OvmfPkg: Make the VirtIo devices use the new VIRTIO_DEVICE_PROTOCOL

This change replaces the accesses to the PCI bus from the Block, Scsi and Net drivers by
the use of the new VIRTIO_DEVICE_PROTOCOL protocol that abstracts the transport layer.
It means these drivers can be used on PCI and MMIO transport layer.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>

v5:
- VirtioFlush(): update comment block in VirtioLib.[hc]; error code is
  propagated from VirtIo->SetQueueNotify().
- VirtioBlkInit(): jump to Failed label if SetPageSize() fails
- VirtioBlkInit(): fixup comment, and add error handling, near
  SetQueueNum() call
- VirtioBlkDriverBindingStart(): remove redundant (always false) check for
  a subsystem device ID different from VIRTIO_SUBSYSTEM_BLOCK_DEVICE;
  VirtioBlkDriverBindingSupported() handles it already
- VirtioNetGetFeatures(): update stale comment block
- VirtioNetGetFeatures(): retrieve MAC address byte for byte (open-coded
  loop)
- VirtioNetDriverBindingStart(): remove redundant (always false) check for
  a subsystem device ID different from VIRTIO_SUBSYSTEM_NETWORK_CARD;
  VirtioNetDriverBindingSupported() handles it already
- VirtioNetInitRing(): call SetQueueNum() and SetQueueAlign() for proper
  MMIO operation
- VirtioNetInitialize(): fix destination error label for when
  SetPageSize() fails
- VirtioScsi.c: fix comment block of VIRTIO_CFG_WRITE()/VIRTIO_CFG_READ()
- VirtioScsiInit(): fix destination error label for when SetPageSize()
  fails
- VirtioScsiInit(): call SetQueueNum() and SetQueueAlign() for proper MMIO
  operation

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14966 6f19259b-4bc3-4df7-8a09-765794883524

3 files changed, 87 insertions, 129 deletions

diff --git a/OvmfPkg/VirtioBlkDxe/VirtioBlk.c b/OvmfPkg/VirtioBlkDxe/VirtioBlk.c
index 17b9f71..f09b0d1 100644
--- a/OvmfPkg/VirtioBlkDxe/VirtioBlk.c
+++ b/OvmfPkg/VirtioBlkDxe/VirtioBlk.c
@@ -23,7 +23,6 @@
 

 **/

 

-#include <IndustryStandard/Pci.h>

 #include <IndustryStandard/VirtioBlk.h>

 #include <Library/BaseMemoryLib.h>

 #include <Library/DebugLib.h>

@@ -37,14 +36,14 @@
 /**

 

   Convenience macros to read and write region 0 IO space elements of the

-  virtio-blk PCI device, for configuration purposes.

+  virtio-blk device, for configuration purposes.

 

   The following macros make it possible to specify only the "core parameters"

   for such accesses and to derive the rest. By the time VIRTIO_CFG_WRITE()

   returns, the transaction will have been completed.

 

-  @param[in] Dev       Pointer to the VBLK_DEV structure whose PCI IO space

-                       we're accessing. Dev->PciIo must be valid.

+  @param[in] Dev       Pointer to the VBLK_DEV structure whose VirtIo space

+                       we're accessing. Dev->VirtIo must be valid.

 

   @param[in] Field     A field name from VBLK_HDR, identifying the virtio-blk

                        configuration item to access.

@@ -57,19 +56,19 @@
                        one of UINT8, UINT16, UINT32, UINT64.

 

 

-  @return  Status code returned by VirtioWrite() / VirtioRead().

+  @return  Status code returned by VirtioWriteDevice() / VirtioReadDevice().

 

 **/

 

-#define VIRTIO_CFG_WRITE(Dev, Field, Value)  (VirtioWrite (             \

-                                                (Dev)->PciIo,           \

+#define VIRTIO_CFG_WRITE(Dev, Field, Value)  (VirtioWriteDevice (       \

+                                                (Dev)->VirtIo,          \

                                                 OFFSET_OF_VBLK (Field), \

                                                 SIZE_OF_VBLK (Field),   \

                                                 (Value)                 \

                                                 ))

 

-#define VIRTIO_CFG_READ(Dev, Field, Pointer) (VirtioRead (              \

-                                                (Dev)->PciIo,           \

+#define VIRTIO_CFG_READ(Dev, Field, Pointer) (VirtioReadDevice (        \

+                                                (Dev)->VirtIo,          \

                                                 OFFSET_OF_VBLK (Field), \

                                                 SIZE_OF_VBLK (Field),   \

                                                 sizeof *(Pointer),      \

@@ -229,7 +228,7 @@ VerifyReadWriteRequest (
 

   @retval EFI_SUCCESS          Transfer complete.

 

-  @retval EFI_DEVICE_ERROR     Failed to notify host side via PCI write, or

+  @retval EFI_DEVICE_ERROR     Failed to notify host side via VirtIo write, or

                                unable to parse host response, or host response

                                is not VIRTIO_BLK_S_OK.

 

@@ -324,7 +323,7 @@ SynchronousRequest (
   //

   // virtio-blk's only virtqueue is #0, called "requestq" (see Appendix D).

   //

-  if (VirtioFlush (Dev->PciIo, 0, &Dev->Ring, &Indices) == EFI_SUCCESS &&

+  if (VirtioFlush (Dev->VirtIo, 0, &Dev->Ring, &Indices) == EFI_SUCCESS &&

       HostStatus == VIRTIO_BLK_S_OK) {

     return EFI_SUCCESS;

   }

@@ -500,11 +499,6 @@ VirtioBlkFlushBlocks (
       underlying device

     - 9 Driver Binding Protocol -- for exporting ourselves

 

-  Specs relevant in the specific sense:

-  - UEFI Spec 2.3.1 + Errata C, 13.4 EFI PCI I/O Protocol

-  - Driver Writer's Guide for UEFI 2.3.1 v1.01, 18 PCI Driver Design

-    Guidelines, 18.3 PCI drivers.

-

   @param[in]  This                The EFI_DRIVER_BINDING_PROTOCOL object

                                   incorporating this driver (independently of

                                   any device).

@@ -516,11 +510,11 @@ VirtioBlkFlushBlocks (
 

   @retval EFI_SUCCESS      The driver supports the device being probed.

 

-  @retval EFI_UNSUPPORTED  Based on virtio-blk PCI discovery, we do not support

+  @retval EFI_UNSUPPORTED  Based on virtio-blk discovery, we do not support

                            the device.

 

   @return                  Error codes from the OpenProtocol() boot service or

-                           the PciIo protocol.

+                           the VirtIo protocol.

 

 **/

 

@@ -533,56 +527,36 @@ VirtioBlkDriverBindingSupported (
   )

 {

   EFI_STATUS          Status;

-  EFI_PCI_IO_PROTOCOL *PciIo;

-  PCI_TYPE00          Pci;

+  VIRTIO_DEVICE_PROTOCOL *VirtIo;

 

   //

-  // Attempt to open the device with the PciIo set of interfaces. On success,

-  // the protocol is "instantiated" for the PCI device. Covers duplicate open

+  // Attempt to open the device with the VirtIo set of interfaces. On success,

+  // the protocol is "instantiated" for the VirtIo device. Covers duplicate open

   // attempts (EFI_ALREADY_STARTED).

   //

   Status = gBS->OpenProtocol (

                   DeviceHandle,               // candidate device

-                  &gEfiPciIoProtocolGuid,     // for generic PCI access

-                  (VOID **)&PciIo,            // handle to instantiate

+                  &gVirtioDeviceProtocolGuid, // for generic VirtIo access

+                  (VOID **)&VirtIo,           // handle to instantiate

                   This->DriverBindingHandle,  // requestor driver identity

                   DeviceHandle,               // ControllerHandle, according to

                                               // the UEFI Driver Model

-                  EFI_OPEN_PROTOCOL_BY_DRIVER // get exclusive PciIo access to

+                  EFI_OPEN_PROTOCOL_BY_DRIVER // get exclusive VirtIo access to

                                               // the device; to be released

                   );

   if (EFI_ERROR (Status)) {

     return Status;

   }

 

-  //

-  // Read entire PCI configuration header for more extensive check ahead.

-  //

-  Status = PciIo->Pci.Read (

-                        PciIo,                        // (protocol, device)

-                                                      // handle

-                        EfiPciIoWidthUint32,          // access width & copy

-                                                      // mode

-                        0,                            // Offset

-                        sizeof Pci / sizeof (UINT32), // Count

-                        &Pci                          // target buffer

-                        );

-

-  if (Status == EFI_SUCCESS) {

-    //

-    // virtio-0.9.5, 2.1 PCI Discovery

-    //

-    Status = (Pci.Hdr.VendorId == 0x1AF4 &&

-              Pci.Hdr.DeviceId >= 0x1000 && Pci.Hdr.DeviceId <= 0x103F &&

-              Pci.Hdr.RevisionID == 0x00 &&

-              Pci.Device.SubsystemID == VIRTIO_SUBSYSTEM_BLOCK_DEVICE) ? EFI_SUCCESS : EFI_UNSUPPORTED;

+  if (VirtIo->SubSystemDeviceId != VIRTIO_SUBSYSTEM_BLOCK_DEVICE) {

+    Status = EFI_UNSUPPORTED;

   }

 

   //

-  // We needed PCI IO access only transitorily, to see whether we support the

+  // We needed VirtIo access only transitorily, to see whether we support the

   // device or not.

   //

-  gBS->CloseProtocol (DeviceHandle, &gEfiPciIoProtocolGuid,

+  gBS->CloseProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,

          This->DriverBindingHandle, DeviceHandle);

   return Status;

 }

@@ -594,8 +568,8 @@ VirtioBlkDriverBindingSupported (
   device.

 

   @param[in out] Dev  The driver instance to configure. The caller is

-                      responsible for Dev->PciIo's validity (ie. working IO

-                      access to the underlying virtio-blk PCI device).

+                      responsible for Dev->VirtIo's validity (ie. working IO

+                      access to the underlying virtio-blk device).

 

   @retval EFI_SUCCESS      Setup complete.

 

@@ -626,19 +600,27 @@ VirtioBlkInit (
   // Execute virtio-0.9.5, 2.2.1 Device Initialization Sequence.

   //

   NextDevStat = 0;             // step 1 -- reset device

-  Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, NextDevStat);

+  Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);

   if (EFI_ERROR (Status)) {

     goto Failed;

   }

 

   NextDevStat |= VSTAT_ACK;    // step 2 -- acknowledge device presence

-  Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, NextDevStat);

+  Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);

   if (EFI_ERROR (Status)) {

     goto Failed;

   }

 

   NextDevStat |= VSTAT_DRIVER; // step 3 -- we know how to drive it

-  Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, NextDevStat);

+  Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);

+  if (EFI_ERROR (Status)) {

+    goto Failed;

+  }

+

+  //

+  // Set Page Size - MMIO VirtIo Specific

+  //

+  Status = Dev->VirtIo->SetPageSize (Dev->VirtIo, EFI_PAGE_SIZE);

   if (EFI_ERROR (Status)) {

     goto Failed;

   }

@@ -646,11 +628,12 @@ VirtioBlkInit (
   //

   // step 4a -- retrieve and validate features

   //

-  Status = VIRTIO_CFG_READ (Dev, Generic.VhdrDeviceFeatureBits, &Features);

+  Status = Dev->VirtIo->GetDeviceFeatures (Dev->VirtIo, &Features);

   if (EFI_ERROR (Status)) {

     goto Failed;

   }

-  Status = VIRTIO_CFG_READ (Dev, VhdrCapacity, &NumSectors);

+

+  Status = VIRTIO_CFG_READ (Dev, Capacity, &NumSectors);

   if (EFI_ERROR (Status)) {

     goto Failed;

   }

@@ -660,7 +643,7 @@ VirtioBlkInit (
   }

 

   if (Features & VIRTIO_BLK_F_BLK_SIZE) {

-    Status = VIRTIO_CFG_READ (Dev, VhdrBlkSize, &BlockSize);

+    Status = VIRTIO_CFG_READ (Dev, BlkSize, &BlockSize);

     if (EFI_ERROR (Status)) {

       goto Failed;

     }

@@ -681,11 +664,11 @@ VirtioBlkInit (
   //

   // step 4b -- allocate virtqueue

   //

-  Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrQueueSelect, 0);

+  Status = Dev->VirtIo->SetQueueSel (Dev->VirtIo, 0);

   if (EFI_ERROR (Status)) {

     goto Failed;

   }

-  Status = VIRTIO_CFG_READ (Dev, Generic.VhdrQueueSize, &QueueSize);

+  Status = Dev->VirtIo->GetQueueNumMax (Dev->VirtIo, &QueueSize);

   if (EFI_ERROR (Status)) {

     goto Failed;

   }

@@ -700,22 +683,36 @@ VirtioBlkInit (
   }

 

   //

-  // step 4c -- Report GPFN (guest-physical frame number) of queue. If anything

-  // fails from here on, we must release the ring resources.

+  // Additional steps for MMIO: align the queue appropriately, and set the

+  // size. If anything fails from here on, we must release the ring resources.

+  //

+  Status = Dev->VirtIo->SetQueueNum (Dev->VirtIo, QueueSize);

+  if (EFI_ERROR (Status)) {

+    goto ReleaseQueue;

+  }

+

+  Status = Dev->VirtIo->SetQueueAlign (Dev->VirtIo, EFI_PAGE_SIZE);

+  if (EFI_ERROR (Status)) {

+    goto ReleaseQueue;

+  }

+

+  //

+  // step 4c -- Report GPFN (guest-physical frame number) of queue.

   //

-  Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrQueueAddress,

-             (UINTN) Dev->Ring.Base >> EFI_PAGE_SHIFT);

+  Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo,

+      (UINT32)(UINTN) Dev->Ring.Base >> EFI_PAGE_SHIFT);

   if (EFI_ERROR (Status)) {

     goto ReleaseQueue;

   }

 

+

   //

   // step 5 -- Report understood features. There are no virtio-blk specific

   // features to negotiate in virtio-0.9.5, plus we do not want any of the

   // device-independent (known or unknown) VIRTIO_F_* capabilities (see

   // Appendix B).

   //

-  Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrGuestFeatureBits, 0);

+  Status = Dev->VirtIo->SetGuestFeatures (Dev->VirtIo, 0);

   if (EFI_ERROR (Status)) {

     goto ReleaseQueue;

   }

@@ -724,7 +721,7 @@ VirtioBlkInit (
   // step 6 -- initialization complete

   //

   NextDevStat |= VSTAT_DRIVER_OK;

-  Status = VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, NextDevStat);

+  Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);

   if (EFI_ERROR (Status)) {

     goto ReleaseQueue;

   }

@@ -758,10 +755,10 @@ ReleaseQueue:
 Failed:

   //

   // Notify the host about our failure to setup: virtio-0.9.5, 2.2.2.1 Device

-  // Status. PCI IO access failure here should not mask the original error.

+  // Status. VirtIo access failure here should not mask the original error.

   //

   NextDevStat |= VSTAT_FAILED;

-  VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, NextDevStat);

+  Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);

 

   return Status; // reached only via Failed above

 }

@@ -788,7 +785,7 @@ VirtioBlkUninit (
   // VIRTIO_CFG_WRITE() returns, the host will have learned to stay away from

   // the old comms area.

   //

-  VIRTIO_CFG_WRITE (Dev, Generic.VhdrDeviceStatus, 0);

+  Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, 0);

 

   VirtioRingUninit (&Dev->Ring);

 

@@ -815,13 +812,13 @@ VirtioBlkUninit (
 

 

   @retval EFI_SUCCESS           Driver instance has been created and

-                                initialized  for the virtio-blk PCI device, it

+                                initialized  for the virtio-blk device, it

                                 is now accessibla via EFI_BLOCK_IO_PROTOCOL.

 

   @retval EFI_OUT_OF_RESOURCES  Memory allocation failed.

 

   @return                       Error codes from the OpenProtocol() boot

-                                service, the PciIo protocol, VirtioBlkInit(),

+                                service, the VirtIo protocol, VirtioBlkInit(),

                                 or the InstallProtocolInterface() boot service.

 

 **/

@@ -842,43 +839,19 @@ VirtioBlkDriverBindingStart (
     return EFI_OUT_OF_RESOURCES;

   }

 

-  Status = gBS->OpenProtocol (DeviceHandle, &gEfiPciIoProtocolGuid,

-                  (VOID **)&Dev->PciIo, This->DriverBindingHandle,

+  Status = gBS->OpenProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,

+                  (VOID **)&Dev->VirtIo, This->DriverBindingHandle,

                   DeviceHandle, EFI_OPEN_PROTOCOL_BY_DRIVER);

   if (EFI_ERROR (Status)) {

     goto FreeVirtioBlk;

   }

 

   //

-  // We must retain and ultimately restore the original PCI attributes of the

-  // device. See Driver Writer's Guide for UEFI 2.3.1 v1.01, 18.3 PCI drivers /

-  // 18.3.2 Start() and Stop().

-  //

-  // The third parameter ("Attributes", input) is ignored by the Get operation.

-  // The fourth parameter ("Result", output) is ignored by the Enable and Set

-  // operations.

-  //

-  // For virtio-blk we only need IO space access.

-  //

-  Status = Dev->PciIo->Attributes (Dev->PciIo, EfiPciIoAttributeOperationGet,

-                         0, &Dev->OriginalPciAttributes);

-  if (EFI_ERROR (Status)) {

-    goto ClosePciIo;

-  }

-

-  Status = Dev->PciIo->Attributes (Dev->PciIo,

-                         EfiPciIoAttributeOperationEnable,

-                         EFI_PCI_IO_ATTRIBUTE_IO, NULL);

-  if (EFI_ERROR (Status)) {

-    goto ClosePciIo;

-  }

-

-  //

-  // PCI IO access granted, configure virtio-blk device.

+  // VirtIo access granted, configure virtio-blk device.

   //

   Status = VirtioBlkInit (Dev);

   if (EFI_ERROR (Status)) {

-    goto RestorePciAttributes;

+    goto CloseVirtIo;

   }

 

   //

@@ -897,12 +870,8 @@ VirtioBlkDriverBindingStart (
 UninitDev:

   VirtioBlkUninit (Dev);

 

-RestorePciAttributes:

-  Dev->PciIo->Attributes (Dev->PciIo, EfiPciIoAttributeOperationSet,

-                Dev->OriginalPciAttributes, NULL);

-

-ClosePciIo:

-  gBS->CloseProtocol (DeviceHandle, &gEfiPciIoProtocolGuid,

+CloseVirtIo:

+  gBS->CloseProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,

          This->DriverBindingHandle, DeviceHandle);

 

 FreeVirtioBlk:

@@ -973,10 +942,7 @@ VirtioBlkDriverBindingStop (
 

   VirtioBlkUninit (Dev);

 

-  Dev->PciIo->Attributes (Dev->PciIo, EfiPciIoAttributeOperationSet,

-                Dev->OriginalPciAttributes, NULL);

-

-  gBS->CloseProtocol (DeviceHandle, &gEfiPciIoProtocolGuid,

+  gBS->CloseProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,

          This->DriverBindingHandle, DeviceHandle);

 

   FreePool (Dev);

diff --git a/OvmfPkg/VirtioBlkDxe/VirtioBlk.h b/OvmfPkg/VirtioBlkDxe/VirtioBlk.h
index d22570d..789caf9 100644
--- a/OvmfPkg/VirtioBlkDxe/VirtioBlk.h
+++ b/OvmfPkg/VirtioBlkDxe/VirtioBlk.h
@@ -21,7 +21,6 @@
 #include <Protocol/BlockIo.h>

 #include <Protocol/ComponentName.h>

 #include <Protocol/DriverBinding.h>

-#include <Protocol/PciIo.h>

 

 #include <IndustryStandard/Virtio.h>

 

@@ -34,14 +33,13 @@ typedef struct {
   // at various call depths. The table to the right should make it easier to

   // track them.

   //

-  //                    field                     init function       init dpth

-  //                    ----------------------    ------------------  ---------

-  UINT32                Signature;             // DriverBindingStart  0

-  EFI_PCI_IO_PROTOCOL   *PciIo;                // DriverBindingStart  0

-  UINT64                OriginalPciAttributes; // DriverBindingStart  0

-  VRING                 Ring;                  // VirtioRingInit      2

-  EFI_BLOCK_IO_PROTOCOL BlockIo;               // VirtioBlkInit       1

-  EFI_BLOCK_IO_MEDIA    BlockIoMedia;          // VirtioBlkInit       1

+  //                     field                    init function       init dpth

+  //                     ---------------------    ------------------  ---------

+  UINT32                 Signature;            // DriverBindingStart  0

+  VIRTIO_DEVICE_PROTOCOL *VirtIo;              // DriverBindingStart  0

+  VRING                  Ring;                 // VirtioRingInit      2

+  EFI_BLOCK_IO_PROTOCOL  BlockIo;              // VirtioBlkInit       1

+  EFI_BLOCK_IO_MEDIA     BlockIoMedia;         // VirtioBlkInit       1

 } VBLK_DEV;

 

 #define VIRTIO_BLK_FROM_BLOCK_IO(BlockIoPointer) \

@@ -66,11 +64,6 @@ typedef struct {
       underlying device

     - 9 Driver Binding Protocol -- for exporting ourselves

 

-  Specs relevant in the specific sense:

-  - UEFI Spec 2.3.1 + Errata C, 13.4 EFI PCI I/O Protocol

-  - Driver Writer's Guide for UEFI 2.3.1 v1.01, 18 PCI Driver Design

-    Guidelines, 18.3 PCI drivers.

-

   @param[in]  This                The EFI_DRIVER_BINDING_PROTOCOL object

                                   incorporating this driver (independently of

                                   any device).

@@ -82,11 +75,10 @@ typedef struct {
 

   @retval EFI_SUCCESS      The driver supports the device being probed.

 

-  @retval EFI_UNSUPPORTED  Based on virtio-blk PCI discovery, we do not support

+  @retval EFI_UNSUPPORTED  Based on virtio-blk discovery, we do not support

                            the device.

 

-  @return                  Error codes from the OpenProtocol() boot service or

-                           the PciIo protocol.

+  @return                  Error codes from the OpenProtocol() boot service.

 

 **/

 

@@ -117,14 +109,14 @@ VirtioBlkDriverBindingSupported (
 

 

   @retval EFI_SUCCESS           Driver instance has been created and

-                                initialized  for the virtio-blk PCI device, it

+                                initialized  for the virtio-blk device, it

                                 is now accessibla via EFI_BLOCK_IO_PROTOCOL.

 

   @retval EFI_OUT_OF_RESOURCES  Memory allocation failed.

 

   @return                       Error codes from the OpenProtocol() boot

-                                service, the PciIo protocol, VirtioBlkInit(),

-                                or the InstallProtocolInterface() boot service.

+                                service, VirtioBlkInit(), or the

+                                InstallProtocolInterface() boot service.

 

 **/

 

diff --git a/OvmfPkg/VirtioBlkDxe/VirtioBlk.inf b/OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
index 6dffc3a..d5975b7 100644
--- a/OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+++ b/OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
@@ -38,5 +38,5 @@
   VirtioLib

 

 [Protocols]

-  gEfiBlockIoProtocolGuid  ## BY_START

-  gEfiPciIoProtocolGuid    ## TO_START

+  gEfiBlockIoProtocolGuid   ## BY_START

+  gVirtioDeviceProtocolGuid ## TO_START