> diff --git a/OvmfPkg/VirtioNetDxe/SnpInitialize.c b/OvmfPkg/VirtioNetDxe/SnpInitialize.c
> -index 6cee014..8dcf9da 100644
> +index 6cee014..4203fbd 100644
> --- a/OvmfPkg/VirtioNetDxe/SnpInitialize.c
> +++ b/OvmfPkg/VirtioNetDxe/SnpInitialize.c
> @@ -57,14 +57,15 @@ VirtioNetInitRing (
> @@ -1539,7 +1543,7 @@
> - Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrQueueAddress,
> - (UINTN) Ring->Base >> EFI_PAGE_SHIFT);
> + Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo,
> -+ (UINTN) Ring->Base >> EFI_PAGE_SHIFT);
> ++ (UINT32)(UINTN) Ring->Base >> EFI_PAGE_SHIFT);
> if (EFI_ERROR (Status)) {
> - VirtioRingUninit (Ring);
> + goto ReleaseQueue;
> @@ -1721,7 +1725,7 @@
> Exit:
> gBS->RestoreTPL (OldTpl);
> diff --git a/OvmfPkg/VirtioScsiDxe/VirtioScsi.c b/OvmfPkg/VirtioScsiDxe/VirtioScsi.c
> -index b836fb3..bcec676 100644
> +index b836fb3..2223c9c 100644
> --- a/OvmfPkg/VirtioScsiDxe/VirtioScsi.c
> +++ b/OvmfPkg/VirtioScsiDxe/VirtioScsi.c
> @@ -38,7 +38,6 @@
> @@ -1908,7 +1912,7 @@
> + // step 4c -- Report GPFN (guest-physical frame number) of queue.
> + //
> + Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo,
> -+ (UINTN) Dev->Ring.Base >> EFI_PAGE_SHIFT);
> ++ (UINT32)(UINTN) Dev->Ring.Base >> EFI_PAGE_SHIFT);
> if (EFI_ERROR (Status)) {
> goto ReleaseQueue;
> }
These casts are incorrect -- they throw away address bits >=32 before
shifting, which can break the drivers in guests with more than 4GB RAM.
The bug is clearly an artifact of the edk2 coding style, which requires
cast expressions to be written as
(type) expression
rather than the usual
(type)expression
The latter correctly reflects that casts have one of the strongest
bindings in C. The former actively obscures that fact. Cf.
(type) expr1 >> expr2
vs.
(type)expr1 >> expr2
Make sure we shift before we truncate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14970 6f19259b-4bc3-4df7-8a09-765794883524
|
|
These functions did not provide much more than the new protocol functions
VIRTIO_DEVICE_PROTOCOL.ReadDevice() / VIRTIO_DEVICE_PROTOCOL.WriteDevice().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14968 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by
the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer.
It means these drivers can be used on PCI and MMIO transport layer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
v5:
- VirtioFlush(): update comment block in VirtioLib.[hc]; error code is
propagated from VirtIo->SetQueueNotify().
- VirtioBlkInit(): jump to Failed label if SetPageSize() fails
- VirtioBlkInit(): fixup comment, and add error handling, near
SetQueueNum() call
- VirtioBlkDriverBindingStart(): remove redundant (always false) check for
a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE;
VirtioBlkDriverBindingSupported() handles it already
- VirtioNetGetFeatures(): update stale comment block
- VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded
loop)
- VirtioNetDriverBindingStart(): remove redundant (always false) check for
a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD;
VirtioNetDriverBindingSupported() handles it already
- VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper
MMIO operation
- VirtioNetInitialize(): fix destination error label for when
SetPageSize() fails
- VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ()
- VirtioScsiInit(): fix destination error label for when SetPageSize()
fails
- VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO
operation
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524
|
|
drivers
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14742 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13866 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13847 6f19259b-4bc3-4df7-8a09-765794883524
|
|
OvmfPkg/VirtioBlkDxe/VirtioBlk.c:667: undefined reference to `__umoddi3'
OvmfPkg/VirtioBlkDxe/VirtioBlk.c:750: undefined reference to `__udivdi3'
These operations would come from libgcc in the IA32 build, but OVMF does not
link against libgcc.
Regression-tested the X64 build with Fedora 18 Alpha XFCE and Windows 8
Consumer Preview guests.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13846 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mike Lee <leemiketw@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13845 6f19259b-4bc3-4df7-8a09-765794883524
|
|
new VirtioLib functions:
- VirtioPrepare(): prepare for appending descriptors
- VirtioFlush(): submit descriptor chain and await host answer
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13844 6f19259b-4bc3-4df7-8a09-765794883524
|
|
AppendDesc() should have a prefix implying its containing library,
VirtioLib. Update its sole client VirtioBlkDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13843 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Introduce a new library called VirtioLib, for now only collecting the
following reusable functions with as little changes as possible:
- VirtioWrite()
- VirtioRead()
- VirtioRingInit()
- VirtioRingUninit()
- AppendDesc()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13842 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Separate virtio-blk related macro and type definitions from generic virtio
related ones. Adapt the virtio-blk driver since it needs the latter too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13841 6f19259b-4bc3-4df7-8a09-765794883524
|
|
since they are in fact virtio-blk specific.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13840 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13839 6f19259b-4bc3-4df7-8a09-765794883524
|
|
This commit consists of:
- a verbatim move ("similarity index 100%" in git parlance),
- an updated #include directive in VirtioBlkDxe/VirtioBlk.h,
- and an OvmfPkg.dec package entry in VirtioBlkDxe/VirtioBlk.inf, so that
the new include directory is searched.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13836 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13835 6f19259b-4bc3-4df7-8a09-765794883524
|
|
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13798 6f19259b-4bc3-4df7-8a09-765794883524
|
