aboutsummaryrefslogtreecommitdiff
path: root/tcg
AgeCommit message (Collapse)AuthorFilesLines
2019-09-04Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190903' into stagingPeter Maydell14-232/+143
Allow page table bit to swap endianness. Reorganize watchpoints out of i/o path. Return host address from probe_write / probe_access. # gpg: Signature made Tue 03 Sep 2019 16:47:50 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-tcg-20190903: (36 commits) tcg: Factor out probe_write() logic into probe_access() tcg: Make probe_write() return a pointer to the host page s390x/tcg: Pass a size to probe_write() in do_csst() hppa/tcg: Call probe_write() also for CONFIG_USER_ONLY mips/tcg: Call probe_write() for CONFIG_USER_ONLY as well tcg: Enforce single page access in probe_write() tcg: Factor out CONFIG_USER_ONLY probe_write() from s390x code s390x/tcg: Fix length calculation in probe_write_access() s390x/tcg: Use guest_addr_valid() instead of h2g_valid() in probe_write_access() tcg: Check for watchpoints in probe_write() cputlb: Handle watchpoints via TLB_WATCHPOINT cputlb: Remove double-alignment in store_helper cputlb: Fix size operand for tlb_fill on unaligned store exec: Factor out cpu_watchpoint_address_matches cputlb: Fold TLB_RECHECK into TLB_INVALID_MASK exec: Factor out core logic of check_watchpoint() exec: Move user-only watchpoint stubs inline target/sparc: sun4u Invert Endian TTE bit target/sparc: Add TLB entry with attributes cputlb: Byte swap memory transaction attribute ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-03tcg: TCGMemOp is now accelerator independent MemOpTony Nguyen14-232/+143
Preparation for collapsing the two byte swaps, adjust_endianness and handle_bswap, along the I/O path. Target dependant attributes are conditionalized upon NEED_CPU_H. Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-09-03tcg/README: fix typo s/afterwise/afterwards/Emilio G. Cota1-1/+1
Afterwise is "wise after the fact", as in "hindsight". Here we meant "afterwards" (as in "subsequently"). Fix it. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190828165307.18321-7-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-20configure: Define target access alignment in configuretony.nguyen@bt.com2-4/+6
This patch moves the define of target access alignment earlier from target/foo/cpu.h to configure. Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now accelerator independent MemOp" Signed-off-by: Tony Nguyen <tony.nguyen@bt.com> Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Clean up inclusion of exec/cpu-common.hMarkus Armbruster3-3/+0
migration/qemu-file.h neglects to include it even though it needs ram_addr_t. Fix that. Drop a few superfluous inclusions elsewhere. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-14-armbru@redhat.com>
2019-07-14tcg/aarch64: Fix output of extract2 opcodesRichard Henderson1-1/+1
This patch fixes two problems: (1) The inputs to the EXTR insn were reversed, (2) The input constraints use rZ, which means that we need to use the REG0 macro in order to supply XZR for a constant 0 input. Fixes: 464c2969d5d Reported-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-07-14tcg: Fix constant folding of INDEX_op_extract2_i32Richard Henderson1-2/+2
On a 64-bit host, discard any replications of the 32-bit sign bit when performing the shift and merge. Fixes: https://bugs.launchpad.net/bugs/1834496 Tested-by: Christophe Lyon <christophe.lyon@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-07-09tcg: Fix expansion of INDEX_op_not_vecRichard Henderson1-0/+6
This operation can always be emitted, even if we need to fall back to xor. Adjust the assertions to match. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-07-09tcg/riscv: Fix RISC-VH host build failureAlistair Francis1-2/+2
Commit 269bd5d8 "cpu: Move the softmmu tlb to CPUNegativeOffsetState' broke the RISC-V host build as there are two variables that are used but not defined. This patch renames the undefined variables mask_off and table_off to the existing (but unused) mask_ofs and table_ofs variables. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <79729cc88ca509e08b5c4aa0aa8a52847af70c0f.1561039316.git.alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-07-05general: Replace global smp variables with smp machine propertiesLike Xu1-1/+12
Basically, the context could get the MachineState reference via call chains or unrecommended qdev_get_machine() in !CONFIG_USER_ONLY mode. A local variable of the same name would be introduced in the declaration phase out of less effort OR replace it on the spot if it's only used once in the context. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190518205428.90532-4-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-12Supply missing header guardsMarkus Armbruster2-0/+10
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-5-armbru@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster6-6/+0
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-10tcg/arm: Remove mostly unreachable tlb special caseRichard Henderson1-11/+12
There was nothing armv7 specific about the bic+cmp sequence, however looking at the set of guests more closely shows that the 8-bit immediate operand for the bic can only be satisfied with one guest in tree: baseline m-profile -- 10-bit pages with aligned 4-byte memory ops. Therefore it does not seem useful to keep this path. Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10tcg/arm: Use LDRD to load tlb mask+tableRichard Henderson1-26/+40
This changes the code generation for the tlb from e.g. ldr ip, [r6, #-0x10] ldr r2, [r6, #-0xc] and ip, ip, r4, lsr #8 ldrd r0, r1, [r2, ip]! ldr r2, [r2, #0x18] to ldrd r0, r1, [r6, #-0x10] and r0, r0, r4, lsr #8 ldrd r2, r3, [r1, r0]! ldr r1, [r1, #0x18] for armv7 hosts. Rearranging the register allocation in order to avoid overlap between the two ldrd pairs causes the patch to be larger than it ordinarily would be. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10tcg/aarch64: Use LDP to load tlb mask+tableRichard Henderson1-7/+8
This changes the code generation for the tlb from e.g. ldur x0, [x19, #0xffffffffffffffe0] ldur x1, [x19, #0xffffffffffffffe8] and x0, x0, x20, lsr #8 add x1, x1, x0 ldr x0, [x1] ldr x1, [x1, #0x18] to ldp x0, x1, [x19, #-0x20] and x0, x0, x20, lsr #8 add x1, x1, x0 ldr x0, [x1] ldr x1, [x1, #0x18] Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Move the softmmu tlb to CPUNegativeOffsetStateRichard Henderson8-159/+59
We have for some time had code within the tcg backends to handle large positive offsets from env. This move makes sure that need not happen. Indeed, we are able to assert at build time that simple offsets suffice for all hosts. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10tcg: Create struct CPUTLBRichard Henderson8-57/+19
Move all softmmu tlb data into this structure. Arrange the members so that we are able to place mask+table together and at a smaller absolute offset from ENV. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg/i386: Use MOVDQA for TCG_TYPE_V128 load/storeRichard Henderson1-2/+22
This instruction raises #GP, aka SIGSEGV, if the effective address is not aligned to 16-bytes. We have assertions in tcg-op-gvec.c that the offset from ENV is aligned, for vector types <= V128. But the offset itself does not validate that the final pointer is aligned -- one must also remember to use the QEMU_ALIGNED() attribute on the vector member within ENV. PowerPC Altivec has vector load/store instructions that silently discard the low 4 bits of the address, making alignment mistakes difficult to discover. Aid that by making the most popular host visibly signal the error. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg/aarch64: Allow immediates for vector ORR and BICRichard Henderson1-7/+83
The allows immediates to be used for ORR and BIC, as well as the trivial inversions, ORC and AND. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg/aarch64: Build vector immediates with two insnsRichard Henderson1-0/+47
Use MOVI+ORR or MVNI+BIC in order to build some vector constants, as opposed to dropping them to the constant pool. This includes all 16-bit constants and a similar set of 32-bit constants. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg/aarch64: Use MVNI in tcg_out_dupi_vecRichard Henderson1-0/+11
The compliment of a subset of immediates can be computed with a single instruction. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg/aarch64: Split up is_fimmRichard Henderson1-84/+119
There are several sub-classes of vector immediate, and only MOVI can use them all. This will enable usage of MVNI and ORRI, which use progressively fewer sub-classes. This patch adds no new functionality, merely splits the function and moves part of the logic into tcg_out_dupi_vec. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg/aarch64: Support vector bitwise select valueRichard Henderson2-2/+24
The instruction set has 3 insns that perform the same operation, only varying in which operand must overlap the destination. We can represent the operation without overlap and choose based on the operands seen. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg/i386: Use umin/umax in expanding unsigned compareRichard Henderson1-19/+61
Using umin(a, b) == a as an expansion for TCG_COND_LEU is a better alternative to (a - INT_MIN) <= (b - INT_MIN). Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg/i386: Remove expansion for missing minmaxRichard Henderson1-37/+0
This is now handled by code within tcg-op-vec.c. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg/i386: Support vector comparison select valueRichard Henderson2-5/+36
We already had backend support for this feature. Expand the new cmpsel opcode using vpblendb. The combination allows us to avoid an extra NOT for some comparison codes. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg: Add TCG_OPF_NOT_PRESENT if TCG_TARGET_HAS_foo is negativeRichard Henderson1-1/+1
If INDEX_op_foo is always expanded by tcg_expand_vec_op, then there may be no reasonable set of constraints to return from tcg_target_op_def for that opcode. Let TCG_TARGET_HAS_foo be specified as -1 in that case. Thus a boolean test for TCG_TARGET_HAS_foo is true, but we will not assert within process_op_defs when no constraints are specified. Compare this with tcg_can_emit_vec_op, which already uses this tri-state indication. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg: Expand vector minmax using cmp+cmpselRichard Henderson1-4/+16
Provide a generic fallback for the min/max operations. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg: Introduce do_op3_nofail for vector expansionRichard Henderson1-18/+27
This makes do_op3 match do_op2 in allowing for failure, and thus fall back expansions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg: Add support for vector compare selectRichard Henderson8-0/+75
Perform a per-element conditional move. This combination operation is easier to implement on some host vector units than plain cmp+bitsel. Omit the usual gvec interface, as this is intended to be used by target-specific gvec expansion call-backs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg: Add support for vector bitwise selectRichard Henderson10-0/+70
This operation performs d = (b & a) | (c & ~a), and is present on a majority of host vector units. Include gvec expanders. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg: Fix missing checks and clears in tcg_gen_gvec_dup_memRichard Henderson1-23/+25
The paths through tcg_gen_dup_mem_vec and through MO_128 were missing the check_size_align. The path through MO_128 was also missing the expand_clr. This last was not visible because the only user is ARM SVE, which would set oprsz == maxsz, and not require the clear. Fix by adding the check_size_align and using do_dup directly instead of duplicating the check in tcg_gen_gvec_dup_{i32,i64}. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22tcg/i386: Fix dupi/dupm for avx1 and 32-bit hostsRichard Henderson1-3/+4
The VBROADCASTSD instruction only allows %ymm registers as destination. Rather than forcing VEX.L and writing to the entire 256-bit register, revert to using MOVDDUP with an %xmm register. This is sufficient for an avx1 host since we do not support TCG_TYPE_V256 for that case. Also fix the 32-bit avx2, which should have used VPBROADCASTW. Fixes: 1e262b49b533 Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg/aarch64: Do not advertise minmax for MO_64Richard Henderson1-4/+4
The min/max instructions are not available for 64-bit elements. Fixes: 93f332a50371 Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg/aarch64: Support vector absolute valueRichard Henderson2-1/+7
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg/i386: Support vector absolute valueRichard Henderson2-1/+16
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Add support for vector absolute valueRichard Henderson9-0/+114
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Add support for integer absolute valueRichard Henderson2-0/+25
Remove a function of the same name from target/arm/. Use a branchless implementation of abs gleaned from gcc. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg/i386: Support vector scalar shift opcodesRichard Henderson2-1/+36
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Add gvec expanders for vector shift by scalarRichard Henderson4-0/+279
Allow expansion either via shift by scalar or by replicating the scalar for shift by vector. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- v3: Use a private structure for do_gvec_shifts.
2019-05-13tcg/aarch64: Support vector variable shift opcodesRichard Henderson3-1/+45
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg/i386: Support vector variable shift opcodesRichard Henderson2-1/+36
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Add gvec expanders for variable shiftRichard Henderson4-0/+225
The gvec expanders perform a modulo on the shift count. If the target requires alternate behaviour, then it cannot use the generic gvec expanders anyway, and will have to have its own custom code. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Add INDEX_op_dupm_vecRichard Henderson7-41/+70
Allow the backend to expand dup from memory directly, instead of forcing the value into a temp first. This is especially important if integer/vector register moves do not exist. Note that officially tcg_out_dupm_vec is allowed to fail. If it did, we could fix this up relatively easily: VECE == 32/64: Load the value into a vector register, then dup. Both of these must work. VECE == 8/16: If the value happens to be at an offset such that an aligned load would place the desired value in the least significant end of the register, go ahead and load w/garbage in high bits. Load the value w/INDEX_op_ld{8,16}_i32. Attempt a move directly to vector reg, which may fail. Store the value into the backing store for OTS. Load the value into the vector reg w/TCG_TYPE_I32, which must work. Duplicate from the vector reg into itself, which must work. All of which is well and good, except that all supported hosts can support dupm for all vece, so all of the failure paths would be dead code and untestable. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg/aarch64: Implement tcg_out_dupm_vecRichard Henderson1-2/+35
The LD1R instruction does all the work. Note that the only useful addressing mode is a base register with no offset. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg/i386: Implement tcg_out_dupm_vecRichard Henderson1-14/+43
At the same time, improve tcg_out_dupi_vec wrt broadcast from the constant pool. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Add tcg_out_dupm_vec to the backend interfaceRichard Henderson3-1/+31
Currently stubbed out in all backends that support vectors. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13tcg: Manually expand INDEX_op_dup_vecRichard Henderson3-10/+118
This case is similar to INDEX_op_mov_* in that we need to do different things depending on the current location of the source. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- v3: Added some commentary to the tcg_reg_alloc_* functions.
2019-05-13tcg: Promote tcg_out_{dup,dupi}_vec to backend interfaceRichard Henderson3-3/+26
The i386 backend already has these functions, and the aarch64 backend could easily split out one. Nothing is done with these functions yet, but this will aid register allocation of INDEX_op_dup_vec in a later patch. Adjust the aarch64 tcg_out_dupi_vec signature to match the new interface. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.1 at 2024-11-01 14:49:53 +0000