| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
bfd/
* bfd-in.h: Move m68k function declaration..
* cpu-m68k.h: ..to here, new file..
* elf32-m68k.h: ..and here, new file.
* elf32-m68k.c: Include cpu-m68k.h and elf32-m68k.h.
* bfd-in2.h: Regenerate.
ld/
* emultempl/m68kelf.em: Include elf32-m68k.h.
opcodes/
* m68k-dis.c: Include cpu-m68k.h
|
|
bfd/
* bfd-in.h: Move mips function declaration to..
* elfxx-mips.h: ..here.
* bfd-in2.h: Regenerate.
opcodes/
* mips-dis.c: Include elfxx-mips.h. Move "elf-bfd.h" and
"elf/mips.h" earlier.
|
|
Commit 21df382b91 ("x86: fold SReg{2,3}") went too far: Folding 64-bit
PUSH/POP templates into non-64-bit ones isn't correct, due to the
different operand widths, and hence suffixes permitted. Restore the
separate templates.
Add tests of PUSH/POP with q suffix and %fs/%gs operands to the
testsuite. While doing so also add PUSHF/POPF ones _without_ suffix.
|
|
This large patch removes the unnecessary bfd parameter from various
bfd section macros and functions. The bfd is hardly ever used and if
needed for the bfd_set_section_* or bfd_rename_section functions can
be found via section->owner except for the com, und, abs, and ind
std_section special sections. Those sections shouldn't be modified
anyway.
The patch also removes various bfd_get_section_<field> macros,
replacing their use with bfd_section_<field>, and adds
bfd_set_section_lma. I've also fixed a minor bug in gas where
compressed section renaming was done directly rather than calling
bfd_rename_section. This would have broken bfd_get_section_by_name
and similar functions, but that hardly mattered at such a late stage
in gas processing.
bfd/
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
(bfd_get_section_lma, bfd_get_section_alignment),
(bfd_get_section_size, bfd_get_section_flags),
(bfd_get_section_userdata): Delete.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
(bfd_section_flags, bfd_section_userdata): New.
(bfd_is_com_section): Rename parameter.
* section.c (bfd_set_section_userdata, bfd_set_section_vma),
(bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
(bfd_set_section_size): Delete bfd parameter, rename section parameter.
(bfd_set_section_lma): New.
* bfd-in2.h: Regenerate.
* mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
update callers.
* aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
* elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
* elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
* elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
* elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
* elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
* mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
* peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
* xcofflink.c: Update throughout for bfd section macro and function
changes.
binutils/
* addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
* objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
* od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
* resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
throughout for bfd section macro and function changes.
gas/
* as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
* read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
* config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
* config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
* config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
* config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
* config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
* config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
* config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
* config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
* config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
* config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
* config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
* config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
* config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
* config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
* config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
* config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
bfd section macro and function changes.
* write.c (compress_debug): Use bfd_rename_section.
gdb/
* aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
* coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
* dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
* exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
* hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
* i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
* maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
* mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
* objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
* ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
* rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
* s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
* solib-spu.c, * solib-svr4.c, * solib-target.c,
* spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
* symmisc.c, * symtab.c, * target.c, * windows-nat.c,
* xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
* mi/mi-interp.c: Update throughout for bfd section macro and
function changes.
* gcore (gcore_create_callback): Use bfd_set_section_lma.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
gprof/
* corefile.c, * symtab.c: Update throughout for bfd section
macro and function changes.
ld/
* ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
* emultempl/aarch64elf.em, * emultempl/aix.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/cr16elf.em, * emultempl/cskyelf.em,
* emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
* emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
throughout for bfd section macro and function changes.
libctf/
* ctf-open-bfd.c: Update throughout for bfd section macro changes.
opcodes/
* arc-ext.c: Update throughout for bfd section macro changes.
sim/
* common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
* erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
* m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
* rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
* rx/trace.c: Update throughout for bfd section macro changes.
|
|
I get some spurious changes when running autoconf/automake for various
projects in the tree. This is likely because they were generated using
distro-patched tools last time.
I ran `autoreconf -f` in the various automake projects of the
binutils-gdb tree, and this is the result. The tools I am using have
been compiled from source, from the upstream release.
bfd/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gas/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gold/ChangeLog:
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
ld/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
opcodes/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
|
|
Generalize opcode arch dependencies so that we can support the
overlapping B extension Zb* subsets.
2019-09-17 Maxim Blinov <maxim.blinov@embecosm.com>
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle
insn_class enum rather than subset char string.
(riscv_ip): Update call to riscv_multi_subset_supports.
include/
* opcode/riscv.h (riscv_insn_class): New enum.
* opcode/riscv.h (struct riscv_opcode): Change
subset field to insn_class field.
opcodes/
* riscv-opc.c (riscv_opcodes): Change subset field
to insn_class field for all instructions.
(riscv_insn_types): Likewise.
|
|
|
|
PR 24982
* m68k-opc.c: Correct aliases for tdivsl and tdivul.
|
|
|
|
PR 24961
* tic30-dis.c (get_indirect_operand): Check for bufcnt being
greater than zero before indexing via (bufcnt -1).
|
|
corrupt input file.
PR 24958
* mmix-dis.c (MAX_REG_NAME_LEN): Define.
(MAX_SPEC_REG_NAME_LEN): Define.
(struct mmix_dis_info): Use defined constants for array lengths.
(get_reg_name): New function.
(get_sprec_reg_name): New function.
(print_insn_mmix): Use new functions.
|
|
instruction copies the value of one vector register to another vector register. The patch also modifies the decoding of VORR instruction which is effecting decoding of VMOV instruction.
gas * config/tc-arm.c (parse_neon_mov): Add check to accept vector
register to both the arguments in VMOV instruction.
* testsuite/gas/arm/mve-vmov-1.d: Modify.
* testsuite/gas/arm/mve-vmov-1.s: Likewise.
* testsuite/gas/arm/mve-vorr.d: Likewise.
opcodes * arm-dis.c (mve_opcodes): Add entry for MVE_VMOV_VEC_TO_VEC.
(is_mve_undefined): Add case for MVE_VMOV_VEC_TO_VEC.
(print_insn_mve): Add condition to check Qm==Qn of VORR instruction.
|
|
The MTE specification adjusted the encoding of the TFSRE0_EL1, TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12 system registers.
This patch brings binutils up to date.
The references for the encodings are at:
https://developer.arm.com/docs/ddi0595/latest/aarch64-system-registers/tfsre0_el1 (also contains TFSR_EL12 description)
https://developer.arm.com/docs/ddi0595/latest/aarch64-system-registers/tfsr_el1
https://developer.arm.com/docs/ddi0595/latest/aarch64-system-registers/tfsr_el2
https://developer.arm.com/docs/ddi0595/latest/aarch64-system-registers/tfsr_el3
Tested check-gas for aarch64-none-elf.
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Update encoding of tfsre0_el1,
tfsr_el1, tfsr_el2, tfsr_el3, tfsr_el12.
(aarch64_sys_reg_supported_p): Update checks for the above.
gas/
* testsuite/gas/aarch64/sysreg-4.d: Update expected disassembly for
tfsre0_el1, tfsr_el1, tfsr_el2, tfsr_el3, tfsr_el12 system registers.
|
|
This is a change to the first published specifications [1][a] but since there is no hardware
out there that uses the old instructions we do not want to support the old variant.
This changes are done based on the latest published specifications [1][b].
[1] https://developer.arm.com/architectures/cpu-architecture/m-profile/docs/ddi0553/latest/armv81-m-architecture-reference-manual
[a] version bf
[b] version bh
gas * config/tc-arm.c (enum operand_parse_code): Add the entry OP_I48_I64.
(po_imm1_or_imm2_or_fail): Marco to check the immediate is either of
48 or 64.
(parse_operands): Add case OP_I48_I64.
(do_mve_scalar_shift1): Add function to encode the MVE shift
instructions with 4 arguments.
* testsuite/gas/arm/mve-shift-bad.l: Modify.
* testsuite/gas/arm/mve-shift-bad.s: Likewise.
* testsuite/gas/arm/mve-shift.d: Likewise.
* testsuite/gas/arm/mve-shift.s: Likewise.
opcodes * arm-dis.c (struct mopcode32 mve_opcodes): Modify the mask for
cases MVE_SQRSHRL and MVE_UQRSHLL.
(print_insn_mve): Add case for specifier 'k' to check
specific bit of the instruction.
|
|
ARC binary file.
PR 24854
* arc-dis.c (arc_insn_length): Return 0 rather than aborting when
encountering an unknown machine type.
(print_insn_arc): Handle arc_insn_length returning 0. In error
cases return -1 rather than calling abort.
|
|
The flag is supposed to be used in templates which allow for both a
"short" and a "long" format memory operand. Drop it from templates not
matching this pattern. In the control/status word cases it was (ab)used
in place of the intended IgnoreSize.
|
|
VQ(R)DMLAH and VQ(R)DMLASH MVE instructions.
Previously GAS would accept .u32, .u16 and .u8 suffixes to the VQ(R)DMLAH and VQ(R)DMLASH
instructions, however the Armv8.1-M Mainline specification states that these functions only
have signed variations (.s32, .s16 and .s8 suffixes).
This is documented here:
https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf?_ga=2.143079093.1892401233.1563295591-999473562.1560847439#page=1183
gas * config/tc-arm.c (do_mve_vqdmlah): Use N_S_32 macro.
(do_neon_qrdmlah): Use N_S_32 macro.
* testsuite/gas/arm/mve-vqdmlah-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlah.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlah.s: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlash.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash.s: Remove unsigned instruction tests.
opcodes * arm-dis.c: Only accept signed variants of VQ(R)DMLAH and VQ(R)DMLASH
instructions.
|
|
Mel Chen <mel.chen@sifive.com>
gas/
* testsuite/gas/riscv/alias-csr.s: Add testcase for CSR-access
alias instructions.
* testsuite/gas/riscv/no-aliases-csr.d: Run testcase alias-csr.s with
-Mno-aliases.
* testsuite/gas/riscv/alias-csr.d: Run testcase alias-csr.s.
* testsuite/gas/riscv/priv-reg.d: Update.
opcodes/
* riscv-opc.c (riscv_opcodes): Set frsr, fssr, frcsr, fscsr, frrm,
fsrm, fsrmi, frflags, fsflags, fsflagsi to alias instructions.
* riscv-opc.c (riscv_opcodes): Adjust order of frsr, frcsr, fssr,
fscsr.
|
|
New instruction are added, and some of them are overlapping. Update
disassembler to correctly recognize them. Introduce nps400 option.
opcodes/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (skip_this_opcode): Check also for 0x07 major opcodes,
and MPY class instructions.
(parse_option): Add nps400 option.
(print_arc_disassembler_options): Add nps400 info.
gas/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/nps400-6.d: Update test.
|
|
Update ARC opcode table by cleaning up invalid instructions, and fixing wrong encodings.
opcodes/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* arc-ext-tbl.h (bspeek): Remove it, added to main table.
(bspop): Likewise.
(modapp): Likewise.
* arc-opc.c (RAD_CHK): Add.
* arc-tbl.h: Regenerate.
include/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* include/opcode/arc.h (FASTMATH): Add.
(SWITCH): Likewise.
|
|
We're missing support for the GMID_EL1 system register from the Memory Tagging Extension in binutils.
This is specified at:
https://developer.arm.com/docs/ddi0595/latest/aarch64-system-registers/gmid_el1
This simple patch adds the support for this read-only register.
Tested make check on gas.
|
|
2019-07-22 Barnaby Wilks <barnaby.wilks@arm.com>
* arm-dis.c (is_mve_unpredictable): Stop marking some MVE
instructions as UNPREDICTABLE.
|
|
This patch changes the eBPF CPU description to prefer the register
names %r0 and %r6 instead of %a and %ctx when disassembling. This
matches better with the current practice, vs. cBPF.
It also updates the GAS tests in order to reflect this change.
Tested in a x86_64 host.
cpu/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (h-gpr): when disassembling, use %r0 and %r6 instead of
%a and %ctx.
opcodes/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerated.
gas/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/alu.d: Use %r6 instead of %ctx.
* testsuite/gas/bpf/lddw-be.d: Likewise.
* testsuite/gas/bpf/lddw.d: Likewise.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise.
|
|
This was supposed to also be removed by c48dadc9a8 ('x86: drop "mem"
operand type attribute'). It's odd enough that this hasn't caused
build issues, considering the careful use of OTunused (apparently to
avoid "missing initializer" warnings).
To avoid such happening again introduce compile time consistency
checks.
|
|
... instead of an operand type bit: It's an insn property, not an
operand one. There's just one actual change to be made to the
templates: Most are now required to have the (unswapped) destination go
into ModR/M.rm, so VMOVD template needs its opcode adjusted accordingly
and its operands swapped. {,V}MOVS{S,D}, otoh, are left alone in this
regard, as otherwise generated code would differ from what we've been
producing so far (which I don't think is wanted).
Take the opportunity and add a missing IgnoreSize to pextrb (leading to
an error in 16-bit mode), and take the liberty to once again drop stray
IgnoreSize attributes from lines changed and neighboring related ones.
|
|
They're the only exception to there generally being no mix of register
kinds possible in an insn operand template, and there being two bits per
operand for their representation is also quite wasteful, considering the
low number of uses. Fold both bits and deal with the little bit of
fallout.
Also take the liberty and drop dead code trying to set REX_B: No segment
register has RegRex set on it.
Additionally I was quite surprised that PUSH/POP with the permitted
segment registers is not covered by the test cases. Add the missing
pieces.
|
|
This patch fixes the eBPF CPU description in order to reflect the
right explicit arguments passed to the ldabs{b,h,w,dw} instructions,
updates the corresponding GAS tests, and updates the BPF section of
the GAS manual.
cpu/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlabs): New pmacro.
(dlind): Likewise.
opcodes/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
gas/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: ldabs instructions do not take a `src'
register as an argument.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
* doc/c-bpf.texi (BPF Opcodes): Update to reflect the correct
explicit arguments to ldabs and ldind instructions.
|
|
The eBPF non-generic load instructions ldind{b,h,w,dw} and
ldabs{b,h,w,dw} do not take an explicit destination register as an
argument. Instead, they put the loaded value in %r0, implicitly.
This patch fixes the CPU BPF description to not expect a 'dst'
argument in these arguments, regenerates the corresponding files in
opcodes, and updates the impacted GAS tests.
Tested in a x86-64 host.
cpu/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlsi): ldabs and ldind instructions do not take an
explicit 'dst' argument.
opcodes/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
gas/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: Do not use explicit arguments for
ldabs and ldind instructions.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
|
|
Older gcc warns, arguably incorrectly, about name collisions between
global functions and function-local variable names. Consesus has been
to rename local variables whenever this is spotted, hence committed as
obvious. Note the pre-existing variable named idx; "index_operand"
seemed logical given the context.
* arm-dis.c (print_insn_coprocessor): Rename index to
index_operand.
|
|
From Kito Cheng <kito.cheng@sifive.com>
gas/ChangeLog
* doc/c-riscv.texi (Instruction Formats): Add r4 type.
* testsuite/gas/riscv/insn.d: Add testcase for r4 type.
* testsuite/gas/riscv/insn.s: Ditto.
* doc/c-riscv.texi (Instruction Formats): Add b and j type.
* testsuite/gas/riscv/insn.d: Add test case for b and j type.
* testsuite/gas/riscv/insn.s: Ditto.
* testsuite/gas/riscv/insn.s: Correct instruction type for load
and store.
* testsuite/gas/riscv/insn.d: Using regular expression to match
address.
* doc/c-riscv.texi (Instruction Formats): Fix encoding table for SB
type and fix typo.
opcode/ChangeLog
* riscv-opc.c (riscv_insn_types): Add r4 type.
* riscv-opc.c (riscv_insn_types): Add b and j type.
* opcodes/riscv-opc.c (riscv_insn_types): Remove incorrect
format for sb type and correct s type.
|
|
The entry for the FMOV alias of FCPY was missing C_SCAN_MOVPRFX.
(The entry for FCPY itself was OK.)
This was the only /m-predicated instruction I could see that was
missing the flag.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode): Set C_SCAN_MOVPRFX for the
SVE FMOV alias of FCPY.
gas/
* testsuite/gas/aarch64/sve-movprfx_27.s,
* testsuite/gas/aarch64/sve-movprfx_27.d: New test.
|
|
SVE FCVTZS, FCVTZU, SCVTF and UCVTF need the same treatment as FCVT:
the register size used in a predicated MOVPRFX must be the wider of
the destination and source sizes.
Since I was adding a (supposedly) complete set of tests for converts,
it seemed more consistent to add a complete set of tests for shifts
as well, even though there's no bug to fix there.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Add C_MAX_ELEM flags
to SVE fcvtzs, fcvtzu, scvtf and ucvtf entries.
gas/
* testsuite/gas/aarch64/sve-movprfx_26.s: Also test FCVTZS, FCVTZU,
SCVTF, UCVTF, LSR and ASR.
* testsuite/gas/aarch64/sve-movprfx_26.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_26.l: Likewise.
|
|
One of the MOVPRFX tests has:
output register of preceding `movprfx' used as input at operand 3 -- `cpy z1.d,p1/m,x1'
But X1 and Z1 are not the same register, so the instruction is
actually OK.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-opc.c (verify_constraints): Skip GPRs when scanning the
registers in an instruction prefixed by MOVPRFX.
gas/
* testsuite/gas/aarch64/sve-movprfx_25.s: Allow CPY Z1.D.P1/M,X1
to be prefixed by MOVPRFX.
* testsuite/gas/aarch64/sve-movprfx_25.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_25.l: Likewise.
|
|
I had mistakenly given all variants of the new SVE2 instructions
pmull{t,b} a dependency on the feature +sve2-aes.
Only the variant specifying .Q -> .D sizes should have that
restriction.
This patch fixes that mistake and updates the testsuite to have extra
tests (matching the given set of tests per line in aarch64-tbl.h that
the rest of the SVE2 tests follow).
We also add a line in the documentation of the command line to clarify
how to enable `pmull{t,b}` of this larger size. This is needed because
all other instructions gated under the `sve2-aes` architecture extension
are marked in the instruction documentation by an `HaveSVE2AES` check
while pmull{t,b} is gated under the `HaveSVE2PMULL128` check.
Regtested targeting aarch64-linux.
gas/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests.
* testsuite/gas/aarch64/illegal-sve2.l: Update tests.
* doc/c-aarch64.texi: Add special note of pmull{t,b}
instructions under the sve2-aes architecture extension.
* testsuite/gas/aarch64/illegal-sve2.s: Add small size
pmull{t,b} instructions.
* testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b}
disassembly.
* testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b}
instructions.
include/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): sve_size_013
renamed to sve_size_13.
opcodes/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier.
(OP_SVE_VVV_Q_D): Add new qualifier.
(OP_SVE_VVV_QHD_DBS): Remove now unused qualifier.
(struct aarch64_opcode): Split pmull{t,b} into those requiring
AES and those not.
|
|
It is pretty wasteful to have a per-operand flag which is used in
exactly 4 cases. It can be relatively easily replaced, and by doing so
I've actually found some dead code to remove at the same time (there's
no case of ImmExt set at the same time as Vec_Imm4).
|
|
In quite a few cases ImmExt gets used when there's not really any
immediate, but rather a degenerate ModR/M byte. ENCL{S,U} show how this
case is supposed to be dealt with. Eliminate most abuses, leaving in
place (for now) only ones where process_immext() is involved.
|
|
It seems to be not uncommon for people to use AND or OR in this form for
just setting the status flags. TEST, which doesn't write to any
register other than EFLAGS, ought to be preferred. Make the change only
for -O2 and above though, at least for now.
|
|
When they're in the 0F opcode space, swapping their source operands may
allow switching from 3-byte to 2-byte VEX prefix encoding. Note that NaN
behavior precludes us doing so for many packed and scalar floating point
insns; such an optimization would need to be done by the compiler
instead in this case, when it knows that NaN-s have undefined behavior
anyway.
While for explicitly specified AVX/AVX2 insns the optimization (for now
at least) gets done only for -O2 and -Os, it is utilized by default in
SSE2AVX mode, as there we're re-writing the programmer's specified insns
anyway.
Rather than introducing a new attribute flag, the change re-uses one
which so far was meaningful only for EVEX-encoded insns.
|
|
As long as there's no write mask as well as no broadcast, and as long
as the scaled Disp8 wouldn't result in a shorter EVEX encoding, encode
VPAND{D,Q}, VPANDN{D,Q}, VPOR{D,Q}, and VPXOR{D,Q} acting on only the
lower 16 XMM/YMM registers using their VEX equivalents with -O1.
Also take the opportunity and avoid looping twice over all operands
when dealing with memory-with-displacement ones.
|
|
While the ISA extensions doc suggests them to be made available just
like the SDM does for the PCLMULQDQ ISA extension, these weren't added
when supposrt for the new extension was introduced.
Also make sure the 64-bit non-AVX512 test actually tests VEX encodings,
not EVEX ones.
|
|
In commit dc821c5f9a ("x86: replace Reg8, Reg16, Reg32, and Reg64") I
apparently blindly copied the original register/memory templates into
separate ones, in particular without removing the Disp8MemShift which
are applicable to templates with memory operands only.
|
|
Just like their AVX counterparts they can utilize XMVexScalar /
EXdVexScalarS / EXqVexScalarS taking care of dropping the middle operand
for their memory forms.
|
|
|
|
Since not all vector lengths are supported by scatter/gather prefetch
instructions, decode them only with supported vector lengths.
gas/
PR binutils/24719
* testsuite/gas/i386/disassem.s: Add test for vgatherpf0dps
with invalid vector length.
* testsuite/gas/i386/x86-64-disassem.s: Likewise.
* testsuite/gas/i386/disassem.d: Updated.
* testsuite/gas/i386/x86-64-disassem.d: Likewise.
opcodes/
PR binutils/24719
* i386-dis-evex-len.h: Add EVEX_LEN_0F38C6_REG_1_PREFIX_2,
EVEX_LEN_0F38C6_REG_2_PREFIX_2, EVEX_LEN_0F38C6_REG_5_PREFIX_2,
EVEX_LEN_0F38C6_REG_6_PREFIX_2, EVEX_LEN_0F38C7_R_1_P_2_W_0,
EVEX_LEN_0F38C7_R_1_P_2_W_1, EVEX_LEN_0F38C7_R_2_P_2_W_0,
EVEX_LEN_0F38C7_R_2_P_2_W_1, EVEX_LEN_0F38C7_R_5_P_2_W_0,
EVEX_LEN_0F38C7_R_5_P_2_W_1, EVEX_LEN_0F38C7_R_6_P_2_W_0 and
EVEX_LEN_0F38C7_R_6_P_2_W_1.
* i386-dis-evex-prefix.h: Update PREFIX_EVEX_0F38C6_REG_1,
PREFIX_EVEX_0F38C6_REG_2, PREFIX_EVEX_0F38C6_REG_5 and
PREFIX_EVEX_0F38C6_REG_6 entries.
* i386-dis-evex-w.h: Update EVEX_W_0F38C7_R_1_P_2,
EVEX_W_0F38C7_R_2_P_2, EVEX_W_0F38C7_R_5_P_2 and
EVEX_W_0F38C7_R_6_P_2 entries.
* i386-dis.c: Add EVEX_LEN_0F38C6_REG_1_PREFIX_2,
EVEX_LEN_0F38C6_REG_2_PREFIX_2, EVEX_LEN_0F38C6_REG_5_PREFIX_2,
EVEX_LEN_0F38C6_REG_6_PREFIX_2, EVEX_LEN_0F38C7_R_1_P_2_W_0,
EVEX_LEN_0F38C7_R_1_P_2_W_1, EVEX_LEN_0F38C7_R_2_P_2_W_0,
EVEX_LEN_0F38C7_R_2_P_2_W_1, EVEX_LEN_0F38C7_R_5_P_2_W_0,
EVEX_LEN_0F38C7_R_5_P_2_W_1, EVEX_LEN_0F38C7_R_6_P_2_W_0 and
EVEX_LEN_0F38C7_R_6_P_2_W_1 enums.
|
|
There's no point doing a separate decode of the VEX.L bit - both decoded
forms are identical.
|
|
These encodings aren't valid in real and VM86 modes, but they are very
well usable in 16-bit protected mode.
A few adjustments in the disassembler tables are needed where Ev or Gv
were wrongly used. Additionally an adjustment is needed to avoid
printing "addr32" when that's already recognizable by the use of %eiz.
Furthermore the Iq operand template was wrong for XOP:0Ah encoding
insns: They're having a uniform 32-bit immediate. Drop Iq and introduce
Id instead.
Clone a few existing test cases to exercise assembler and disassembler.
|
|
Without the ELF header to set info->endian, it ends up as BFD_UNKNOWN_ENDIAN
which gets printed as big-endian. But RISC-V instructions are always little
endian, so we can set endian_code correctly, and then set display_endian from
that. This is similar to how the aarch64 support works, but without the
support for constant pools, as we don't have that on RISC-V.
opcodes/
PR binutils/24739
* riscv-dis.c (riscv_disasemble_insn): Set info->endian_code.
Set info->display_endian to info->endian_code.
|
|
For quite some time we've been using combinations of bits for
specifying various registers in operands and templates. I think it was
Alan who had indicated that likely the debug printing would need
adjustment as a result. Here we go.
Accumulator handling for GPRs gets changed to match that for FPU regs.
For this to work, OPERAND_TYPE_ACC{32,64} get repurposed, with their
original uses replaced by direct checks of the two bits of interest,
which is cheaper than operand_type_equal() invocations.
For SIMD registers nothing similar appears to be needed, as respective
operands get stripped from the (copy of the) template before pt() is
reached.
The type change on pi() is to silence a compiler diagnostic. Arguably
its other parameter could also be const-qualified.
|
|
I assume this mode was needed when EVEX.W handling wasn't really correct
yet for other than 64-bit mode. It's clearly not needed anymore. Its
elimination also allows dropping the EVEX.W split of VCVT{,U}SI2SS. (For
the record, the dropped mode would have been wrong if used in any table
entry not already guaranteeing EVEX.W=1.)
|
|
The only meaningful difference from OP_I() is the handling of the
VEX.W=1 case in 64-bit mode for bytemode being v_mode. Funnel
everything else into OP_I(), and drop no longer needed local
variables.
|
