aboutsummaryrefslogtreecommitdiff
path: root/gas
AgeCommit message (Collapse)AuthorFilesLines
2016-11-22gas,opcodes: fix hardware capabilities bumping in the sparc assembler.Jose E. Marchesi5-58/+80
When the assembler finds an instruction which is part of a higher opcode architecture it bumps the current opcode architecture. For example: $ echo "mwait" | as -bump {standard input}: Assembler messages: {standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait" However, when two instructions pertaining to the same opcode architecture but associated to different SPARC hardware capabilities are found in the input stream, and no GAS architecture is specified in the command line, the assembler bangs: $ echo "mwait; wr %g0,%g1,%mcdper" | as -bump {standard input}: Assembler messages: {standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait" {standard input}:1: Error: Hardware capability "sparc5" not enabled for "wr". ... and it should'nt, as WRMCDPER pertains to the same architecture level than MWAIT. This patch fixes this by extending the definition of sparc opcode architectures to contain a set of hardware capabilities and making the assembler to take these capabilities into account when updating the set of allowed hwcaps when an architecture bump is triggered by some instruction. This way, hwcaps associated to architecture levels are maintained in opcodes, while the assembler keeps the flexibiity of defining GAS architectures including additional hwcaps (like -Asparcfmaf or the v8plus* variants). A test covering this failure case is included. gas/ChangeLog: 2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c: Move HWS_* and HWS2_* definitions to opcodes/sparc-opc.c. (sparc_arch): Clarify the new role of the hwcap_allowed and hwcap2_allowed fields. (sparc_arch_table): Remove HWS_* and HWS2_* instances from hwcap_allowed and hwcap2_allowed respectively. (md_parse_option): Include the opcode arch hwcaps when processing -A. (sparc_ip): Use the current opcode arch hwcaps to update hwcap_allowed, as well of the hwcaps of the instruction triggering the bump. * testsuite/gas/sparc/hwcaps-bump.s: New file. * testsuite/gas/sparc/hwcaps-bump.l: Likewise. * testsuite/gas/sparc/sparc.exp (gas_64_check): Run tests in hwcaps-bump. include/ChangeLog: 2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com> * opcode/sparc.h (sparc_opcode_arch): New fields hwcaps and hwcaps2. opcodes/ChangeLog: 2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-opc.c (HWS_V8): Definition moved from gas/config/tc-sparc.c. (HWS_V9): Likewise. (HWS_VA): Likewise. (HWS_VB): Likewise. (HWS_VC): Likewise. (HWS_VD): Likewise. (HWS_VE): Likewise. (HWS_VV): Likewise. (HWS_VM): Likewise. (HWS2_VM): Likewise. (sparc_opcode_archs): Initialize hwcaps and hwcaps2 fields of existing entries.
2016-11-22[ARC] Fix printing 'b' mnemonics.Claudiu Zissulescu2-2/+6
gas/ 2016-11-22 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/b.d: Update test result. opcode/ 2016-11-22 Claudiu Zissulescu <claziss@synopsys.com> * arc-tbl.h: Reorder conditional flags with delay flags for 'b' instructions.
2016-11-22PR20744, Incorrect PowerPC VLE relocsAlan Modra3-91/+82
VLE 16A and 16D relocs were functionally swapped. PR 20744 include/ * opcode/ppc.h: Define VLE insns using 16A and 16D relocs. bfd/ * elf32-ppc.h (struct ppc_elf_params): Add vle_reloc_fixup field. * elf32-ppc.c: Include opcode/ppc.h. (ppc_elf_howto_raw): Correct dst_mask for R_PPC_VLE_LO16A, R_PPC_VLE_LO16D, R_PPC_VLE_HI16A, R_PPC_VLE_HI16D, R_PPC_VLE_HA16A, R_PPC_VLE_HA16D, R_PPC_VLE_SDAREL_LO16A, R_PPC_VLE_SDAREL_LO16D, R_PPC_VLE_SDAREL_HI16A, R_PPC_VLE_SDAREL_HI16D, R_PPC_VLE_SDAREL_HA16A, and R_PPC_VLE_SDAREL_HA16D relocs. (ppc_elf_link_hash_table_create): Update default_params init. (ppc_elf_vle_split16): Correct shift and mask. Add params. Report or fix insn/reloc mismatches. (ppc_elf_relocate_section): Pass input_section, offset and fixup to ppc_elf_vle_split16. binutils/ * NEWS: Mention PowerPC VLE relocation error. gas/ * config/tc-ppc.c: Delete VLE insn defines. (md_assemble): Swap use_a_reloc and use_d_reloc. * testsuite/gas/ppc/vle-reloc.d: Update. ld/ * emultempl/ppc32elf.em (params): Update initializer. Handle --vle-reloc-fixup command line arg.
2016-11-21[GAS][ARM][PR20827]Fix gas error for two register form instruction (pre-UAL ↵Renlin Li4-2/+29
syntax). gas/ 2016-11-21 Renlin Li <renlin.li@arm.com> PR gas/20827 * config/tc-arm.c (encode_arm_shift): Don't assert for operands not presented. * testsuite/gas/arm/add-shift-two.d: New. * testsuite/gas/arm/add-shift-two.s: New.
2016-11-21Use ACX_PROG_CMP_IGNORE_INITIAL in gasAlan Modra6-26/+56
* configure.ac: Invoke ACX_PROG_CMP_IGNORE_INITIAL. * Makefile.am (comparison): Rewrite using do_compare. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate.
2016-11-18[ARC] Fix and extend features of .cpu directive.Claudiu Zissulescu8-18/+119
gas/ 2016-11-18 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/cl-warn.s: New file. * testsuite/gas/arc/cpu-pseudop-1.d: Likewise. * testsuite/gas/arc/cpu-pseudop-1.s: Likewise. * testsuite/gas/arc/cpu-pseudop-2.d: Likewise. * testsuite/gas/arc/cpu-pseudop-2.s: Likewise. * testsuite/gas/arc/cpu-warn2.s: Likewise. * config/tc-arc.c (selected_cpu): Initialize. (feature_type): New struct. (feature_list): New variable. (arc_check_feature): New function. (arc_select_cpu): Check for .cpu duplicates. Don't overwrite the current cpu features. Check if a feature is available for a given cpu. (md_parse_option): Test if features are available for a given cpu.
2016-11-18[AArch64] Add ARMv8.3 FCMLA and FCADD instructionsSzabolcs Nagy7-0/+125
Add support for FCMLA and FCADD complex arithmetic SIMD instructions. FCMLA has an indexed element variant where the index range has to be treated specially because a complex number takes two elements and the indexed vector size depends on the other operands. These complex number SIMD instructions are part of ARMv8.3 https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_IMM_ROT1, AARCH64_OPND_IMM_ROT2, AARCH64_OPND_IMM_ROT3. (enum aarch64_op): Add OP_FCMLA_ELEM. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define. (aarch64_feature_simd_v8_3, SIMD_V8_3): Define. (aarch64_opcode_table): Add fcmla and fcadd. (AARCH64_OPERANDS): Add IMM_ROT{1,2,3}. * aarch64-asm.h (aarch64_ins_imm_rotate): Declare. * aarch64-asm.c (aarch64_ins_imm_rotate): Define. * aarch64-dis.h (aarch64_ext_imm_rotate): Declare. * aarch64-dis.c (aarch64_ext_imm_rotate): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}. * aarch64-opc.c (fields): Add FLD_rotate{1,2,3}. (operand_general_constraint_met_p): Rotate and index range check. (aarch64_print_operand): Handle rotate operand. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT*. * testsuite/gas/aarch64/advsimd-armv8_3.d: New. * testsuite/gas/aarch64/advsimd-armv8_3.s: New. * testsuite/gas/aarch64/illegal-fcmla.s: New. * testsuite/gas/aarch64/illegal-fcmla.l: New. * testsuite/gas/aarch64/illegal-fcmla.d: New.
2016-11-18[AArch64] Add ARMv8.3 weaker release consistency load instructionsSzabolcs Nagy6-0/+93
Add support for ARMv8.3 LDAPRB, LDAPRH and LDAPR weak release consistency load instructions. (They are equivalent to LDARB, LDARH and LDAR instructions other than the weaker memory ordering requirement.) For more details about weak release consistency see https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (arch64_opcode_table): Add ldaprb, ldaprh, ldapr. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * testsuite/gas/aarch64/ldst-exclusive-armv8_3.s: Add ldaprb, ldaprh, ldapr tests. * testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Likewise. * testsuite/gas/aarch64/illegal-ldapr.s: Likewise. * testsuite/gas/aarch64/illegal-ldapr.d: Likewise. * testsuite/gas/aarch64/illegal-ldapr.l: Likewise.
2016-11-18[AArch64] Add ARMv8.3 javascript floating-point conversion instructionSzabolcs Nagy9-0/+61
Add support for ARMv8.3 FJCVTZS floating-point conversion instruction. For details about javascript floating-point conversion see https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (arch64_opcode_table): Add fjcvtzs. (QL_FP2INT_W_D, aarch64_feature_fp_v8_3, FP_V8_3): Define. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * testsuite/gas/aarch64/fp-armv8_3.s: Add fjcvtzs test. * testsuite/gas/aarch64/fp-armv8_3.d: Likewise. * testsuite/gas/aarch64/illegal-fjcvtzs.s: Likewise. * testsuite/gas/aarch64/illegal-fjcvtzs.d: Likewise. * testsuite/gas/aarch64/illegal-fjcvtzs.l: Likewise. * testsuite/gas/aarch64/illegal-nofp-armv8_3.s: Likewise. * testsuite/gas/aarch64/illegal-nofp-armv8_3.d: Likewise. * testsuite/gas/aarch64/illegal-nofp-armv8_3.l: Likewise.
2016-11-18[AArch64] Add ARMv8.3 combined pointer authentication load instructionsSzabolcs Nagy7-0/+158
Add support for ARMv8.3 LDRAA and LDRAB combined pointer authentication and load instructions. These instructions authenticate the base register and load 8 byte from it plus a scaled 10-bit offset with optional writeback to update the base register. A new instruction class (ldst_imm10) and operand type (AARCH64_OPND_ADDR_SIMM10) were introduced to handle the special addressing form. include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM10. (enum aarch64_insn_class): Add ldst_imm10. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_X1NIL): New. (arch64_opcode_table): Add ldraa, ldrab. (AARCH64_OPERANDS): Add "ADDR_SIMM10". * aarch64-asm.h (aarch64_ins_addr_simm10): Declare. * aarch64-asm.c (aarch64_ins_addr_simm10): Define. * aarch64-dis.h (aarch64_ext_addr_simm10): Declare. * aarch64-dis.c (aarch64_ext_addr_simm10): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_S_simm10. * aarch64-opc.c (fields): Add data for FLD_S_simm10. (operand_general_constraint_met_p): Handle AARCH64_OPND_ADDR_SIMM10. (aarch64_print_operand): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_ADDR_SIMM10. (fix_insn): Likewise. (warn_unpredictable_ldst): Handle ldst_imm10. * testsuite/gas/aarch64/pac.s: Add ldraa and ldrab tests. * testsuite/gas/aarch64/pac.d: Likewise. * testsuite/gas/aarch64/illegal-ldraa.s: New. * testsuite/gas/aarch64/illegal-ldraa.l: New. * testsuite/gas/aarch64/illegal-ldraa.d: New.
2016-11-15Fix SPARC relocations generated for the .eh_frame section.Nick Clifton2-1/+10
PR gas/20803 * config/tc-sparc.c (cons_fix_new_sparc): Use unaligned relocs in the .eh_frame section.
2016-11-13add missing ChangeLog entryAnthony Green1-0/+4
2016-11-13Assemble 'bad' moxie instructionAnthony Green1-0/+7
2016-11-11Accept L and LL suffixes to integer constants.Nick Clifton5-0/+35
PR gas/20732 * expr.c (integer_constant): If tc_allow_L_suffix is defined and non-zero then accept a L or LL suffix. * testsuite/gas/sparc/pr20732.d: New test source file. * testsuite/gas/sparc/pr20732.d: New test output file. * testsuite/gas/sparc/sparc.exp: Run new test.
2016-11-11[AArch64] Add ARMv8.3 combined pointer authentication branch instructionsSzabolcs Nagy3-0/+40
Add support for ARMv8.3 pointer authentication instructions that are encoded as unconditional branch instructions. opcodes/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (arch64_opcode_table): Add braa, brab, blraa, blrab, braaz, brabz, blraaz, blrabz, retaa, retab, eretaa, eretab. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-08 Szabolcs Nagy <szabolcs.nagy@arm.com> * testsuite/gas/aarch64/pac.s: Add ARMv8.3 branch instruction tests. * testsuite/gas/aarch64/pac.d: Likewise.
2016-11-11[AArch64] Add ARMv8.3 PACGA instructionSzabolcs Nagy4-0/+14
Add support for the ARMv8.3 PACGA instruction. include/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_Rm_SP. opcodes/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (arch64_opcode_table): Add pacga. (AARCH64_OPERANDS): Add Rm_SP. * aarch64-opc.c (aarch64_print_operand): Handle AARCH64_OPND_Rm_SP. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (process_omitted_operand): Handle AARCH64_OPND_Rm_SP. (parse_operands): Likewise. * testsuite/gas/aarch64/pac.s: Add pacga. * testsuite/gas/aarch64/pac.d: Add pacga.
2016-11-11[AArch64] Add ARMv8.3 single source PAC instructionsSzabolcs Nagy3-0/+73
Add support for ARMv8.3 pointer authentication instructions that are encoded as single source data processing instructions. opcodes/ 2016-11-08 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (arch64_opcode_table): Add pacia, pacib, pacda, pacdb, autia, autib, autda, autdb, paciza, pacizb, pacdza, pacdzb, autiza, autizb, autdza, autdzb, xpaci, xpacd. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/testsuite/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * testsuite/gas/aarch64/pac.s: New. * testsuite/gas/aarch64/pac.d: New.
2016-11-11[AArch64] Add ARMv8.3 pointer authentication key registersSzabolcs Nagy5-0/+80
Add support for system registers introduced in ARMv8.3 for pointer authentication. opcodes/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-opc.c (aarch64_sys_regs): Add apiakeylo_el1, apiakeyhi_el1, apibkeylo_el1, apibkeyhi_el1, apdakeylo_el1, apdakeyhi_el1, apdbkeylo_el1, apdbkeyhi_el1, apgakeylo_el1 and apgakeyhi_el1. (aarch64_sys_reg_supported_p): Add feature test for new registers. gas/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * testsuite/gas/aarch64/sysreg-3.s: New. * testsuite/gas/aarch64/sysreg-3.d: New. * testsuite/gas/aarch64/illegal-sysreg-3.l: New. * testsuite/gas/aarch64/illegal-sysreg-3.d: New.
2016-11-11[AArch64] Add ARMv8.3 instructions which are in the NOP spaceSzabolcs Nagy4-13/+94
This patch adds support for a subset of the ARMv8.3 pointer authentication instructions: XPACLRI, PACIA1716, PACIB1716, AUTIA1716, AUTIA1716, PACIAZ, PACIASP, PACIBZ, PACISP, AUTIAZ, AUTIASP, AUTIBZ, AUTIBSP. These are aliases to HINT #0x7, HINT #0x8, HINT #0xa, HINT #0xc, HINT #0xe, HINT #0x18, HINT #0x19, ..., HINT #0x1f respectively. For more details about pointer authentication in ARMv8.3 see https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions opcodes/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (aarch64_feature_v8_3, ARMV8_3, V8_3_INSN): New. (arch64_opcode_table): Add xpaclri, pacia1716, pacib1716, autia1716, autib1716, paciaz, paciasp, pacibz, pacibsp, autiaz, autiasp, autibz, autibsp. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. gas/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * testsuite/gas/aarch64/system-3.s: New. * testsuite/gas/aarch64/system-3.d: New. * testsuite/gas/aarch64/system.d: Update expected output.
2016-11-11[AArch64] Add ARMv8.3 command line option and feature flagSzabolcs Nagy3-1/+7
ARMv8.3 can be selected with -march=armv8.3-a command line option. An overview of the ARMv8.3 architecture extension is at https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions gas/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a". * doc/c-aarch64.texi (-march): Likewise. include/ 2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_3): Define. (AARCH64_ARCH_V8_3): Define. (AARCH64_ARCH_V8_1, AARCH64_ARCH_V8_2): Simplify.
2016-11-11[AArch64] Fix feature dependencies for +simd and +cryptoSzabolcs Nagy7-2/+48
According to the gas manual, +simd implies +fp and +crypto implies +simd. Make sure +nofp turns +simd, +crypto and +fp16 off. gas/ 2016-11-07 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (aarch64_features): Fix "simd" and "crypto". * testsuite/gas/aarch64/illegal-crypto-nofp.d: New. * testsuite/gas/aarch64/illegal-crypto-nofp.l: New. * testsuite/gas/aarch64/illegal-fp16-nofp.d: New. * testsuite/gas/aarch64/illegal-fp16-nofp.l: New. * testsuite/gas/aarch64/illegal-fp16-nofp.s: New.
2016-11-09X86: Remove the .s suffix from EVEX vpextrwH.J. Lu8-72/+17
The .s suffix indicates that the instruction is encoded by swapping 2 register operands. Since vpextrw takes an XMM register and an integer register, the .s suffix should be ignored for EVEX vpextrw. gas/ PR binutils/20799 * testsuite/gas/i386/opcode.s: Add a test for EVEX vpextrw. * testsuite/gas/i386/opcode-intel.d: Updated. * testsuite/gas/i386/opcode-suffix.d: Likewise. * testsuite/gas/i386/opcode.d: Likewise. * testsuite/gas/i386/x86-64-avx512bw-opts.s: Remove vpextrw tests. * testsuite/gas/i386/x86-64-avx512bw-opts-intel.d: Updated. * testsuite/gas/i386/x86-64-avx512bw-opts.d: Likewise. opcodes/ PR binutils/20799 * i386-dis-evex.h (evex_table): Replace EdqwS with Edqw. * i386-dis.c (EdqwS): Removed. (dqw_swap_mode): Likewise. (intel_operand_size): Don't check dqw_swap_mode. (OP_E_register): Likewise. (OP_E_memory): Likewise. (OP_G): Likewise. (OP_EX): Likewise. * i386-opc.tbl: Remove "S" from EVEX vpextrw. * i386-tbl.h: Regerated.
2016-11-09X86: Update opcode-suffix.dH.J. Lu2-0/+13
PR binutils/20754 * testsuite/gas/i386/opcode-suffix.d: Updated.
2016-11-07X86: Properly handle bad FPU opcodeH.J. Lu4-0/+23
Since Bad_Opcode and FGRPd9_2 were the same in i386-dis.c, all Bad_Opcode entries in float_reg were displaced as FGRPd9_2. This patch adds an entry for Bad_Opcode in fgrps to avoid treating it as FGRPd9_2. gas/ PR binutils/20775 * testsuite/gas/i386/i386.exp: Run fpu-bad. * testsuite/gas/i386/fpu-bad.d: New file. * testsuite/gas/i386/fpu-bad.s: Likewise. opcodes/ PR binutils/20775 * i386-dis.c (FGRPd9_2): Replace 0 with 1. (FGRPd9_4): Replace 1 with 2. (FGRPd9_5): Replace 2 with 3. (FGRPd9_6): Replace 3 with 4. (FGRPd9_7): Replace 4 with 5. (FGRPda_5): Replace 5 with 6. (FGRPdb_4): Replace 6 with 7. (FGRPde_3): Replace 7 with 8. (FGRPdf_4): Replace 8 with 9. (fgrps): Add an entry for Bad_Opcode.
2016-11-04Fix gas crash with unreasonably long linesNathan Sidwell2-43/+59
gas/ * input-scrub.c (partial_size): Make size_t. (buffer_length): Likewise. Adjust meaning. (struct input_save): Adjust partial_size type. (input_scrub_reinit): New. (input_scrub_push, input_scrub_begin): Use it. (input_scrub_next_buffer): Fix buffer extension logic. Only scan newly read buffer for newline.
2016-11-04arc/nps400: Validate address type operands correctlyAndrew Burgess4-3/+69
When we match against an address type operand within an instruction it is important that we match exactly the right address type operand early on, during the opcode selection phase. If we wait until the operand insertion phase to check that we have the correct address operand, then it is too late to select an alternative opcode. This becomes important only when we have multiple opcodes with the same mnemonic, and operand lists that differ only in the type of the address operands. This commit fixes this issue, and adds some example instructions that require this issue to be fixed (the instructions are identical except for the address type operand). gas/ChangeLog: * config/tc-arc.c (find_opcode_match): Use insert function to validate matching address type operands. * testsuite/gas/arc/nps400-10.d: New file. * testsuite/gas/arc/nps400-10.s: New file. opcodes/ChangeLog: * arc-opc.c (arc_flag_operands): Add F_DI14. (arc_flag_classes): Add C_DI14. * arc-nps400-tbl.h: Add new exc instructions.
2016-11-04S/390: Fix 16 bit pc relative relocs.Andreas Krebbel3-7/+33
Since the bpp instruction has been added the 16 bit wide pc relative relocs might occur at offset 2 as well at offset 4 in an instruction. With this patch the different adjustment is passed from md_gather_operand to md_apply_fix via fx_pcrel_adjust field in the fix data structure. No regressions on s390x. gas/ChangeLog: 2016-11-04 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * config/tc-s390.c (md_gather_operands): Set fx_pcrel_adjust. (md_apply_fix): Use/Set fx_pcrel_adjust. * testsuite/gas/s390/zarch-zEC12.d: Add bpp reloc test pattern. * testsuite/gas/s390/zarch-zEC12.s: Add bpp reloc test.
2016-11-04Add support for ARM Cortex-M33 processorThomas Preud'homme4-1/+11
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (cortex-m33): Declare new processor. * doc/c-arm.texi (-mcpu ARM command line option): Document new Cortex-M33 processor. * NEWS: Mention ARM Cortex-M33 support.
2016-11-04Add support for ARM Cortex-M23 processorThomas Preud'homme4-0/+12
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (cortex-m23): Declare new processor. * doc/c-arm.texi (-mcpu ARM command line option): Document new Cortex-M23 processor. * NEWS: Mention ARM Cortex-M23 support.
2016-11-04Update RISC-V documentation and make sure that it is included in the gas ↵Palmer Dabbelt6-4/+32
info file. * Makefile.am (CPU_DOCS): Add c-riscv.texi. * Makefile.in: Regenerate. * doc/all.texi: Set RISCV. * doc/as.texinfo: Add RISCV options. Add RISC-V-Dependent node. Include c-riscv.texi. * doc/c-riscv.texi: Rename RISC-V Options to RISC-V-Opts.
2016-11-03[ARC] Fix ldbit test on 32-bit systemsGraham Markall3-7/+13
The long immediate operand chosen for one of the ldbit tests is equivalent to a small negative value that would fit inside an s9 operand, leading to the assembler to choose an unexpected (but legitimate) encoding of the instruction on 32-bit systems, and therefore causing the test to fail. This commit fixes the test by changing the offending limm value so that it can no longer be interpreted as an s9 operand. gas/ChangeLog: * testsuite/gas/arc/nps400-6.s: Change ldbit tests so that limm operands are out of the range of an s9, in order to fix the test. * testsuite/gas/arc/nps400-6.d: Updated to match new expected output.
2016-11-03arc: Implement NPS-400 dcmac instructionGraham Markall3-0/+100
gas/ChangeLog: * testsuite/gas/arc/nps-400-9.d: Added. * testsuite/gas/arc/nps-400-9.s: Added. include/ChangeLog: * opcode/arc.h: Add PROTOCOL_DECODE to insn_class_t. opcodes/ChangeLog: * arc-dis.c (arc_insn_length): Return length 8 for instructions with major opcode 0xa. * arc-nps-400-tbl.h: Add dcmac instruction. * arc-opc.c (arc_operands): Added operands for dcmac instruction. (insert_nps_rbdouble_64): Added. (extract_nps_rbdouble_64): Added. (insert_nps_proto_size): Added. (extract_nps_proto_size): Added.
2016-11-03arc: Change max instruction length to 64-bitsAndrew Burgess2-125/+44
The current handling for arc instructions longer than 32-bits is all handled as a special case in both the assembler and disassembler. The problem with this approach is that it leads to code duplication, selecting a long instruction is exactly the same process as selecting a short instruction, except over more bits, in both cases we select based on bit comparison, and initial operand insertion and extraction. This commit unifies both the long and short instruction worlds, converting the core opcodes library from being largely 32-bit focused, to being largely 64-bit focused. The changes are, on the whole, not too much. There's obviously a lot of type changes but otherwise the bulk of the code just works. Most of the actual functional changes are to code that previously handled the longer 48 or 64 bit instructions. The insert/extract handlers for these have now been brought into line with the short instruction insert/extract handlers. All of the special case handling code that was previously added has now been removed again. Overall, this commit reduces the amount of code in the arc assembler and disassembler. gas/ChangeLog: * config/tc-arc.c (struct arc_insn): Change type of insn field. (md_number_to_chars_midend): Support 6- and 8-byte values. (emit_insn0): Update debug output. (find_opcode_match): Likewise. (build_fake_opcode_hash_entry): Delete. (find_special_case_long_opcode): Delete. (find_special_case): Remove long format special case handling. (insert_operand): Change instruction type and update debug print format. (assemble_insn): Change instruction type, update debug print formats, and remove unneeded assert. include/ChangeLog: * opcode/arc.h (struct arc_opcode): Change type of opcode and mask fields. (struct arc_long_opcode): Delete. (struct arc_operand): Change types for insert and extract handlers. opcodes/ChangeLog: * arc-dis.c (struct arc_operand_iterator): Remove all fields relating to long instruction processing, add new limm field. (OPCODE): Rename to... (OPCODE_32BIT_INSN): ...this. (OPCODE_AC): Delete. (skip_this_opcode): Handle different instruction lengths, update macro name. (special_flag_p): Update parameter type. (find_format_from_table): Update for more instruction lengths. (find_format_long_instructions): Delete. (find_format): Update for more instruction lengths. (arc_insn_length): Likewise. (extract_operand_value): Update for more instruction lengths. (operand_iterator_next): Remove code relating to long instructions. (arc_opcode_to_insn_type): New function. (print_insn_arc):Update for more instructions lengths. * arc-ext.c (extInstruction_t): Change argument type. * arc-ext.h (extInstruction_t): Change argument type. * arc-fxi.h: Change type unsigned to unsigned long long extensively throughout. * arc-nps400-tbl.h: Add long instructions taken from arc_long_opcodes table in arc-opc.c. * arc-opc.c: Update parameter types on insert/extract handlers. (arc_long_opcodes): Delete. (arc_num_long_opcodes): Delete. (arc_opcode_len): Update for more instruction lengths.
2016-11-03arc: Replace ARC_SHORT macro with arc_opcode_len functionGraham Markall2-2/+9
In preparation for moving to a world where arc instructions can be 2, 4, 6, or 8 bytes in length, replace the ARC_SHORT macro (which is either true of false) with an arc_opcode_len function that returns a length in bytes. There should be no functional change after this commit. gas/ChangeLog: * config/tc-arc.c (assemble_insn): Replace use of ARC_SHORT with arc_opcode_len. include/ChangeLog: * opcode/arc.h (arc_opcode_len): Declare. (ARC_SHORT): Delete. opcodes/ChangeLog: * arc-dis.c (find_format_from_table): Replace use of ARC_SHORT with arc_opcode_len. (find_format_long_instructions): Likewise. * arc-opc.c (arc_opcode_len): New function.
2016-11-03gas/arc: Replace short_insn flag with insn length fieldGraham Markall2-45/+27
When assembling an instruction replace the short_insn boolean flag with an integer field for holding the instruction length. This is in preparation for moving to a world where instructions can be 2, 4, 6, or 8 bytes in length. gas/ChangeLog: * config/tc-arc.c (struct arc_insn): Replace short_insn flag with len field. (apply_fixups): Update to use len field. (emit_insn0): Simplify code, making use of len field. (md_convert_frag): Update to use len field. (assemble_insn): Update to use len field.
2016-11-04New option falkor for Qualcomm server partSiddhesh Poyarekar5-0/+15
This adds an option for the Qualcomm falkor core, the corresponding gcc patch is here: https://gcc.gnu.org/ml/gcc-patches/2016-11/msg00262.html This was tested with aarch64 and armhf builds and make check and also by building and running SPEC2006. * config/tc-aarch64.c (aarch64_cpus): Add falkor. * config/tc-arm.c (arm_cpus): Likewise. * doc/c-aarch64.texi: Likewise. * doc/c-arm.texi: Likewise.
2016-11-03X86: Decode opcode 0x82 as opcode 0x80 in 32-bit modeH.J. Lu4-0/+32
Update x86 disassembler to treat opcode 0x82 as an aliase of opcode 0x80 in 32-bit mode. gas/ PR binutils/20754 * testsuite/gas/i386/opcode.s: Add tests for opcode 0x82. * testsuite/gas/i386/opcode-intel.d: Updated. * testsuite/gas/i386/opcode.d: Likewise. opcodes/ PR binutils/20754 * i386-dis.c (REG_82): New. (X86_64_82_REG_0): Likewise. (X86_64_82_REG_1): Likewise. (X86_64_82_REG_2): Likewise. (X86_64_82_REG_3): Likewise. (X86_64_82_REG_4): Likewise. (X86_64_82_REG_5): Likewise. (X86_64_82_REG_6): Likewise. (X86_64_82_REG_7): Likewise. (dis386): Use REG_82. (reg_table): Add REG_82. (x86_64_table): Add X86_64_82_REG_0, X86_64_82_REG_1, X86_64_82_REG_2, X86_64_82_REG_3, X86_64_82_REG_4, X86_64_82_REG_5, X86_64_82_REG_6 and X86_64_82_REG_7.
2016-11-03[ARM] Allow MOV/MOV.W to accept all possible immediatesJiong Wang10-17/+108
gas/ * config/tc-arm.c (SBIT_SHIFT): New. (T2_SBIT_SHIFT): Likewise. (t32_insn_ok): Return TRUE for MOV in ARMv8-M Baseline. (md_apply_fix): Try UINT16 encoding when ARM/Thumb modified immediate encoding failed. * testsuite/gas/arm/archv6t2-bad.s: New error case. * testsuite/gas/arm/archv6t2-bad.l: New error match. * testsuite/gas/arm/archv6t2.s: New testcase. * testsuite/gas/arm/archv6t2.d: New expected result. * testsuite/gas/arm/archv8m.s: New testcase. * testsuite/gas/arm/archv8m-base.d: New expected result. * testsuite/gas/arm/archv8m-main.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise.
2016-11-02Enable Intel AVX512_4VNNIW instructionsIgor Tsimbalist16-2/+762
gas/ * config/tc-i386.c: (cpu_arch) Add .avx512_4vnniw. (cpu_noarch): Add noavx512_4vnniw. * doc/c-i386.texi: Document avx512_4vnniw, noavx512_4vnniw. * testsuite/gas/i386/i386.exp: Run AVX512_4VNNIW tests. * testsuite/gas/i386/avx512_4vnniwd_vl-intel.d: New test. * testsuite/gas/i386/avx512_4vnniwd_vl.d: Ditto. * testsuite/gas/i386/avx512_4vnniwd_vl.s: Ditto. * testsuite/gas/i386/avx512_4vnniwd-intel.d: Ditto. * testsuite/gas/i386/avx512_4vnniwd.d: Ditto. * testsuite/gas/i386/avx512_4vnniwd.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd_vl-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd_vl.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd_vl.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4vnniwd.s: Ditto. opcodes/ * i386-dis.c (enum): Add PREFIX_EVEX_0F3852, PREFIX_EVEX_0F3853. * i386-dis-evex.h (evex_table): Updated. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_4VNNIW_FLAGS, CPU_ANY_AVX512_4VNNIW_FLAGS. Update CPU_ANY_AVX512F_FLAGS. (cpu_flags): Add CpuAVX512_4VNNIW. * i386-opc.h (enum): (AVX512_4VNNIW): New. (i386_cpu_flags): Add cpuavx512_4vnniw. * i386-opc.tbl: Add Intel AVX512_4VNNIW instructions. * i386-init.h: Regenerate. * i386-tbl.h: Ditto.
2016-11-02Enable Intel AVX512_4FMAPS instructionsIgor Tsimbalist24-3/+1124
gas/ * config/tc-i386.c (cpu_arch): Add .avx512_4fmaps. (cpu_noarch): Add noavx512_4fmaps. (process_operands): Handle implicit quad group. * doc/c-i386.texi: Document avx512_4fmaps, noavx512_4fmaps. * testsuite/gas/i386/i386.exp: Add AVX512_4FMAPS tests. * testsuite/gas/i386/avx512_4fmaps_vl-intel.d: New test. * testsuite/gas/i386/avx512_4fmaps_vl.d: Ditto. * testsuite/gas/i386/avx512_4fmaps_vl.s: Ditto. * testsuite/gas/i386/avx512_4fmaps-intel.d: Ditto. * testsuite/gas/i386/avx512_4fmaps.d: Ditto. * testsuite/gas/i386/avx512_4fmaps.s: Ditto. * testsuite/gas/i386/avx512_4fmaps-warn.l: Ditto. * testsuite/gas/i386/avx512_4fmaps-warn.s: Ditto. * testsuite/gas/i386/avx512_4fmaps_vl-warn.l: Ditto. * testsuite/gas/i386/avx512_4fmaps_vl-warn.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps_vl-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps_vl.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps_vl.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps.d: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps-warn.l: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps-warn.s: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps_vl-warn.l: Ditto. * testsuite/gas/i386/x86-64-avx512_4fmaps_vl-warn.s: Ditto. opcodes/ * i386-dis.c. (enum): Add PREFIX_EVEX_0F389A, PREFIX_EVEX_0F389B, PREFIX_EVEX_0F38AA, PREFIX_EVEX_0F38AB. * i386-dis-evex.h (evex_table): Updated. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_4FMAPS_FLAGS, CPU_ANY_AVX512_4FMAPS_FLAGS. Update CPU_ANY_AVX512F_FLAGS. (cpu_flags): Add CpuAVX512_4FMAPS. (opcode_modifiers): Add ImplicitQuadGroup modifier. * i386-opc.h (AVX512_4FMAP): New. (i386_cpu_flags): Add cpuavx512_4fmaps. (ImplicitQuadGroup): New. (i386_opcode_modifier): Add implicitquadgroup. * i386-opc.tbl: Add Intel AVX512_4FMAPS instructions. * i386-init.h: Regenerate. * i386-tbl.h: Ditto.
2016-11-01Add support for RISC-V architecture.Nick Clifton16-7/+2667
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file.
2016-10-27gas/arc: Don't rely on bfd list of cpu type for cpu selectionAndrew Burgess3-91/+131
In the ARC assembler, when a cpu type is specified using the .cpu directive, we rely on the bfd list of arc machine types in order to validate the cpu name passed in. This validation is only used in order to check that the cpu type passed to the .cpu directive matches any machine type selected earlier on the command line. Once that initial check has passed a full check is performed using the assemblers internal list of know cpu types. The problem is that the assembler knows about more cpu types than bfd, some cpu types known by the assembler are actually aliases for a base cpu type plus a specific set of assembler extensions. One such example is NPS400, though more could be added later. This commit removes the need for the assembler to use the bfd list of machine types for validation. Instead the error checking, to ensure that any value passed to a '.cpu' directive matches any earlier command line selection, is moved into the function arc_select_cpu. I have taken the opportunity to bundle the 4 separate static globals that describe the currently selected machine type into a single structure (called selected_cpu). gas/ChangeLog: * config/tc-arc.c (arc_target): Delete. (arc_target_name): Delete. (arc_features): Delete. (arc_mach_type): Delete. (mach_type_specified_p): Delete. (enum mach_selection_type): New enum. (mach_selection_mode): New static global. (selected_cpu): New static global. (arc_eflag): Rename to ... (arc_initial_eflag): ...this, and make const. (arc_select_cpu): Update comment, new parameter, check how previous machine type selection was made, and record this selection. Use selected_cpu instead of old globals. (arc_option): Remove use of arc_get_mach, instead use arc_select_cpu to validate machine type selection. Use selected_cpu over old globals. (allocate_tok): Use selected_cpu over old globals. (find_opcode_match): Likewise. (assemble_tokens): Likewise. (arc_cons_fix_new): Likewise. (arc_extinsn): Likewise. (arc_extcorereg): Likewise. (md_begin): Update default machine type selection, use selected_cpu over old globals. (md_parse_option): Update machine type selection option handling, use selected_cpu over old globals. * testsuite/gas/arc/nps400-0.s: Add .cpu directive. bfd/ChangeLog: * cpu-arc.c (arc_get_mach): Delete.
2016-10-26Revert "bison warning fixes"Alan Modra3-2/+8
This reverts commit 95e61695c199a07c832153cea25ae9c331d16a3c. People still want to use older versions of bison, apparently. Revert 2016-10-06 Alan Modra <amodra@gmail.com> * config/rl78-parse.y: Do use old %name-prefix syntax. * config/rx-parse.y: Likewise.
2016-10-21X86: Remove pcommit instructionH.J. Lu10-84/+13
Remove x86 pcommit instruction support, which has been deprecated: https://software.intel.com/en-us/blogs/2016/09/12/deprecate-pcommit-instruction gas/ * config/tc-i386.c (cpu_arch): Remove .pcommit. * doc/c-i386.texi: Likewise. * testsuite/gas/i386/i386.exp: Remove pcommit tests. * testsuite/gas/i386/pcommit-intel.d: Removed. * testsuite/gas/i386/pcommit.d: Likewise. * testsuite/gas/i386/pcommit.s: Likewise. * testsuite/gas/i386/x86-64-pcommit-intel.d: Likewise. * testsuite/gas/i386/x86-64-pcommit.d: Likewise. * testsuite/gas/i386/x86-64-pcommit.s: Likewise. opcodes/ * i386-dis.c (PREFIX_RM_0_0FAE_REG_7): Removed. (prefix_table): Remove the PREFIX_RM_0_0FAE_REG_7 entry. (rm_table): Update the RM_0FAE_REG_7 entry. * i386-gen.c (cpu_flag_init): Remove CPU_PCOMMIT_FLAGS. (cpu_flags): Remove CpuPCOMMIT. * i386-opc.h (CpuPCOMMIT): Removed. (i386_cpu_flags): Remove cpupcommit. * i386-opc.tbl: Remove pcommit. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2016-10-20Check invalid mask registersH.J. Lu4-0/+30
In 32-bit, the REX_B bit in the 3-byte VEX prefix is ignored and the the highest bit in VEX.vvvv is either 1 or ignored. In 64-bit, we need to check invalid mask registers. gas/ PR binutis/20705 * testsuite/gas/i386/i386.exp: Run x86-64-opcode-bad. * testsuite/gas/i386/x86-64-opcode-bad.d: New file. * testsuite/gas/i386/x86-64-opcode-bad.s: Likewise. opcodes/ PR binutis/20705 * i386-dis.c (get_valid_dis386): Ignore the REX_B bit and the highest bit in VEX.vvvv for the 3-byte VEX prefix in 32-bit mode. Don't check vex.register_specifier in 32-bit mode. (OP_E_register): Check invalid mask registers. (OP_G): Likewise. (OP_VEX): Likewise.
2016-10-19[GAS][ARM]Generate unpredictable warning for pc used in data processing ↵Renlin Li5-0/+103
instructions with register-shifted register operand. gas/ 2016-10-19 Renlin Li <renlin.li@arm.com> * config/tc-arm.c (encode_arm_shift): Generate unpredictable warning for register-shifted register instructions. * testsuite/gas/arm/shift-bad-pc.d: New. * testsuite/gas/arm/shift-bad-pc.l: New. * testsuite/gas/arm/shift-bad-pc.s: New.
2016-10-17Fixed matching in newly added test.Cupertino Miranda2-1/+5
gas/ChangeLog: 2016-10-17 Cupertino Miranda <cmiranda@synopsys.com> * testsuite/arc/dis-inv.d: Fixed target match.
2016-10-17Removed pseudo invalid instructions opcodes.Cupertino Miranda3-0/+21
The disassember was generating invXXX instructions for cases when in reality we had llockd or scondd instrutions. opcodes/ChangeLog: Cupertino Miranda <cmiranda@synopsys.com> arc-tbl.h: Removed any "inv.+" instructions from the table. gas/ChangeLog: Cupertino Miranda <cmiranda@synopsys.com> testsuite/arc/dis-inv.s: Test to validate patch. testsuite/arc/dis-inv.d: Likewise.
2016-10-14[ARC] Disassembler: fix LIMM detection for short instructions.Claudiu Zissulescu5-0/+47
The ARC (short) instructions are using a special register number to indicate is the instruction uses a long immediate (LIMM). In the case of short instruction, this LIMM indicator depends on the ISA version used. Thus, for ARCv1 processors, the LIMM indicator is 0x3E, the same value used in "long" instructions. However, for the ARCv2 processors, this LIMM indicator is 0x1E. This patch fixes the LIMM detection for ARCv1 ISA and adds two tests. gas/ 2016-10-13 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/shortlimm_a7.d: New file. * testsuite/gas/arc/shortlimm_a7.s: Likewise. * testsuite/gas/arc/shortlimm_hs.d: Likewise. * testsuite/gas/arc/shortlimm_hs.s: Likewise. include/ 2016-10-13 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (ARC_OPCODE_ARCV2): New define. opcodes/ 2016-10-13 Claudiu Zissulescu <claziss@synopsys.com> * arc-dis.c (find_format_from_table): Discriminate LIMM indicator usage on ISA basis.
2016-10-11Enhance objdump so that it will use .got, .plt and .plt.got section symbols ↵Nick Clifton2-2/+6
when disassembling, and it will use dynamic relocs to interpret entries in the PLT and GOT. binutils * objdump.c (is_significant_symbol_name): New function. (remove_useless_symbols): Do not remove significanr symbols. (find_symbol_for_address): If an exact match for the specified address has not been found, try scanning the dynamic relocs to see if one of these matches the address. If so, use the symbol associated with the reloc. (objdump_print_addr_with_symbol): Do not print offsets to symbols with no value. (disassemble_section): Only use dynamic relocs if the user requested this. (disassemble_data): Always load dynamic relocs if they are available. ld * ld-aarch64/emit-relocs-515-be.d: Adjust output to match change in objdump. * ld-aarch64/emit-relocs-515.d: Likewise. * ld-aarch64/emit-relocs-516-be.d: Likewise. * ld-aarch64/emit-relocs-516.d: Likewise. * ld-aarch64/farcall-b-plt.d: Likewise. * ld-aarch64/farcall-bl-plt.d: Likewise. * ld-aarch64/gc-plt-relocs.d: Likewise. * ld-aarch64/tls-desc-ie.d: Likewise. * ld-aarch64/tls-tiny-desc.d: Likewise. * ld-aarch64/tls-tiny-gd.d: Likewise. * ld-aarch64/tls-tiny-ie.d: Likewise. * ld-arm/arm-app-abs32.d: Likewise. * ld-arm/arm-app.d: Likewise. * ld-arm/arm-lib-plt32.d: Likewise. * ld-arm/arm-lib.d: Likewise. * ld-arm/armthumb-lib.d: Likewise. * ld-arm/cortex-a8-fix-b-plt.d: Likewise. * ld-arm/cortex-a8-fix-bcc-plt.d: Likewise. * ld-arm/cortex-a8-fix-bl-plt.d: Likewise. * ld-arm/cortex-a8-fix-bl-rel-plt.d: Likewise. * ld-arm/cortex-a8-fix-blx-plt.d: Likewise. * ld-arm/farcall-mixed-app-v5.d: Likewise. * ld-arm/farcall-mixed-app.d: Likewise. * ld-arm/farcall-mixed-app2.d: Likewise. * ld-arm/farcall-mixed-lib-v4t.d: Likewise. * ld-arm/farcall-mixed-lib.d: Likewise. * ld-arm/ifunc-10.dd: Likewise. * ld-arm/ifunc-14.dd: Likewise. * ld-arm/ifunc-15.dd: Likewise. * ld-arm/ifunc-3.dd: Likewise. * ld-arm/ifunc-4.dd: Likewise. * ld-arm/ifunc-9.dd: Likewise. * ld-arm/long-plt-format.d: Likewise. * ld-arm/mixed-app-v5.d: Likewise. * ld-arm/mixed-app.d: Likewise. * ld-arm/mixed-lib.d: Likewise. * ld-arm/tls-lib-loc.d: Likewise. * ld-cris/dso-pltdis1.d: Likewise. * ld-cris/dso-pltdis2.d: Likewise. * ld-cris/dso12-pltdis.d: Likewise. * ld-elf/symbolic-func.r: Likewise. * ld-frv/fdpic-pie-1.d: Likewise. * ld-frv/fdpic-pie-2.d: Likewise. * ld-frv/fdpic-pie-6.d: Likewise. * ld-frv/fdpic-pie-7.d: Likewise. * ld-frv/fdpic-pie-8.d: Likewise. * ld-frv/fdpic-shared-1.d: Likewise. * ld-frv/fdpic-shared-2.d: Likewise. * ld-frv/fdpic-shared-3.d: Likewise. * ld-frv/fdpic-shared-4.d: Likewise. * ld-frv/fdpic-shared-5.d: Likewise. * ld-frv/fdpic-shared-6.d: Likewise. * ld-frv/fdpic-shared-7.d: Likewise. * ld-frv/fdpic-shared-8.d: Likewise. * ld-frv/fdpic-shared-local-2.d: Likewise. * ld-frv/fdpic-shared-local-8.d: Likewise. * ld-frv/fdpic-static-1.d: Likewise. * ld-frv/fdpic-static-2.d: Likewise. * ld-frv/fdpic-static-6.d: Likewise. * ld-frv/fdpic-static-7.d: Likewise. * ld-frv/fdpic-static-8.d: Likewise. * ld-frv/tls-dynamic-2.d: Likewise. * ld-frv/tls-initial-shared-2.d: Likewise. * ld-frv/tls-relax-shared-2.d: Likewise. * ld-frv/tls-shared-2.d: Likewise. * ld-i386/plt-nacl.pd: Likewise. * ld-i386/plt-pic-nacl.pd: Likewise. * ld-i386/plt-pic.pd: Likewise. * ld-i386/plt.pd: Likewise. * ld-i386/pr19636-1d-nacl.d: Likewise. * ld-i386/pr19636-1d.d: Likewise. * ld-i386/pr19636-2c-nacl.d: Likewise. * ld-i386/pr19636-2c.d: Likewise. * ld-ifunc/ifunc-21-x86-64.d: Likewise. * ld-ifunc/ifunc-22-x86-64.d: Likewise. * ld-ifunc/pr17154-i386.d: Likewise. * ld-ifunc/pr17154-x86-64.d: Likewise. * ld-m68k/plt1-68020.d: Likewise. * ld-m68k/plt1-cpu32.d: Likewise. * ld-m68k/plt1-isab.d: Likewise. * ld-m68k/plt1-isac.d: Likewise. * ld-metag/shared.d: Likewise. * ld-metag/stub_pic_app.d: Likewise. * ld-metag/stub_pic_shared.d: Likewise. * ld-metag/stub_shared.d: Likewise. * ld-s390/tlsbin_64.dd: Likewise. * ld-s390/tlspic_64.dd: Likewise. * ld-tic6x/shlib-1.dd: Likewise. * ld-tic6x/shlib-1b.dd: Likewise. * ld-tic6x/shlib-1rb.dd: Likewise. * ld-tic6x/shlib-app-1.dd: Likewise. * ld-tic6x/shlib-app-1b.dd: Likewise. * ld-tic6x/shlib-app-1r.dd: Likewise. * ld-tic6x/shlib-app-1rb.dd: Likewise. * ld-tic6x/shlib-noindex.dd: Likewise. * ld-vax-elf/export-class-data.dd: Likewise. * ld-vax-elf/plt-local-lib.dd: Likewise. * ld-vax-elf/plt-local.dd: Likewise. * ld-x86-64/bnd-ifunc-2.d: Likewise. * ld-x86-64/bnd-plt-1.d: Likewise. * ld-x86-64/gotpcrel1.dd: Likewise. * ld-x86-64/libno-plt-1b.dd: Likewise. * ld-x86-64/load1c-nacl.d: Likewise. * ld-x86-64/load1c.d: Likewise. * ld-x86-64/load1d-nacl.d: Likewise. * ld-x86-64/load1d.d: Likewise. * ld-x86-64/mov1a.d: Likewise. * ld-x86-64/mov1b.d: Likewise. * ld-x86-64/mov1c.d: Likewise. * ld-x86-64/mov1d.d: Likewise. * ld-x86-64/mov2a.d: Likewise. * ld-x86-64/mov2b.d: Likewise. * ld-x86-64/mov2c.d: Likewise. * ld-x86-64/mov2d.d: Likewise. * ld-x86-64/mpx3.dd: Likewise. * ld-x86-64/mpx4.dd: Likewise. * ld-x86-64/no-plt-1a.dd: Likewise. * ld-x86-64/no-plt-1b.dd: Likewise. * ld-x86-64/no-plt-1c.dd: Likewise. * ld-x86-64/no-plt-1e.dd: Likewise. * ld-x86-64/no-plt-1f.dd: Likewise. * ld-x86-64/no-plt-1g.dd: Likewise. * ld-x86-64/plt-main-bnd.dd: Likewise. * ld-x86-64/plt-nacl.pd: Likewise. * ld-x86-64/plt.pd: Likewise. * ld-x86-64/pr18591.d: Likewise. * ld-x86-64/pr19609-1c.d: Likewise. * ld-x86-64/pr19609-1e.d: Likewise. * ld-x86-64/pr19609-1j.d: Likewise. * ld-x86-64/pr19609-1l.d: Likewise. * ld-x86-64/pr19609-1m.d: Likewise. * ld-x86-64/pr19609-5b.d: Likewise. * ld-x86-64/pr19609-5c.d: Likewise. * ld-x86-64/pr19609-5e.d: Likewise. * ld-x86-64/pr19609-6b.d: Likewise. * ld-x86-64/pr19609-7b.d: Likewise. * ld-x86-64/pr19609-7d.d: Likewise. * ld-x86-64/pr19636-2d.d: Likewise. * ld-x86-64/pr20093-1.d: Likewise. * ld-x86-64/pr20093-2.d: Likewise. * ld-x86-64/pr20253-1b.d: Likewise. * ld-x86-64/pr20253-1d.d: Likewise. * ld-x86-64/pr20253-1f.d: Likewise. * ld-x86-64/pr20253-1h.d: Likewise. * ld-x86-64/pr20253-1j.d: Likewise. * ld-x86-64/pr20253-1l.d: Likewise. * ld-x86-64/protected3.d: Likewise. * ld-x86-64/tlsbin.dd: Likewise. * ld-x86-64/tlsbin2.dd: Likewise. * ld-x86-64/tlsbindesc.dd: Likewise. * ld-x86-64/tlsdesc-nacl.pd: Likewise. * ld-x86-64/tlsdesc.dd: Likewise. * ld-x86-64/tlsdesc.pd: Likewise. * ld-x86-64/tlsgd10.dd: Likewise. * ld-x86-64/tlsgd5.dd: Likewise. * ld-x86-64/tlsgd6.dd: Likewise. * ld-x86-64/tlsgd8.dd: Likewise. * ld-x86-64/tlsgdesc.dd: Likewise. * ld-x86-64/tlspic.dd: Likewise. * ld-x86-64/tlspic2.dd: Likewise. 2016-10-11 Nick Clifton <nickc@redhat.com> PR ld/20535 * emultempl/elf32.em (_search_needed): Add support for pseudo environment variables supported by ld.so. Namely $ORIGIN, $LIB and $PLATFORM. * configure.ac: Add getauxval to list AC_CHECK_FUNCS list. * config.in: Regenerate. * configure: Regenerate. 2016-10-11 Alan Modra <amodra@gmail.com> * ldlang.c (lang_do_assignments_1): Descend into output section statements that do not yet have bfd sections. Set symbol section temporarily for symbols defined in such statements to the undefined section. Don't error on data or reloc statements until final phase. * ldexp.c (exp_fold_tree_1 <etree_assign>): Handle bfd_und_section in expld.section. * testsuite/ld-mmix/bpo-10.d: Adjust. * testsuite/ld-mmix/bpo-11.d: Adjust. 2016-10-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * emulparams/elf64_s390.sh: Move binary start to 16M. * testsuite/ld-s390/tlsbin_64.dd: Adjust testcases accordingly. * testsuite/ld-s390/tlsbin_64.rd: Likewise. 2016-10-07 Alan Modra <amodra@gmail.com> * ldexp.c (MAX): Define. (exp_unop, exp_binop, exp_trinop): Alloc at least enough for etree_type.value. 2016-10-07 Alan Modra <amodra@gmail.com> * testsuite/lib/ld-lib.exp (is_generic_elf): New, extracted from.. * testsuite/ld-elf/elf.exp: ..here. 2016-10-06 Ludovic Court?s <ludo@gnu.org> * emulparams/elf32bmipn32-defs.sh: Shift quote of "x$EMULATION_NAME" to the left to work around <http://ftp.gnu.org/gnu/bash/bash-4.2-patches/bash42-007>. 2016-10-06 Alan Modra <amodra@gmail.com> * lexsup.c: Spell fall through comments consistently and add missing fall through comments. 2016-10-06 Alan Modra <amodra@gmail.com> * plugin.c (asymbol_from_plugin_symbol): Avoid compiler warning by adding return. 2016-10-04 Alan Modra <amodra@gmail.com> * ld.texinfo (Expression Section): Update result of arithmetic expressions. * ldexp.c (arith_result_section): New function. (fold_binary): Use it. 2016-10-04 Alan Modra <amodra@gmail.com> * ldexp.c (exp_value_fold): New function. (exp_unop, exp_binop, exp_trinop): Use it. 2016-09-30 Alan Modra <amodra@gmail.com> * scripttempl/v850.sc: Don't reference __ctbp, __ep, __gp when not relocating. * scripttempl/v850_rh850.sc: Likewise. 2016-09-30 Alan Modra <amodra@gmail.com> PR ld/20528 * testsuite/ld-elf/pr20528a.d: xfail generic elf targets. Allow multiple .text sections for hppa-linux. * testsuite/ld-elf/pr20528b.d: Likewise. 2016-09-30 Alan Modra <amodra@gmail.com> * ldmain.c (default_bfd_error_handler): New function pointer. (ld_bfd_error_handler): New function. (main): Arrange to call it on bfd errors/warnings. (ld_bfd_assert_handler): Enable tail call. 2016-09-30 Alan Modra <amodra@gmail.com> * ldlang.c (ignore_bfd_errors): Update params. 2016-09-29 H.J. Lu <hongjiu.lu@intel.com> PR ld/20528 * emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Don't merge 2 sections with different SHF_EXCLUDE. * testsuite/ld-elf/pr20528a.d: New file. * testsuite/ld-elf/pr20528a.s: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr20528b.s: Likewise. 2016-09-28 Christophe Lyon <christophe.lyon@linaro.org> PR ld/20608 * testsuite/ld-arm/arm-elf.exp: Handle new testcase. * testsuite/ld-arm/farcall-mixed-app2.d: New file. * testsuite/ld-arm/farcall-mixed-app2.r: Likewise. * testsuite/ld-arm/farcall-mixed-app2.s: Likewise. * testsuite/ld-arm/farcall-mixed-app2.sym: Likewise. 2016-09-26 Vlad Zakharov <vzakhar@synopsys.com> * Makefile.in: Regenerate. * configure: Likewise. 2016-09-26 Alan Modra <amodra@gmail.com> * testsuite/ld-powerpc/attr-gnu-4-4.s: Delete. * testsuite/ld-powerpc/attr-gnu-4-14.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-24.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-34.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-41.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning. * testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output. * testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise. * testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise. * testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests. 2016-09-23 Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp> PR ld/20595 * testsuite/ld-arm/unwind-4.d: Add -q option to linker command line and -r option to objdump command line. Match emitted relocs to make sure that superflous relocs are not generated. 2016-09-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * emulparams/elf64_s390.sh: Change TEXT_START_ADDR to 256MB. * testsuite/ld-s390/tlsbin_64.dd: Adjust testcase accordingly. * testsuite/ld-s390/tlsbin_64.rd: Likewise. 2016-09-22 Nick Clifton <nickc@redhat.com> * emultempl/elf32.em (_try_needed): In verbose mode, report failed attempts to find a needed library. 2016-09-21 Richard Sandiford <richard.sandiford@arm.com> * testsuite/ld-aarch64/emit-relocs-28.d: Expect spaces after "," in addresses. * testsuite/ld-aarch64/emit-relocs-301-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-301.d: Likewise. * testsuite/ld-aarch64/emit-relocs-302-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-302.d: Likewise. * testsuite/ld-aarch64/emit-relocs-310-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-310.d: Likewise. * testsuite/ld-aarch64/emit-relocs-313.d: Likewise. * testsuite/ld-aarch64/emit-relocs-515-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-515.d: Likewise. * testsuite/ld-aarch64/emit-relocs-516-be.d: Likewise. * testsuite/ld-aarch64/emit-relocs-516.d: Likewise. * testsuite/ld-aarch64/emit-relocs-531.d: Likewise. * testsuite/ld-aarch64/emit-relocs-532.d: Likewise. * testsuite/ld-aarch64/emit-relocs-533.d: Likewise. * testsuite/ld-aarch64/emit-relocs-534.d: Likewise. * testsuite/ld-aarch64/emit-relocs-535.d: Likewise. * testsuite/ld-aarch64/emit-relocs-536.d: Likewise. * testsuite/ld-aarch64/emit-relocs-537.d: Likewise. * testsuite/ld-aarch64/emit-relocs-538.d: Likewise. * testsuite/ld-aarch64/erratum835769.d: Likewise. * testsuite/ld-aarch64/erratum843419.d: Likewise. * testsuite/ld-aarch64/farcall-b-plt.d: Likewise. * testsuite/ld-aarch64/farcall-bl-plt.d: Likewise. * testsuite/ld-aarch64/gc-plt-relocs.d: Likewise. * testsuite/ld-aarch64/ifunc-21.d: Likewise. * testsuite/ld-aarch64/ifunc-7c.d: Likewise. * testsuite/ld-aarch64/tls-desc-ie.d: Likewise. * testsuite/ld-aarch64/tls-large-desc-be.d: Likewise. * testsuite/ld-aarch64/tls-large-desc.d: Likewise. * testsuite/ld-aarch64/tls-large-ie-be.d: Likewise. * testsuite/ld-aarch64/tls-large-ie.d: Likewise. * testsuite/ld-aarch64/tls-relax-all.d: Likewise. * testsuite/ld-aarch64/tls-relax-gd-ie.d: Likewise. * testsuite/ld-aarch64/tls-relax-gdesc-ie-2.d: Likewise. * testsuite/ld-aarch64/tls-relax-gdesc-ie.d: Likewise. * testsuite/ld-aarch64/tls-relax-large-desc-ie-be.d: Likewise. * testsuite/ld-aarch64/tls-relax-large-desc-ie.d: Likewise. * testsuite/ld-aarch64/tls-tiny-desc.d: Likewise. * testsuite/ld-aarch64/tls-tiny-gd.d: Likewise. gas * gas/arm/tls.d: Adjust output to match change in objdump.
generated by cgit v1.1 at 2025-01-09 15:23:04 +0000