| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
DBNZ instruction decrements its source register operand, and if
the result is non-zero it branches to the location defined by a signed
half-word displacement operand.
DBNZ instruction is in BRANCH class as other branch instrucitons
like B, Bcc, etc. However, DBNZ is the only branch instruction
that stores a branch offset in the second operand. Thus it must
be placed in a distinct class and treated differently.
For example, current logic of arc_insn_get_branch_target in GDB
assumes that a branch offset is always stored in the first operand
for BRANCH class and it's wrong for DBNZ.
include/ChangeLog:
2024-02-14 Yuriy Kolerov <ykolerov@synopsys.com>
* opcode/arc.h (enum insn_class_t): Add DBNZ class.
opcodes/ChangeLog:
2024-02-14 Yuriy Kolerov <ykolerov@synopsys.com>
* arc-tbl.h (dbnz): Use "DBNZ" class.
* arc-dis.c (arc_opcode_to_insn_type): Handle "DBNZ" class.
gas/ChangeLog:
2024-02-14 Yuriy Kolerov <ykolerov@synopsys.com>
* config/tc-arc.c (is_br_jmp_insn_p): Add check against "DBNZ".
|
|
binutils * readelf.c (get_segment_type): Handle PT_OPENBSD_SYSCALLS segment type.
include * elf/common.h (PT_OPENBSD_SYSCALLS): Define.
|
|
For
add %reg1, name@gottpoff(%rip), %reg2
and
add name@gottpoff(%rip), %reg1, %reg2
add
#define R_X86_64_CODE_6_GOTTPOFF 50
if the instruction starts at 6 bytes before the relocation offset.
They are similar to R_X86_64_GOTTPOFF. Linker can covert GOTTPOFF to
add $name@tpoff, %reg1, %reg2
Rewrite fx_tcbit, fx_tcbit2 and fx_tcbit3 usage to generate
R_X86_64_GOTPCRELX, R_X86_64_REX_GOTPCRELX, R_X86_64_CODE_4_GOTPCRELX,
R_X86_64_CODE_4_GOTTPOFF, R_X86_64_CODE_4_GOTPC32_TLSDESC and
R_X86_64_CODE_6_GOTTPOFF.
NB: There is no need to check BFD_RELOC_X86_64_CODE_4_GOTTPOFF in
md_assemble since there is only BFD_RELOC_X86_64_GOTTPOFF at this
stage, which will be converted to BFD_RELOC_X86_64_CODE_4_GOTTPOFF
or BFD_RELOC_X86_64_CODE_6_GOTTPOFF in i386_validate_fix.
5 relocations:
#define R_X86_64_CODE_5_GOTPCRELX 46
#define R_X86_64_CODE_5_GOTTPOFF 47
#define R_X86_64_CODE_5_GOTPC32_TLSDESC 48
#define R_X86_64_CODE_6_GOTPCRELX 49
#define R_X86_64_CODE_6_GOTPC32_TLSDESC 51
are added for completeness and they are unused.
bfd/
* elf64-x86-64.c (x86_64_elf_howto_table): Add
R_X86_64_CODE_5_GOTPCRELX, R_X86_64_CODE_5_GOTTPOFF,
R_X86_64_CODE_5_GOTPC32_TLSDESC, R_X86_64_CODE_6_GOTPCRELX,
R_X86_64_CODE_6_GOTTPOFF and R_X86_64_CODE_6_GOTPC32_TLSDESC.
(R_X86_64_standard): Updated.
(x86_64_reloc_map): Add R_X86_64_CODE_5_GOTPCRELX,
R_X86_64_CODE_5_GOTTPOFF, R_X86_64_CODE_5_GOTPC32_TLSDESC,
R_X86_64_CODE_6_GOTPCRELX, R_X86_64_CODE_6_GOTTPOFF and
R_X86_64_CODE_6_GOTPC32_TLSDESC.
(elf_x86_64_check_tls_transition): Handle
R_X86_64_CODE_6_GOTTPOFF.
(elf_x86_64_tls_transition): Likewise.
(elf_x86_64_scan_relocs): Handle R_X86_64_CODE_6_GOTTPOFF.
Issue an error for R_X86_64_CODE_5_GOTPCRELX,
R_X86_64_CODE_5_GOTTPOFF, R_X86_64_CODE_5_GOTPC32_TLSDESC,
R_X86_64_CODE_6_GOTPCRELX and R_X86_64_CODE_6_GOTPC32_TLSDESC.
(elf_x86_64_relocate_section): Handle R_X86_64_CODE_6_GOTTPOFF.
* reloc.c (bfd_reloc_code_real): Add
BFD_RELOC_X86_64_CODE_5_GOTPCRELX,
BFD_RELOC_X86_64_CODE_5_GOTTPOFF,
BFD_RELOC_X86_64_CODE_5_GOTPC32_TLSDESC,
BFD_RELOC_X86_64_CODE_6_GOTPCRELX,
BFD_RELOC_X86_64_CODE_6_GOTTPOFF and
BFD_RELOC_X86_64_CODE_6_GOTPC32_TLSDESC.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
elfcpp/
* x86_64.h (R_X86_64_CODE_5_GOTPCRELX): New.
(R_X86_64_CODE_5_GOTTPOFF): Likewise.
(R_X86_64_CODE_5_GOTPC32_TLSDESC): Likewise.
(R_X86_64_CODE_6_GOTPCRELX): Likewise.
(R_X86_64_CODE_6_GOTTPOFF): Likewise.
(R_X86_64_CODE_6_GOTPC32_TLSDESC): Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_CODE_6_GOTTPOFF.
(md_assemble): Don't check BFD_RELOC_X86_64_CODE_4_GOTTPOFF.
Allow "add %reg1, foo@gottpoff(%rip), %reg2".
(output_disp): Handle BFD_RELOC_X86_64_CODE_6_GOTTPOFF. Rewrite
setting fx_tcbitX bits for BFD_RELOC_X86_64_GOTTPOFF,
BFD_RELOC_X86_64_GOTPC32_TLSDESC and BFD_RELOC_32_PCREL.
(md_apply_fix): Handle BFD_RELOC_X86_64_CODE_6_GOTTPOFF.
(i386_validate_fix): Rewrite fx_tcbitX bit checking for
BFD_RELOC_X86_64_GOTTPOFF, BFD_RELOC_X86_64_GOTPC32_TLSDESC and
BFD_RELOC_32_PCREL.
(tc_gen_reloc): Handle BFD_RELOC_X86_64_CODE_6_GOTTPOFF.
* testsuite/gas/i386/x86-64-gottpoff.d: Updated.
* testsuite/gas/i386/x86-64-gottpoff.s: Add tests for
"add %reg1, foo@gottpoff(%rip), %reg2" and
"add foo@gottpoff(%rip), %reg, %reg2".
gold/
* x86_64.cc (Target_x86_64::optimize_tls_reloc): Handle
R_X86_64_CODE_6_GOTTPOFF.
(Target_x86_64::Scan::get_reference_flags): Likewise.
(Target_x86_64::Scan::local): Likewise.
(Target_x86_64::Scan::global): Likewise.
(Target_x86_64::Relocate::relocate): Likewise.
(Target_x86_64::Relocate::relocate_tls): Likewise.
(Target_x86_64::Relocate::tls_ie_to_le): Handle.
R_X86_64_CODE_6_GOTTPOFF.
* testsuite/x86_64_ie_to_le.s: Add tests for
"add %reg1, foo@gottpoff(%rip), %reg2" and
"add foo@gottpoff(%rip), %reg, %reg2".
* testsuite/x86_64_ie_to_le.sh: Updated.
include/
* elf/x86-64.h (elf_x86_64_reloc_type): Add
R_X86_64_CODE_5_GOTPCRELX, R_X86_64_CODE_5_GOTTPOFF,
R_X86_64_CODE_5_GOTPC32_TLSDESC, R_X86_64_CODE_6_GOTPCRELX,
R_X86_64_CODE_6_GOTTPOFF and R_X86_64_CODE_6_GOTPC32_TLSDESC.
ld/
* testsuite/ld-x86-64/tlsbindesc.s: Add R_X86_64_CODE_6_GOTTPOFF
tests.
* testsuite/ld-x86-64/tlsbindesc.d: Updated.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
|
|
There are no legacy ldind nor ldabs BPF instructions with BPF_SIZE_DW.
For some reason we were (incorrectly) supporting these. This patch
updates the opcodes so the instructions get removed and modifies the
GAS manual and testsuite accordingly.
See discussion at
https://lore.kernel.org/bpf/110aad7a-f8a3-46ed-9fda-2f8ee54dcb89@linux.dev
Tested in bpf-uknonwn-none target, x86-64-linux-gnu host.
include/ChangeLog:
2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/bpf.h (enum bpf_insn_id): Remove BPF_INSN_LDINDDW and
BPF_INSN_LDABSDW instructions.
opcodes/ChangeLog:
2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c (bpf_opcodes): Remove BPF_INSN_LDINDDW and
BPF_INSN_LDABSDW instructions.
gas/ChangeLog:
2024-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* doc/c-bpf.texi (BPF Instructions): There is no indirect 64-bit
load instruction.
(BPF Instructions): There is no absolute 64-bit load instruction.
* testsuite/gas/bpf/mem.s: Update test accordingly.
* testsuite/gas/bpf/mem-be-pseudoc.d: Likewise.
* testsuite/gas/bpf/mem-be.d: Likewise.
* testsuite/gas/bpf/mem-pseudoc.d: Likewise.
* testsuite/gas/bpf/mem-pseudoc.s: Likewise.
* testsuite/gas/bpf/mem.d: Likewise.
* testsuite/gas/bpf/mem.s: Likewise.
|
|
In LoongArch ABI, r22 register can be used as frame pointer or
static register(s9).
Link: https://github.com/loongson/la-abi-specs/blob/release/lapcs.adoc#general-purpose-registers
|
|
Without this patch the r_offset field of struct external_reloc is
uninitialised when using objcopy.
* coff/riscv64.h (SWAP_IN_RELOC_OFFSET): Define.
(SWAP_OUT_RELOC_OFFSET): Define.
|
|
This matches the dependencies in the architecture, in LLVM, and even in the
original Binutils commit message that mistakenly included it only in armv9.4-a.
|
|
m32c/cpu.h defines mem as enum value, which causes GCC 14 to emit
sim/m32c/gdb-if.c: In function ‘sim_read’:
sim/m32c/gdb-if.c:162:33: error: declaration of ‘mem’ shadows a previous local [-Werror=shadow=local]
162 | sim_read (SIM_DESC sd, uint64_t mem, void *buf, uint64_t length)
| ~~~~~~~~~^~~
In file included from ../../binutils-gdb/sim/m32c/gdb-if.c:38:
sim/m32c/cpu.h:83:3: note: shadowed declaration is here
83 | mem,
| ^~~
Fix this by renaming mem to addr in all sim_read and sim_write functions.
Most already used addr instead of mem. In one file, sim/rx/gdb-if.c, this
also meant renaming the local addr variable to vma.
|
|
for explicit object member function mangling.
|
|
|
|
Along with the relevant unit tests and updates to the existing
regression tests, this adds support for the following novel rcpc3
insns:
LDIAPP <Wt1>, <Wt2>, [<Xn|SP>]
LDIAPP <Wt1>, <Wt2>, [<Xn|SP>], #8
LDIAPP <Xt1>, <Xt2>, [<Xn|SP>]
LDIAPP <Xt1>, <Xt2>, [<Xn|SP>], #16
STILP <Wt1>, <Wt2>, [<Xn|SP>]
STILP <Wt1>, <Wt2>, [<Xn|SP>, #-8]!
STILP <Xt1>, <Xt2>, [<Xn|SP>]
STILP <Xt1>, <Xt2>, [<Xn|SP>, #-16]!
LDAPR <Wt>, [<Xn|SP>], #4
LDAPR <Xt>, [<Xn|SP>], #8
STLR <Wt>, [<Xn|SP>, #-4]!
STLR <Xt>, [<Xn|SP>, #-8]!
|
|
The particular choices of address indexing, along with their encoding
for RCPC3 instructions lead to the requirement of a new set of operand
descriptions, along with the relevant inserter/extractor set.
That is, for the integer load/stores, there is only a single valid
indexing offset quantity and offset mode is allowed - The value is
always equivalent to the amount of data read/stored by the
operation and the offset is post-indexed for Load-Acquire RCpc, and
pre-indexed with writeback for Store-Release insns.
This indexing quantity/mode pair is selected by the setting of a
single bit in the instruction. To represent these insns, we add the
following operand types:
- AARCH64_OPND_RCPC3_ADDR_OPT_POSTIND
- AARCH64_OPND_RCPC3_ADDR_OPT_PREIND_WB
In the case of loads and stores involving SIMD/FP registers, the
optional offset is encoded as an 8-bit signed immediate, but neither
post-indexing or pre-indexing with writeback is available. This
created the need for an operand type similar to
AARCH64_OPND_ADDR_OFFSET, with the difference that FLD_index should
not be checked.
We thus introduce the AARCH64_OPND_RCPC3_ADDR_OFFSET operand, a
variant of AARCH64_OPND_ADDR_OFFSET, w/o the FLD_index bitfield.
|
|
Beyond the need to encode any registers involved in data transfer and
the address base register for load/stores, it is necessary to specify
the data register addressing mode and whether the address register is
to be pre/post-indexed, whereby loads may be post-indexed and stores
pre-indexed with write-back.
The use of a single bit to specify both the indexing mode and indexing
value requires a novel function be written to accommodate this for
address operand insertion in assembly and another for extraction in
disassembly, along with the definition of two insn fields for use with
these instructions.
This therefore defines the following functions:
- aarch64_ins_rcpc3_addr_opt_offset
- aarch64_ins_rcpc3_addr_offset
- aarch64_ext_rcpc3_addr_opt_offset
- aarch64_ext_rcpc3_addr_offset
It extends the `do_special_{encoding|decoding}' functions and defines
two rcpc3 instruction fields:
- FLD_opc2
- FLD_rcpc3_size
|
|
The allowed immediate offsets in integer rcpc3 load store instructions
are not encoded explicitly in the instruction itself, being rather
implicitly equivalent to the amount of data loaded/stored by the
instruction.
This leads to the requirement that this quantity be calculated based on
the number of registers involved in the transfer, either as data
source or destination registers and their respective qualifiers.
This is done via `calc_ldst_datasize (const aarch64_opnd_info *opnds)'
implemented here, using a cumulative sum of qualifier sizes preceding
the address operand in the OPNDS operand list argument.
|
|
Indicating the presence of the Armv8.2-a feature adding further
support for the Release Consistency Model, the `+rcpc3' architectural
extension flag is added to the list of possible `-march' options in
Binutils, together with the necessary macro for encoding rcpc3
instructions.
|
|
Add an aarch64_feature_set field to aarch64_sys_ins_reg, and use this for
feature checks instead of testing against a list of operand codes.
|
|
OK for master?
|
|
Hi,
This patch add support for SVE2.1 instructions ld1q,
ld2q, ld3q and ld4q, st1q, st2q, st3q and st4q.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
|
|
Hi,
This patch add support for SVE2.1 instruction dupq, eorqv and extq.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
|
|
Hi,
This patch add support for FEAT_SVE2p1 (SVE2.1 Extension) feature
along with +sve2p1 optional flag to enabe this feature.
Also support for following SVE2p1 instructions is added
addqv, andqv, smaxqv, sminqv, umaxqv, uminqv and uminqv.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
|
|
Hi,
This patch add support for FEAT_SME2p1 and "movaz" instructions
along with the optional flag +sme2p1.
Following "movaz" instructions are add:
Move and zero two ZA tile slices to vector registers.
Move and zero four ZA tile slices to vector registers.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
|
|
Hi,
This patch add support for SVE2.1 and SME2.1 non-widening BFloat16
(FEAT_B16B16) instructions.
Following instructions predicated, unpredicated and indexed
variants are added in this patch.
bfadd, bfclamp, bfmax bfmaxnm, bfmin,bfminnm,
bfmla,bfmls,bfmul and bfsub.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
|
|
Additionally, change FEAT_XS tlbi variants to be gated on "+xs" instead of
"+d128". This is an incremental improvement; there are still some FEAT_XS tlbi
variants that are gated incorrectly or missing entirely.
|
|
|
|
|
|
|
|
This patch adds support for the new AArch64 system registers that are part of the following extensions:
* FEAT_DEBUGv8p9
* FEAT_PMUv3p9
* FEAT_PMUv3_SS
* FEAT_PMUv3_ICNTR
* FEAT_SEBEP
|
|
versions.
This brings in the following commits:
commit c73cc6fe6207b2863afa31a3be8ad87b70d3df0a
Author: Jakub Jelinek <jakub@redhat.com>
Date: Tue Dec 5 23:32:19 2023 +0100
libiberty: Fix build with GCC < 7
Tobias reported on IRC that the linker fails to build with GCC 4.8.5.
In configure I've tried to use everything actually used in the sha1.c
x86 hw implementation, but unfortunately I forgot about implicit function
declarations. GCC before 7 did have <cpuid.h> header and bit_SHA define
and __get_cpuid function defined inline, but it didn't define
__get_cpuid_count, which compiled fine (and the configure test is
intentionally compile time only) due to implicit function declaration,
but then failed to link when linking the linker, because
__get_cpuid_count wasn't defined anywhere.
The following patch fixes that by using what autoconf uses in AC_CHECK_DECL
to make sure the functions are declared.
commit 691858d279335eeeeed3afafdf872b1c5f8f4201
Author: Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
Date: Tue Dec 5 11:04:06 2023 +0100
libiberty: Fix pex_unix_wait return type
The recent warning patches broke Solaris bootstrap:
/vol/gcc/src/hg/master/local/libiberty/pex-unix.c:326:3: error: initialization of 'pid_t (*)(struct pex_obj *, pid_t, int *, struct pex_time *, int, const char **, int *)' {aka 'long int (*)(struct pex_obj *, long int, int *, struct pex_time *, int, const char **, int *)'} from incompatible pointer type 'int (*)(struct pex_obj *, pid_t, int *, struct pex_time *, int, const char **, int *)' {aka 'int (*)(struct pex_obj *, long int, int *, struct pex_time *, int, const char **, int *)'} [-Wincompatible-pointer-types]
326 | pex_unix_wait,
| ^~~~~~~~~~~~~
/vol/gcc/src/hg/master/local/libiberty/pex-unix.c:326:3: note: (near initialization for 'funcs.wait')
While pex_funcs.wait expects a function returning pid_t, pex_unix_wait
currently returns int. However, on Solaris pid_t is long for 32-bit,
but int for 64-bit.
This patches fixes this by having pex_unix_wait return pid_t as
expected, and like every other variant already does.
Bootstrapped without regressions on i386-pc-solaris2.11,
sparc-sun-solaris2.11, x86_64-pc-linux-gnu, and
x86_64-apple-darwin23.1.0.
commit c3f281a0c1ca50e4df5049923aa2f5d1c3c39ff6
Author: Jason Merrill <jason@redhat.com>
Date: Mon Sep 25 10:15:02 2023 +0100
c++: mangle function template constraints
Per https://github.com/itanium-cxx-abi/cxx-abi/issues/24 and
https://github.com/itanium-cxx-abi/cxx-abi/pull/166
We need to mangle constraints to be able to distinguish between function
templates that only differ in constraints. From the latter link, we want to
use the template parameter mangling previously specified for lambdas to also
make explicit the form of a template parameter where the argument is not a
"natural" fit for it, such as when the parameter is constrained or deduced.
I'm concerned about how the latter link changes the mangling for some C++98
and C++11 patterns, so I've limited template_parm_natural_p to avoid two
cases found by running the testsuite with -Wabi forced on:
template <class T, T V> T f() { return V; }
int main() { return f<int,42>(); }
template <int i> int max() { return i; }
template <int i, int j, int... rest> int max()
{
int sub = max<j, rest...>();
return i > sub ? i : sub;
}
int main() { return max<1,2,3>(); }
A third C++11 pattern is changed by this patch:
template <template <typename...> class TT, typename... Ts> TT<Ts...> f();
template <typename> struct A { };
int main() { f<A,int>(); }
I aim to resolve these with the ABI committee before GCC 14.1.
We also need to resolve https://github.com/itanium-cxx-abi/cxx-abi/issues/38
(mangling references to dependent template-ids where the name is fully
resolved) as references to concepts in std:: will consistently run into this
area. This is why mangle-concepts1.C only refers to concepts in the global
namespace so far.
The library changes are to avoid trying to mangle builtins, which fails.
Demangler support and test coverage is not complete yet.
commit f2c52c0dfde581461959b0e2b423ad106aadf179
Author: Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
Date: Thu Nov 30 10:06:23 2023 +0100
libiberty: Disable hwcaps for sha1.o
This patch
commit bf4f40cc3195eb7b900bf5535cdba1ee51fdbb8e
Author: Jakub Jelinek <jakub@redhat.com>
Date: Tue Nov 28 13:14:05 2023 +0100
libiberty: Use x86 HW optimized sha1
broke Solaris/x86 bootstrap with the native as:
libtool: compile: /var/gcc/regression/master/11.4-gcc/build/./gcc/gccgo -B/var/gcc/regression/master/11.4-gcc/build/./gcc/ -B/vol/gcc/i386-pc-solaris2.11/bin/ -B/vol/gcc/i386-pc-solaris2.11/lib/ -isystem /vol/gcc/i386-pc-solaris2.11/include -isystem /vol/gcc/i386-pc-solaris2.11/sys-include -fchecking=1 -minline-all-stringops -O2 -g -I . -c -fgo-pkgpath=internal/goarch /vol/gcc/src/hg/master/local/libgo/go/internal/goarch/goarch.go zgoarch.go
ld.so.1: go1: fatal: /var/gcc/regression/master/11.4-gcc/build/gcc/go1: hardware capability (CA_SUNW_HW_2) unsupported: 0x4000000 [ SHA1 ]
gccgo: fatal error: Killed signal terminated program go1
As is already done in a couple of other similar cases, this patches
disables hwcaps support for libiberty.
Initially, this didn't work because config/hwcaps.m4 uses target_os, but
didn't ensure it is defined.
Tested on i386-pc-solaris2.11 with as and gas.
commit bf4f40cc3195eb7b900bf5535cdba1ee51fdbb8e
Author: Jakub Jelinek <jakub@redhat.com>
Date: Tue Nov 28 13:14:05 2023 +0100
libiberty: Use x86 HW optimized sha1
Nick has approved this patch (+ small ld change to use it for --build-id=),
so I'm commiting it to GCC as master as well.
If anyone from ARM would be willing to implement it similarly with
vsha1{cq,mq,pq,h,su0q,su1q}_u32 intrinsics, it could be a useful linker
speedup on those hosts as well, the intent in sha1.c was that
sha1_hw_process_bytes, sha1_hw_process_block functions
would be defined whenever
defined (HAVE_X86_SHA1_HW_SUPPORT) || defined (HAVE_WHATEVERELSE_SHA1_HW_SUPPORT)
but the body of sha1_hw_process_block and sha1_choose_process_bytes
would then have #elif defined (HAVE_WHATEVERELSE_SHA1_HW_SUPPORT) for
the other arch support, similarly for any target attributes on
sha1_hw_process_block if needed.
commit 01bc30b222a9d2ff0269325d9e367f8f1fcef942
Author: Mark Wielaard <mjw@redhat.com>
Date: Wed Nov 15 20:27:08 2023 +0100
Regenerate libiberty/aclocal.m4 with aclocal 1.15.1
There is a new buildbot check that all autotool files are generated
with the correct versions (automake 1.15.1 and autoconf 2.69).
https://builder.sourceware.org/buildbot/#/builders/gcc-autoregen
Correct one file that was generated with the wrong version.
commit 879cf9ff45d94065d89e24b71c6b27c7076ac518
Author: Brendan Shanks <bshanks@codeweavers.com>
Date: Thu Nov 9 21:01:07 2023 -0700
[PATCH v3] libiberty: Use posix_spawn in pex-unix when available.
Hi,
This patch implements pex_unix_exec_child using posix_spawn when
available.
This should especially benefit recent macOS (where vfork just calls
fork), but should have equivalent or faster performance on all
platforms.
In addition, the implementation is substantially simpler than the
vfork+exec code path.
Tested on x86_64-linux.
v2: Fix error handling (previously the function would be run twice in
case of error), and don't use a macro that changes control flow.
v3: Match file style for error-handling blocks, don't close
in/out/errdes on error, and check close() for errors.
commit 810bcc00156cefce7ad40fc9d8de6e43c3a04450
Author: Jason Merrill <jason@redhat.com>
Date: Thu Aug 17 11:36:23 2023 -0400
c++: constrained hidden friends [PR109751]
r13-4035 avoided a problem with overloading of constrained hidden friends by
checking satisfaction, but checking satisfaction early is inconsistent with
the usual late checking and can lead to hard errors, so let's not do that
after all.
We were wrongly treating the different instantiations of the same friend
template as the same function because maybe_substitute_reqs_for was failing
to actually substitute in the case of a non-template friend. But we don't
actually need to do the substitution anyway, because [temp.friend] says that
such a friend can't be the same as any other declaration.
After fixing that, instead of a redefinition error we got an ambiguous
overload error, fixed by allowing constrained hidden friends to coexist
until overload resolution, at which point they probably won't be in the same
ADL overload set anyway.
And we avoid mangling collisions by following the proposed mangling for
these friends as a member function with an extra 'F' before the name. I
demangle this by just adding [friend] to the name of the function because
it's not feasible to reconstruct the actual scope of the function since the
mangling ABI doesn't distinguish between class and namespace scopes.
PR c++/109751
|
|
This patch adds support for FEAT_THE doubleword and quadword instructions.
doubleword insturctions are enabled by "+the" flag whereas quadword
instructions are enabled on passing both "+the and +d128" flags.
Support for following sets of instructions is added in this patch.
Read check write compare and swap doubleword:
(rcwcas, rcwcasa, rcwcasal, rcwcasl)
Read check write compare and swap quadword:
(rcwcasp,rcwcaspa, rcwcaspal, rcwcaspl)
Read check write software compare and swap doubleword:
(rcwscas, rcwscasa, rcwscasal, rcwscasl)
Read check write software compare and swap quadword:
(rcwscasp, rcwscaspa, rcwscaspal, rcwscaspl)
Read check write atomic bit clear on doubleword:
(rcwclr, rcwclra, rcwclral, rcwclrl)
Read check write atomic bit clear on quadword:
(rcwclrp, rcwclrpa, rcwclrpal, rcwclrpl)
Read check write software atomic bit clear on doubleword:
(rcwsclr, rcwsclra, rcwsclral, rcwsclrl)
Read check write software atomic bit clear on quadword:
(rcwsclrp,rcwsclrpa, rcwsclrpal,rcwsclrpl)
Read check write atomic bit set on doubleword:
(rcwset,rcwseta, rcwsetal,rcwsetl)
Read check write atomic bit set on quadword:
(rcwsetp,rcwsetpa,rcwsetpal,rcwsetpl)
Read check write software atomic bit set on doubleword:
(rcwsset,rcwsseta,rcwssetal,rcwssetl)
Read check write software atomic bit set on quadword:
(rcwssetp,rcwssetpa,rcwssetpal,rcwssetpl)
Read check write swap doubleword:
(rcwswp,rcwswpa,rcwswpal,rcwswpl)
Read check write swap quadword:
(rcwswpp,rcwswppa, rcwswppal,rcwswppl)
Read check write software swap doubleword:
(rcwsswp,rcwsswpa,rcwsswpal,rcwsswpl)
Read check write software swap quadword:
(rcwsswpp,rcwsswppa,rcwsswppal,rcwsswppl)
|
|
With the addition of 128-bit system registers to the Arm architecture
starting with Armv9.4-a, a mechanism for manipulating their contents
is introduced with the `msrr' and `mrrs' instruction pair.
These move values from one such 128-bit system register into a pair of
contiguous general-purpose registers and vice-versa, as for example:
msrr ttlb0_el1, x0, x1
mrrs x0, x1, ttlb0_el1
This patch adds the necessary support for these instructions, adding
checks for system-register width by defining a new operand type in the
form of `AARCH64_OPND_SYSREG128' and the `aarch64_sys_reg_128bit_p'
predicate, responsible for checking whether the requested system
register table entry is marked as implemented in the 128-bit mode via
the F_REG_128 flag.
|
|
The addition of 128-bit page table descriptors and, with it, the
addition of 128-bit system registers for these means that special
"invalidate translation table entry" instructions are needed to cope
with the new 128-bit model. This is introduced with the `tlbpi'
instruction, implemented here.
|
|
While CRn and CRm fields in the SYSP instruction are 4-bit wide and
are thus able to accommodate values in the range 0-15, the
specifications for the SYSP instructions limit their ranges to 8-9 for
CRm and 0-7 in the case of CRn.
This led to the need to signal in some way to the operand parser that
a given operand is under special restrictions regarding its use. This
is done via the new `F_OPD_NARROW' flag, indicating a narrowing in the
range of operand values for fields in the instruction tagged with the
flag.
The flag is then used in `parse_operands' when the instruction is
assembled, but needs not be taken into consideration during
disassembly.
|
|
Two of the instructions added by the `+d128' architectural extension
add the flexibility to have two optional operands. Prior to the
addition of the `tlbip' and `sysp' instructions, no mnemonic allowed
more than one such optional operand.
With `tlbip' as an example, some TLBIP instruction names do not allow
for any optional operands, while others allow for both to be optional.
In the latter case, it is possible that either the second operand
alone is omitted or both operands are omitted.
Therefore, a considerable degree of flexibility needed to be added to
the way operands were parsed. It was, however, possible to achieve
this with relatively few changes to existing code.
it is noteworthy that opcode flags specifying the optional operand
number are non-orthogonal. For example, we have:
#define F_OPD1_OPT (2 << 12) : 0b10 << 12
#define F_OPD2_OPT (3 << 12) : 0b11 << 12
such that by virtue of the observation that
(F_OPD1_OPT | F_OPD2_OPT) == F_OPD2_OPT
it is impossible to mark both operands 1 and 2 as optional for an
instruction and it is assumed that a maximum of 1 operand can ever be
optional. This is not overly-problematic given that, for optional
pairs, the second optional operand is always found immediately after
the first. Thus, it suffices for us to flag that there is a second
optional operand. With this fact, we can infer its position in the
mnemonic from the position of the first (e.g. if the second operand in
the mnemonic is optional, we know the third is too). We therefore
define the `F_OPD_PAIR_OPT' flag and calculate its position in the
mnemonic from the value encoded by the `F_OPD<n>_OPT' flag.
Another observation is that there is a tight coupling between default
values assigned to the two registers when one (or both) are omitted
from the mnemonic. Namely, if Xt1 has a value of 0x1f (the zero
register is specified), Xt2 defaults to the same value, otherwise Xt2
will be assigned Xt + 1. This meant that where you have default value
validation, in checking the second optional operand's value, it is
also necessary to look at the value assigned to the
previously-processed operand value before deciding its validity. Thus
`process_omitted_operand' needs not only access to its `operand'
argument, but also to the global `inst' struct.
|
|
Analysis of the allowed operand values for `sysp' and `tlbip' reveals
a significant departure from the allowed behavior for operand register
pairs (hitherto labeled AARCH64_OPND_PAIRREG) observed for other
insns in this category.
For instructions `casp', `mrrs' and `msrr' the register pair must
always start at an even index and the second register in the pair is
the index + 1. This precludes the use of xzr as the first register,
given it corresponds to register number 31.
This is different in the case of `sysp' and `tlbip', however. These
allow the use of xzr and, where the first operand in the pair is
omitted, this is the default value assigned to it. When this
operand is assigned xzr, it is expected that the second operand will
likewise take on a value of xzr.
These two instructions therefore "break" two rules of register pairs:
* The first of the two registers is odd-numbered.
* The index of the second register is equal to that of the first,
and not n+1.
To allow for this departure from hitherto standard behavior, we
extend the functionality of the assembler by defining an extension of
the AARCH64_OPND_PAIRREG, called AARCH64_OPND_PAIRREG_OR_XZR.
It is used in defining `sysp' and `tlbip' and allows
`operand_general_constraint_met_p' to allow the pair to both take on
the value of xzr.
|
|
Given the introduction of the new Armv9.4-a `sysp' insn using the
following syntax:
sysp #<op1>, <Cn>, <Cm>, #<op2>{, <Xt1>, <Xt2>}
and by extension the need to encode 6 assembly operands, extend
Binutils to handle instructions taking 6 operands, up from a previous
maximum of 5.
|
|
Indicating the presence of the Armv9.4-a features concerning 128-bit
Page Table Descriptors, 128-bit System Registers and Instructions,
the "+d128" architectural extension flag is added to the list of
possible -march options in Binutils, together with the necessary macro
for encoding d128 instructions.
|
|
This patch adds AArch32 support for -march=armv8.9-a and
-march=armv9.4-a. The behaviour of the new options can be
expressed using a combination of existing feature flags
and tables.
The cpu_arch_ver entries for ARM_ARCH_V9_4A and ARM_ARCH_V8_9A
are technically redundant but it including them for macro code
consistency across architectures.
|
|
Since the particularity of "th.vsetvli" was not taken into account in the
initial support patches for XTheadVector, the program operation failed
due to instruction coding errors. According to T-Head SPEC ([1]), the
"vsetvl" in the XTheadVector extension consists of SEW, LMUL and EDIV,
which is quite different from the "V" extension. Therefore, we cannot
simply reuse the processing of vsetvl in V extension.
We have set up tens of thousands of test cases to ensure that no
further encoding issues are there, and and execute all compiled test
files on real HW and make sure they don't trigger SIGILL.
Ref:
[1] https://github.com/T-head-Semi/thead-extension-spec/releases/download/2.3.0/xthead-2023-11-10-2.3.0.pdf
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Add handling for
th.vsetvli.
(my_getThVsetvliExpression): New function.
(riscv_ip): Likewise.
* testsuite/gas/riscv/x-thead-vector.d: Likewise.
* testsuite/gas/riscv/x-thead-vector.s: Likewise.
include/ChangeLog:
* opcode/riscv.h (OP_MASK_XTHEADVLMUL): New macro.
(OP_SH_XTHEADVLMUL): Likewise.
(OP_MASK_XTHEADVSEW): Likewise.
(OP_SH_XTHEADVSEW): Likewise.
(OP_MASK_XTHEADVEDIV): Likewise.
(OP_SH_XTHEADVEDIV): Likewise.
(OP_MASK_XTHEADVTYPE_RES): Likewise.
(OP_SH_XTHEADVTYPE_RES): Likewise.
opcodes/ChangeLog:
* riscv-dis.c (print_insn_args): Likewise.
* riscv-opc.c: Likewise.
|
|
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
|
|
Add new relocs number for tls le relax.
include/ChangeLog:
* elf/loongarch.h:
(RELOC_NUMBER (R_LARCH_TLS_LE_HI20_R, 121)): New relocs number.
(RELOC_NUMBER (R_LARCH_TLS_LE_ADD_R, 122)): Likewise.
(RELOC_NUMBER (R_LARCH_TLS_LE_LO12_R, 123)): Likewise.
|
|
For
add name@gottpoff(%rip), %reg
mov name@gottpoff(%rip), %reg
add
# define R_X86_64_CODE_4_GOTTPOFF 44
and for
lea name@tlsdesc(%rip), %reg
add
# define R_X86_64_CODE_4_GOTPC32_TLSDESC 45
if the instruction starts at 4 bytes before the relocation offset.
They are similar to R_X86_64_GOTTPOFF and R_X86_64_GOTPC32_TLSDESC,
respectively. Linker can covert GOTTPOFF to
add $name@tpoff, %reg
mov $name@tpoff, %reg
and GOTPC32_TLSDESC to
mov $name@tpoff, %reg
mov name@gottpoff(%rip), %reg
if the instruction is encoded with the REX2 prefix when possible.
bfd/
* elf64-x86-64.c (x86_64_elf_howto_table): Add
R_X86_64_CODE_4_GOTTPOFF and R_X86_64_CODE_4_GOTPC32_TLSDESC.
(R_X86_64_standard): Updated.
(x86_64_reloc_map): Add BFD_RELOC_X86_64_CODE_4_GOTTPOFF
and BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(elf_x86_64_check_tls_transition): Handle R_X86_64_CODE_4_GOTTPOFF
and R_X86_64_CODE_4_GOTPC32_TLSDESC.
(elf_x86_64_tls_transition): Likewise.
(elf_x86_64_scan_relocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
* reloc.c (bfd_reloc_code_real): Add
BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(md_assemble): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF.
(output_insn): Don't add empty REX prefix with REX2 prefix.
(output_disp): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
(md_apply_fix): Likewise.
(i386_validate_fix): Generate BFD_RELOC_X86_64_CODE_4_GOTTPOFF or
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC if ixp->fx_tcbit3 is set.
(tc_gen_reloc): Handle BFD_RELOC_X86_64_CODE_4_GOTTPOFF and
BFD_RELOC_X86_64_CODE_4_GOTPC32_TLSDESC.
* testsuite/gas/i386/x86-64-gottpoff.d: New file.
* testsuite/gas/i386/x86-64-gottpoff.s: Likewise.
* testsuite/gas/i386/x86-64-tlsdesc.d: Likewise.
* testsuite/gas/i386/x86-64-tlsdesc.s: Likewise.
include/
* elf/x86-64.h (elf_x86_64_reloc_type): Add
R_X86_64_CODE_4_GOTTPOFF and R_X86_64_CODE_4_GOTPC32_TLSDESC
ld/
* testsuite/ld-x86-64/tlsbindesc.d: Updated.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc.s: Add R_X86_64_CODE_4_GOTTPOFF
and R_X86_64_CODE_4_GOTPC32_TLSDESC tests.
|
|
For
mov name@GOTPCREL(%rip), %reg
test %reg, name@GOTPCREL(%rip)
binop name@GOTPCREL(%rip), %reg
where binop is one of adc, add, add, cmp, or, sbb, sub, xor instructions,
add
# define R_X86_64_CODE_4_GOTPCRELX 43
if the instruction starts at 4 bytes before the relocation offset. It
similar to R_X86_64_GOTPCRELX. Linker can treat R_X86_64_CODE_4_GOTPCRELX
as R_X86_64_GOTPCREL or convert the above instructions to
lea name(%rip), %reg
mov $name, %reg
test $name, %reg
binop $name, %reg
if the instruction is encoded with the REX2 prefix when possible.
bfd/
* elf64-x86-64.c (x86_64_elf_howto_table): Add
R_X86_64_CODE_4_GOTPCRELX.
(R_X86_64_standard): Updated.
(x86_64_reloc_map): Add BFD_RELOC_X86_64_CODE_4_GOTPCRELX.
(elf_x86_64_convert_load_reloc): Handle R_X86_64_CODE_4_GOTPCRELX.
(elf_x86_64_scan_relocs): Likewise.
(elf_x86_64_relocate_section): Likewise.
* reloc.c (bfd_reloc_code_real): Add
BFD_RELOC_X86_64_CODE_4_GOTPCRELX.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
gas/
* write.h (fix): Add fx_tcbit3. Change fx_unused to 1 bit.
* config/tc-i386.c (tc_i386_fix_adjustable): Handle
BFD_RELOC_X86_64_CODE_4_GOTPCRELX.
(tc_gen_reloc): Likewise.
(output_disp): Set fixP->fx_tcbit3 for REX2 prefix.
(i386_validate_fix): Generate BFD_RELOC_X86_64_CODE_4_GOTPCRELX
if fixp->fx_tcbit3 is set.
* config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Add
BFD_RELOC_X86_64_CODE_4_GOTPCRELX.
(TC_FORCE_RELOCATION_ABS): Likewise.
* testsuite/gas/i386/x86-64-gotpcrel.s: Add tests for
R_X86_64_CODE_4_GOTPCRELX.
* testsuite/gas/i386/x86-64-localpic.s: Likewise.
* testsuite/gas/i386/x86-64-gotpcrel.d: Updated.
* testsuite/gas/i386/x86-64-localpic.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-localpic.d: Likewise.
include/
* elf/x86-64.h (elf_x86_64_reloc_type): Add
R_X86_64_CODE_4_GOTPCRELX.
ld/
* testsuite/ld-x86-64/apx-load1.s: New file.
* testsuite/ld-x86-64/apx-load1a.d: Likewise.
* testsuite/ld-x86-64/apx-load1b.d: Likewise.
* testsuite/ld-x86-64/apx-load1c.d: Likewise.
* testsuite/ld-x86-64/apx-load1d.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run apx-load1a, apx-load1b,
apx-load1c and apx-load1d.
|
|
Define NT_X86_SHSTK which is the note for x86 Shadow Stack (SHSTK) to
support Intel SHSTK in Linux kernel.
For now only userspace shadow stack and kernel IBT are supported by the
linux kernel. This note should be used instead of NT_X86_CET introduced
in the commit "x86: Add NT_X86_CET note", as it is outdated and only
used by old binutils versions.
|
|
APX uses the REX2 prefix to support EGPR for map0 and map1 of legacy
instructions. We added the NoEgpr flag in i386-gen.c for instructions
that do not support EGPR.
gas/ChangeLog:
2023-12-28 Lingling Kong <lingling.kong@intel.com>
H.J. Lu <hongjiu.lu@intel.com>
Lili Cui <lili.cui@intel.com>
Lin Hu <lin1.hu@intel.com>
* config/tc-i386.c
(enum i386_error): Add unsupported_EGPR_for_addressing
and invalid_pseudo_prefix.
(struct _i386_insn): Add rex2 and rex2_encoding for
gpr32.
(cpu_arch): Add apx_f.
(is_cpu): Ditto.
(register_number): Handle RegRex2 for gpr32.
(is_apx_rex2_encoding): New func. Test rex2 prefix encoding.
(build_rex2_prefix): New func. Build legacy insn in
opcode 0/1 use gpr32 with rex2 prefix.
(establish_rex): Handle rex2 and rex2_encoding.
(optimize_encoding): Handel add r16-r31 for registers.
(md_assemble): Handle apx encoding.
(parse_insn): Handle Prefix_REX2.
(check_EgprOperands): New func. Check if Egprs operands
are valid for the instruction
(match_template): Handle Egpr operands check.
(set_rex_rex2): New func. set i.rex and i.rex2.
(build_modrm_byte): Ditto.
(output_insn): Handle rex2 2-byte prefix output.
(check_register): Handle check egpr illegal without
target apx, 64-bit mode and with rex_prefix.
* doc/c-i386.texi: Document .apx.
* testsuite/gas/i386/ilp32/x86-64-opcode-inval-intel.d: D5 valid
in 64-bit mode.
* testsuite/gas/i386/ilp32/x86-64-opcode-inval.d: Ditto.
* testsuite/gas/i386/rex-bad: Adjust rex testcase.
* testsuite/gas/i386/x86-64-opcode-inval-intel.d: Ditto.
* testsuite/gas/i386/x86-64-opcode-inval.d: Ditto.
* testsuite/gas/i386/x86-64-opcode-inval.s: Ditto.
* testsuite/gas/i386/x86-64-pseudos-bad.l: Add illegal rex2 test.
* testsuite/gas/i386/x86-64-pseudos-bad.s: Ditto.
* testsuite/gas/i386/x86-64-pseudos.d: Add rex2 test.
* testsuite/gas/i386/x86-64-pseudos.s: Ditto.
* testsuite/gas/i386/x86-64.exp: Run APX tests.
* testsuite/gas/i386/x86-64-apx-egpr-inval.l: New test.
* testsuite/gas/i386/x86-64-apx-egpr-inval.s: New test.
* testsuite/gas/i386/x86-64-apx-rex2.d: New test.
* testsuite/gas/i386/x86-64-apx-rex2.s: New test.
include/ChangeLog:
* opcode/i386.h (REX2_OPCODE): New.
(REX2_M): Ditto.
opcodes/ChangeLog:
* i386-dis.c (struct instr_info): Add erex for gpr32.
Add last_erex_prefix for rex2 prefix.
(REX2_M): Extend for gpr32.
(PREFIX_REX2): Ditto.
(PREFIX_REX2_ILLEGAL): Ditto.
(ckprefix): Ditto.
(prefix_name): Ditto.
(print_insn): Ditto.
(print_register): Ditto.
(OP_E_memory): Ditto.
(OP_REG): Ditto.
(OP_EX): Ditto.
* i386-gen.c (rex2_disallowed): Some instructions are not allowed rex2 prefix.
(process_i386_opcode_modifier): Set NoEgpr for VEX and some special instructions.
(output_i386_opcode): Handle if_entry_needs_special_handle.
* i386-init.h : Regenerated.
* i386-mnem.h : Regenerated.
* i386-opc.h (enum i386_cpu): Add CpuAPX_F.
(NoEgpr): New.
(Prefix_NoOptimize): Ditto.
(Prefix_REX2): Ditto.
(RegRex2): Ditto.
* i386-opc.tbl: Add rex2 prefix.
* i386-reg.tbl: Add egprs (r16-r31).
* i386-tbl.h: Regenerated.
|
|
The pcalau12i + addi.d of TLS LD/GD/DESC relax to pcaddi.
Relaxation is only performed when the TLS model transition is not possible.
|
|
Transitions between DESC->IE/LE and IE->LE are supported now.
1. For DESC -> LE:
pcalau12i $a0,%desc_pc_hi20(var) => lu12i.w $a0,%le_hi20(var)
addi.d $a0,$a0,%desc_pc_lo12(var) => ori $a0,$a0,%le_lo12(var)
ld.d $a1,$a0,%desc_ld(var) => NOP
jirl $ra,$a1,%desc_call(var) => NOP
add.d $a0,$a0,$tp
2. For DESC -> IE:
pcalau12i $a0,%desc_pc_hi20(var) => pcalau12i $a0,%ie_pc_hi20(var)
addi.d $a0,$a0,%desc_pc_lo12(var) => ld.d $a0,$a0,%ie_pc_lo12(var)
ld.d $a1,$a0,%desc_ld(var) => NOP
jirl $ra,$a1,%desc_call(var) => NOP
add.d $a0,$a0,$tp
3. For IE -> LE:
pcalau12i $a0,%ie_pc_hi20(var) => lu12i.w $a0,%le_hi20(var)
ld.d $a0,$a0,%ie_pc_lo12(var) => ori $a0,$a0,%le_lo12(var)
add.d $a0,$a0,$tp
4. When a tls variable is accessed using both DESC and IE, DESC transitions
to IE and uses the same GOT entry as IE.
|
|
The normal DESC instruction sequence is:
pcalau12i $a0,%desc_pc_hi20(var) #R_LARCH_TLS_DESC_PC_HI20
addi.d $a0,$a0,%desc_pc_lo12(var) #R_LARCH_TLS_DESC_PC_LO12
ld.d $ra,$a0,%desc_ld(var) #R_LARCH_TLS_DESC_LD
jirl $ra,$ra,%desc_call(var) #R_LARCH_TLS_DESC_CALL
add.d $a0,$a0,$tp
|
|
Print instruction description as comment in disassembly with s390
architecture specific option "insndesc":
- For objdump it can be enabled with option "-M insndesc"
- In gdb it can be enabled with "set disassembler-options insndesc"
Since comments are not column aligned the output can enhanced for
readability by postprocessing using a filter such as "expand":
... | expand -t 8,16,24,32,40,80
Or when using in combination with objdump option --visualize-jumps:
... | expand | sed -e 's/ *#/\t#/' | expand -t 1,80
Note that the instruction descriptions add about 128 KB to s390-opc.o:
s390-opc.o without instruction descriptions: 216368 bytes
s390-opc.o with instruction descriptions : 348432 bytes
binutils/
* NEWS: Mention new s390-specific disassembler option
"insndesc".
include/
* opcode/s390.h (struct s390_opcode): Add field to hold
instruction description.
opcodes/
* s390-mkopc.c: Copy instruction description from s390-opc.txt
into generated operation code table s390-opc.tab.
* s390-opc.c (s390_opformats): Provide NULL as description in
.insn pseudo-mnemonics opcode table.
* s390-dis.c: Add s390-specific disassembler option "insndesc"
and optionally print the instruction description as comment in
the disassembly when it is specified.
gas/
* testsuite/gas/s390/s390.exp: Add new test disassembly test
case "zarch-insndesc".
* testsuite/gas/s390/zarch-insndesc.s: New test case for s390-
specific disassembler option "insndesc".
* testsuite/gas/s390/zarch-insndesc.d: Likewise.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
|
|
This patch add support for FEAT_ITE "Instrumentation Extension" adding
the "trcit" instruction.
This is enabled by the +ite march flag.
|
|
This patch add supports for FEAT_SPECRES2 "Enhanced speculation
restriction instructions" adding the "cosp" instruction.
This is mandatory v8.9-a/v9.4-a and optional v8.0-a+/v9.0-a+. It is
enabled by the +predres2 march flag.
|
