aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-03-12hw/misc: Add NPCM7XX MFT ModuleHao Wu4-0/+619
This patch implements Multi Function Timer (MFT) module for NPCM7XX. This module is mainly used to configure PWM fans. It has just enough functionality to make the PWM fan kernel module work. The module takes two input, the max_rpm of a fan (modifiable via QMP) and duty cycle (a GPIO from the PWM module.) The actual measured RPM is equal to max_rpm * duty_cycle / NPCM7XX_PWM_MAX_DUTY. The RPM is measured as a counter compared to a prescaled input clock. The kernel driver reads this counter and report to user space. Refs: https://github.com/torvalds/linux/blob/master/drivers/hwmon/npcm750-pwm-fan.c Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: Add GPIOs for duty in NPCM7xx PWMHao Wu2-1/+7
This patch adds GPIOs in NPCM7xx PWM module for its duty values. The purpose of this is to connect it to the MFT module to provide an input for measuring a PWM fan's RPM. Each PWM module has NPCM7XX_PWM_PER_MODULE of GPIOs, each one corresponds to one PWM instance and can connect to multiple fan instances in MFT. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm/virt: KVM: The IPA lower bound is 32Andrew Jones3-10/+23
The virt machine already checks KVM_CAP_ARM_VM_IPA_SIZE to get the upper bound of the IPA size. If that bound is lower than the highest possible GPA for the machine, then QEMU will error out. However, the IPA is set to 40 when the highest GPA is less than or equal to 40, even when KVM may support an IPA limit as low as 32. This means KVM may fail the VM creation unnecessarily. Additionally, 40 is selected with the value 0, which means use the default, and that gets around a check in some versions of KVM, causing a difficult to debug fail. Always use the IPA size that corresponds to the highest possible GPA, unless it's lower than 32, in which case use 32. Also, we must still use 0 when KVM only supports the legacy fixed 40 bit IPA. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Message-id: 20210310135218.255205-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12accel: kvm: Fix kvm_type invocationAndrew Jones2-0/+3
Prior to commit f2ce39b4f067 a MachineClass kvm_type method only needed to be registered to ensure it would be executed. With commit f2ce39b4f067 a kvm-type machine property must also be specified. hw/arm/virt relies on the kvm_type method to pass its selected IPA limit to KVM, but this is not exposed as a machine property. Restore the previous functionality of invoking kvm_type when it's present. Fixes: f2ce39b4f067 ("vl: make qemu_get_machine_opts static") Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210310135218.255205-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/timer/sse-timer: Propagate eventual error in sse_timer_realize()Philippe Mathieu-Daudé1-0/+1
If the SSECounter link is absent, we set an error message in sse_timer_realize() but forgot to propagate this error. Add the missing 'return'. Fixes: CID 1450755 (Null pointer dereferences) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210312001845.1562670-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12tests/acceptance: drop ARMBIAN_ARTIFACTS_CACHED condition for orangepi-pc, ↵Niek Linnenbank2-14/+0
cubieboard tests Previously the ARMBIAN_ARTIFACTS_CACHED pre-condition was added to allow running tests that have already existing armbian.com artifacts stored in the local avocado cache, but do not have working URLs to download a fresh copy. At this time of writing the URLs for artifacts on the armbian.com server are updated and working. Any future broken URLs will result in a skipped acceptance test, for example: (1/5) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi: CANCEL: Missing asset https://apt.armbian.com/pool/main/l/linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb (0.53 s) This commits removes the ARMBIAN_ARTIFACTS_CACHED pre-condition such that the acceptance tests for the orangepi-pc and cubieboard machines can run. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Message-id: 20210310195820.21950-6-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12tests/acceptance: update sunxi kernel from armbian to 5.10.16Niek Linnenbank2-24/+24
The linux kernel 4.20.7 binary for sunxi has been removed from apt.armbian.com: $ ARMBIAN_ARTIFACTS_CACHED=yes AVOCADO_ALLOW_LARGE_STORAGE=yes avocado --show=app,console run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py Fetching asset from tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi ... (1/6) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi: CANCEL: Missing asset https://apt.armbian.com/pool/main/l/linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb (0.55 s) This commit updates the sunxi kernel to 5.10.16 for the acceptance tests of the orangepi-pc and cubieboard machines. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Message-id: 20210310195820.21950-5-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12tests/acceptance/boot_linux_console: change URL for ↵Niek Linnenbank1-1/+1
test_arm_orangepi_bionic_20_08 Update the download URL of the Armbian 20.08 Bionic image for test_arm_orangepi_bionic_20_08 of the orangepi-pc machine. The archive.armbian.com URL contains more images and should keep stable for a longer period of time than dl.armbian.com. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Message-id: 20210310195820.21950-4-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12tests/acceptance/boot_linux_console: remove Armbian 19.11.3 bionic test for ↵Niek Linnenbank1-49/+23
orangepi-pc machine The image for Armbian 19.11.3 bionic has been removed from the armbian server. Without the image as input the test arm_orangepi_bionic_19_11 cannot run. This commit removes the test completely and merges the code of the generic function do_test_arm_orangepi_uboot_armbian back with the 20.08 test. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Message-id: 20210310195820.21950-3-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/net/allwinner-sun8i-emac: traverse transmit queue using TX_CUR_DESC ↵Niek Linnenbank1-26/+32
register value Currently the emulated EMAC for sun8i always traverses the transmit queue from the head when transferring packets. It searches for a list of consecutive descriptors whichs are flagged as ready for processing and transmits their payloads accordingly. The controller stops processing once it finds a descriptor that is not marked ready. While the above behaviour works in most situations, it is not the same as the actual EMAC in hardware. Actual hardware uses the TX_CUR_DESC register value to keep track of the last position in the transmit queue and continues processing from that position when software triggers the start of DMA processing. The currently emulated behaviour can lead to packet loss on transmit when software fills the transmit queue with ready descriptors that overlap the tail of the circular list. This commit modifies the emulated EMAC for sun8i such that it processes the transmit queue using the TX_CUR_DESC register in the same way as hardware. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210310195820.21950-2-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12target/arm: Update sve reduction vs simd_descRichard Henderson2-2/+2
With the reduction operations, we intentionally increase maxsz to the next power of 2, so as to fill out the reduction tree correctly. Since e2e7168a214b, oprsz must equal maxsz, with exceptions for small vectors, so this triggers an assertion for vector sizes > 32 that are not themselves a power of 2. Pass the power-of-two value in the simd_data field instead. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-9-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12target/arm: Update WHILE for PREDDESCRichard Henderson2-5/+6
Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12target/arm: Update CNTP for PREDDESCRichard Henderson2-6/+6
Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12target/arm: Update BRKA, BRKB, BRKN for PREDDESCRichard Henderson2-18/+16
Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12target/arm: Update find_last_active for PREDDESCRichard Henderson2-7/+6
Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12target/arm: Fix sve_punpk_p vs odd vector lengthsRichard Henderson1-2/+2
Wrote too much with punpk1 with vl % 512 != 0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12target/arm: Fix sve_zip_p vs odd vector lengthsRichard Henderson1-11/+14
Wrote too much with low-half zip (zip1) with vl % 512 != 0. Adjust all of the x + (y << s) to x | (y << s) as a style fix. We only ever have exact overlap between D, M, and N. Therefore we only need a single temporary, and we do not need to check for partial overlap. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12target/arm: Fix sve_uzp_p vs odd vector lengthsRichard Henderson1-9/+21
Missed out on compressing the second half of a predicate with length vl % 512 > 256. Adjust all of the x + (y << s) to x | (y << s) as a general style fix. Drop the extract64 because the input uint64_t are known to be already zero-extended from the current size of the predicate. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm/smmuv3: Uniformize sid tracesEric Auger1-12/+12
Convert all sid printouts to sid=0x%x. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210309102742.30442-8-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm/smmuv3: Fix SMMU_CMD_CFGI_STE_RANGE handlingEric Auger2-14/+25
If the whole SID range (32b) is invalidated (SMMU_CMD_CFGI_ALL), @end overflows and we fail to handle the command properly. Once this gets fixed, the current code really is awkward in the sense it loops over the whole range instead of removing the currently cached configs through a hash table lookup. Fix both the overflow and the lookup. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210309102742.30442-7-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm/smmuv3: Enforce invalidation on a power of two rangeEric Auger2-15/+37
As of today, the driver can invalidate a number of pages that is not a power of 2. However IOTLB unmap notifications and internal IOTLB invalidations work with masks leading to erroneous invalidations. In case the range is not a power of 2, split invalidations into power of 2 invalidations. When looking for a single page entry in the vSMMU internal IOTLB, let's make sure that if the entry is not found using a g_hash_table_remove() we iterate over all the entries to find a potential range that overlaps it. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210309102742.30442-6-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm/smmu-common: Fix smmu_iotlb_inv_iova when asid is not setEric Auger1-1/+1
If the asid is not set, do not attempt to locate the key directly as all inserted keys have a valid asid. Use g_hash_table_foreach_remove instead. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210309102742.30442-5-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12virtio-iommu: Handle non power of 2 range invalidationsEric Auger1-3/+16
Unmap notifiers work with an address mask assuming an invalidation range of a power of 2. Nothing mandates this in the VIRTIO-IOMMU spec. So in case the range is not a power of 2, split it into several invalidations. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20210309102742.30442-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12dma: Introduce dma_aligned_pow2_mask()Eric Auger3-23/+45
Currently get_naturally_aligned_size() is used by the intel iommu to compute the maximum invalidation range based on @size which is a power of 2 while being aligned with the @start address and less than the maximum range defined by @gaw. This helper is also useful for other iommu devices (virtio-iommu, SMMUv3) to make sure IOMMU UNMAP notifiers only are called with power of 2 range sizes. Let's move this latter into dma-helpers.c and rename it into dma_aligned_pow2_mask(). Also rewrite the helper so that it accomodates UINT64_MAX values for the size mask and max mask. It now returns a mask instead of a size. Change the caller. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20210309102742.30442-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12intel_iommu: Fix mask may be uninitialized in vtd_context_device_invalidateEric Auger1-0/+2
With -Werror=maybe-uninitialized configuration we get ../hw/i386/intel_iommu.c: In function ‘vtd_context_device_invalidate’: ../hw/i386/intel_iommu.c:1888:10: error: ‘mask’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 1888 | mask = ~mask; | ~~~~~^~~~~~~ Add a g_assert_not_reached() to avoid the error. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210309102742.30442-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm: versal: Add support for the XRAMsEdgar E. Iglesias3-0/+50
Connect the support for the Versal Accelerator RAMs (XRAMs). Reviewed-by: Luc Michel <luc@lmichel.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210308224637.2949533-3-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: versal: Add a model of the XRAM controllerEdgar E. Iglesias3-0/+351
Add a model of the Xilinx Versal Accelerator RAM (XRAM). This is mainly a stub to make firmware happy. The size of the RAMs can be probed. The interrupt mask logic is modelled but none of the interrups will ever be raised unless injected. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210308224637.2949533-2-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' ↵Peter Maydell28-292/+750
into staging ppc patch queue for 2021-03-10 Next batch of patches for the ppc target and machine types. Includes: * Several cleanups for sm501 from Peter Maydell * An update to the SLOF guest firmware * Improved handling of hotplug failures in spapr, associated cleanups to the hotplug handling code * Several etsec fixes and cleanups from Bin Meng * Assorted other fixes and cleanups # gpg: Signature made Wed 10 Mar 2021 04:08:53 GMT # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dg-gitlab/tags/ppc-for-6.0-20210310: spapr.c: send QAPI event when memory hotunplug fails spapr.c: remove duplicated assert in spapr_memory_unplug_request() target/ppc: fix icount support on Book-e vms accessing SPRs qemu_timer.c: add timer_deadline_ms() helper spapr_pci.c: add 'unplug already in progress' message for PCI unplug spapr.c: add 'unplug already in progress' message for PHB unplug hw/ppc: e500: Add missing <ranges> in the eTSEC node hw/net: fsl_etsec: Fix build error when HEX_DUMP is on spapr_drc.c: use DRC reconfiguration to cleanup DIMM unplug state spapr_drc.c: add hotunplug timeout for CPUs spapr_drc.c: introduce unplug_timeout_timer target/ppc: Fix bcdsub. emulation when result overflows docs/system: Extend PPC section spapr: rename spapr_drc_detach() to spapr_drc_unplug_request() spapr_drc.c: use spapr_drc_release() in isolate_physical/set_unusable pseries: Update SLOF firmware image spapr_drc.c: do not call spapr_drc_detach() in drc_isolate_logical() hw/display/sm501: Inline template header into C file hw/display/sm501: Expand out macros in template header hw/display/sm501: Remove dead code for non-32-bit RGB surfaces Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11target/m68k: add M68K_FEATURE_UNALIGNED_DATA featureMark Cave-Ayland3-1/+7
According to the M68040UM Appendix D the requirement for data accesses to be word aligned is only for the 68000, 68008 and 68010 CPUs. Later CPUs from the 68020 onwards will allow unaligned data accesses but at the cost of being less efficient. Add a new M68K_FEATURE_UNALIGNED_DATA feature to specify that data accesses are not required to be word aligned, and don't perform the alignment on the stack pointer when taking an exception if this feature is not selected. This is required because the MacOS DAFB driver attempts to call an A-trap with a byte-aligned stack pointer during initialisation and without this the stack pointer is off by one when the A-trap returns. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210308121155.2476-4-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-11target/m68k: reformat m68k_features enumMark Cave-Ayland1-22/+44
Move the feature comment from after the feature name to the preceding line to allow for longer feature names and descriptions without hitting the 80 character line limit. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210308121155.2476-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-11target/m68k: don't set SSW ATC bit for physical bus errorsMark Cave-Ayland1-1/+11
If a NuBus slot doesn't contain a card, the Quadra hardware generates a physical bus error if the CPU attempts to access the slot address space. Both Linux and MacOS use a separate bus error handler during NuBus accesses in order to detect and recover when addressing empty slots. According to the MC68040 users manual the ATC bit of the SSW is used to distinguish between ATC faults and physical bus errors. MacOS specifically checks the stack frame generated by a NuBus error and panics if the SSW ATC bit is set. Update m68k_cpu_transaction_failed() so that the SSW ATC bit is not set if the memory API returns MEMTX_DECODE_ERROR which will be used to indicate that an access to an empty NuBus slot occurred. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210308121155.2476-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-11target/m68k: implement rtr instructionLaurent Vivier1-0/+20
This is needed to boot MacOS ROM. Pull the condition code and the program counter from the stack. Operation: (SP) -> CCR SP + 2 -> SP (SP) -> PC SP + 4 -> SP This operation is not privileged. Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210307212552.523552-1-laurent@vivier.eu>
2021-03-11Merge remote-tracking branch ↵Peter Maydell79-134/+147
'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request # gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits) sysemu: Let VMChangeStateHandler take boolean 'running' argument sysemu/runstate: Let runstate_is_running() return bool hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards qemu-common.h: Update copyright string to 2021 tests/fp/fp-test: Replace the word 'blacklist' qemu-options: Replace the word 'blacklist' seccomp: Replace the word 'blacklist' scripts/tracetool: Replace the word 'whitelist' ui: Replace the word 'whitelist' virtio-gpu: Adjust code space style exec/memory: Use struct Object typedef fuzz-test: remove unneccessary debugging flags net: Use id_generate() in the network subsystem, too MAINTAINERS: Fix the location of tools manuals vhost_user_gpu: Drop dead check for g_malloc() failure backends/dbus-vmstate: Fix short read error handling target/hexagon/gen_tcg_funcs: Fix a typo hw/elf_ops: Fix a typo ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch ↵Peter Maydell56-318/+921
'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging Testing, guest-loader and other misc tweaks - add warning text to quickstart example - add CFI tests to CI - use --arch-only for docker pre-requisites - fix .editorconfig for emacs - add guest-loader for Xen-like hypervisor testing - move generic-loader docs into manual proper - move semihosting out of hw/ # gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2: semihosting: Move hw/semihosting/ -> semihosting/ semihosting: Move include/hw/semihosting/ -> include/semihosting/ tests/avocado: add boot_xen tests docs: add some documentation for the guest-loader docs: move generic-loader documentation into the main manual hw/core: implement a guest-loader to support static hypervisor guests device_tree: add qemu_fdt_setprop_string_array helper hw/riscv: migrate fdt field to generic MachineState hw/board: promote fdt from ARM VirtMachineState to MachineState .editorconfig: update the automatic mode setting for Emacs tests/docker: Use --arch-only when building Debian cross image gitlab-ci.yml: Add jobs to test CFI flags gitlab-ci.yml: Allow custom # of parallel linkers tests/docker: add a test-tcg for building then running check-tcg docs/system: add a gentle prompt for the complexity to come Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-03-09' into ↵Peter Maydell25-208/+408
staging nbd patches for 2021-03-09 - Add Vladimir as NBD co-maintainer - Fix reporting of holes in NBD_CMD_BLOCK_STATUS - Improve command-line parsing accuracy of large numbers (anything going through qemu_strtosz), including the deprecation of hex+suffix - Improve some error reporting in the block layer # gpg: Signature made Tue 09 Mar 2021 15:38:10 GMT # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2021-03-09: block/qcow2: refactor qcow2_update_options_prepare error paths block/qed: bdrv_qed_do_open: deal with errp block/qcow2: simplify qcow2_co_invalidate_cache() block/qcow2: read_cache_sizes: return status value block/qcow2-bitmap: return status from qcow2_store_persistent_dirty_bitmaps block/qcow2-bitmap: improve qcow2_load_dirty_bitmaps() interface block/qcow2: qcow2_get_specific_info(): drop error propagation blockjob: return status from block_job_set_speed() block/mirror: drop extra error propagation in commit_active_start() block: drop extra error propagation for bdrv_set_backing_hd blockdev: fix drive_backup_prepare() missed error block: check return value of bdrv_open_child and drop error propagation utils: Deprecate hex-with-suffix sizes utils: Improve qemu_strtosz() to have 64 bits of precision utils: Enhance testsuite for do_strtosz() nbd: server: Report holes for raw images MAINTAINERS: add Vladimir as co-maintainer of NBD Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11ui/cocoa: Fix mouse association stateAkihiko Odaki1-16/+8
ui/cocoa deassociates the mouse input and the mouse cursor position only when relative movement inputs are expected. Such inputs may let the mouse cursor leave the view and cause undesired side effects if they are associated. On the other hand, the problem does not occur when inputting absolute points, and the association allows seamless cursor movement across views. However, the synchronization of the association and the expected input type was only done when grabbing the mouse. In reality, the state whether the emulated input device expects absolute pointing inputs or relative movement inputs can vary dynamically due to USB device hot-plugging, for example. This change adds association state updates according to input type expectation changes. It also removes an internal flag representing the association state because the state can now be determined with the current input type expectation and it only adds the complexity of the state tracking. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20210222150714.21766-1-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-11Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210309' ↵Peter Maydell7-19/+625
into staging Aspeed patches : * New model for the Aspeed LPC controller * Misc cleanups # gpg: Signature made Tue 09 Mar 2021 11:54:25 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20210309: hw/misc: Model KCS devices in the Aspeed LPC controller hw/misc: Add a basic Aspeed LPC controller model hw/arm: ast2600: Correct the iBT interrupt ID hw/arm: ast2600: Set AST2600_MAX_IRQ to value from datasheet hw/arm: ast2600: Force a multiple of 32 of IRQs for the GIC hw/arm/aspeed: Fix location of firmware images in documentation arm/ast2600: Fix SMP booting with -kernel Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11ui/cocoa: Mark variables staticAkihiko Odaki1-7/+7
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20210225084202.39601-1-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-11ui/cocoa: Clear modifiers whenever possibleAkihiko Odaki1-72/+76
ui/cocoa does not receive NSEventTypeFlagsChanged when it is not active, and the modifier state can be desynchronized in such a situation. [NSEvent -modifierFlags] tells whether a modifier is *not* pressed, so check it whenever receiving an event and clear the modifier if it is not pressed. Note that [NSEvent -modifierFlags] does not tell if a certain modifier *is* pressed because the documented mask for [NSEvent -modifierFlags] generalizes left shift and right shift, for example. CapsLock is the only exception. The pressed state is synchronized only with NSEventTypeFlagsChanged. This change also removes modifier keys from keycode map. If they are input with NSEventTypeKeyDown or NSEventTypeKeyUp, it leads to desynchronization. Although such a situation is not observed, they are removed just in case. Moreover, QKbdState is introduced for automatic key state tracking. Thanks to Konstantin Nazarov for testing and finding a bug in this change: https://gist.github.com/akihikodaki/87df4149e7ca87f18dc56807ec5a1bc5#gistcomment-3659419 Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20210310144602.58528-1-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-11ui/cocoa: Do not rely on the first argumentAkihiko Odaki1-14/+15
The first argument of the executable was used to get its path, but it is not reliable because the executer can specify any arbitrary string. Use the interfaces provided by QEMU and the platform to get those paths. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20210309122226.23117-2-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-11ui/cocoa: Show QEMU icon in the about windowAkihiko Odaki1-9/+5
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20210309122226.23117-1-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-11docs: Fix removal text of -show-cursorThomas Huth1-2/+2
We should say now when it was removed, not when it was deprecated. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210310045821.1004396-1-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-11ui/cocoa: Use kCGColorSpaceSRGBAkihiko Odaki1-7/+2
kCGColorSpaceGenericRGB | Apple Developer Documentation https://developer.apple.com/documentation/coregraphics/kcgcolorspacegenericrgb > Deprecated > Use kCGColorSpaceSRGB instead. This change also removes the legacy color space specification for PowerPC. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20210305121304.65096-1-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-11ui/gtk: Remove NULL checks in gd_switchAkihiko Odaki1-4/+2
c821a58ee7 ("ui/console: Pass placeholder surface to display") eliminated the possibility that NULL is passed as surface to dpy_gfx_switch and removed some NULL checks from gd_switch, but the removal was not thoroughly. Remaining NULL checks were confusing for Coverity and probably also for humans. This change removes those NULL checks. Reported-by: Coverity (CID 1448421) Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210308140713.17901-1-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-10Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into ↵Peter Maydell9-395/+1445
staging hw/block/nvme updates * NVMe subsystem support (`-device nvme-subsys`) (Minwoo Im) * Namespace (De|At)tachment support (Minwoo Im) * Simple Copy command support (Klaus Jensen) * Flush broadcast support (Gollu Appalanaidu) * QEMUIOVector/QEMUSGList duality refactoring (Klaus Jensen) plus various fixes from Minwoo, Gollu, Dmitry and me. v2: - add `nqn` nvme-subsys device parameter instead of using `id`. (Paolo) # gpg: Signature made Tue 09 Mar 2021 11:44:17 GMT # gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9 # gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown] # gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838 # Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9 * remotes/nvme/tags/nvme-next-pull-request: (38 commits) hw/block/nvme: support Identify NS Attached Controller List hw/block/nvme: support changed namespace asynchronous event hw/block/nvme: support namespace attachment command hw/block/nvme: refactor nvme_select_ns_iocs hw/block/nvme: support allocated namespace type hw/block/nvme: fix allocated namespace list to 256 hw/block/nvme: fix namespaces array to 1-based hw/block/nvme: support namespace detach hw/block/nvme: refactor nvme_dma hw/block/nvme: remove the req dependency in map functions hw/block/nvme: try to deal with the iov/qsg duality hw/block/nvme: fix strerror printing hw/block/nvme: remove block accounting for write zeroes hw/block/nvme: remove redundant len member in compare context hw/block/nvme: report non-mdts command size limit for dsm hw/block/nvme: add trace event for zone read check hw/block/nvme: fix potential compilation error hw/block/nvme: add identify trace event hw/block/nvme: remove unnecessary endian conversion hw/block/nvme: align zoned.zasl with mdts ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10Merge remote-tracking branch ↵Peter Maydell64-6154/+741
'remotes/thuth-gitlab/tags/pull-request-2021-03-09' into staging * Add some missing gitlab-CI job dependencies * Re-enable "make check SPEED=slow" * Improve the gitlab-pipeline-status script * Clean up inclusing of qtest.h headers * Improve libqos/qgraph documentation * Fix downloading problem in the acceptance tests * Remove deprecated target tilegx * Add new bsd-user maintainers # gpg: Signature made Tue 09 Mar 2021 10:27:29 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/pull-request-2021-03-09: bsd-user: Add new maintainers Remove deprecated target tilegx Acceptance Tests: restore filtering of tests by target arch Acceptance Tests: restore downloading of VM images docs/devel/qgraph: improve qgraph documentation libqos/qgraph: format qgraph comments for sphinx documentation scripts/ci/gitlab-pipeline-status: give more info when pipeline not found scripts/ci/gitlab-pipeline-status: give more information on failures scripts/ci/gitlab-pipeline-status: split utlity function for HTTP GET meson: Re-enable the possibility to run "make check SPEED=slow" docker: OpenSBI build job depends on OpenSBI container docker: EDK2 build job depends on EDK2 container docker: Alpine build job depends on Alpine container qtest: delete superfluous inclusions of qtest.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10semihosting: Move hw/semihosting/ -> semihosting/Philippe Mathieu-Daudé11-3/+3
With the exception of hw/core/, the hw/ directory only contains device models used in system emulation. Semihosting is also used by user emulation. As a generic feature, move it out of hw/ directory. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-3-f4bug@amsat.org> Message-Id: <20210305135451.15427-3-alex.bennee@linaro.org>
2021-03-10semihosting: Move include/hw/semihosting/ -> include/semihosting/Philippe Mathieu-Daudé28-32/+32
We want to move the semihosting code out of hw/ in the next patch. This patch contains the mechanical steps, created using: $ git mv include/hw/semihosting/ include/ $ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-2-f4bug@amsat.org> Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
2021-03-10tests/avocado: add boot_xen testsAlex Bennée2-0/+119
These tests make sure we can boot the Xen hypervisor with a Dom0 kernel using the guest-loader. We currently have to use a kernel I built myself because there are issues using the Debian kernel images. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20210303173642.3805-8-alex.bennee@linaro.org>
2021-03-10docs: add some documentation for the guest-loaderAlex Bennée3-0/+56
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210303173642.3805-7-alex.bennee@linaro.org>
generated by cgit v1.1 at 2025-09-20 14:25:56 +0000