| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fire an event if a long delay occurs when starting an NVMe device.
This can be used by platforms to draw pictures on the screen or
take other actions to notify a user or move boot forward.
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
|
|
REF : https://bugzilla.tianocore.org/show_bug.cgi?id=4787
If ACPI Silicon Hob has been found from entry of AcpiTableDxe driver,
that means SOC related ACPI tables been pass to the DXE phase by HOB.
Each SOC related ACPI tables will be install.
Signed-off-by: George Liao <george.liao@intel.com>
|
|
Now that all of the EFI_MEMORY_* defines live in the
EFI_MEMORY_TYPE enum, remove the old defines.
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
|
|
Makes the `#` character used for comparison against wildcard
characters in `CHAR16` strings to be prefixed with `L` so the
character is treated as a wide character constant.
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
|
|
Includes the profiler SMI in the profile itself for completeness.
Co-authored-by: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2411
With Use-After-Free heap guard feature enabled, the DxeCore would blindly
attempt to "level-up" when the `GuardAllFreedPages` inspect a non-max
level table entry from the last loop. This could cause the next round of
inspection to dereference a potentially null pointer and as such causing
a page fault.
This change adds a null pointer check to prevent such case from happening.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Kun Qin <kun.qin@microsoft.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4655
[Feature Description]
- UFS device would clear fDeviceInit flag once the device initialization
is completed.
- This change is polling to check the flag is cleared or not with
specific timeout (UFS_INIT_COMPLETION_TIMEOUT - 600ms).
- This behavior is the same as UfsPassThruDxe module.
[Notes]
- This change included as a partial of below SHA1-ID
- 95ad8f7f6a6c84ef46a96a8ba852afed805d1ca3
- c5740f360636479fb91681093b1dee1cc366075c
Signed-off-by: Jason1 Lin <jason1.lin@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4653
In DxeIplFindDxeCore function, there exists different behavior between
Debug and Release built BIOS. This change is used to unify both of
the code flow and fix the potential overflow of "Instance" variable.
In this change,
[1] Move the ASSERT_EFI_ERROR (Status) in failure to find DxeCore
in any firmware volume condition.
[2] Break the while-loop when not found required DxeCore.
This would make the Instance variable not overflow in while-loop.
[3] Add the CpuDeadLoop () in the end of the function and do not
return since DxeCore is mandatory for the following booting
to hand-off the PEI phase to DXE phase.
[4] In case of the CpuDeadLoop () is de-assert by debugger,
return the NULL pointer.
Signed-off-by: Jason1 Lin <jason1.lin@intel.com>
|
|
The code prints wide strings, so the content should be "utf-16"
rather than "utf-8".
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
|
|
Makes the `mInternalRT` global static in this library instance to
avoid conflicting with other code such as a global variable with
the same name in MdePkg/Library/UefiRuntimeLib.
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
|
|
Removes an assert if PeiAllocatePool() fails to allocate memory to
defer error handling to the caller so the error can be handled
gracefully or asserted at that location which is more specific to
the call that led to the allocation.
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
|
|
The HobPrintLib prints all HOB info from the HOB list. The code is
abstracted from UefiPayloadPkg/UefiPayloadEntry/PrintHob.c.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
|
|
Interface PrintHobList() is added to dump all HOBs info in the HobList.
Caller could specify a custom HOB print handler to replace the default
print handler when calling the interface.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
|
|
VariableSmmIsBufferOutsideSmmValid function is to check the buffer
is outside SMM or not. This patch fix the issue that always return
true for MM.
Meanwhile, this patch renames VariableSmmIsBufferOutsideSmmValid
to VariableSmmIsNonPrimaryBufferValid.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
|
|
Add a new function (VariableSmmIsPrimaryBufferValid) to check
Primary Buffer valid or not.
original function (VariableSmmIsBufferOutsideSmmValid) is used to
check the buffer outside MMRAM.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
|
|
For MM, the MM Handlers do not need to validate the buffer if it is
the CommBuffer passed from MmCore through the MmiHandler() parameter.
Return TRUE directly in this case. Fix buffer valid check for MM in
this patch.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
|
|
In the MdeModulePkg/VarCheckPolicyLib, the Primary Buffer
(CommBuffer) check function has been updated to match the buffer
validation behavior.
For SMM, the SMM Handlers is to validate the buffer outside MMRAM.
For MM, the MM Handlers do not need to validate the buffer if it is
the CommBuffer passed from MmCore through the MmiHandler() parameter.
Return TRUE directly in this case. Existing code is incorrect for
the MM check. This will be fixed in the following patch.
There is no function impact.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
|
|
In the MdeModulePkg/FaultTolerantWriteSmm, the Primary Buffer
(CommBuffer) check function has been updated to match the buffer
validation behavior:
For SMM, the SMM Handlers is to validate the buffer outside MMRAM.
For MM, the MM Handlers do not need to validate the buffer if it is
the CommBuffer passed from MmCore through the MmiHandler() parameter.
Return TRUE directly in this case.
There is no function impact.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
|
|
Support the module type for MM_CORE_STANDALONE
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Signed-off-by: Mike Maslenkin <mike.maslenkin@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Eui64 is a 64 bit value, so the "L" or "l" is required for
format specifier, otherwise only lower 32 bit will be converted.
Signed-off-by: Mike Maslenkin <mike.maslenkin@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
BZ #4456
Fixed a bug which led to an ASSERT due to the USB device
context being maintained after a port reset, but the
underlying XHCI context was uninitialized. Specifically,
Xhc->UsbDevContext is freed after a reset and only
re-allocates the default [0] enpoint transfer ring.
In order to avoid a memory leak, device enumeration is
performed after freeing the necessary buffers. This
allocates the Xhc->UsbDevContext for all endpoints of
the USB device.
Signed-off-by: Britton Chesley <Brit.Chesley@amd.com>
|
|
BZ #4790
Support "^" and "V" key stokes on the pop-up form. Align the
implementation with key support on the regular HII form.
Signed-off-by: Gaurav Pandya <gaurav.pandya@amd.com>
|
|
The presense of PdbPointer (PDB file name) is not an error. Hence, the
debug message should be categorized as VERBOSE or INFO. However, the
DEBUG_VERBOSE is more appropriate since the PDB file name is already
output by the PeCoffLoaderRelocateImageExtraAction() function with the
inline "add-symbol-file" when a platform uses the library instance
DebugPeCoffExtraActionLib.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
|
|
HBM/CXL memory systems are treated as special purpose memories. In many
cases it is desirable not to use special purpose memory for regular edk2
usages as these memories (HBm/CXL) are either meant for special purposes
or are less reliable to be used. Until such memory systems evolve and
we have better clarity from UEFI spec, avoid using them for edk2
boot memory purposes.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Oliver Smith-Denny <osde@linux.microsoft.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Co-authored-by: Tim Wawrzynczak <tim@rivosinc.com>
|
|
The commit "MdeModulePkg/DxeCapsuleLibFmp: Fix crash if no ESRT is
found" leads to a compilation error in
MdeModulePkg/Library/DxeCapsuleLibFmp/DxeCapsuleLib.inf. The issue
occurs because the variable mDxeCapsuleLibReadyToBootEvent which is
declared as extern does not exist, while it is defined in
DxeCapsuleRuntime.c, a file not included in DxeCapsuleLib.inf. This
patch is to fix this by moving the variable defintion to DxeCapsuleLib.c
and declare it as extern in DxeCapsuleRuntime.c.
Reported-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4716
Migrate FSP-T/M binary from temporary RAM to permanent RAM before NEM
tear down. Tcg module will use permanent address of FSP-T/M for
measurement. In MdeModulePkg, PeiCore installs mMigrateTempRamPpi if
PcdMigrateTemporaryRamFirmwareVolumes is True before NEM tear down and
after permanent memory ready.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Duggapu Chinni B <chinni.b.duggapu@intel.com>
Cc: Chen Gang C <gang.c.chen@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
|
|
Add global variable mVariableRtCacheInfo to save the
content in gEdkiiVariableRuntimeCacheInfoHobGuid. With
this new global variable, 7 global variables can be
removed.
Signed-off-by: Dun Tan <dun.tan@intel.com>
|
|
Refine the code logic in InitVariableCache().
In this commit, three times calling of
InitVariableCache() for different type cache are
merged into one calling. This commit is to make
the code looks cleaner and doesn't change any
code functionality.
Signed-off-by: Dun Tan <dun.tan@intel.com>
|
|
Remove the usage of PcdEnableVariableRuntimeCache. We can
use the existence of gEdkiiVariableRuntimeCacheInfoHobGuid
to indicate if variable runtime cache is enabled or not.
Signed-off-by: Dun Tan <dun.tan@intel.com>
|
|
Consume gEdkiiVariableRuntimeCacheInfoHobGuid in
VariableSmmRuntimeDxe driver to initialize the following
variable cache related buffer:
*mVariableRuntimeHobCacheBuffer
*mVariableRuntimeNvCacheBuffer
*mVariableRuntimeVolatileCacheBuffer
*mVariableRuntimeCachePendingUpdate
*mVariableRuntimeCacheReadLock
*mHobFlushComplete
The code to to allocate
and unblock the buffer for
different type cache in VariableSmmRuntimeDxe is also
removed in this commit.
Signed-off-by: Dun Tan <dun.tan@intel.com>
|
|
Remove unneed FreePages() for RuntimeHobCacheBuffer which is
allocated in PEI phase.
So the global variable mVariableRuntimeHobCacheBufferSize
also can be removed.
Signed-off-by: Dun Tan <dun.tan@intel.com>
|
|
Remove the two unnecessary global variables and
replace them by two local variables:
mVariableRuntimeNvCacheBufferSize
mVariableRuntimeVolatileCacheBufferSize
Signed-off-by: Dun Tan <dun.tan@intel.com>
|
|
Install the callback of gEfiPeiMemoryDiscoveredPpiGuid
to create gEdkiiVariableRuntimeCacheInfoHobGuid in
VariablePei module. When PcdEnableVariableRuntimeCache
is TRUE, the callback will be installed to allocate
the needed buffer for different type variable runtime
cache, unblock the buffer and build this HOB. Then the
runtime cache buffer address and size will be saved in
the HOB content.
Signed-off-by: Dun Tan <dun.tan@intel.com>
|
|
This commit defines VARIABLE_RUNTIME_CACHE_INFO HOB.
The HOB is used to store the address and size of the
buffer that will be used for variable runtime service
when the PcdEnableVariableRuntimeCache is TRUE.
In following patches, when PcdEnableVariableRuntimeCache
is TRUE, VariablePei module will install a callback of
gEfiPeiMemoryDiscoveredPpiGuid to allocate needed buffer
for different type cache, unblock the buffer and build HOB.
Then VariableSmmRuntimeDxe driver will consume the
gEdkiiVariableRuntimeCacheInfoHobGuid to initialize the
variable runtime cache related content.
Signed-off-by: Dun Tan <dun.tan@intel.com>
|
|
The ESRT table is not required in UEFI firmware. In such cases, the
table may not be present in the UEFI Configuration Table. The mEsrtTable
is to check if the IsNestedFmpCapsule() function is invoked at runtime
to determine whether to use gEsrtManagementProtocolGuid or the ESRT
table from the Configuration Table. Unfortunately, the check does not
cover situations where the ESRT is not present, potentially resulting in
a kernel crash. This patch is intended to fix this issue.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
|
|
Instead of copying from unallocated memory in RemoveTableFromRsdt, do a
CopyMem followed by ZeroMem.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
|
|
Emit a DEBUG_WARN message if there is not enough flash space left to
write/update a variable. This condition is currently not logged
appropriately in all cases, given that full variable store can easily
render the system unbootable.
This new message helps identifying this condition.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
It is legal for the VarStoreId of a question to
be 0 per the UEFI spec:
"Specifies the identifier of a previously
declared variable store to use when storing the
question’s value. A value of zero indicates
no associated variable store."
Instead of hitting an assert just skip this
question as there is no value to return.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
|
|
Struct assignments are not permitted in EDK2, as they may be converted
by the compiler into calls to the 'memcpy' intrinsic, which is not
guaranteed to be available in EDK2.
So replace the assignment with a call to CopyMem (), and -while at it-
replace the loop with a single CopyMem () call, as the loop operates on
items that are contiguous in memory.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This MpService2Ppi field in SMM_S3_RESUME_STATE is used to
wakeup AP to do the CPU initialization during smm s3 boot when
the execution mode of PEI and DXE are the same.
Currently, in CpuS3.c of smm cpu driver, BSP doesn't need to
wakeup AP anymore. The initialization for AP will be done in
S3Resume.c before transfer to CpuS3.c of smm cpu driver.
So we can remove the MpService2Ppi field in SMM_S3_RESUME_STATE.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Add gEdkiiS3MtrrSettingGuid a new GUID for s3
MTRR setting. This GUID will be used to save
MTRR_SETTINGS at EndOfDxe by LockBox and restore
at S3 boot PEI phase for s3 usage.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
|
|
Add a new entry into GCD attribute conversion table to convert
EFI_RESOURCE_ATTRIBUTE_SPECIAL_PURPOSE to EFI_MEMORY_SP.
Signed-off-by: Du Lin <du.lin@intel.com>
|
|
The local variable 'WillReturn' was being used without prior
initialization in some code paths.
This patch ensures that 'WillReturn' is properly initialized
to prevent undefined behavior.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4677
Attacker able to modify physical memory and ResumeCount.
System will crash/DoS when ResumeCount reaches its MAX_UINT32.
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Pakkirisamy ShanmugavelX <shanmugavelx.pakkirisamy@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
EFI_RESOURCE_MEMORY_UNACCEPTED has been officially defined in the PI
1.8 specification. So all temporary solutions have been replaced with
the actual definition.
Cc: Felix Polyudov <felixp@ami.com>
Cc: Dhanaraj V <vdhanaraj@ami.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Sachin Ganesh <sachinganesh@ami.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Including the SpiHc drivers in MdeModulePkg.dsc
Bugzilla #4753
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Signed-off-by: Brit Chesley <brit.chesley@amd.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Added SpiHc DXE and SMM drivers. This code receives bus transactions
from the SpiBus layer and passes them onto the SpiHcPlatformLib
Platform Initialization Spec 1.7 volume 5 section 18.1.7
Bugzilla #4753
Cc: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Signed-off-by: Brit Chesley <brit.chesley@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
|
|
Adding NULL SpiHcPlatformLib instance. This library is responsible for
handling the low level details of the SPI host controller. Since this is
platform specific this library will be dependent on OEM SPI
implementation. The SPI host controller layer will utilize this library
for SPI bus transactions.
Bugzilla #4753
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Signed-off-by: Brit Chesley <brit.chesley@amd.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
|
Including the SpiBus drivers in MdeModulePkg.dsc
Platform Initialization spec 1.7 volume 5 section 18.1.6
Bugzilla #4753
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Signed-off-by: Brit Chesley <brit.chesley@amd.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
|
