Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190822-pull-request' into staging

vga: a collection of ati fixes/improvements.

# gpg: Signature made Thu 22 Aug 2019 09:04:52 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190822-pull-request:
  ati-vga: Implement dummy VBlank IRQ
  ati-vga: Add limited support for big endian frame buffer aperture
  ati-vga: Attempt to handle CRTC offset not exact multiple of stride
  ati-vga: Fix hardware cursor image offset
  ati-vga: Fix cursor color with guest_hwcursor=true
  ati-vga: Fix GPIO_MONID register write
  ati-vga: Add some register definitions for debugging
  ati-vga: Add registers for getting apertures

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

4 files changed, 126 insertions, 18 deletions

diff --git a/hw/display/ati.c b/hw/display/ati.c
index 35f49a5..8f940ee 100644
--- a/hw/display/ati.c
+++ b/hw/display/ati.c
@@ -50,6 +50,7 @@ static void ati_vga_switch_mode(ATIVGAState *s)
         s->mode = EXT_MODE;
         if (s->regs.crtc_gen_cntl & CRTC2_EN) {
             /* CRT controller enabled, use CRTC values */
+            /* FIXME Should these be the same as VGA CRTC regs? */
             uint32_t offs = s->regs.crtc_offset & 0x07ffffff;
             int stride = (s->regs.crtc_pitch & 0x7ff) * 8;
             int bpp = 0;
@@ -89,7 +90,9 @@ static void ati_vga_switch_mode(ATIVGAState *s)
             DPRINTF("Switching to %dx%d %d %d @ %x\n", h, v, stride, bpp, offs);
             vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE);
             vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED);
-            s->vga.big_endian_fb = false;
+            s->vga.big_endian_fb = (s->regs.config_cntl & APER_0_ENDIAN ||
+                                    s->regs.config_cntl & APER_1_ENDIAN ?
+                                    true : false);
             /* reset VBE regs then set up mode */
             s->vga.vbe_regs[VBE_DISPI_INDEX_XRES] = h;
             s->vga.vbe_regs[VBE_DISPI_INDEX_YRES] = v;
@@ -101,16 +104,23 @@ static void ati_vga_switch_mode(ATIVGAState *s)
                 (s->regs.dac_cntl & DAC_8BIT_EN ? VBE_DISPI_8BIT_DAC : 0));
             /* now set offset and stride after enable as that resets these */
             if (stride) {
+                int bypp = DIV_ROUND_UP(bpp, BITS_PER_BYTE);
+
                 vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_VIRT_WIDTH);
                 vbe_ioport_write_data(&s->vga, 0, stride);
-                if (offs % stride == 0) {
-                    vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_Y_OFFSET);
-                    vbe_ioport_write_data(&s->vga, 0, offs / stride);
-                } else {
-                    /* FIXME what to do with this? */
-                    error_report("VGA offset is not multiple of pitch, "
-                                 "expect bad picture");
+                stride *= bypp;
+                if (offs % stride) {
+                    DPRINTF("CRTC offset is not multiple of pitch\n");
+                    vbe_ioport_write_index(&s->vga, 0,
+                                           VBE_DISPI_INDEX_X_OFFSET);
+                    vbe_ioport_write_data(&s->vga, 0, offs % stride / bypp);
                 }
+                vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_Y_OFFSET);
+                vbe_ioport_write_data(&s->vga, 0, offs / stride);
+                DPRINTF("VBE offset (%d,%d), vbe_start_addr=%x\n",
+                        s->vga.vbe_regs[VBE_DISPI_INDEX_X_OFFSET],
+                        s->vga.vbe_regs[VBE_DISPI_INDEX_Y_OFFSET],
+                        s->vga.vbe_start_addr);
             }
         }
     } else {
@@ -132,9 +142,8 @@ static void ati_cursor_define(ATIVGAState *s)
         return; /* Do not update cursor if locked or rendered by guest */
     }
     /* FIXME handle cur_hv_offs correctly */
-    src = s->vga.vram_ptr + (s->regs.crtc_offset & 0x07ffffff) +
-          s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) -
-          (s->regs.cur_hv_offs & 0xffff) * 16;
+    src = s->vga.vram_ptr + s->regs.cur_offset -
+          (s->regs.cur_hv_offs >> 16) - (s->regs.cur_hv_offs & 0xffff) * 16;
     for (i = 0; i < 64; i++) {
         for (j = 0; j < 8; j++, idx++) {
             data[idx] = src[i * 16 + j];
@@ -190,8 +199,7 @@ static void ati_cursor_draw_line(VGACommonState *vga, uint8_t *d, int scr_y)
         return;
     }
     /* FIXME handle cur_hv_offs correctly */
-    src = s->vga.vram_ptr + (s->regs.crtc_offset & 0x07ffffff) +
-          s->cursor_offset + (scr_y - vga->hw_cursor_y) * 16;
+    src = s->vga.vram_ptr + s->cursor_offset + (scr_y - vga->hw_cursor_y) * 16;
     dp = &dp[vga->hw_cursor_x];
     h = ((s->regs.crtc_h_total_disp >> 16) + 1) * 8;
     for (i = 0; i < 8; i++) {
@@ -207,7 +215,7 @@ static void ati_cursor_draw_line(VGACommonState *vga, uint8_t *d, int scr_y)
                 }
             } else {
                 color = (xbits & BIT(7) ? s->regs.cur_color1 :
-                                          s->regs.cur_color0) << 8 | 0xff;
+                                          s->regs.cur_color0) | 0xff000000;
             }
             if (vga->hw_cursor_x + i * 8 + j >= h) {
                 return; /* end of screen, don't span to next line */
@@ -235,6 +243,21 @@ static uint64_t ati_i2c(bitbang_i2c_interface *i2c, uint64_t data, int base)
     return data;
 }
 
+static void ati_vga_update_irq(ATIVGAState *s)
+{
+    pci_set_irq(&s->dev, !!(s->regs.gen_int_status & s->regs.gen_int_cntl));
+}
+
+static void ati_vga_vblank_irq(void *opaque)
+{
+    ATIVGAState *s = opaque;
+
+    timer_mod(&s->vblank_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
+              NANOSECONDS_PER_SECOND / 60);
+    s->regs.gen_int_status |= CRTC_VBLANK_INT;
+    ati_vga_update_irq(s);
+}
+
 static inline uint64_t ati_reg_read_offs(uint32_t reg, int offs,
                                          unsigned int size)
 {
@@ -275,6 +298,12 @@ static uint64_t ati_mm_read(void *opaque, hwaddr addr, unsigned int size)
                                 addr - (BIOS_0_SCRATCH + i * 4), size);
         break;
     }
+    case GEN_INT_CNTL:
+        val = s->regs.gen_int_cntl;
+        break;
+    case GEN_INT_STATUS:
+        val = s->regs.gen_int_status;
+        break;
     case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3:
         val = ati_reg_read_offs(s->regs.crtc_gen_cntl,
                                 addr - CRTC_GEN_CNTL, size);
@@ -304,9 +333,27 @@ static uint64_t ati_mm_read(void *opaque, hwaddr addr, unsigned int size)
     case PALETTE_DATA:
         val = vga_ioport_read(&s->vga, VGA_PEL_D);
         break;
+    case CNFG_CNTL:
+        val = s->regs.config_cntl;
+        break;
     case CNFG_MEMSIZE:
         val = s->vga.vram_size;
         break;
+    case CONFIG_APER_0_BASE:
+    case CONFIG_APER_1_BASE:
+        val = pci_default_read_config(&s->dev,
+                                      PCI_BASE_ADDRESS_0, size) & 0xfffffff0;
+        break;
+    case CONFIG_APER_SIZE:
+        val = s->vga.vram_size;
+        break;
+    case CONFIG_REG_1_BASE:
+        val = pci_default_read_config(&s->dev,
+                                      PCI_BASE_ADDRESS_2, size) & 0xfffffff0;
+        break;
+    case CONFIG_REG_APER_SIZE:
+        val = memory_region_size(&s->mm);
+        break;
     case MC_STATUS:
         val = 5;
         break;
@@ -486,6 +533,21 @@ static void ati_mm_write(void *opaque, hwaddr addr,
                            addr - (BIOS_0_SCRATCH + i * 4), data, size);
         break;
     }
+    case GEN_INT_CNTL:
+        s->regs.gen_int_cntl = data;
+        if (data & CRTC_VBLANK_INT) {
+            ati_vga_vblank_irq(s);
+        } else {
+            timer_del(&s->vblank_timer);
+            ati_vga_update_irq(s);
+        }
+        break;
+    case GEN_INT_STATUS:
+        data &= (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF ?
+                 0x000f040fUL : 0xfc080effUL);
+        s->regs.gen_int_status &= ~data;
+        ati_vga_update_irq(s);
+        break;
     case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3:
     {
         uint32_t val = s->regs.crtc_gen_cntl;
@@ -549,12 +611,15 @@ static void ati_mm_write(void *opaque, hwaddr addr,
                                addr - GPIO_MONID, data, size);
             /*
              * Rage128p accesses DDC used to get EDID via these bits.
-             * Only touch i2c when write overlaps 3rd byte because some
-             * drivers access this reg via multiple partial writes and
-             * without this spurious bits would be sent.
+             * Because some drivers access this via multiple byte writes
+             * we have to be careful when we send bits to avoid spurious
+             * changes in bitbang_i2c state. So only do it when mask is set
+             * and either the enable bits are changed or output bits changed
+             * while enabled.
              */
             if ((s->regs.gpio_monid & BIT(25)) &&
-                addr <= GPIO_MONID + 2 && addr + size > GPIO_MONID + 2) {
+                ((addr <= GPIO_MONID + 2 && addr + size > GPIO_MONID + 2) ||
+                 (addr == GPIO_MONID && (s->regs.gpio_monid & 0x60000)))) {
                 s->regs.gpio_monid = ati_i2c(&s->bbi2c, s->regs.gpio_monid, 1);
             }
         }
@@ -580,6 +645,9 @@ static void ati_mm_write(void *opaque, hwaddr addr,
         data >>= 8;
         vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff);
         break;
+    case CNFG_CNTL:
+        s->regs.config_cntl = data;
+        break;
     case CRTC_H_TOTAL_DISP:
         s->regs.crtc_h_total_disp = data & 0x07ff07ff;
         break;
@@ -870,12 +938,19 @@ static void ati_vga_realize(PCIDevice *dev, Error **errp)
     pci_register_bar(dev, 0, PCI_BASE_ADDRESS_MEM_PREFETCH, &vga->vram);
     pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &s->io);
     pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mm);
+
+    /* most interrupts are not yet emulated but MacOS needs at least VBlank */
+    dev->config[PCI_INTERRUPT_PIN] = 1;
+    timer_init_ns(&s->vblank_timer, QEMU_CLOCK_VIRTUAL, ati_vga_vblank_irq, s);
 }
 
 static void ati_vga_reset(DeviceState *dev)
 {
     ATIVGAState *s = ATI_VGA(dev);
 
+    timer_del(&s->vblank_timer);
+    ati_vga_update_irq(s);
+
     /* reset vga */
     vga_common_reset(&s->vga);
     s->mode = VGA_MODE;
@@ -885,6 +960,7 @@ static void ati_vga_exit(PCIDevice *dev)
 {
     ATIVGAState *s = ATI_VGA(dev);
 
+    timer_del(&s->vblank_timer);
     graphic_console_close(s->vga.con);
 }
 
diff --git a/hw/display/ati_dbg.c b/hw/display/ati_dbg.c
index 88b3a11..0ebbd36 100644
--- a/hw/display/ati_dbg.c
+++ b/hw/display/ati_dbg.c
@@ -16,6 +16,7 @@ static struct ati_regdesc ati_reg_names[] = {
     {"BUS_CNTL", 0x0030},
     {"BUS_CNTL1", 0x0034},
     {"GEN_INT_CNTL", 0x0040},
+    {"GEN_INT_STATUS", 0x0044},
     {"CRTC_GEN_CNTL", 0x0050},
     {"CRTC_EXT_CNTL", 0x0054},
     {"DAC_CNTL", 0x0058},
@@ -23,11 +24,20 @@ static struct ati_regdesc ati_reg_names[] = {
     {"GPIO_DVI_DDC", 0x0064},
     {"GPIO_MONID", 0x0068},
     {"I2C_CNTL_1", 0x0094},
+    {"AMCGPIO_MASK_MIR", 0x009c},
+    {"AMCGPIO_A_MIR", 0x00a0},
+    {"AMCGPIO_Y_MIR", 0x00a4},
+    {"AMCGPIO_EN_MIR", 0x00a8},
     {"PALETTE_INDEX", 0x00b0},
     {"PALETTE_DATA", 0x00b4},
     {"CNFG_CNTL", 0x00e0},
     {"GEN_RESET_CNTL", 0x00f0},
     {"CNFG_MEMSIZE", 0x00f8},
+    {"CONFIG_APER_0_BASE", 0x0100},
+    {"CONFIG_APER_1_BASE", 0x0104},
+    {"CONFIG_APER_SIZE", 0x0108},
+    {"CONFIG_REG_1_BASE", 0x010c},
+    {"CONFIG_REG_APER_SIZE", 0x0110},
     {"MEM_CNTL", 0x0140},
     {"MC_FB_LOCATION", 0x0148},
     {"MC_AGP_LOCATION", 0x014C},
diff --git a/hw/display/ati_int.h b/hw/display/ati_int.h
index 31a1927..2a16708 100644
--- a/hw/display/ati_int.h
+++ b/hw/display/ati_int.h
@@ -9,6 +9,7 @@
 #ifndef ATI_INT_H
 #define ATI_INT_H
 
+#include "qemu/timer.h"
 #include "hw/pci/pci.h"
 #include "hw/i2c/bitbang_i2c.h"
 #include "vga_int.h"
@@ -33,12 +34,15 @@
 typedef struct ATIVGARegs {
     uint32_t mm_index;
     uint32_t bios_scratch[8];
+    uint32_t gen_int_cntl;
+    uint32_t gen_int_status;
     uint32_t crtc_gen_cntl;
     uint32_t crtc_ext_cntl;
     uint32_t dac_cntl;
     uint32_t gpio_vga_ddc;
     uint32_t gpio_dvi_ddc;
     uint32_t gpio_monid;
+    uint32_t config_cntl;
     uint32_t crtc_h_total_disp;
     uint32_t crtc_h_sync_strt_wid;
     uint32_t crtc_v_total_disp;
@@ -88,6 +92,7 @@ typedef struct ATIVGAState {
     uint16_t cursor_size;
     uint32_t cursor_offset;
     QEMUCursor *cursor;
+    QEMUTimer vblank_timer;
     bitbang_i2c_interface bbi2c;
     MemoryRegion io;
     MemoryRegion mm;
diff --git a/hw/display/ati_regs.h b/hw/display/ati_regs.h
index d7155c9..ebd37ee 100644
--- a/hw/display/ati_regs.h
+++ b/hw/display/ati_regs.h
@@ -34,6 +34,7 @@
 #define BUS_CNTL                                0x0030
 #define BUS_CNTL1                               0x0034
 #define GEN_INT_CNTL                            0x0040
+#define GEN_INT_STATUS                          0x0044
 #define CRTC_GEN_CNTL                           0x0050
 #define CRTC_EXT_CNTL                           0x0054
 #define DAC_CNTL                                0x0058
@@ -41,11 +42,20 @@
 #define GPIO_DVI_DDC                            0x0064
 #define GPIO_MONID                              0x0068
 #define I2C_CNTL_1                              0x0094
+#define AMCGPIO_MASK_MIR                        0x009c
+#define AMCGPIO_A_MIR                           0x00a0
+#define AMCGPIO_Y_MIR                           0x00a4
+#define AMCGPIO_EN_MIR                          0x00a8
 #define PALETTE_INDEX                           0x00b0
 #define PALETTE_DATA                            0x00b4
 #define CNFG_CNTL                               0x00e0
 #define GEN_RESET_CNTL                          0x00f0
 #define CNFG_MEMSIZE                            0x00f8
+#define CONFIG_APER_0_BASE                      0x0100
+#define CONFIG_APER_1_BASE                      0x0104
+#define CONFIG_APER_SIZE                        0x0108
+#define CONFIG_REG_1_BASE                       0x010c
+#define CONFIG_REG_APER_SIZE                    0x0110
 #define MEM_CNTL                                0x0140
 #define MC_FB_LOCATION                          0x0148
 #define MC_AGP_LOCATION                         0x014C
@@ -307,7 +317,14 @@
 #define XPLL_FB_DIV_MASK                        0x0000FF00
 #define X_MPLL_REF_DIV_MASK                     0x000000FF
 
+/* GEN_INT_CNTL) */
+#define CRTC_VBLANK_INT                         0x00000001
+#define CRTC_VLINE_INT                          0x00000002
+#define CRTC_VSYNC_INT                          0x00000004
+
 /* Config control values (CONFIG_CNTL) */
+#define APER_0_ENDIAN                           0x00000003
+#define APER_1_ENDIAN                           0x0000000c
 #define CFG_VGA_IO_DIS                          0x00000400
 
 /* CRTC control values (CRTC_GEN_CNTL) */