aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)AuthorFilesLines
2023-01-05i.MX7D: Connect IRQs to GPIO devices.Jean-Christophe Dubois1-1/+30
IRQs were not associated to the various GPIO devices inside i.MX7D. This patch brings the i.MX7D on par with i.MX6. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 20221226101418.415170-1-jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05i.MX6UL: Add a specific GPT timer instance for the i.MX6ULJean-Christophe Dubois1-1/+1
The i.MX6UL doesn't support CLK_HIGH ou CLK_HIGH_DIV clock source. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05i.MX7D: Connect GPT timers to IRQJean-Christophe Dubois1-0/+10
So far the GPT timers were unable to raise IRQs to the processor. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/arm/smmu-common: Avoid using inlined functions with external linkagePhilippe Mathieu-Daudé1-7/+6
When using Clang ("Apple clang version 14.0.0 (clang-1400.0.29.202)") and building with -Wall we get: hw/arm/smmu-common.c:173:33: warning: static function 'smmu_hash_remove_by_asid_iova' is used in an inline function with external linkage [-Wstatic-in-inline] hw/arm/smmu-common.h:170:1: note: use 'static' to give inline function 'smmu_iotlb_inv_iova' internal linkage void smmu_iotlb_inv_iova(SMMUState *s, int asid, dma_addr_t iova, ^ static None of our code base require / use inlined functions with external linkage. Some places use internal inlining in the hot path. These two functions are certainly not in any hot path and don't justify any inlining, so these are likely oversights rather than intentional. Reported-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221216214924.4711-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scopePhilippe Mathieu-Daudé1-1/+1
This function is not used anywhere outside this file, so we can make the function "static void". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221216214924.4711-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/arm/nseries: Silent -Wmissing-field-initializers warningPhilippe Mathieu-Daudé1-6/+4
Silent when compiling with -Wextra: ../hw/arm/nseries.c:1081:12: warning: missing field 'line' initializer [-Wmissing-field-initializers] { NULL } ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221220142520.24094-4-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/arm/nseries: Constify various read-only arraysPhilippe Mathieu-Daudé1-9/+9
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221220142520.24094-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-21hw: Add compat machines for 8.0Cornelia Huck1-1/+8
Add 8.0 machine types for arm/i440fx/m68k/q35/s390x/spapr. Reviewed-by: Cédric Le Goater <clg@kaod.org> [ppc] Reviewed-by: Thomas Huth <thuth@redhat.com> [s390x] Reviewed-by: Greg Kurz <groug@kaod.org> [ppc] Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20221212152145.124317-2-cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2022-12-15Merge tag 'pull-target-arm-20221215-1' of ↵Peter Maydell4-47/+184
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue:  * hw/arm/virt: Add properties to allow more granular configuration of use of highmem space  * target/arm: Add Cortex-A55 CPU  * hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement  * Implement FEAT_EVT  * Some 3-phase-reset conversions for Arm GIC, SMMU  * hw/arm/boot: set initrd with #address-cells type in fdt  * hw/misc: Move some arm-related files from specific_ss into softmmu_ss  * Restrict arm_cpu_exec_interrupt() to TCG accelerator # gpg: Signature made Thu 15 Dec 2022 17:38:36 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20221215-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (28 commits) target/arm: Restrict arm_cpu_exec_interrupt() to TCG accelerator hw/misc: Move some arm-related files from specific_ss into softmmu_ss hw/arm/boot: set initrd with #address-cells type in fdt hw/intc: Convert TYPE_KVM_ARM_ITS to 3-phase reset hw/intc: Convert TYPE_ARM_GICV3_ITS to 3-phase reset hw/intc: Convert TYPE_ARM_GICV3_ITS_COMMON to 3-phase reset hw/intc: Convert TYPE_KVM_ARM_GICV3 to 3-phase reset hw/intc: Convert TYPE_ARM_GICV3_COMMON to 3-phase reset hw/intc: Convert TYPE_ARM_GIC_KVM to 3-phase reset hw/intc: Convert TYPE_ARM_GIC_COMMON to 3-phase reset hw/arm: Convert TYPE_ARM_SMMUV3 to 3-phase reset hw/arm: Convert TYPE_ARM_SMMU to 3-phase reset target/arm: Report FEAT_EVT for TCG '-cpu max' target/arm: Implement HCR_EL2.TID4 traps target/arm: Implement HCR_EL2.TICAB,TOCU traps target/arm: Implement HCR_EL2.TTLBOS traps target/arm: Implement HCR_EL2.TTLBIS traps target/arm: Allow relevant HCR bits to be written for FEAT_EVT hw/intc/arm_gicv3: Fix GICD_TYPER ITLinesNumber advertisement target/arm: Add Cortex-A55 CPU ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15hw/arm/boot: set initrd with #address-cells type in fdtSchspa Shi1-4/+6
We use 32bit value for linux,initrd-[start/end], when we have loader_start > 4GB, there will be a wrong initrd_start passed to the kernel, and the kernel will report the following warning. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] initrd not fully accessible via the linear mapping -- please check your bootloader ... [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/mm/init.c:355 arm64_memblock_init+0x158/0x244 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 6.1.0-rc3-13250-g30a0b95b1335-dirty #28 [ 0.000000] Hardware name: Horizon Sigi Virtual development board (DT) [ 0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.000000] pc : arm64_memblock_init+0x158/0x244 [ 0.000000] lr : arm64_memblock_init+0x158/0x244 [ 0.000000] sp : ffff800009273df0 [ 0.000000] x29: ffff800009273df0 x28: 0000001000cc0010 x27: 0000800000000000 [ 0.000000] x26: 000000000050a3e2 x25: ffff800008b46000 x24: ffff800008b46000 [ 0.000000] x23: ffff800008a53000 x22: ffff800009420000 x21: ffff800008a53000 [ 0.000000] x20: 0000000004000000 x19: 0000000004000000 x18: 00000000ffff1020 [ 0.000000] x17: 6568632065736165 x16: 6c70202d2d20676e x15: 697070616d207261 [ 0.000000] x14: 656e696c20656874 x13: 0a2e2e2e20726564 x12: 0000000000000000 [ 0.000000] x11: 0000000000000000 x10: 00000000ffffffff x9 : 0000000000000000 [ 0.000000] x8 : 0000000000000000 x7 : 796c6c756620746f x6 : 6e20647274696e69 [ 0.000000] x5 : ffff8000093c7c47 x4 : ffff800008a2102f x3 : ffff800009273a88 [ 0.000000] x2 : 80000000fffff038 x1 : 00000000000000c0 x0 : 0000000000000056 [ 0.000000] Call trace: [ 0.000000] arm64_memblock_init+0x158/0x244 [ 0.000000] setup_arch+0x164/0x1cc [ 0.000000] start_kernel+0x94/0x4ac [ 0.000000] __primary_switched+0xb4/0xbc [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000001000000000-0x0000001007ffffff] This doesn't affect any machine types we currently support, because for all of our machine types the RAM starts well below the 4GB mark, but it does demonstrate that we're not currently writing the device-tree properties quite as intended. To fix it, we can change it to write these values to the dtb using a type width matching #address-cells. This is the intended size for these dtb properties, and is how u-boot, for instance, writes them, although in practice the Linux kernel will cope with them being any width as long as they're big enough to fit the value. Signed-off-by: Schspa Shi <schspa@gmail.com> Message-id: 20221129160724.75667-1-schspa@gmail.com [PMM: tweaked commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15hw/arm: Convert TYPE_ARM_SMMUV3 to 3-phase resetPeter Maydell1-4/+8
Convert the TYPE_ARM_SMMUV3 device to 3-phase reset. The legacy reset method doesn't do anything that's invalid in the hold phase, so the conversion only requires changing it to a hold phase method, and using the 3-phase versions of the "save the parent reset method and chain to it" code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221109161444.3397405-3-peter.maydell@linaro.org
2022-12-15hw/arm: Convert TYPE_ARM_SMMU to 3-phase resetPeter Maydell1-3/+4
Convert the TYPE_ARM_SMMU device to 3-phase reset. The legacy method doesn't do anything that's invalid in the hold phase, so the conversion is simple and not a behaviour change. Note that we must convert this base class before we can convert the TYPE_ARM_SMMUV3 subclass -- transitional support in Resettable handles "chain to parent class reset" when the base class is 3-phase and the subclass is still using legacy reset, but not the other way around. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221109161444.3397405-2-peter.maydell@linaro.org
2022-12-15target/arm: Add Cortex-A55 CPUTimofey Kutergin1-0/+1
The Cortex-A55 is one of the newer armv8.2+ CPUs; in particular it supports the Privileged Access Never (PAN) feature. Add a model of this CPU, so you can use a CPU type on the virt board that models a specific real hardware CPU, rather than having to use the QEMU-specific "max" CPU type. Signed-off-by: Timofey Kutergin <tkutergin@gmail.com> Message-id: 20221121150819.2782817-1-tkutergin@gmail.com [PMM: tweaked commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15hw/arm/virt: build SMBIOS 19 tableMihai Carabas1-1/+7
Use the base_memmap to build the SMBIOS 19 table which provides the address mapping for a Physical Memory Array (from spec [1] chapter 7.20). This was present on i386 from commit c97294ec1b9e36887e119589d456557d72ab37b5 ("SMBIOS: Build aggregate smbios tables and entry point"). [1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.5.0.pdf The absence of this table is a breach of the specs and is detected by the FirmwareTestSuite (FWTS), but it doesn't cause any known problems for guest OSes. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Message-id: 1668789029-5432-1-git-send-email-mihai.carabas@oracle.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15hw/arm/virt: Add properties to disable high memory regionsGavin Shan1-2/+73
The 3 high memory regions are usually enabled by default, but they may be not used. For example, VIRT_HIGH_GIC_REDIST2 isn't needed by GICv2. This leads to waste in the PA space. Add properties ("highmem-redists", "highmem-ecam", "highmem-mmio") to allow users selectively disable them if needed. After that, the high memory region for GICv3 or GICv4 redistributor can be disabled by user, the number of maximal supported CPUs needs to be calculated based on 'vms->highmem_redists'. The follow-up error message is also improved to indicate if the high memory region for GICv3 and GICv4 has been enabled or not. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221029224307.138822-8-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15hw/arm/virt: Add 'compact-highmem' propertyGavin Shan1-0/+32
After the improvement to high memory region address assignment is applied, the memory layout can be changed, introducing possible migration breakage. For example, VIRT_HIGH_PCIE_MMIO memory region is disabled or enabled when the optimization is applied or not, with the following configuration. The configuration is only achievable by modifying the source code until more properties are added to allow users selectively disable those high memory regions. pa_bits = 40; vms->highmem_redists = false; vms->highmem_ecam = false; vms->highmem_mmio = true; # qemu-system-aarch64 -accel kvm -cpu host \ -machine virt-7.2,compact-highmem={on, off} \ -m 4G,maxmem=511G -monitor stdio Region compact-highmem=off compact-highmem=on ---------------------------------------------------------------- MEM [1GB 512GB] [1GB 512GB] HIGH_GIC_REDISTS2 [512GB 512GB+64MB] [disabled] HIGH_PCIE_ECAM [512GB+256MB 512GB+512MB] [disabled] HIGH_PCIE_MMIO [disabled] [512GB 1TB] In order to keep backwords compatibility, we need to disable the optimization on machine, which is virt-7.1 or ealier than it. It means the optimization is enabled by default from virt-7.2. Besides, 'compact-highmem' property is added so that the optimization can be explicitly enabled or disabled on all machine types by users. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Tested-by: Zhenyu Zhang <zhenyzha@redhat.com> Message-id: 20221029224307.138822-7-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15hw/arm/virt: Improve high memory region address assignmentGavin Shan1-5/+10
There are three high memory regions, which are VIRT_HIGH_REDIST2, VIRT_HIGH_PCIE_ECAM and VIRT_HIGH_PCIE_MMIO. Their base addresses are floating on highest RAM address. However, they can be disabled in several cases. (1) One specific high memory region is likely to be disabled by code by toggling vms->highmem_{redists, ecam, mmio}. (2) VIRT_HIGH_PCIE_ECAM region is disabled on machine, which is 'virt-2.12' or ealier than it. (3) VIRT_HIGH_PCIE_ECAM region is disabled when firmware is loaded on 32-bits system. (4) One specific high memory region is disabled when it breaks the PA space limit. The current implementation of virt_set_{memmap, high_memmap}() isn't optimized because the high memory region's PA space is always reserved, regardless of whatever the actual state in the corresponding vms->highmem_{redists, ecam, mmio} flag. In the code, 'base' and 'vms->highest_gpa' are always increased for case (1), (2) and (3). It's unnecessary since the assigned PA space for the disabled high memory region won't be used afterwards. Improve the address assignment for those three high memory region by skipping the address assignment for one specific high memory region if it has been disabled in case (1), (2) and (3). The memory layout may be changed after the improvement is applied, which leads to potential migration breakage. So 'vms->highmem_compact' is added to control if the improvement should be applied. For now, 'vms->highmem_compact' is set to false, meaning that we don't have memory layout change until it becomes configurable through property 'compact-highmem' in next patch. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Tested-by: Zhenyu Zhang <zhenyzha@redhat.com> Message-id: 20221029224307.138822-6-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15hw/arm/virt: Introduce virt_get_high_memmap_enabled() helperGavin Shan1-13/+19
This introduces virt_get_high_memmap_enabled() helper, which returns the pointer to vms->highmem_{redists, ecam, mmio}. The pointer will be used in the subsequent patches. No functional change intended. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Tested-by: Zhenyu Zhang <zhenyzha@redhat.com> Message-id: 20221029224307.138822-5-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15hw/arm/virt: Introduce variable region_base in virt_set_high_memmap()Gavin Shan1-6/+6
This introduces variable 'region_base' for the base address of the specific high memory region. It's the preparatory work to optimize high memory region address assignment. No functional change intended. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Tested-by: Zhenyu Zhang <zhenyzha@redhat.com> Message-id: 20221029224307.138822-4-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15hw/arm/virt: Rename variable size to region_size in virt_set_high_memmap()Gavin Shan1-7/+8
This renames variable 'size' to 'region_size' in virt_set_high_memmap(). Its counterpart ('region_base') will be introduced in next patch. No functional change intended. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Tested-by: Zhenyu Zhang <zhenyzha@redhat.com> Message-id: 20221029224307.138822-3-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15hw/arm/virt: Introduce virt_set_high_memmap() helperGavin Shan1-33/+41
This introduces virt_set_high_memmap() helper. The logic of high memory region address assignment is moved to the helper. The intention is to make the subsequent optimization for high memory region address assignment easier. No functional change intended. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Tested-by: Zhenyu Zhang <zhenyzha@redhat.com> Message-id: 20221029224307.138822-2-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-14error: Move ERRP_GUARD() to the beginning of the functionMarkus Armbruster1-2/+1
include/qapi/error.h advises to put ERRP_GUARD() right at the beginning of the function, because only then can it guard the whole function. Clean up the few spots disregarding the advice. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221121085054.683122-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-12-14error: Drop some obviously superfluous error_propagate()Markus Armbruster1-9/+5
When error_propagate(errp, local_err) is the only reader of @local_err, we can just as well change its writers to write @errp directly, and drop the error_propagate() along with @local_err. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221121085054.683122-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-11-07Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Stefan Hajnoczi2-14/+20
into staging pci,pc,virtio: features, tests, fixes, cleanups lots of acpi rework first version of biosbits infrastructure ASID support in vhost-vdpa core_count2 support in smbios PCIe DOE emulation virtio vq reset HMAT support part of infrastructure for viommu support in vhost-vdpa VTD PASID support fixes, tests all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut # uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s # 5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X # Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur # 6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU # EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo= # =zTCn # -----END PGP SIGNATURE----- # gpg: Signature made Mon 07 Nov 2022 14:27:53 EST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (83 commits) checkpatch: better pattern for inline comments hw/virtio: introduce virtio_device_should_start tests/acpi: update tables for new core count test bios-tables-test: add test for number of cores > 255 tests/acpi: allow changes for core_count2 test bios-tables-test: teach test to use smbios 3.0 tables hw/smbios: add core_count2 to smbios table type 4 vhost-user: Support vhost_dev_start vhost: Change the sequence of device start intel-iommu: PASID support intel-iommu: convert VTD_PE_GET_FPD_ERR() to be a function intel-iommu: drop VTDBus intel-iommu: don't warn guest errors when getting rid2pasid entry vfio: move implement of vfio_get_xlat_addr() to memory.c tests: virt: Update expected *.acpihmatvirt tables tests: acpi: aarch64/virt: add a test for hmat nodes with no initiators hw/arm/virt: Enable HMAT on arm virt machine tests: Add HMAT AArch64/virt empty table files tests: acpi: q35: update expected blobs *.hmat-noinitiators expected HMAT: tests: acpi: q35: add test for hmat nodes without initiators ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-11-07hw/arm/virt: Enable HMAT on arm virt machineXiang Chen2-0/+8
Since the patchset ("Build ACPI Heterogeneous Memory Attribute Table (HMAT)"), HMAT is supported, but only x86 is enabled. Enable HMAT on arm virt machine. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20221027100037.251-7-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07acpi: arm/virt: madt: bump to revision 4 accordingly to ACPI 6.0 Errata AMiguel Luis1-9/+7
MADT has been updated with the GIC Structures from ACPI 6.0 Errata A and so MADT revision and GICC Structure must be updated also. Fixes: 37f33084ed2e ("acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table") Signed-off-by: Miguel Luis <miguel.luis@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20221011181730.10885-4-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07acpi: fadt: support revision 6.0 of the ACPI specificationMiguel Luis1-5/+5
Update the Fixed ACPI Description Table (FADT) to revision 6.0 of the ACPI specification adding the field "Hypervisor Vendor Identity". This field's description states the following: "64-bit identifier of hypervisor vendor. All bytes in this field are considered part of the vendor identity. These identifiers are defined independently by the vendors themselves, usually following the name of the hypervisor product. Version information should NOT be included in this field - this shall simply denote the vendor's name or identifier. Version information can be communicated through a supplemental vendor-specific hypervisor API. Firmware implementers would place zero bytes into this field, denoting that no hypervisor is present in the actual firmware." Signed-off-by: Miguel Luis <miguel.luis@oracle.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20221011181730.10885-3-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-04hw/arm/boot: Set SCR_EL3.HXEn when booting kernelPeter Maydell1-0/+3
When we direct boot a kernel on a CPU which emulates EL3, we need to set up the EL3 system registers as the Linux kernel documentation specifies: https://www.kernel.org/doc/Documentation/arm64/booting.rst For CPUs with FEAT_HCX support this includes: - SCR_EL3.HXEn (bit 38) must be initialised to 0b1. but we forgot to do this when implementing FEAT_HCX, which would mean that a guest trying to access the HCRX_EL2 register would crash. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221027140207.413084-3-peter.maydell@linaro.org
2022-11-04hw/arm/boot: Set SME and SVE EL3 vector lengths when booting kernelPeter Maydell1-0/+2
When we direct boot a kernel on a CPU which emulates EL3, we need to set up the EL3 system registers as the Linux kernel documentation specifies: https://www.kernel.org/doc/Documentation/arm64/booting.rst For SVE and SME this includes: - ZCR_EL3.LEN must be initialised to the same value for all CPUs the kernel is executed on. - SMCR_EL3.LEN must be initialised to the same value for all CPUs the kernel will execute on. Although we are technically compliant with this, the "same value" we currently use by default is the reset value of 0. This will end up forcing the guest kernel's SVE and SME vector length to be only the smallest supported length. Initialize the vector length fields to their maximum possible value, which is 0xf. If the implementation doesn't actually support that vector length then the effective vector length will be constrained down to the maximum supported value at point of use. This allows the guest to use all the vector lengths the emulated CPU supports (by programming the _EL2 and _EL1 versions of these registers.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221027140207.413084-2-peter.maydell@linaro.org
2022-10-27arm: re-randomize rng-seed on rebootJason A. Donenfeld1-0/+2
When the system reboots, the rng-seed that the FDT has should be re-randomized, so that the new boot gets a new seed. Since the FDT is in the ROM region at this point, we add a hook right after the ROM has been added, so that we have a pointer to that copy of the FDT. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Message-id: 20221025004327.568476-5-Jason@zx2c4.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-10-27reset: allow registering handlers that aren't called by snapshot loadingJason A. Donenfeld2-4/+4
Snapshot loading only expects to call deterministic handlers, not non-deterministic ones. So introduce a way of registering handlers that won't be called when reseting for snapshots. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Message-id: 20221025004327.568476-2-Jason@zx2c4.com [PMM: updated json doc comment with Markus' text; fixed checkpatch style nit] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-10-27hw/arm/virt: Fix devicetree warnings about the virtio-iommu nodeJean-Philippe Brucker1-2/+3
The "PCI Bus Binding to: IEEE Std 1275-1994" defines the compatible string for a PCIe bus or endpoint as "pci<vendorid>,<deviceid>" or similar. Since the initial binding for PCI virtio-iommu didn't follow this rule, it was modified to accept both strings and ensure backward compatibility. Also, the unit-name for the node should be "device,function". Fix corresponding dt-validate and dtc warnings: pcie@10000000: virtio_iommu@16:compatible: ['virtio,pci-iommu'] does not contain items matching the given schema pcie@10000000: Unevaluated properties are not allowed (... 'virtio_iommu@16' were unexpected) From schema: linux/Documentation/devicetree/bindings/pci/host-generic-pci.yaml virtio_iommu@16: compatible: 'oneOf' conditional failed, one must be fixed: ['virtio,pci-iommu'] is too short 'pci1af4,1057' was expected From schema: dtschema/schemas/pci/pci-bus.yaml Warning (pci_device_reg): /pcie@10000000/virtio_iommu@16: PCI unit address format error, expected "2,0" Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-10-26Merge tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu into ↵Stefan Hajnoczi2-4/+13
staging aspeed queue : * Performance improvement with Object class caching * Serial Flash Discovery Parameters support for m25p80 device * Various small adjustments on intructions and models # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmNX/WEACgkQUaNDx8/7 # 7KFhERAAhrcLcv15ny8RwatHPjzU00ZPQ0PcxGj1VDT66pCVh6M+rIeRPB2scOey # Pu8jUvIYJ8w7ozjAP6YTQ1MP/WufniVi91Bx+vs/okSiWZa4dP0/G7NQWoc1at0s # NBlkg57l1GMEeQb5x8vC1DizTQ1Z8Q8J/Ur3uXukXCmYVJAwHYpl/Foob1IPFgh8 # UcJ55LyuRq99lS8ib6HvRftAsC3DOcA/sl3b/TYR2+iKyi1VS2aZoQzxVCavSBcz # PoTonT9O4OvIQthAgXRwpylW/aMYU3I7FeyOMKlCNLbmJ8LpVbX2v0KN3WBvWBv4 # OWP0DiqPUuoWFHLUGKbiVOgWQrTQXZyoD70SD/ObE1oMTLmeBoD1oFizQDvokHAR # g2+gMdWnuWcbyaofY7YwuI6qz22gbrgh8JqX6sEWRDnY7HgCUvPhCsmci+bdN5cf # dGcE8YKi7aD5gzoU9LRziPlhbwaEsgYLpYS7aGfNcmypgeq6lmNG7xKyw911zCTY # uqDZWOUJy0tUIUTxoz3o1/KtsTFugjuZ+9W1SxELptJR37iwlP1vumf6bduwcx/3 # ba8tzNoXecXO5Icmq5P3lMNVM/abpkDDKS66HA87mABLEd/eCD0ojR9Kfxo0mD74 # kmQK3MFfJPkTu0ddu1cWhCIgTO7EuLuZL7gzj1oxoeXiU3YcVh8= # =u7pS # -----END PGP SIGNATURE----- # gpg: Signature made Tue 25 Oct 2022 11:14:41 EDT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu: arm/aspeed: Replace mx25l25635e chip model m25p80: Add the w25q01jvq SFPD table m25p80: Add the w25q512jv SFPD table m25p80: Add the w25q256 SFPD table m25p80: Add the mx66l1g45g SFDP table m25p80: Add the mx25l25635f SFPD table m25p80: Add the mx25l25635e SFPD table m25p80: Add erase size for mx25l25635e m25p80: Add the n25q256a SFDP table m25p80: Add basic support for the SFDP command hw/arm/aspeed: increase Bletchley memory size ast2600: Drop NEON from the CPU features aspeed/smc: Cache AspeedSMCClass ssi: cache SSIPeripheralClass to avoid GET_CLASS() tests/avocado/machine_aspeed.py: Fix typos on buildroot hw/i2c/aspeed: Fix old reg slave receive Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-24arm/aspeed: Replace mx25l25635e chip modelCédric Le Goater1-3/+3
A mx25l25635f chip model is generally found on these machines. It's newer and uses 4B opcodes which is better to exercise the support in the Linux kernel. Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-Id: <20220722063602.128144-9-clg@kaod.org> Message-Id: <20221013161241.2805140-11-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-10-24hw/arm/aspeed: increase Bletchley memory sizePatrick Williams1-1/+8
For the PVT-class hardware we have increased the memory size of this device to 2 GiB. Adjust the device model accordingly. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20221007110529.3657749-1-patrick@stwcx.xyz> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-10-24ast2600: Drop NEON from the CPU featuresCédric Le Goater1-0/+2
Currently, the CPU features exposed to the AST2600 QEMU machines are : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm But, the features of the Cortex A7 CPU on the Aspeed AST2600 A3 SoC are : half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls vfpv4 idiva idivt lpae evtstrm Drop NEON support in the Aspeed AST2600 SoC. Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20220928164719.655586-3-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-10-22Drop useless casts from g_malloc() & friends to pointerMarkus Armbruster1-2/+2
These memory allocation functions return void *, and casting to another pointer type is useless clutter. Drop these casts. If you really want another pointer type, consider g_new(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20220923120025.448759-3-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-10-14hw/arm, loongarch: Move load_image_to_fw_cfg() to common locationSunil V L1-49/+0
load_image_to_fw_cfg() is duplicated by both arm and loongarch. The same function will be required by riscv too. So, it's time to refactor and move this function to a common path. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <20221004092351.18209-2-sunilvl@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-10-12Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Stefan Hajnoczi1-3/+2
into staging pc,virtio: features, tests, fixes, cleanups virtio introspection new serial number opton for cxl vhost user blk dynamic config size virtio-gpio vhost user backend Tests fixes cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNEVeoPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRph8YH+gMWpb5IglE0Q+H2JiQPBwB/Ghy1ohRKnOvZ # lChB7+oy18o2xXRFTOXwG9Ijqsbdn0QMbU/r3NWxBuMzxDow012xiMDniJlJmcXw # /4POOCSTKrIfzVBhsEErVSA9NwSE5cQKr1oiRBGIa9UdZfZ//v7s6SoP4vtyj8RZ # UJVYVnMDtq/0PaN92IMs06lhqo/LkegE7gTGHMBf8Nvw4SgQoZgfPyp1eR+dKOhz # lXNqqvTds9yt8yS65UWbuSrZ9d7GpCQf8nuyLaLaENHd6FQUVfmTTT37l2EKziwp # PK0EwWMHeGkj7LHrylztradhE9xBlIW23ROP8wPdGZHmgLNHbC0= # =20Zb # -----END PGP SIGNATURE----- # gpg: Signature made Mon 10 Oct 2022 13:27:06 EDT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (55 commits) x86: pci: acpi: consolidate PCI slots creation tests: acpi: update expected blobs x86: pci: acpi: reorder Device's _DSM method tests: acpi: whitelist pc/q35 DSDT before moving _ADR field tests: acpi: update expected blobs x86: pci: acpi: reorder Device's _ADR and _SUN fields tests: acpi: whitelist pc/q35 DSDT before moving _ADR field tests: acpi: update expected blobs x86: acpi: cleanup PCI device _DSM duplication tests: acpi: whitelist pc/q35 DSDT before switching _DSM to use ASUN tests: acpi: update expected blobs x86: acpi: _DSM: use Package to pass parameters acpi: x86: refactor PDSM method to reduce nesting tests: acpi: whitelist pc/q35 DSDT due to HPET AML move tests: acpi: update expected blobs after HPET move acpi: x86: deduplicate HPET AML building tests: acpi: whitelist pc/q35 DSDT due to HPET AML move hw/smbios: support for type 8 (port connector) pci: Sanity check mask argument to pci_set_*_by_mask() pci: Remove unused pci_get_*_by_mask() functions ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-10hw/arm/boot: set CPTR_EL3.ESM and SCR_EL3.EnTP2 when booting Linux with EL3Jerome Forissier1-0/+4
According to the Linux kernel booting.rst [1], CPTR_EL3.ESM and SCR_EL3.EnTP2 must be initialized to 1 when EL3 is present and FEAT_SME is advertised. This has to be taken care of when QEMU boots directly into the kernel (i.e., "-M virt,secure=on -cpu max -kernel Image"). Cc: qemu-stable@nongnu.org Fixes: 78cb9776662a ("target/arm: Enable SME for -cpu max") Link: [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/arm64/booting.rst?h=v6.0#n321 Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Message-id: 20221003145641.1921467-1-jerome.forissier@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-10-09acpi: arm/virt: build_gtdt: fix invalid 64-bit physical addressesMiguel Luis1-3/+2
Per the ACPI 6.5 specification, on the GTDT Table Structure, the Counter Control Block Address and Counter Read Block Address fields of the GTDT table should be set to 0xFFFFFFFFFFFFFFFF if not provided, rather than 0x0. Fixes: 41041e57085 ("acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()") Signed-off-by: Miguel Luis <miguel.luis@oracle.com> Message-Id: <20220920162137.75239-3-miguel.luis@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ani Sinha <ani@anisinha.ca>
2022-09-29hw/arm/virt: Fix devicetree warning about the SMMU nodeJean-Philippe Brucker1-2/+0
The SMMUv3 node isn't expected to have clock properties (unlike the SMMUv2). Fix the corresponding dt-validate warning: smmuv3@9050000: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: linux/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweaked commit message as suggested by Eric] Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20220927100347.176606-7-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-09-29hw/arm/virt: Use "msi-map" devicetree property for PCIJean-Philippe Brucker1-2/+2
The "msi-parent" property can be used on the PCI node when MSIs do not contain sideband data (device IDs) [1]. In QEMU, MSI transactions contain the requester ID, so the PCI node should use the "msi-map" property instead of "msi-parent". In our case the property describes an identity map between requester ID and sideband data. This fixes a warning when passing the DTB generated by QEMU to dtc, following a recent change to the GICv3 node: Warning (msi_parent_property): /pcie@10000000:msi-parent: property size (4) too small for cell size 1 [1] linux/Documentation/devicetree/bindings/pci/pci-msi.txt Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20220927100347.176606-4-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-09-29hw/arm/virt: Fix devicetree warning about the GIC nodeJean-Philippe Brucker1-0/+1
The GICv3 bindings requires a #msi-cells property for the ITS node. Fix the corresponding dt-validate warning: interrupt-controller@8000000: msi-controller@8080000: '#msi-cells' is a required property From schema: linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20220927100347.176606-3-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-09-29hw/arm/virt: Fix devicetree warning about the root nodeJean-Philippe Brucker1-0/+1
The devicetree specification requires a 'model' property in the root node. Fix the corresponding dt-validate warning: /: 'model' is a required property From schema: dtschema/schemas/root-node.yaml Use the same name for model as for compatible. The specification recommends that 'compatible' follows the format 'manufacturer,model' and 'model' follows the format 'manufacturer,model-number'. Since our 'compatible' doesn't observe this, 'model' doesn't really need to either. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20220927100347.176606-2-jean-philippe@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-09-29hw/arm/xlnx-zynqmp: Connect ZynqMP's USB controllersFrancisco Iglesias1-0/+36
Connect ZynqMP's USB controllers. Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220920081517.25401-1-frasse.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-09-14target/arm: Make boards pass base address to armv7m_load_kernel()Peter Maydell11-11/+14
Currently armv7m_load_kernel() takes the size of the block of memory where it should load the initial guest image, but assumes that it should always load it at address 0. This happens to be true of all our M-profile boards at the moment, but it isn't guaranteed to always be so: M-profile CPUs can be configured (via init-svtor and init-nsvtor, which match equivalent hardware configuration signals) to have the initial vector table at any address, not just zero. (For instance the Teeny board has the boot ROM at address 0x0200_0000.) Add a base address argument to armv7m_load_kernel(), so that callers now pass in both base address and size. All the current callers pass 0, so this is not a behaviour change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220823160417.3858216-3-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-09-14target/arm: Remove useless TARGET_BIG_ENDIAN check in armv7m_load_kernel()Peter Maydell1-8/+1
Arm system emulation targets always have TARGET_BIG_ENDIAN clear, so there is no need to have handling in armv7m_load_kernel() for the case when it is defined. Remove the unnecessary code. Side notes: * our M-profile implementation is always little-endian (that is, it makes the IMPDEF choice that the read-only AIRCR.ENDIANNESS is 0) * if we did want to handle big-endian ELF files here we should do it the way that hw/arm/boot.c:arm_load_elf() does, by looking at the ELF header to see what endianness the file itself is Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220823160417.3858216-2-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-09-14target/arm: Add cortex-a35Hao Wu1-0/+1
Add cortex A35 core and enable it for virt board. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Joe Komlodi <komlodi@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220819002015.1663247-1-wuhaotsh@google.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-08-25hw: Add compat machines for 7.2Cornelia Huck1-1/+8
Add 7.2 machine types for arm/i440fx/m68k/q35/s390x/spapr. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220727121755.395894-1-cohuck@redhat.com> [thuth: fixed conflict with pcmc->legacy_no_rng_seed] Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.1 at 2024-10-28 11:05:11 +0000