Age | Commit message (Collapse) | Author | Files | Lines |
|
Install the callback of gEfiPeiMemoryDiscoveredPpiGuid
to create gEdkiiVariableRuntimeCacheInfoHobGuid in
VariablePei module. When PcdEnableVariableRuntimeCache
is TRUE, the callback will be installed to allocate
the needed buffer for different type variable runtime
cache, unblock the buffer and build this HOB. Then the
runtime cache buffer address and size will be saved in
the HOB content.
Signed-off-by: Dun Tan <dun.tan@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Updates VariableRuntimeDxe, VariableSmm, and VariableStandaloneMm
to acquire variable flash information from the Variable Flash
Information library.
Note: This introduces a dependency on VariableFlashInfoLib in these
modules. Therefore, a platform building the variable modules must
specify an instance of VariableFlashInfoLib in their platform build.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1373
Replace BSD 2-Clause License with BSD+Patent License. This change is
based on the following emails:
https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html
https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html
RFCs with detailed process for the license change:
V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html
V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html
V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
|
|
Don't check BOOT_IN_RECOVERY_MODE, but check PcdEmuVariableNvModeEnable
which platform can configure flexibly.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
|
|
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
What to do:
1. Merge from VariablePei in SecurityPkg to VariablePei in MdeModulePkg.
Why to do:
1. Remove code duplication and reduce maintenance effort.
The code logic of VariablePei in SecurityPkg is same with VariablePei
in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17756 6f19259b-4bc3-4df7-8a09-765794883524
|
|
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15962 6f19259b-4bc3-4df7-8a09-765794883524
|
|
PEI variable implementation checks only the variable header signature for validity. This does not seem robust if system crash occurred during previous Reclaim() operation. If the crash occurred while FTW was rewriting the variable FV, the signature could be valid even though the rest of the FV isn't valid.
Solution: Add a FaultTolerantWritePei driver to check and provide the FTW last write status, then PEI variable and early phase(before FTW protocol ready) of DXE variable can check the status and determine if all or partial variable data has been backed up in spare block, and then use the backed up data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14454 6f19259b-4bc3-4df7-8a09-765794883524
|
|
to use its attributes
The Variable PEI and RuntimeDxe drivers were using the attribute 'HeaderLength' of
EFI_FIRMWARE_VOLUME_HEADER without checking if a Firmware Volume Header was existing at
the base address.
In case the Firmware Volume Header does not exist or is corrupted, the attribute 'HeaderLength'
is a non valid value that can lead to a non valid physical address when accessing produces an
access error.
Signed-off-by: oliviermartin
Reviewed-by: niruiyu
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12836 6f19259b-4bc3-4df7-8a09-765794883524
|
|
drivers.
Reviewed-by: lgao4, gdong1
Signed-off-by: sfu5
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11755 6f19259b-4bc3-4df7-8a09-765794883524
|
|
EFI_NOT_FOUND
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11397 6f19259b-4bc3-4df7-8a09-765794883524
|
|
ReadOnlyVariable2Ppi should return EFI_NOT_FOUND
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11387 6f19259b-4bc3-4df7-8a09-765794883524
|
|
>4G. For backward compatability if the new 64-bit base addresses are zero use the old 32-bit base addressess.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10684 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10418 6f19259b-4bc3-4df7-8a09-765794883524
|
|
2. Remove unnecessary .common] postfix on section.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10052 6f19259b-4bc3-4df7-8a09-765794883524
|
|
VariableIndexTable among various archs.
1. record the distance of two neighboring VAR_ADDED type variables rather than the offset of each variable. As the field recording this info is UINT16 width, the latter causes in IA32/X64 platform, it can only cache those variables from offset 0 to offset 2^16; in IPF platform, from offset 0 to offset 2^18(extend the scope by left-shift the offset two bits).
when taking the former algorithm, the max range of caching variable is from offset 0 to offset 122*(2^16)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8625 6f19259b-4bc3-4df7-8a09-765794883524
|
|
2. move VariableFormat.h into GUID directory and change the “Signature” field of the VARIABLE_STORE_HEADER to gEfiVariableGuid value.
3. merging VARIABLE_INFO_ENTRY structure into the new Include/Guid/VariableFormat.h
4. change gEfiVariableInfoGuid into gEfiVariableGuid.
5. modify FDF files to use new guid value instead of the original signature.
6. all code related to signature is changed to use guid value.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7728 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7220 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7208 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7152 6f19259b-4bc3-4df7-8a09-765794883524
|
|
gEfiPeiReadOnlyVariable2PpiGuid but not consumes it
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7086 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@6995 6f19259b-4bc3-4df7-8a09-765794883524
|
|
review VALID_ARCHITECTURES in inf files with DSC file.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@6818 6f19259b-4bc3-4df7-8a09-765794883524
|
|
MdeModulePkg\Universal\Variable\Pei
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@6475 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4403 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4268 6f19259b-4bc3-4df7-8a09-765794883524
|
|
spec 0.41, DSC spec 0.40.
Mainly PCD syntax update.
Check in new build.exe and GenFds.exe
Check in PcdSyntaxUpdate.exe tool.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@3744 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@3536 6f19259b-4bc3-4df7-8a09-765794883524
|
|
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@3370 6f19259b-4bc3-4df7-8a09-765794883524
|