Age | Commit message (Collapse) | Author | Files | Lines |
|
Internal naming of functions / data as well as commentary mixes lines
and statements. It is presumably this confusion which has led to the
wrong use of ignore_rest_of_line() when dealing with line comments in
read_a_source_file(). We shall not (silently) produce different output
depending on whether -f is passed (for suitable input).
Introduce two new helper macros, intended to be used in favor of open-
coded accesses to is_end_of_line[]. To emphasize the difference, convert
ignore_rest_of_line() right away, including adjustments to its comments.
Since most targets have # in line_comment_chars[], add a target-
independent test for that, plus an x86-only one also checking for non-#
to work as intended.
|
|
PR 31964
|
|
PR 31964
|
|
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
|
|
get_stab_string_offset currently creates the stabstr section if not
already present, in the process keeping a reference to the malloc'd
section name string. Really, the name belongs in bfd_alloc'd memory
or some obstack so that it doesn't show as a memory leak on exit.
s_stab_generic at least does allocate the name for the stab section on
an obstack, but doesn't tidy that as well as it could. Return paths
after issuing a warning don't release the memory, nor the memory for
the "string" copy.
This patch fixes these problems. s_stab_generic is rearranged so that
creation of the sections occurs earlier, before any potential uses of
the note obstack during expression parsing. That makes it possible to
always free the section name strings unless used to create new
sections. I've also avoided get_absolute_expression_and_terminator
as I see that function might skip over end-of-line, and lack of a
--input_line_pointer might have caused the following source line to be
ignored. (Other uses of this function in gas are OK.)
* config/obj-coff.c (obj_coff_init_stab_section): Add stabstr
param. Pass to get_stab_string_offset rather than name of
section.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
(elf_init_stab_section): Adjust.
* config/obj-coff.h (INIT_STAB_SECTION): Update.
(obj_coff_init_stab_section): Update prototype.
* config/obj-som.h: Similarly.
* config/obj-elf.h: Similarly.
* config/obj-multi.h (INIT_STAB_SECTION): Update.
* obj.h (struct format_ops <init_stab_section>): Update.
* read.h (get_stab_string_offset): Update prototype.
* stabs.c (cached_sec): Delete.
(stabs_begin): Adjust to suit.
(get_stab_string_offset): Add stabstr param, delete stabstr_name
and free_stabstr_secname params. Don't make stabstr section
here.
(eat_comma): New function.
(s_stab_generic): Replace stab_secname_obstack_end param with
bool freenames. Move creation of stab and stabstr sections
earlier, so the names can be freed earlier before possible use
of notes obstack during expression parsing. Tidy error paths
ensuring "string" is freed. Use get_absolute_expression in
place of get_absolute_expression_and_terminator.
(s_stab): Adjust.
(s_xstab): Use notes_concat to make stabstr section name.
|
|
This fixes a bug in .include and .incbin where given an absolute path
the -I dirs would be searched for the path.
* read.c (include_dir_count, include_dir_maxlen): Make them size_t.
(search_and_open): New function.
(s_incbin, s_include): Use search_and_open.
(init_include_dir): New function.
(add_include_dir): Don't set initial "." dir here.
* read.h (include_dir_count, include_dir_maxlen): Update.
(init_include_dir, search_and_open): Declare.
* as.c (gas_early_init): Call init_include_dir.
* config/tc-rx.c (rx_include): Avoid warning by using size_t.
* config/tc-tic54x.c (tic54x_set_default_include): Simplify and
use notes for include path.
(tic54x_mlib): Use search_and_open.
|
|
Move all the function local static state variables to file scope,
in order to tidy memory on exit and to reinit everything for that
annoying oss-fuzz. Also fix a couple memory leaks.
* read.h (read_begin, read_end): Declare.
* read.c (read_begin): Call stabs_begin.
(read_end): Call stabs_end.
* stabs.c (stabs_begin, stabs_end): New functions.
(in_dot_func_p): Delete, use current_function_label instead.
(cached_sec): Move from s_stab_generic.
(last_asm_file, file_label_count): Move from generate_asm_file.
(line_label_count, prev_lineno, prev_line_file): Move from
stabs_generate_asm_lineno.
(void_emitted_p): Move from stabs_generate_asm_func.
(endfunc_label_count): Move from stabs_generate_asm_endfunc.
(stabs_generate_asm_lineno): Simplify setting of
prev_line_file.
(stabs_generate_asm_func): Don't leak current_function_label.
(stabs_generate_asm_endfunc): Likewise.
|
|
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
|
|
* macro.c (macro_end): New function.
* macro.h (macro_end): Declare.
* read.c (read_end, poend): New functions.
* read.h (read_end): Declare.
* symbols.c (symbol_end): New function.
* symbols.h (symbol_end): Declare.
* output-file.c (output_file_close): Call new *_end functions.
|
|
do_repeat_with_expander() already deals with the "no expander" case
quite fine, so there's really little point having two functions. What it
lacks compared with do_repeat() is a call to sb_build(), which can
simply be moved (and the then redundant sb_new() be avoided). Along with
this moving also flip if the main if()'s condition such that the "no
expander" case is handled first.
|
|
These were used originally to represent "# <line> <file>" constructs
inserted by (typically) compilers when pre-processing. Quite some time
ago they were replaced by .linefile though. Since the original
directives were never documented, we ought to be able to remove support
for them. As a result in a number of case function parameter aren't used
anymore and can hence be dropped.
|
|
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
|
|
* as.h (POISON_BFD_BOOLEAN): Define.
* as.c, * as.h, * atof-generic.c, * config/atof-ieee.c,
* config/bfin-aux.h, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-elf.h, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arc.h, * config/tc-arm.c, * config/tc-arm.h,
* config/tc-avr.c, * config/tc-avr.h, * config/tc-bfin.c,
* config/tc-bfin.h, * config/tc-bpf.c, * config/tc-cris.c,
* config/tc-csky.c, * config/tc-csky.h, * config/tc-d10v.c,
* config/tc-d10v.h, * config/tc-d30v.c, * config/tc-d30v.h,
* config/tc-dlx.c, * config/tc-dlx.h, * config/tc-epiphany.c,
* config/tc-epiphany.h, * config/tc-fr30.c, * config/tc-fr30.h,
* config/tc-frv.c, * config/tc-frv.h, * config/tc-ft32.c,
* config/tc-ft32.h, * config/tc-h8300.c, * config/tc-hppa.c,
* config/tc-i386-intel.c, * config/tc-i386.c, * config/tc-ia64.c,
* config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-iq2000.h,
* config/tc-lm32.c, * config/tc-lm32.h, * config/tc-m32c.c,
* config/tc-m32c.h, * config/tc-m32r.c, * config/tc-m32r.h,
* config/tc-m68hc11.c, * config/tc-m68k.c, * config/tc-mcore.c,
* config/tc-mcore.h, * config/tc-mep.c, * config/tc-mep.h,
* config/tc-metag.c, * config/tc-metag.h,
* config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mips.h,
* config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c,
* config/tc-mn10300.h, * config/tc-moxie.c, * config/tc-msp430.c,
* config/tc-msp430.h, * config/tc-mt.c, * config/tc-mt.h,
* config/tc-nds32.c, * config/tc-nds32.h, * config/tc-nios2.c,
* config/tc-ns32k.c, * config/tc-or1k.c, * config/tc-or1k.h,
* config/tc-pdp11.c, * config/tc-ppc.c, * config/tc-pru.c,
* config/tc-pru.h, * config/tc-riscv.c, * config/tc-riscv.h,
* config/tc-rx.c, * config/tc-rx.h, * config/tc-s12z.c,
* config/tc-s12z.h, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score.h, * config/tc-score7.c, * config/tc-sh.c,
* config/tc-sh.h, * config/tc-spu.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tic6x.h, * config/tc-tilegx.c,
* config/tc-tilepro.c, * config/tc-v850.c, * config/tc-v850.h,
* config/tc-visium.c, * config/tc-visium.h, * config/tc-wasm32.c,
* config/tc-wasm32.h, * config/tc-xc16x.c, * config/tc-xgate.c,
* config/tc-xstormy16.c, * config/tc-xstormy16.h,
* config/tc-xtensa.c, * config/tc-xtensa.h, * config/tc-z80.c,
* config/tc-z8k.c, * config/xtensa-istack.h,
* config/xtensa-relax.c, * config/xtensa-relax.h, * dw2gencfi.c,
* dwarf2dbg.c, * dwarf2dbg.h, * expr.c, * expr.h, * frags.c,
* frags.h, * listing.c, * macro.c, * output-file.c, * read.c,
* read.h, * stabs.c, * symbols.c, * write.c: Replace bfd_boolean
with bool, FALSE with false, and TRUE with true.
|
|
|
|
instructions in an architeture neutral manner.
* read.c (s_nop): New function. Handles the .nop directive.
(potable): Add entry for "nop".
(s_nops): Code tidy.
* read.h (s_nop): Add prototype.
* config/tc-bpf.h (md_single_noop_insn): Define.
* config/tc-mmix.h (md_single_noop_insn): Define.
* config/tc-or1k.h (md_single_noop_insn): Define.
* config/tc-s12z.c (md_assemble): Preserve the input line pointer,
rather than corrupting it.
* write.c (relax_segment): Update error message regarding
non-absolute values passed to .fill and .nops.
* NEWS: Mention the new directive.
* doc/as.texi: Document the new directive.
* doc/internals.texi: Document the new internal macros used to
implement the new directive.
* testsuite/gas/all/nop.s: New test.
* testsuite/gas/all/nop.d: New test control file.
* testsuite/gas/all/gas.exp: Run the new test.
* testsuite/gas/elf/dwarf-5-nop-for-line-table.s: New test.
* testsuite/gas/elf/dwarf-5-nop-for-line-table.d: New test
control file.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/i386/space1.l: Adjust expected output.
|
|
For DWARF4 DW_AT_high_pc can be expressed as constant offset from
DW_AT_low_pc which saves a relocation. Use DW_FORM_udate (uleb128)
to keep the constant value as small as possible.
gas/ChangeLog:
* dwarf2dbg.c (out_debug_abbrev): When DWARF2_VERSION >= 4, use
DW_FORM_udata for DW_AT_high_pc.
(out_debug_info): Use emit_leb128_expr for DW_AT_high_pc, when
DWARF2_VERSION >= 4.
* read.c (emit_leb128_exp): No longer static.
* read.h (emit_leb128_exp): Define.
|
|
|
|
|
|
This removes ineffectual and wrong code caching section names in
gas/stabs.c. Code like
seg = subseg_new (name, 0);
...
if (seg->name == name)
seg->name = xstrdup (name);
with the idea of being able to unconditionally free "name" later no
longer works. "name" is referenced by the section hash table as well
as in the section->name field. It would be possible to use
"bfd_rename_section (stdoutput, seg, xstrdup (name))", but instead I
opted for a fairly straight-forward approach of adding extra
parameters to two functions to indicate section name strings should be
freed if possible.
PR 23938
* read.h (get_stab_string_offset): Update prototype.
* stabs.c (get_stab_string_offset): Add free_stabstr_secname
parameter. Free stabstr_secname if unused as section name.
Don't xstrdup name when used.
(s_stab_generic): Remove forward declaration. Add
stab_secname_obstack_end param. Reference notes obstack via
macros. Delete cached_secname. Adjust get_stab_string_offset
call. Free stab_secname if unused as section name.
(s_stab): Adjust s_stab_generic call.
(s_xstab): Likewise. Delete saved_secname and saved_strsecname.
* config/obj-elf.c (obj_elf_init_stab_section): Adjust
get_stab_string_offset call.
* config/obj-coff.c (obj_coff_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* testsuite/gas/all/pr23938.s: New test.
* testsuite/gas/all/gas.exp: Run it.
|
|
Since directives of NO_PSEUDO_DOT targets don't have the leading '.'
and "nop" can be a valid instruction, rename .nop directive to .nops
to avoid conflict.
* NEWS: Rename .nop to .nops.
* doc/as.texinfo: Likewise.
* read.c (potable): Add "nops". Remove "nop".
(s_nop): Renamed to ...
(s_nops): This.
* read.h (s_nop): Renamed to ...
(s_nops): This.
* write.c (cvt_frag_to_fill): Rename .nop to .nops.
(md_generate_nops): Likewise.
(relax_segment): Likewise.
* testsuite/gas/i386/nop-1.d: Updated.
* testsuite/gas/i386/nop-1.s: Likewise.
* testsuite/gas/i386/nop-2.d: Likewise.
* testsuite/gas/i386/nop-2.s: Likewise.
* testsuite/gas/i386/nop-3.d: Likewise.
* testsuite/gas/i386/nop-3.s: Likewise.
* testsuite/gas/i386/nop-4.d: Likewise.
* testsuite/gas/i386/nop-4.s: Likewise.
* testsuite/gas/i386/nop-5.d: Likewise.
* testsuite/gas/i386/nop-5.s: Likewise.
* testsuite/gas/i386/nop-6.d: Likewise.
* testsuite/gas/i386/nop-6.s: Likewise.
* testsuite/gas/i386/nop-bad-1.l: Likewise.
* testsuite/gas/i386/nop-bad-1.s: Likewise.
* testsuite/gas/i386/x86-64-nop-1.d: Likewise.
* testsuite/gas/i386/x86-64-nop-2.d: Likewise.
* testsuite/gas/i386/x86-64-nop-3.d: Likewise.
* testsuite/gas/i386/x86-64-nop-4.d: Likewise.
* testsuite/gas/i386/x86-64-nop-5.d: Likewise.
* testsuite/gas/i386/x86-64-nop-6.d: Likewise.
|
|
Implement the '.nop SIZE[, CONTROL]' assembler directive, which emits
SIZE bytes filled with no-op instructions. SIZE is absolute expression.
The optional CONTROL byte controls how no-op instructions should be
generated. If the comma and @var{control} are omitted, CONTROL is
assumed to be zero.
For Intel 80386 and AMD x86-64 targets, CONTROL byte specifies the size
limit of a single no-op instruction. The valid values of CONTROL byte
are between 0 and 8 for 16-bit mode, between 0 and 10 for 32-bit mode,
between 0 and 11 for 64-bit mode. When 0 is used, the no-op size limit
is set to the maximum supported size.
2 new relax states, rs_space_nop and rs_fill_nop, are added to enum
_relax_state, which are similar to rs_space and rs_fill, respectively,
but they fill with no-op instructions, instead of a single byte. A
target backend must override the default md_generate_nops to generate
proper no-op instructions. Otherwise, an error of unimplemented .nop
directive will be issued whenever .nop directive is used.
* NEWS: Mention .nop directive.
* as.h (_relax_state): Add rs_space_nop and rs_fill_nop.
* read.c (potable): Add .nop.
(s_nop): New function.
* read.h (s_nop): New prototype.
* write.c (cvt_frag_to_fill): Handle rs_space_nop and
rs_fill_nop.
(md_generate_nops): New function.
(relax_segment): Likewise.
(write_contents): Use md_generate_nops for rs_fill_nop.
* config/tc-i386.c (alt64_11): New.
(alt64_patt): Likewise.
(md_convert_frag): Handle rs_space_nop.
(i386_output_nops): New function.
(i386_generate_nops): Likewise.
(i386_align_code): Call i386_output_nops.
* config/tc-i386.h (i386_generate_nops): New.
(md_generate_nops): Likewise.
* doc/as.texinfo: Document .nop directive.
* testsuite/gas/i386/i386.exp: Run .nop directive tests.
* testsuite/gas/i386/nop-1.d: New file.
* testsuite/gas/i386/nop-1.s: Likewise.
* testsuite/gas/i386/nop-2.d: Likewise.
* testsuite/gas/i386/nop-2.s: Likewise.
* testsuite/gas/i386/nop-3.d: Likewise.
* testsuite/gas/i386/nop-3.s: Likewise.
* testsuite/gas/i386/nop-4.d: Likewise.
* testsuite/gas/i386/nop-4.s: Likewise.
* testsuite/gas/i386/nop-5.d: Likewise.
* testsuite/gas/i386/nop-5.s: Likewise.
* testsuite/gas/i386/nop-6.d: Likewise.
* testsuite/gas/i386/nop-6.s: Likewise.
* testsuite/gas/i386/nop-bad-1.l: Likewise.
* testsuite/gas/i386/nop-bad-1.s: Likewise.
* testsuite/gas/i386/x86-64-nop-1.d: Likewise.
* testsuite/gas/i386/x86-64-nop-2.d: Likewise.
* testsuite/gas/i386/x86-64-nop-3.d: Likewise.
* testsuite/gas/i386/x86-64-nop-4.d: Likewise.
* testsuite/gas/i386/x86-64-nop-5.d: Likewise.
* testsuite/gas/i386/x86-64-nop-6.d: Likewise.
|
|
|
|
* as.c: Include write.h.
(common_emul_init): Use FAKE_LABEL_NAME.
* ecoff.c (add_file, ecoff_directive_end, ecoff_directive_loc):
Likewise.
(ecoff_build_symbols): Use FAKE_LABEL_CHAR.
* expr.c (get_symbol_name): Use FAKE_LABEL_CHAR. Accept only if
input_from_string is TRUE.
* read.c (input_from_string): New.
(read_symbol_name): Use FAKE_LABEL_CHAR. Accept only if
input_from_string is TRUE.
(temp_ilp): Set input_from_string to TRUE.
(restore_ilp): Set input_from_string to FALSE.
* read.h (input_from_string): Declare.
* symbols.c: Include write.h
(S_IS_LOCAL): Check for FAKE_LABEL_CHAR.
(symbol_relc_make_sym): Fix comment refering to default fake label
string.
* write.h (FAKE_LABEL_CHAR): New.
* config/tc-riscv.h (FAKE_LABEL_CHAR): Define.
* testsuite/gas/all/err-fakelabel.s: New.
|
|
PR 22324
* read.c (s_rept): Use size_t type for count parameter.
(do_repeat): Change type of count parameter to size_t.
Issue an error is the count parameter is negative.
(do_repeat_with_expression): Likewise.
* read.h: Update prototypes for do_repeat and
do_repeat_with_expression.
* doc/as.texinfo (Rept): Document that a zero count is allowed but
negative counts are not.
* config/tc-rx.c (rx_rept): Use size_t type for count parameter.
* config/tc-tic54x.c (tic54x_loop): Cast count parameter to size_t
type.
* testsuite/gas/macros/end.s: Add a test using a negative repeat
count.
* testsuite/gas/macros/end.l: Add expected error message.
|
|
badly formatted input string.
* read.c (temp_ilp): New function. Installs a temporary input
line pointer.
(restore_ilp): New function. Restores the original input line
pointer.
* read.h (temp_ilp): Prototype.
(restore_ilp): Prototype.
* stabs.c (dot_func_p): Use bfd_boolean type.
(generate_asm_file): Use temp_ilp and restore_ilp.
(stabs_generate_asm_lineno): Likewise.
(stabs_generate_asm_endfunc): Likewise.
|
|
|
|
PR gas/20904
* as.h (SKIP_ALL_WHITESPACE): New macro.
* expr.c (operand): Use it.
|
|
opcodes * mcore-opc.h: Add const qualifiers.
* microblaze-opc.h (struct op_code_struct): Likewise.
* sh-opc.h: Likewise.
* tic4x-dis.c (tic4x_print_indirect): Likewise.
(tic4x_print_op): Likewise.
include * opcode/dlx.h (struct dlx_opcode): Add const qualifiers.
* opcode/h8300.h (struct h8_opcode): Likewise.
* opcode/hppa.h (struct pa_opcode): Likewise.
* opcode/msp430.h: Likewise.
* opcode/spu.h (struct spu_opcode): Likewise.
* opcode/tic30.h (struct _register): Likewise.
* opcode/tic4x.h (struct tic4x_register): Likewise.
(struct tic4x_cond): Likewise.
(struct tic4x_indirect): Likewise.
(struct tic4x_inst): Likewise.
* opcode/visium.h (struct reg_entry): Likewise.
gas * config/tc-arc.c: Add const qualifiers.
* config/tc-h8300.c (md_begin): Likewise.
* config/tc-ia64.c (print_prmask): Likewise.
* config/tc-msp430.c (msp430_operands): Likewise.
* config/tc-nds32.c (struct suffix_name): Likewise.
(struct nds32_parse_option_table): Likewise.
(struct nds32_set_option_table): Likewise.
(do_pseudo_pushpopm): Likewise.
(do_pseudo_pushpop_stack): Likewise.
(nds32_relax_relocs): Likewise.
(nds32_flag): Likewise.
(struct nds32_hint_map): Likewise.
(nds32_find_reloc_table): Likewise.
(nds32_match_hint_insn): Likewise.
* config/tc-s390.c: Likewise.
* config/tc-sh.c (get_specific): Likewise.
* config/tc-tic30.c: Likewise.
* config/tc-tic4x.c (tic4x_inst_add): Likewise.
(tic4x_indirect_parse): Likewise.
* config/tc-vax.c (vax_cons): Likewise.
* config/tc-z80.c (struct reg_entry): Likewise.
* config/tc-epiphany.c (md_assemble): Adjust.
(epiphany_assemble): New function.
(epiphany_elf_section_rtn): Call do_align directly.
(epiphany_elf_section_text): Likewise.
* config/tc-ip2k.c (ip2k_elf_section_rtn): Likewise.
(ip2k_elf_section_text): Likewise.
* read.c (do_align): Make it not static.
* read.h (do_align): New prototype.
|
|
* as.c (select_emulation_mode): Add const qualifiers.
* as.h: Likewise.
* config/bfin-defs.h: Likewise.
* config/bfin-parse.y: Likewise.
* config/rx-parse.y: Likewise.
* config/tc-aarch64.c (struct aarch64_option_table): Likewise.
(struct aarch64_cpu_option_table): Likewise.
(struct aarch64_arch_option_table): Likewise.
(struct aarch64_option_cpu_value_table): Likewise.
(struct aarch64_long_option_table): Likewise.
(struct aarch64_option_abi_value_table): Likewise.
* config/tc-arm.c (struct reloc_entry): Likewise.
(tc_gen_reloc): Likewise.
(struct arm_option_table): Likewise.
(struct arm_legacy_option_table): Likewise.
(struct arm_cpu_option_table): Likewise.
(struct arm_arch_option_table): Likewise.
(struct arm_option_extension_value_table): Likewise.
(struct arm_option_fpu_value_table): Likewise.
(struct arm_option_value_table): Likewise.
(struct arm_long_option_table): Likewise.
* config/tc-avr.c (struct avr_opcodes_s): Likewise.
(struct mcu_type_s): Likewise.
(struct exp_mod_s): Likewise.
(avr_operand): Likewise.
(avr_operands): Likewise.
* config/tc-d10v.c (md_begin): Likewise.
* config/tc-dlx.c: Likewise.
* config/tc-fr30.c (fr30_is_colon_insn): Likewise.
* config/tc-ft32.c (parse_condition): Likewise.
* config/tc-h8300.c (do_a_fix_imm): Likewise.
* config/tc-hppa.c (pa_ip): Likewise.
(hppa_regname_to_dw2regnum): Likewise.
* config/tc-i370.c (i370_elf_suffix): Likewise.
* config/tc-i960.c (struct tabentry): Likewise.
* config/tc-m32r.c: Likewise.
* config/tc-m68k.c: Likewise.
* config/tc-m68k.h: Likewise.
* config/tc-mcore.c (parse_psrmod): Likewise.
* config/tc-metag.c (struct metag_core_option): Likewise.
(struct metag_long_option): Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mips.c (macro): Likewise.
* config/tc-mn10200.c: Likewise.
* config/tc-mn10300.c: Likewise.
* config/tc-msp430.c (struct rcodes_s): Likewise.
(struct hcodes_s): Likewise.
(md_parse_option): Likewise.
* config/tc-ns32k.c (struct ns32k_option): Likewise.
(optlist): Likewise.
* config/tc-ppc.c (ppc_elf_suffix): Likewise.
(tc_ppc_regname_to_dw2regnum): Likewise.
* config/tc-ppc.h: Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c (struct cpu_type): Likewise.
* config/tc-sh.c (sh_regname_to_dw2regnum): Likewise.
* config/tc-sparc.c (struct priv_reg_entry): Likewise.
(sparc_ip): Likewise.
* config/tc-spu.c (insn_fmt_string): Likewise.
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
* config/tc-v850.c: Likewise.
* config/tc-visium.c (struct visium_arch_option_table): Likewise.
(struct visium_long_option_table): Likewise.
* config/tc-xgate.c: Likewise.
* config/tc-z8k.c: Likewise.
* read.c (add_include_dir): Likewise.
* read.h: Likewise.
|
|
multiple octets in a single byte.
gas * read.c (finish_bundle): Avoid recording a negative alignment.
(do_align): Use unsigned values for n, len and max. Only create
a frag if the alignment requirement is greater than the minimum
byte alignment. Avoid recording a negative alignment.
(s_align): Use unsigned values where appropriate.
(bss_alloc): Use an unsigned value for the alignment.
(sizeof_sleb128): Add a comment noting that we encode one octet
per byte, regardless of the value of OCTETS_PER_BYTE_POWER.
(emit_leb129_expr): Abort if the emitted encoding was longer than
expected.
* read.h (output_leb128): Update prototype.
(sizeof_leb128): Update prototype.
(bss_alloc): Update prototype.
* write.c (record_alignment): Use an unsigned value for the
alignment. Do not record alignments less than the minimum
alignment for a byte.
* write.h (record_alignment): Update prototype.
|
|
|
|
gas PR gas/18581
* expr.c (get_symbol_end): Rename to get_symbol_name. Add a
return parameter pointing to the start of the symbol. Allow
symbol names enclosed in double quotes.
(restore_line_pointer): New function. Replace the NUL character
inserted into the input stream with the given character. If the
character was a double quote, advance the input pointer.
* expr.h (get_symbol_end): Delete.
(get_symbol_name): Add prototype.
(restore_line_pointer): Prototype.
* read.h (SKIP_WHITESPACE_AFTER_NAME): New macro.
* doc/as.texinfo (Symbol Intro): Document that symbol names can
now be enclosed in double quotes.
* cond.c (s_ifdef): Replace get_symbol_end with get_symbol_name.
Use restore_line_pointer to replace the NUL in the input stream.
Use SKIP_WHITESPACE_AFTER_NAME to skip past the end of a symbol.
Check for the use of double quoted symbol names.
* expr.c: Likewise.
* config/obj-aout.c: Likewise.
* config/obj-coff-seh.c: Likewise.
* config/obj-coff.c: Likewise.
* config/obj-elf.c: Likewise.
* config/obj-evax.c: Likewise.
* config/obj-macho.c: Likewise.
* config/obj-som.c: Likewise.
* config/tc-alpha.c: Likewise.
* config/tc-arc.c: Likewise.
* config/tc-arm.c: Likewise.
* config/tc-dlx.c: Likewise.
* config/tc-h8300.c: Likewise.
* config/tc-hppa.c: Likewise.
* config/tc-i370.c: Likewise.
* config/tc-i386-intel.c: Likewise.
* config/tc-i386.c: Likewise.
* config/tc-i960.c: Likewise.
* config/tc-ia64.c: Likewise.
* config/tc-iq2000.c: Likewise.
* config/tc-m32r.c: Likewise.
* config/tc-m68hc11.c: Likewise.
* config/tc-m68k.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mips.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-mn10200.c: Likewise.
* config/tc-mn10300.c: Likewise.
* config/tc-nios2.c: Likewise.
* config/tc-ppc.c: Likewise.
* config/tc-s390.c: Likewise.
* config/tc-score.c: Likewise.
* config/tc-score7.c: Likewise.
* config/tc-sparc.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-tic6x.c: Likewise.
* config/tc-tilegx.c: Likewise.
* config/tc-tilepro.c: Likewise.
* config/tc-v850.c: Likewise.
* config/tc-xtensa.c: Likewise.
* config/tc-z80.c: Likewise.
* dw2gencfi.c: Likewise.
* dwarf2dbgc.: Likewise.
* ecoff.c: Likewise.
* read.c: Likewise.
* stabs.c: Likewise.
tests PR gas/18581
* gas/all/byte.d: Disable this test. Quoted expressions
are now allowed in .byte directives.
* gas/all/quoted-sym-names.s: New test.
* gas/all/quoted-sym-names.d: Expected output.
* gas/all/gas.exp: Run the new test.
|
|
When runtime patching code (like e.g. done by the Linux kernel) there
may be cases where the set of stack frame alterations differs between
unpatched and patched code. Consequently the corresponding unwind data
needs patching too. Locating the right places within an FDE, however,
is rather cumbersome without a way to insert labels in the resulting
section. Hence this patch introduces a new directive, .cfi_label. Note
that with the way CFI data gets emitted currently (at the end of the
assembly process) this can't support local FB- and dollar-labels.
gas/
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/dw2gencfi.c (cfi_add_label, dot_cfi_label): New.
(cfi_pseudo_table): Add "cfi_label".
(output_cfi_insn): Handle CFI_label.
(select_cie_for_fde): Als terminate CIE when encountering
CFI_label.
* dw2gencfi.h (cfi_add_label): Declare.
(struct cfi_insn_data): New member "sym_name".
(CFI_label): New.
* read.c (read_symbol_name): Drop "static".
* read.h (read_symbol_name): Declare.
gas/testsuite/
2015-01-12 Jan Beulich <jbeulich@suse.com>
gas/cfi/cfi-label.d, gas/cfi/cfi-label.s: New.
gas/cfi/cfi.exp: Run new tests.
|
|
|
|
A number of targets pass extra information from TC_PARSE_CONS_EXPRESSION
to TC_CONS_FIX_NEW via static variables. That's OK, but not best
practice. tc-ppc.c goes further in implementing its own replacement
for cons(), because the generic one doesn't allow relocation modifiers
on constants. This patch fixes both of these warts.
* gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
* gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
* gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
(TC_CONS_FIX_NEW): Add RELOC parameter.
* gas/config/tc-arm.c (cons_fix_new_arm): Similarly
* gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
* gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
* gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
* gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
Similarly.
* gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
* gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
* gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
* gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
* gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
* gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
* gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
Similarly.
* gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
* gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
Similarly.
* gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
* gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
* gas/config/tc-avr.c (exp_mod_data): Make global.
(pexp_mod_data): Delete.
(avr_parse_cons_expression): Return exp_mod_data pointer.
(avr_cons_fix_new): Add exp_mod_data_t pointer param.
(exp_mod_data_t): Move typedef..
* gas/config/tc-avr.h: ..to here.
(exp_mod_data): Declare.
(TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
(avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
(TC_CONS_FIX_NEW): Update.
* gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
(cons_fix_new_hppa): Add hppa_field_selector param.
(fix_new_hppa): Adjust.
(parse_cons_expression_hppa): Return field selector.
* gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
(cons_fix_new_hppa): Likewise.
(TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
* gas/config/tc-i386.c (got_reloc): Delete static var.
(x86_cons_fix_new): Add reloc param.
(x86_cons): Return got reloc.
* gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
(TC_CONS_FIX_NEW): Add RELOC param.
* gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param. Adjust
calls.
* gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
(TC_CONS_FIX_NEW): Add reloc param.
* gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
Return reloc.
(cons_fix_new_microblaze): Add reloc param.
* gas/config/tc-microblaze.h: Formatting.
(parse_cons_expression_microblaze): Update proto.
(cons_fix_new_microblaze): Likewise.
* gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
(nios2_cons): Return ldo reloc.
(nios2_cons_fix_new): Delete.
* gas/config/tc-nios2.h (nios2_cons): Update prototype.
(nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
* gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
short. Make llong use cons.
(ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
(ppc_elf_cons): Delete.
(ppc_elf_parse_cons): New function.
(ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
(md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
* gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
(ppc_elf_parse_cons): Declare.
* gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
(sparc_cons): Return reloc specifier.
(cons_fix_new_sparc): Add reloc specifier param.
(sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
* gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
(TC_PARSE_CONS_RETURN_NONE): Define.
(sparc_cons, cons_fix_new_sparc): Update prototype.
* gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
(v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
(md_assemble): Likewise.
(parse_cons_expression_v850): Return reloc.
(cons_fix_new_v850): Add reloc parameter.
* gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
(cons_fix_new_v850): Likewise.
* gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
(vax_cons): Return reloc.
(vax_cons_fix_new): Add reloc parameter.
* gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
* gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
* gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
* gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
(emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
* gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
(do_parse_cons_expression): Adjust.
(cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
to emit_expr_with_reloc.
(emit_expr_with_reloc): New function handling reloc, mostly
extracted from..
(emit_expr): ..here.
(emit_expr_fix): Add reloc param. Adjust TC_CONS_FIX_NEW invocation.
Handle reloc.
(parse_mri_cons): Convert to ISO.
* gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
(TC_PARSE_CONS_RETURN_NONE): Define.
(emit_expr_with_reloc): Declare.
(emit_expr_fix): Update prototype.
* gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
|
|
|
|
* config/obj-elf.h (obj_elf_vendor_attribute): ... here.
* read.c (potable): Remove "gnu_attribute".
(skip_whitespace, skip_past_char, skip_past_comma): Delete, move
to config/obj-elf.c.
(s_vendor_attribute): Delete, move to obj_elf_vendor_attribute
in config/obj-elf.c.
(s_gnu_attribute): Delete, move to obj_elf_gnu_attribute in
config/obj-elf.c.
* config/obj-elf.c (elf_pseudo_table): Add "gnu_attribute".
(skip_whitespace, skip_past_char, skip_past_comma): New, moved
from read.c.
(obj_elf_vendor_attribute): New, moved from s_vendor_attribute
in read.c.
(obj_elf_gnu_attribute): New, moved from s_gnu_attribute in
read.c.
* config/tc-arm.c (s_arm_eabi_attribute): Rename
s_vendor_attribute to obj_elf_vendor_attribute.
* config/tc-tic6x.c (s_tic6x_c6xabi_attribute): Likewise.
|
|
2012-03-12 Roland McGrath <mcgrathr@google.com>
* config/tc-arm.c (arm_frag_max_var): New function.
* config/tc-arm.h: Declare it.
(md_frag_max_var): New macro.
* config/tc-i386.c (i386_frag_max_var): New function.
* config/tc-i386.h: Declare it.
(md_frag_max_var): New macro.
* doc/as.texinfo (Bundle directives): New node.
(Pseudo Ops): Add it to the menu.
* NEWS: Mention new feature.
* read.c [md_frag_max_var] (HANDLE_BUNDLE): New macro.
[HANDLE_BUNDLE] (bundle_align_p2): New variable.
[HANDLE_BUNDLE] (bundle_lock_frchain, bundle_lock_frag): New variables.
[HANDLE_BUNDLE] (start_bundle, pending_bundle_size, finish_bundle):
New functions.
(assemble_one): New function if [HANDLE_BUNDLE], #define directly
to md_assembly if not.
(read_a_source_file): Call assemble_one in place of md_assemble.
(read_a_source_file) [HANDLE_BUNDLE]: Check for unterminated
.bundle_lock at end of processing.
[HANDLE_BUNDLE] (s_bundle_align_mode, s_bundle_lock, s_bundle_unlock):
New functions.
[HANDLE_BUNDLE] (potable): Add their entries.
* read.h: Declare new functions.
gas/testsuite/
2012-03-12 Roland McGrath <mcgrathr@google.com>
* gas/i386/bundle-bad.s: New file.
* gas/i386/bundle-bad.d: New file.
* gas/i386/bundle-bad.l: New file.
* gas/i386/i386.exp: Run it.
* gas/arm/bundle.s: New file.
* gas/arm/bundle.d: New file.
* gas/arm/bundle-lock.s: New file.
* gas/arm/bundle-lock.d: New file.
* gas/i386/bundle.s: New file.
* gas/i386/bundle.d: New file.
* gas/i386/x86-64-bundle.s: New file.
* gas/i386/x86-64-bundle.d: New file.
* gas/i386/bundle-lock.s: New file.
* gas/i386/bundle-lock.d: New file.
* gas/i386/i386.exp: Run them.
|
|
* Makefile.am (ALL_MACHINES): Add cpu-rx.lo.
(ALL_MACHINES_CFILES): Add cpu-rx.c.
(BFD32_BACKENDS): Add elf32-rx.lo.
(BFD32_BACKENDS_CFILES): Add elf32-rx.c.
* archures.c (bfd_architecture): Add bfd_arch_rx and bfd_mach_rx.
Export bfd_rx_arch.
(bfd_archures_list): Add bfd_rx_arch.
* config.bfd: Add entry for rx-*-elf.
* configure.in: Add entries for bfd_elf32_rx_le_vec and
bfd_elf32_rx_be_vec.
* reloc.c: Add RX relocations.
* targets.c: Add RX target vectors.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* cpu-rx.c: New file.
* elf32-rx.c: New file.
binutils
* readelf.c: Add support for RX target.
* MAINTAINERS: Add DJ and NickC as maintainers for RX.
gas
* Makefile.am: Add RX target.
* configure.in: Likewise.
* configure.tgt: Likewise.
* read.c (do_repeat_with_expander): New function.
* read.h: Provide a prototype for do_repeat_with_expander.
* doc/Makefile.am: Add RX target documentation.
* doc/all.texi: Likewise.
* doc/as.texinfo: Likewise.
* Makefile.in: Regenerate.
* NEWS: Mention support for RX architecture.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
* config/rx-defs.h: New file.
* config/rx-parse.y: New file.
* config/tc-rx.h: New file.
* config/tc-rx.c: New file.
* doc/c-rx.texi: New file.
gas/testsuite
* gas/rx: New directory.
* gas/rx/*: New set of test cases.
* gas/elf/section2.e-rx: New expected output file.
* gas/all/gas.exp: Add support for RX target.
* gas/elf/elf.exp: Likewise.
* gas/lns/lns.exp: Likewise.
* gas/macros/macros.exp: Likewise.
include
* dis-asm.h: Add prototype for print_insn_rx.
include/elf
* rx.h: New file.
include/opcode
* rx.h: New file.
ld
* Makefile.am: Add rules to build RX emulation.
* configure.tgt: Likewise.
* NEWS: Mention support for RX architecture.
* Makefile.in: Regenerate.
* emulparams/elf32rx.sh: New file.
* emultempl/rxelf.em: New file.
opcodes
* Makefile.am: Add RX files.
* configure.in: Add support for RX target.
* disassemble.c: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* opc2c.c: New file.
* rx-decode.c: New file.
* rx-decode.opc: New file.
* rx-dis.c: New file.
|
|
|
|
gas/
* config/tc-arm.c (attributes_set_explicitly): New array.
(s_arm_eabi_attribute): Check return value from s_vendor_attribute.
(cpu_arch): Add ARM_ARCH_V5T.
(aeabi_set_attribute_int): New function.
(aeabi_set_attribute_string): New function.
(aeabi_set_public_attributes): Set attributes according to the user's
intentions, rather than the actual state of the binary.
Use aeabi_set_attribute_int and aeabi_set_attribute_string instead of
bfd_elf_add_proc_attr_int and bfd_elf_add_proc_attr_string.
Support WMMXv2. Use attribute names instead of numbers.
* read.c (s_vendor_attribute): Change return type to int.
Return the tag number that was set.
* read.h (s_vendor_attribute): Change return type to int.
gas/testsuite/
* gas/arm/attr-cpu-directive.d: New file.
* gas/arm/attr-cpu-directive.s: New file.
* gas/arm/attr-default.d: New file.
* gas/arm/attr-march-all.d: New file.
* gas/arm/attr-march-armv1.d: New file.
* gas/arm/attr-march-armv2.d: New file.
* gas/arm/attr-march-armv2a.d: New file.
* gas/arm/attr-march-armv2s.d: New file.
* gas/arm/attr-march-armv3.d: New file.
* gas/arm/attr-march-armv3m.d: New file.
* gas/arm/attr-march-armv4.d: New file.
* gas/arm/attr-march-armv4t.d: New file.
* gas/arm/attr-march-armv4txm.d: New file.
* gas/arm/attr-march-armv4xm.d: New file.
* gas/arm/attr-march-armv5.d: New file.
* gas/arm/attr-march-armv5t.d: New file.
* gas/arm/attr-march-armv5te.d: New file.
* gas/arm/attr-march-armv5tej.d: New file.
* gas/arm/attr-march-armv5texp.d: New file.
* gas/arm/attr-march-armv5txm.d: New file.
* gas/arm/attr-march-armv6-m.d: New file.
* gas/arm/attr-march-armv6.d: New file.
* gas/arm/attr-march-armv6j.d: New file.
* gas/arm/attr-march-armv6k.d: New file.
* gas/arm/attr-march-armv6kt2.d: New file.
* gas/arm/attr-march-armv6t2.d: New file.
* gas/arm/attr-march-armv6z.d: New file.
* gas/arm/attr-march-armv6zk.d: New file.
* gas/arm/attr-march-armv6zkt2.d: New file.
* gas/arm/attr-march-armv6zt2.d: New file.
* gas/arm/attr-march-armv7-a.d: New file.
* gas/arm/attr-march-armv7-m.d: New file.
* gas/arm/attr-march-armv7-r.d: New file.
* gas/arm/attr-march-armv7.d: New file.
* gas/arm/attr-march-armv7a.d: New file.
* gas/arm/attr-march-armv7m.d: New file.
* gas/arm/attr-march-armv7r.d: New file.
* gas/arm/attr-march-iwmmxt.d: New file.
* gas/arm/attr-march-iwmmxt2.d: New file.
* gas/arm/attr-march-xscale.d: New file.
* gas/arm/attr-mcpu.d: New file.
* gas/arm/attr-mfpu-arm1020e.d: New file.
* gas/arm/attr-mfpu-arm1020t.d: New file.
* gas/arm/attr-mfpu-arm1136jf-s.d: New file.
* gas/arm/attr-mfpu-arm1136jfs.d: New file.
* gas/arm/attr-mfpu-arm7500fe.d: New file.
* gas/arm/attr-mfpu-fpa.d: New file.
* gas/arm/attr-mfpu-fpa10.d: New file.
* gas/arm/attr-mfpu-fpa11.d: New file.
* gas/arm/attr-mfpu-fpe.d: New file.
* gas/arm/attr-mfpu-fpe2.d: New file.
* gas/arm/attr-mfpu-fpe3.d: New file.
* gas/arm/attr-mfpu-maverick.d: New file.
* gas/arm/attr-mfpu-neon-fp16.d: New file.
* gas/arm/attr-mfpu-neon.d: New file.
* gas/arm/attr-mfpu-softfpa.d: New file.
* gas/arm/attr-mfpu-softvfp+vfp.d: New file.
* gas/arm/attr-mfpu-softvfp.d: New file.
* gas/arm/attr-mfpu-vfp.d: New file.
* gas/arm/attr-mfpu-vfp10-r0.d: New file.
* gas/arm/attr-mfpu-vfp10.d: New file.
* gas/arm/attr-mfpu-vfp3.d: New file.
* gas/arm/attr-mfpu-vfp9.d: New file.
* gas/arm/attr-mfpu-vfpv2.d: New file.
* gas/arm/attr-mfpu-vfpv3-d16.d: New file.
* gas/arm/attr-mfpu-vfpv3.d: New file.
* gas/arm/attr-mfpu-vfpxd.d: New file.
* gas/arm/attr-order.d: Update Tag_ARM_ISA_use and Tag_THUMB_ISA_use.
* gas/arm/attr-override-cpu-directive.d: New file.
* gas/arm/attr-override-cpu-directive.s: New file.
* gas/arm/attr-override-mcpu.d: New file.
* gas/arm/attr-override-mcpu.s: New file.
* gas/arm/blank.s: New file.
* gas/arm/eabi_attr_1.d: Update Tag_ARM_ISA_use and Tag_THUMB_ISA_use.
ld/testsuite/
* ld-arm/attr-merge-3.attr: Update following gas change.
* ld-arm/attr-merge-2.attr: Update Tag_ARM_ISA_use and
Tag_THUMB_ISA_use following gas changes.
* ld-arm/attr-merge-4.attr: Likewise.
* ld-arm/attr-merge-5.attr: Likewise.
* ld-arm/attr-merge-arch-1.attr: Likewise.
* ld-arm/attr-merge-arch-2.attr: Likewise.
* ld-arm/attr-merge-unknown-2.d: Likewise.
* ld-arm/attr-merge-unknown-2r.d: Likewise.
* ld-arm/attr-merge-unknown-3.d: Likewise.
* ld-arm/attr-merge-wchar-00-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-00.d: Likewise.
* ld-arm/attr-merge-wchar-02-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-02.d: Likewise.
* ld-arm/attr-merge-wchar-04-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-04.d: Likewise.
* ld-arm/attr-merge-wchar-20-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-20.d: Likewise.
* ld-arm/attr-merge-wchar-22-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-22.d: Likewise.
* ld-arm/attr-merge-wchar-24-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-40-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-40.d: Likewise.
* ld-arm/attr-merge-wchar-42-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-44-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-44.d: Likewise.
* ld-arm/attr-merge.attr: Likewise.
|
|
* dwarf2dbg.c (out_sleb128): Delete.
(size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
(out_fixed_inc_line_addr): Delete.
(relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
(dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
(process_entries): Remove calls to out_fixed_inc_line_addr. When
DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
* read.h (emit_expr_fix): New prototype.
* read.c (emit_expr): Move code to emit_expr_fix and use it here.
(emit_expr_fix): New.
testsuite/
* gas/lns/lns.exp: Run new lns-big-delta test for targets that set
DWARF2_USE_FIXED_ADVANCE_PC.
* gas/lns/lns-big-delta.s: New.
* gas/lns/lns-big-delta.d: New.
|
|
|
|
* elf-attrs.c: New.
* Makefile.am (BFD32_BACKENDS): Add elf-attrs.lo.
(BFD32_BACKENDS_CFILES): Add elf-attrs.c.
(elf-attrs.lo): Generate dependencies.
* Makefile.in: Regenerate.
* configure.in (elf): Add elf-attrs.lo.
* configure: Regenerate.
* elf-bfd.h (struct elf_backend_data): Add entries for object
attributes.
(NUM_KNOWN_OBJ_ATTRIBUTES, obj_attribute, obj_attribute_list,
OBJ_ATTR_PROC, OBJ_ATTR_GNU, OBJ_ATTR_FIRST, OBJ_ATTR_LAST,
Tag_NULL, Tag_File, Tag_Section, Tag_Symbol, Tag_compatibility):
New.
(struct elf_obj_tdata): Add entries for object attributes.
(elf_known_obj_attributes, elf_other_obj_attributes,
elf_known_obj_attributes_proc, elf_other_obj_attributes_proc):
New.
(bfd_elf_obj_attr_size, bfd_elf_set_obj_attr_contents,
bfd_elf_get_obj_attr_int, bfd_elf_add_obj_attr_int,
bfd_elf_add_proc_attr_int, bfd_elf_add_obj_attr_string,
bfd_elf_add_proc_attr_string, bfd_elf_add_obj_attr_compat,
bfd_elf_add_proc_attr_compat, _bfd_elf_attr_strdup,
_bfd_elf_copy_obj_attributes, _bfd_elf_obj_attrs_arg_type,
_bfd_elf_parse_attributes, _bfd_elf_merge_object_attributes): New.
* elf.c (_bfd_elf_copy_private_bfd_data): Copy object attributes.
(bfd_section_from_shdr): Handle attributes sections.
* elflink.c (bfd_elf_final_link): Handle attributes sections.
* elfxx-target.h (elf_backend_obj_attrs_vendor,
elf_backend_obj_attrs_section, elf_backend_obj_attrs_arg_type,
elf_backend_obj_attrs_section_type): New.
(elfNN_bed): Update.
* elf32-arm.c (NUM_KNOWN_ATTRIBUTES, aeabi_attribute,
aeabi_attribute_list): Remove.
(struct elf32_arm_obj_tdata): Remove object attributes fields.
(check_use_blx, bfd_elf32_arm_set_vfp11_fix, using_thumb2,
elf32_arm_copy_private_bfd_data, elf32_arm_merge_eabi_attributes):
Update for new object attributes interfaces.
(uleb128_size, is_default_attr, eabi_attr_size,
elf32_arm_eabi_attr_size, write_uleb128, write_eabi_attribute,
elf32_arm_set_eabi_attr_contents, elf32_arm_bfd_final_link,
elf32_arm_new_eabi_attr, elf32_arm_get_eabi_attr_int,
elf32_arm_add_eabi_attr_int, attr_strdup,
elf32_arm_add_eabi_attr_string, elf32_arm_add_eabi_attr_compat,
copy_eabi_attributes, elf32_arm_parse_attributes): Remove. Moved
to generic code in elf-attrs.c.
(elf32_arm_obj_attrs_arg_type): New.
(elf32_arm_fake_sections): Do not handle .ARM.attributes.
(elf32_arm_section_from_shdr): Do not handle SHT_ARM_ATTRIBUTES.
(bfd_elf32_bfd_final_link): Remove.
(elf_backend_obj_attrs_vendor, elf_backend_obj_attrs_section,
elf_backend_obj_attrs_arg_type,
elf_backend_obj_attrs_section_type): New.
* elf32-bfin.c (bfin_elf_copy_private_bfd_data): Copy object
attributes.
* elf32-frv.c (frv_elf_copy_private_bfd_data): Likewise.
* elf32-iq2000.c (iq2000_elf_copy_private_bfd_data): Likewise.
* elf32-mep.c (mep_elf_copy_private_bfd_data): Likewise.
* elf32-mt.c (mt_elf_copy_private_bfd_data): Likewise.
* elf32-sh.c (sh_elf_copy_private_data): Likewise.
* elf64-sh64.c (sh_elf64_copy_private_data_internal): Likewise.
binutils:
* readelf.c (display_gnu_attribute): New.
(process_arm_specific): Rearrange as process_attributes.
(process_arm_specific): Replace by wrapper of process_attributes.
gas:
* as.c (create_obj_attrs_section): New.
(main): Call create_obj_attrs_section for ELF.
* read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
skip_past_comma, s_vendor_attribute): New.
(potable): Add gnu_attribute for ELF.
* read.h (s_vendor_attribute): Declare.
* config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
round s_vendor_attribute.
(aeabi_set_public_attributes): Update for new attributes
interfaces.
(arm_md_end): Remove attributes contents setting now done
generically.
include/elf:
* arm.h (elf32_arm_add_eabi_attr_int,
elf32_arm_add_eabi_attr_string, elf32_arm_add_eabi_attr_compat,
elf32_arm_get_eabi_attr_int, elf32_arm_set_eabi_attr_contents,
elf32_arm_eabi_attr_size, Tag_NULL, Tag_File, Tag_Section,
Tag_Symbol, Tag_compatibility): Remove.
* common.h (SHT_GNU_ATTRIBUTES): Define.
ld:
* emulparams/armelf.sh (OTHER_SECTIONS): Remove .ARM.attributes.
(ATTRS_SECTIONS): Define.
* scripttempl/elf.sc, scripttempl/elf32sh-symbian.sc,
scripttempl/elf_chaos.sc, scripttempl/elfi370.sc,
scripttempl/elfxtensa.sc: Handle ATTRS_SECTIONS.
|
|
* read.c (potable): Add weakref.
(s_weakref): New.
* read.h (s_weakref): Declare.
* struc-symbol.h (struct symbol): Add sy_weakrefr and sy_weakrefd.
* symbols.c (colon): Clear weakrefr.
(symbol_find_exact): Rename to, and reimplement in terms of...
(symbol_find_exact_noref): ... new function.
(symbol_find): Likewise...
(symbol_find_noref): ... ditto.
(resolve_symbol_value): Resolve weakrefr without setting their
values.
(S_SET_WEAK): Call hook.
(S_GET_VALUE): Follow weakref link.
(S_SET_VALUE): Clear weakrefr.
(S_IS_WEAK): Follow weakref link.
(S_IS_WEAKREFR, S_SET_WEAKREFR, S_CLEAR_WEAKREFR): New.
(S_IS_WEAKREFD, S_SET_WEAKREFD, S_CLEAR_WEAKREFD): New.
(symbol_set_value_expression, symbol_set_frag): Clear weakrefr.
(symbol_mark_used): Follow weakref link.
(print_symbol_value_1): Print weak, weakrefr and weakrefd.
* symbols.h (symbol_find_noref, symbol_find_exact_noref): Declare.
(S_IS_WEAKREFR, S_SET_WEAKREFR, S_CLEAR_WEAKREFR): Declare.
(S_IS_WEAKREFD, S_SET_WEAKREFD, S_CLEAR_WEAKREFD): Declare.
* write.c (adust_reloc_syms): Follow weakref link. Do not
complain if target is undefined.
(write_object_file): Likewise. Remove weakrefr symbols. Drop
unreferenced weakrefd symbols.
* config/obj-coff.c (obj_frob_symbol): Do not force WEAKREFD
symbols EXTERNAL.
(pecoff_obj_set_weak_hook, pecoff_obj_clear_weak_hook): New.
* config/obj-coff.h (obj_set_weak_hook, obj_clear_weak_hook): Define.
* doc/as.texinfo: Document weakref.
* doc/internals.texi: Document new struct members, internal
functions and hooks.
gas/testsuite/ChangeLog:
* gas/all/weakref1.s, gas/all/weakref1.d: New test.
* gas/all/weakref1g.d, gas/all/weakref1l.d: New tests.
* gas/all/weakref1u.d, gas/all/weakref1w.d: New tests.
* gas/all/weakref2.s, gas/all/weakref3.s: New tests.
* gas/all/gas.exp: Run new tests.
|
|
2005-05-17 Jan Beulich <jbeulich@novell.com>
* read.c (_find_end_of_line): New.
(find_end_of_line): New.
(HANDLE_CONDITIONAL_ASSEMBLY): Use it.
(read_a_source_file): Use it.
(s_globl): Use it.
(s_macro): Use it.
(get_line_sb): Use it.
(s_errwarn): Replace discard_rest_of_line by ignore_rest_of_line.
(s_comm_internal): Likewise.
(s_lsym): Likewise.
(s_macro): Likewise.
(s_ignore): Use ignore_rest_of_line.
* read.h (find_end_of_line): Prototype.
(discard_rest_of_line): Remove prototype. #define to
ignore_rest_of_line.
gas/testsuite/
2005-05-17 Jan Beulich <jbeulich@novell.com>
* gas/mmix/err-byte1.s: Adjust expected error text on line 10.
|
|
2005-05-06 Jan Beulich <jbeulich@novell.com>
* cond.c (s_ifb): New.
* read.c (potable): Add s_ifb as handler for .ifb and .ifnb.
* read.h (s_ifb): Prototype.
* doc/as.texinfo: Document .ifb and .ifnb.
gas/testsuite/
2005-05-06 Jan Beulich <jbeulich@novell.com>
* gas/all/cond.s: Also test .ifb/.ifnb.
* gas/all/cond.d: Adjust.
|
|
|
|
(GENERIC_OBJS): Likewise, remove bignum-copy.o.
(bignum-copy.o): Remove.
* Makefile.in: Regenerate.
* makefile.vms (OBJS): Remove bignum-copy.obj.
* symbols.h (local_symbol_make): Remove declaration.
(verify_symbol_chain_2): Likewise.
* symbols.c (local_symbol_make): Make static.
(max_indent_level): Likewise.
(verify_symbol_chain_2): Remove.
* macro.c (macro_hash): Make static.
* messages.c (fprint_value): Remove.
* read.h (get_absolute_expr): Remove.
(emit_leb128_expr): Likewise.
(do_s_func): Likewise.
* read.c (do_s_func): Make static.
(emit_leb128_expr): Likewise.
(get_absolute_expr): Likewise.
* as.h (as_howmuch): Remove declaration.
(fprint_value): Likewise.
* as.c (myname): Make static.
* input-scrub.c (as_howmuch): Remove.
(as_1_char): Likewise.
* input-file.h (input_file_is_open): Remove.
* input-file.c (input_file_is_open): Likewise.
* expr.h (expr_build_unary): Remove declaration.
(expr_build_binary): Likewise.
* expr.c (expr_build_unary): Remove.
(expr_build_binary): Likewise.
* hash.h (hash_replace): Remove declaration.
(hash_delete): Likewise.
* hash.c (hash_replace): Remove.
(hash_delete): Likewise.
* bignum-copy.c (bignum_copy): Move from here ..
* config/tc-vax.c (bignum_copy): .. to here.
* bignum.h (LOG_TO_BASE_2_OF_10): Remove.
(bignum_copy): Remove extern declaration.
* sb.h (string_count): Remove extern declaration.
(sb_build, sb_add_buffer, sb_print, sb_print_at): Likewise.
(sb_name): Likewise.
* sb.c (dsize): Replace preprocessor macro with static int.
(string_count): Make static.
(sb_build, sb_add_buffer, sb_print, sb_print_at): Likewise.
(sb_name): Likewise.
* config/obj-coff.c (dim_index): Make static.
* config/tc-i386.c (GOT_symbol): Likewise.
(output_invalid_buf): Likewise.
* doc/internals.texi (Warning and error messages): Remove the
prototype for fprint_value.
|
|
|