aboutsummaryrefslogtreecommitdiff
path: root/target/i386/cpu.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-09disas: Remove old libopcode i386 disassemblerThomas Huth1-1/+0
Capstone should be superior to the old libopcode disassembler, so we can drop the old file nowadays. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220412165836.355850-4-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-04-06hyperv: Add support to process syndbg commandsJon Doron1-0/+2
SynDbg commands can come from two different flows: 1. Hypercalls, in this mode the data being sent is fully encapsulated network packets. 2. SynDbg specific MSRs, in this mode only the data that needs to be transfered is passed. Signed-off-by: Jon Doron <arilou@gmail.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20220216102500.692781-4-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-24target/i386: properly reset TSC on resetPaolo Bonzini1-0/+13
Some versions of Windows hang on reboot if their TSC value is greater than 2^54. The calibration of the Hyper-V reference time overflows and fails; as a result the processors' clock sources are out of sync. The issue is that the TSC _should_ be reset to 0 on CPU reset and QEMU tries to do that. However, KVM special cases writing 0 to the TSC and thinks that QEMU is trying to hot-plug a CPU, which is correct the first time through but not later. Thwart this valiant effort and reset the TSC to 1 instead, but only if the CPU has been run once. For this to work, env->tsc has to be moved to the part of CPUArchState that is not zeroed at the beginning of x86_cpu_reset. Reported-by: Vadim Rozenfeld <vrozenfe@redhat.com> Supersedes: <20220324082346.72180-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-23KVM: x86: workaround invalid CPUID[0xD,9] info on some AMD processorsPaolo Bonzini1-2/+2
Some AMD processors expose the PKRU extended save state even if they do not have the related PKU feature in CPUID. Worse, when they do they report a size of 64, whereas the expected size of the PKRU extended save state is 8, therefore the esa->size == eax assertion does not hold. The state is already ignored by KVM_GET_SUPPORTED_CPUID because it was not enabled in the host XCR0. However, QEMU kvm_cpu_xsave_init() runs before QEMU invokes arch_prctl() to enable dynamically-enabled save states such as XTILEDATA, and KVM_GET_SUPPORTED_CPUID hides save states that have yet to be enabled. Therefore, kvm_cpu_xsave_init() needs to consult the host CPUID instead of KVM_GET_SUPPORTED_CPUID, and dies with an assertion failure. When setting up the ExtSaveArea array to match the host, ignore features that KVM does not report as supported. This will cause QEMU to skip the incorrect CPUID leaf instead of tripping the assertion. Closes: https://gitlab.com/qemu-project/qemu/-/issues/916 Reported-by: Daniel P. Berrangé <berrange@redhat.com> Analyzed-by: Yang Zhong <yang.zhong@intel.com> Reported-by: Peter Krempa <pkrempa@redhat.com> Tested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-15KVM: SVM: always set MSR_AMD64_TSC_RATIO to default valueMaxim Levitsky1-3/+1
Even when the feature is not supported in guest CPUID, still set the msr to the default value which will be the only value KVM will accept in this case Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220223115824.319821-1-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-15i386: Add Icelake-Server-v6 CPU model with 5-level EPT supportVitaly Kuznetsov1-0/+8
Windows 11 with WSL2 enabled (Hyper-V) fails to boot with Icelake-Server {-v5} CPU model but boots well with '-cpu host'. Apparently, it expects 5-level paging and 5-level EPT support to come in pair but QEMU's Icelake-Server CPU model lacks the later. Introduce 'Icelake-Server-v6' CPU model with 'vmx-page-walk-5' enabled by default. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220221145316.576138-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-15x86: Add AMX CPUIDs enumerationJing Liu1-3/+52
Add AMX primary feature bits XFD and AMX_TILE to enumerate the CPU's AMX capability. Meanwhile, add AMX TILE and TMUL CPUID leaf and subleaves which exist when AMX TILE is present to provide the maximum capability of TILE and TMUL. Signed-off-by: Jing Liu <jing2.liu@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20220217060434.52460-6-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-15x86: Add XFD faulting bit for state componentsJing Liu1-1/+2
Intel introduces XFD faulting mechanism for extended XSAVE features to dynamically enable the features in runtime. If CPUID (EAX=0Dh, ECX=n, n>1).ECX[2] is set as 1, it indicates support for XFD faulting of this state component. Signed-off-by: Jing Liu <jing2.liu@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20220217060434.52460-5-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-15x86: Grant AMX permission for guestYang Zhong1-0/+7
Kernel allocates 4K xstate buffer by default. For XSAVE features which require large state component (e.g. AMX), Linux kernel dynamically expands the xstate buffer only after the process has acquired the necessary permissions. Those are called dynamically- enabled XSAVE features (or dynamic xfeatures). There are separate permissions for native tasks and guests. Qemu should request the guest permissions for dynamic xfeatures which will be exposed to the guest. This only needs to be done once before the first vcpu is created. KVM implemented one new ARCH_GET_XCOMP_SUPP system attribute API to get host side supported_xcr0 and Qemu can decide if it can request dynamically enabled XSAVE features permission. https://lore.kernel.org/all/20220126152210.3044876-1-pbonzini@redhat.com/ Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Jing Liu <jing2.liu@intel.com> Message-Id: <20220217060434.52460-4-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-15x86: Add AMX XTILECFG and XTILEDATA componentsJing Liu1-0/+8
The AMX TILECFG register and the TMMx tile data registers are saved/restored via XSAVE, respectively in state component 17 (64 bytes) and state component 18 (8192 bytes). Add AMX feature bits to x86_ext_save_areas array to set up AMX components. Add structs that define the layout of AMX XSAVE areas and use QEMU_BUILD_BUG_ON to validate the structs sizes. Signed-off-by: Jing Liu <jing2.liu@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20220217060434.52460-3-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-15x86: Fix the 64-byte boundary enumeration for extended stateJing Liu1-0/+1
The extended state subleaves (EAX=0Dh, ECX=n, n>1).ECX[1] indicate whether the extended state component locates on the next 64-byte boundary following the preceding state component when the compacted format of an XSAVE area is used. Right now, they are all zero because no supported component needed the bit to be set, but the upcoming AMX feature will use it. Fix the subleaves value according to KVM's supported cpuid. Signed-off-by: Jing Liu <jing2.liu@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20220217060434.52460-2-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-21Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell1-1/+1
staging * More Meson conversions (0.59.x now required rather than suggested) * UMIP support for TCG x86 * Fix migration crash * Restore error output for check-block # gpg: Signature made Mon 21 Feb 2022 09:35:59 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (29 commits) configure, meson: move CONFIG_IASL to a Meson option meson, configure: move ntddscsi API check to meson meson: require dynamic linking for VSS support qga/vss-win32: require widl/midl, remove pre-built TLB file meson: do not make qga/vss-win32/meson.build conditional on C++ presence configure, meson: replace VSS SDK checks and options with --enable-vss-sdk qga/vss: use standard windows headers location qga/vss-win32: use widl if available meson: drop --with-win-sdk qga/vss-win32: fix midl arguments meson: refine check for whether to look for virglrenderer configure, meson: move guest-agent, tools to meson configure, meson: move smbd options to meson_options.txt configure, meson: move coroutine options to meson_options.txt configure, meson: move some default-disabled options to meson_options.txt meson: define qemu_cflags/qemu_ldflags configure, meson: move block layer options to meson_options.txt configure, meson: move image format options to meson_options.txt configure, meson: cleanup qemu-ga libraries configure, meson: move TPM check to meson ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-21include: Move hardware version declarations to new qemu/hw-version.hPeter Maydell1-0/+1
The "hardware version" machinery (qemu_set_hw_version(), qemu_hw_version(), and the QEMU_HW_VERSION define) is used by fewer than 10 files. Move it out from osdep.h into a new qemu/hw-version.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220208200856.3558249-6-peter.maydell@linaro.org
2022-02-16target/i386: add TCG support for UMIPGareth Webb1-1/+1
Signed-off-by: Gareth Webb <gareth.webb@umbralsoftware.co.uk> Message-Id: <164425598317.21902.4257759159329756142-1@git.sr.ht> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-03Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingRichard Henderson1-0/+5
* Build system fixes and cleanups * DMA support in the multiboot option ROM * Rename default-bus-bypass-iommu * Deprecate -watchdog and cleanup -watchdog-action * HVF fix for <PAGE_SIZE regions * Support TSC scaling for AMD nested virtualization * Fix for ESP fuzzing bug # gpg: Signature made Tue 02 Nov 2021 10:57:37 AM EDT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] * remotes/bonzini/tags/for-upstream: (27 commits) configure: fix --audio-drv-list help message configure: Remove the check for the __thread keyword Move the l2tpv3 test from configure to meson.build meson: remove unnecessary coreaudio test program meson: remove pointless warnings meson.build: Allow to disable OSS again meson: bump submodule to 0.59.3 qtest/am53c974-test: add test for cancelling in-flight requests esp: ensure in-flight SCSI requests are always cancelled KVM: SVM: add migration support for nested TSC scaling hw/i386: fix vmmouse registration watchdog: remove select_watchdog_action vl: deprecate -watchdog watchdog: add information from -watchdog help to -device help hw/i386: Rename default_bus_bypass_iommu hvf: Avoid mapping regions < PAGE_SIZE as ram configure: do not duplicate CPU_CFLAGS into QEMU_LDFLAGS configure: remove useless NPTL probe target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types optionrom: add a DMA-enabled multiboot ROM ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-11-02KVM: SVM: add migration support for nested TSC scalingMaxim Levitsky1-0/+5
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20211101132300.192584-4-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-31monitor: Trim some trailing space from human-readable outputMarkus Armbruster1-1/+1
I noticed -cpu help printing enough trailing spaces to make the output at least 84 characters wide. Looks ugly unless the terminal is wider. Ugly or not, trailing spaces are stupid. The culprit is this line in x86_cpu_list_entry(): qemu_printf("x86 %-20s %-58s\n", name, desc); This prints a string with minimum field left-justified right before a newline. Change it to qemu_printf("x86 %-20s %s\n", name, desc); which avoids the trailing spaces and is simpler to boot. A search for the pattern with "git-grep -E '%-[0-9]+s\\n'" found a few more instances. Change them similarly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20211009152401.2982862-1-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-29target/i386: Remove core-capability in Snowridge CPU modelChenyi Qiang1-1/+2
Because core-capability releated features are model-specific and KVM won't support it, remove the core-capability in CPU model to avoid the warning message. Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Message-Id: <20210827064818.4698-3-chenyi.qiang@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2021-10-13target/i386/sev: Remove stubs by using code elisionPhilippe Mathieu-Daudé1-6/+7
Only declare sev_enabled() and sev_es_enabled() when CONFIG_SEV is set, to allow the compiler to elide unused code. Remove unnecessary stubs. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20211007161716.453984-17-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-13target/i386/sev: Rename sev_i386.h -> sev.hPhilippe Mathieu-Daudé1-1/+1
SEV is a x86 specific feature, and the "sev_i386.h" header is already in target/i386/. Rename it as "sev.h" to simplify. Patch created mechanically using: $ git mv target/i386/sev_i386.h target/i386/sev.h $ sed -i s/sev_i386.h/sev.h/ $(git grep -l sev_i386.h) Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20211007161716.453984-15-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-13target/i386/cpu: Add missing 'qapi/error.h' headerPhilippe Mathieu-Daudé1-0/+1
Commit 00b81053244 ("target-i386: Remove assert_no_error usage") forgot to add the "qapi/error.h" for &error_abort, add it now. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Connor Kuehl <ckuehl@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211007161716.453984-8-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01i386: Change the default Hyper-V version to match WS2016Vitaly Kuznetsov1-3/+3
KVM implements some Hyper-V 2016 functions so providing WS2008R2 version is somewhat incorrect. While generally guests shouldn't care about it and always check feature bits, it is known that some tools in Windows actually check version info. For compatibility reasons make the change for 6.2 machine types only. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210902093530.345756-9-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01i386: Make Hyper-V version id configurableVitaly Kuznetsov1-4/+11
Currently, we hardcode Hyper-V version id (CPUID 0x40000002) to WS2008R2 and it is known that certain tools in Windows check this. It seems useful to provide some flexibility by making it possible to change this info at will. CPUID information is defined in TLFS as: EAX: Build Number EBX Bits 31-16: Major Version Bits 15-0: Minor Version ECX Service Pack EDX Bits 31-24: Service Branch Bits 23-0: Service Number Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210902093530.345756-8-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01i386: Implement pseudo 'hv-avic' ('hv-apicv') enlightenmentVitaly Kuznetsov1-0/+4
The enlightenment allows to use Hyper-V SynIC with hardware APICv/AVIC enabled. Normally, Hyper-V SynIC disables these hardware features and suggests the guest to use paravirtualized AutoEOI feature. Linux-4.15 gains support for conditional APICv/AVIC disablement, the feature stays on until the guest tries to use AutoEOI feature with SynIC. With 'HV_DEPRECATING_AEOI_RECOMMENDED' bit exposed, modern enough Windows/ Hyper-V versions should follow the recommendation and not use the (unwanted) feature. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210902093530.345756-7-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01i386: Support KVM_CAP_HYPERV_ENFORCE_CPUIDVitaly Kuznetsov1-0/+1
By default, KVM allows the guest to use all currently supported Hyper-V enlightenments when Hyper-V CPUID interface was exposed, regardless of if some features were not announced in guest visible CPUIDs. hv-enforce-cpuid feature alters this behavior and only allows the guest to use exposed Hyper-V enlightenments. The feature is supported by Linux >= 5.14 and is not enabled by default in QEMU. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210902093530.345756-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01i386: Support KVM_CAP_ENFORCE_PV_FEATURE_CPUIDVitaly Kuznetsov1-0/+2
By default, KVM allows the guest to use all currently supported PV features even when they were not announced in guest visible CPUIDs. Introduce a new "kvm-pv-enforce-cpuid" flag to limit the supported feature set to the exposed features. The feature is supported by Linux >= 5.10 and is not enabled by default in QEMU. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210902093530.345756-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30Adjust min CPUID level to 0x12 when SGX is enabledSean Christopherson1-0/+5
SGX capabilities are enumerated through CPUID_0x12. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20210719112136.57018-16-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30i386: kvm: Add support for exposing PROVISIONKEY to guestSean Christopherson1-1/+4
If the guest want to fully use SGX, the guest needs to be able to access provisioning key. Add a new KVM_CAP_SGX_ATTRIBUTE to KVM to support provisioning key to KVM guests. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20210719112136.57018-14-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30i386: Update SGX CPUID info according to hardware/KVM/user inputSean Christopherson1-0/+77
Expose SGX to the guest if and only if KVM is enabled and supports virtualization of SGX. While the majority of ENCLS can be emulated to some degree, because SGX uses a hardware-based root of trust, the attestation aspects of SGX cannot be emulated in software, i.e. ultimately emulation will fail as software cannot generate a valid quote/report. The complexity of partially emulating SGX in Qemu far outweighs the value added, e.g. an SGX specific simulator for userspace applications can emulate SGX for development and testing purposes. Note, access to the PROVISIONKEY is not yet advertised to the guest as KVM blocks access to the PROVISIONKEY by default and requires userspace to provide additional credentials (via ioctl()) to expose PROVISIONKEY. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20210719112136.57018-13-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30i386: Add get/set/migrate support for SGX_LEPUBKEYHASH MSRsSean Christopherson1-1/+15
On real hardware, on systems that supports SGX Launch Control, those MSRs are initialized to digest of Intel's signing key; on systems that don't support SGX Launch Control, those MSRs are not available but hardware always uses digest of Intel's signing key in EINIT. KVM advertises SGX LC via CPUID if and only if the MSRs are writable. Unconditionally initialize those MSRs to digest of Intel's signing key when CPU is realized and reset to reflect the fact. This avoids potential bug in case kvm_arch_put_registers() is called before kvm_arch_get_registers() is called, in which case guest's virtual SGX_LEPUBKEYHASH MSRs will be set to 0, although KVM initializes those to digest of Intel's signing key by default, since KVM allows those MSRs to be updated by Qemu to support live migration. Save/restore the SGX Launch Enclave Public Key Hash MSRs if SGX Launch Control (LC) is exposed to the guest. Likewise, migrate the MSRs if they are writable by the guest. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20210719112136.57018-11-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30i386: Add SGX CPUID leaf FEAT_SGX_12_1_EAXSean Christopherson1-0/+21
CPUID leaf 12_1_EAX is an Intel-defined feature bits leaf enumerating the platform's SGX capabilities that may be utilized by an enclave, e.g. whether or not an enclave can gain access to the provision key. Currently there are six capabilities: - INIT: set when the enclave has has been initialized by EINIT. Cannot be set by software, i.e. forced to zero in CPUID. - DEBUG: permits a debugger to read/write into the enclave. - MODE64BIT: the enclave runs in 64-bit mode - PROVISIONKEY: grants has access to the provision key - EINITTOKENKEY: grants access to the EINIT token key, i.e. the enclave can generate EINIT tokens - KSS: Key Separation and Sharing enabled for the enclave. Note that the entirety of CPUID.0x12.0x1, i.e. all registers, enumerates the allowed ATTRIBUTES (128 bits), but only bits 31:0 are directly exposed to the user (via FEAT_12_1_EAX). Bits 63:32 are currently all reserved and bits 127:64 correspond to the allowed XSAVE Feature Request Mask, which is calculated based on other CPU features, e.g. XSAVE, MPX, AVX, etc... and is not exposed to the user. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20210719112136.57018-10-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30i386: Add SGX CPUID leaf FEAT_SGX_12_0_EBXSean Christopherson1-0/+21
CPUID leaf 12_0_EBX is an Intel-defined feature bits leaf enumerating the platform's SGX extended capabilities. Currently there is a single capabilitiy: - EXINFO: record information about #PFs and #GPs in the enclave's SSA Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20210719112136.57018-9-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30i386: Add SGX CPUID leaf FEAT_SGX_12_0_EAXSean Christopherson1-0/+20
CPUID leaf 12_0_EAX is an Intel-defined feature bits leaf enumerating the CPU's SGX capabilities, e.g. supported SGX instruction sets. Currently there are four enumerated capabilities: - SGX1 instruction set, i.e. "base" SGX - SGX2 instruction set for dynamic EPC management - ENCLV instruction set for VMM oversubscription of EPC - ENCLS-C instruction set for thread safe variants of ENCLS Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20210719112136.57018-8-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30i386: Add primary SGX CPUID and MSR definesSean Christopherson1-2/+2
Add CPUID defines for SGX and SGX Launch Control (LC), as well as defines for their associated FEATURE_CONTROL MSR bits. Define the Launch Enclave Public Key Hash MSRs (LE Hash MSRs), which exist when SGX LC is present (in CPUID), and are writable when SGX LC is enabled (in FEATURE_CONTROL). Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20210719112136.57018-7-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-13target/i386: Added VGIF V_IRQ masking capabilityLara Lazier1-2/+5
VGIF provides masking capability for when virtual interrupts are taken. (APM2) Signed-off-by: Lara Lazier <laramglazier@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-13target/i386: Moved int_ctl into CPUX86State structureLara Lazier1-1/+1
Moved int_ctl into the CPUX86State structure. It removes some unnecessary stores and loads, and prepares for tracking the vIRQ state even when it is masked due to vGIF. Signed-off-by: Lara Lazier <laramglazier@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-13target/i386: Added VGIF featureLara Lazier1-1/+2
VGIF allows STGI and CLGI to execute in guest mode and control virtual interrupts in guest mode. When the VGIF feature is enabled then: * executing STGI in the guest sets bit 9 of the VMCB offset 60h. * executing CLGI in the guest clears bit 9 of the VMCB offset 60h. Signed-off-by: Lara Lazier <laramglazier@gmail.com> Message-Id: <20210730070742.9674-1-laramglazier@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-13target/i386: VMRUN and VMLOAD canonicalizationsLara Lazier1-8/+11
APM2 requires that VMRUN and VMLOAD canonicalize (sign extend to 63 from 48/57) all base addresses in the segment registers that have been respectively loaded. Signed-off-by: Lara Lazier <laramglazier@gmail.com> Message-Id: <20210804113058.45186-1-laramglazier@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-25i386/cpu: Remove AVX_VNNI feature from Cooperlake cpu modelYang Zhong1-1/+1
The AVX_VNNI feature is not in Cooperlake platform, remove it from cpu model. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20210820054611.84303-1-yang.zhong@intel.com> Fixes: c1826ea6a052 ("i386/cpu: Expose AVX_VNNI instruction to guest") Cc: qemu-stable@nongnu.org Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2021-08-25target/i386: Remove split lock detect in Snowridge CPU modelChenyi Qiang1-0/+8
At present, there's no mechanism intelligent enough to virtualize split lock detection correctly. Remove it in Snowridge CPU model to avoid the feature exposure. Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Message-Id: <20210630012053.10098-1-chenyi.qiang@intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2021-07-27docs: Update path that mentions deprecated.rstMao Zhongyi1-1/+1
Missed in commit f3478392 "docs: Move deprecation, build and license info out of system/" Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210723065828.1336760-1-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-23i386: do not call cpudef-only models functions for max, host, baseClaudio Fontana1-2/+17
Some cpu properties have to be set only for cpu models in builtin_x86_defs, registered with x86_register_cpu_model_type, and not for cpu models "base", "max", and the subclass "host". These properties are the ones set by function x86_cpu_apply_props, (also including kvm_default_props, tcg_default_props), and the "vendor" property for the KVM and HVF accelerators. After recent refactoring of cpu, which also affected these properties, they were instead set unconditionally for all x86 cpus. This has been detected as a bug with Nested on AMD with cpu "host", as svm was not turned on by default, due to the wrongful setting of kvm_default_props via x86_cpu_apply_props, which set svm to "off". Rectify the bug introduced in commit "i386: split cpu accelerators" and document the functions that are builtin_x86_defs-only. Signed-off-by: Claudio Fontana <cfontana@suse.de> Tested-by: Alexander Bulekov <alxndr@bu.edu> Fixes: f5cc5a5c ("i386: split cpu accelerators from cpu.c,"...) Resolves: https://gitlab.com/qemu-project/qemu/-/issues/477 Message-Id: <20210723112921.12637-1-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-13target/i386: Fix cpuid level for AMDzhenwei pi1-2/+9
A AMD server typically has cpuid level 0x10(test on Rome/Milan), it should not be changed to 0x1f in multi-dies case. * to maintain compatibility with older machine types, only implement this change when the CPU's "x-vendor-cpuid-only" property is false Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: zhenwei pi <pizhenwei@bytedance.com> Fixes: a94e1428991 (target/i386: Add CPUID.1F generation support for multi-dies PCMachine) Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Message-Id: <20210708170641.49410-1-michael.roth@amd.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2021-07-13target/i386: suppress CPUID leaves not defined by the CPU vendorMichael Roth1-0/+6
Currently all built-in CPUs report cache information via CPUID leaves 2 and 4, but these have never been defined for AMD. In the case of SEV-SNP this can cause issues with CPUID enforcement. Address this by allowing CPU types to suppress these via a new "x-vendor-cpuid-only" CPU property, which is true by default, but switched off for older machine types to maintain compatibility. Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: zhenwei pi <pizhenwei@bytedance.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Message-Id: <20210708003623.18665-1-michael.roth@amd.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2021-07-13i386: expand Hyper-V features during CPU feature expansion timeVitaly Kuznetsov1-0/+4
To make Hyper-V features appear in e.g. QMP query-cpu-model-expansion we need to expand and set the corresponding CPUID leaves early. Modify x86_cpu_get_supported_feature_word() to call newly intoduced Hyper-V specific kvm_hv_get_supported_cpuid() instead of kvm_arch_get_supported_cpuid(). We can't use kvm_arch_get_supported_cpuid() as Hyper-V specific CPUID leaves intersect with KVM's. Note, early expansion will only happen when KVM supports system wide KVM_GET_SUPPORTED_HV_CPUID ioctl (KVM_CAP_SYS_HYPERV_CPUID). Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210608120817.1325125-6-vkuznets@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2021-07-06target/i386: Populate x86_ext_save_areas offsets using cpuid where possibleDavid Edmondson1-12/+1
Rather than relying on the X86XSaveArea structure definition, determine the offset of XSAVE state areas using CPUID leaf 0xd where possible (KVM and HVF). Signed-off-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20210705104632.2902400-8-david.edmondson@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-06target/i386: Make x86_ext_save_areas visible outside cpu.cDavid Edmondson1-6/+1
Provide visibility of the x86_ext_save_areas array and associated type outside of cpu.c. Signed-off-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20210705104632.2902400-6-david.edmondson@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25target/i386: kvm: add support for TSC scalingPaolo Bonzini1-1/+1
Linux 5.14 will add support for nested TSC scaling. Add the corresponding feature in QEMU; to keep support for existing kernels, do not add it to any processor yet. The handling of the VMCS enumeration MSR is ugly; once we have more than one case, we may want to add a table to check VMX features against. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-04i386: run accel_cpu_instance_init as post_initClaudio Fontana1-3/+7
This fixes host and max cpu initialization, by running the accel cpu initialization only after all instance init functions are called for all X86 cpu subclasses. The bug this is fixing is related to the "max" and "host" i386 cpu subclasses, which set cpu->max_features, which is then used at cpu realization time. In order to properly split the accel-specific max features code that needs to be executed at cpu instance initialization time, we cannot call the accel cpu initialization at the end of the x86 base class initialization, or we will have no way to specialize "max features" cpu behavior, overriding the "max" cpu class defaults, and checking for the "max features" flag itself. This patch moves the accel-specific cpu instance initialization to after all x86 cpu instance code has been executed, including subclasses, so that proper initialization of cpu "host" and "max" can be restored. Fixes: f5cc5a5c ("i386: split cpu accelerators from cpu.c,"...) Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Claudio Fontana <cfontana@suse.de> Message-Id: <20210603123001.17843-3-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-04i386: reorder call to cpu_exec_realizefnClaudio Fontana1-28/+51
i386 realizefn code is sensitive to ordering, and recent commits aimed at refactoring it, splitting accelerator-specific code, broke assumptions which need to be fixed. We need to: * process hyper-v enlightements first, as they assume features not to be expanded * only then, expand features * after expanding features, attempt to check them and modify them in the accel-specific realizefn code called by cpu_exec_realizefn(). * after the framework has been called via cpu_exec_realizefn, the code can check for what has or hasn't been set by accel-specific code, or extend its results, ie: - check and evenually set code_urev default - modify cpu->mwait after potentially being set from host CPUID. - finally check for phys_bits assuming all user and accel-specific adjustments have already been taken into account. Fixes: f5cc5a5c ("i386: split cpu accelerators from cpu.c"...) Fixes: 30565f10 ("cpu: call AccelCPUClass::cpu_realizefn in"...) Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Claudio Fontana <cfontana@suse.de> Message-Id: <20210603123001.17843-2-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-18 11:01:51 +0000