aboutsummaryrefslogtreecommitdiff
path: root/gas/doc
AgeCommit message (Collapse)AuthorFilesLines
2019-05-23gas: add support for eBPFJose E. Marchesi5-0/+402
This patch adds a port for the Linux kernel eBPF to the GNU assembler. A testsuite and documentation updates are included. gas/ChangeLog: 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> * configure.ac: Handle bpf-*-* targets. * configure.tgt (generic_target): Likewise. * configure: Regenerate. * Makefile.am (TARGET_CPU_CFILES): Add tc-bpf.c. (TARGET_CPU_HFILES): Add tc-bpf.h. * Makefile.in: Regenerated. * config/tc-bpf.c: New file. * config/tc-bpf.h: Likewise. * doc/Makefile.am (CPU_DOCS): Add c-bpf.texi. * doc/Makefile.in: Regenerated. * doc/all.texi: set BPF. * doc/as.texi: Add eBPF contents. * doc/c-bpf.texi: New file. * testsuite/gas/bpf/alu.d: New file. * testsuite/gas/bpf/mem-be.d: Likewise. * testsuite/gas/bpf/mem.s: Likewise. * testsuite/gas/bpf/mem.d: Likewise. * testsuite/gas/bpf/lddw-be.d: Likewise. * testsuite/gas/bpf/lddw.s: Likewise. * testsuite/gas/bpf/lddw.d: Likewise. * testsuite/gas/bpf/jump-be.d: Likewise. * testsuite/gas/bpf/jump.s: Likewise. * testsuite/gas/bpf/jump.d: Likewise. * testsuite/gas/bpf/exit-be.d: Likewise. * testsuite/gas/bpf/exit.s: Likewise. * testsuite/gas/bpf/exit.d: Likewise. * testsuite/gas/bpf/call-be.d: Likewise. * testsuite/gas/bpf/call.s: Likewise. * testsuite/gas/bpf/call.d: Likewise. * testsuite/gas/bpf/bpf.exp: Likewise. * testsuite/gas/bpf/atomic-be.d: Likewise. * testsuite/gas/bpf/atomic.s: Likewise. * testsuite/gas/bpf/atomic.d: Likewise. * testsuite/gas/bpf/alu-be.d: Likewise. * testsuite/gas/bpf/alu32-be.d: Likewise. * testsuite/gas/bpf/alu32.s: Likewise. * testsuite/gas/bpf/alu32.d: Likewise. * testsuite/gas/bpf/alu.s: Likewise. * testsuite/gas/all/gas.exp: Introduce a nop_type for eBPF. * testsuite/gas/all/org-1.s: Support nop_type 6. * testsuite/gas/all/org-1.l: Updated to reflect changes in org-1.s.
2019-05-22S12Z: GAS: New option --mdollar-hex.John Darrington1-0/+13
This option (also implied by --traditional) causes '$' to introduce literal hexadecimal constants, rather than the modern convention '0x'. gas/ * config/tc-s12z.c (s12z_strtol): New function. (md_show_usage): Update. (md_parse_option): new case OPTION_DOLLAR_HEX. (s12z_init_after_args): (<global>): Use s12z_strtol instead of strtol. * doc/c-s12z.texi (S12Z Options): Document new option -mdollar-hex. * testsuite/gas/s12z/dollar-hex.d: New file. * testsuite/gas/s12z/dollar-hex.s: New file. * testsuite/gas/s12z/s12z.exp: Add them.
2019-05-18S12Z (doc): Minor improvements to text and formatting.John Darrington1-53/+47
gas/ * doc/c-s12z.texi: Miscellaneous adjustments.
2019-05-17GAS (documentation): Remove trademark acknowledgements.John Darrington2-2/+2
GNU policy is not to include trademark acknowlegements in documentation [1] [1] https://www.gnu.org/prep/standards/html_node/Trademarks.html Committing as obvious. gas/ * doc/c-arm.texi (ARM Options): Remove "(r)" and "(tm)" * doc/c-bfin.texi (Blackfin Syntax): Remove "(r)"
2019-05-16[PATCH 1/57][Arm][GAS]: Add support for +mve and +mve.fpAndre Vieira1-1/+6
bfd/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add case for Tag_MVE_arch. binutils/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values. (arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch. elfcpp/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * arm.h (Tag_MVE_arch): Define new enum value. gas/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (mve_ext, mve_fp_ext): New features. (armv8_1m_main_ext_table): Add new extensions. (aeabi_set_public_attributes): Translate new features to new build attributes. (arm_convert_symbolic_attribute): Add Tag_MVE_arch. * doc/c-arm.texi: Document new extensions and new build attribute. include/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * elf/arm.h (Tag_MVE_arch): Define new enum value. * opcode/arm.h (FPU_MVE, FPU_MVE_FP): New MACROs for new features.
2019-05-15S12Z: New option -mreg-prefixJohn Darrington1-9/+77
Add a new machine dependent option to set a prefix for register names. gas/ * config/tc-s12z.c (register_prefix): New variable. (md_show_usage, md_parse_option): parse the new option. (lex_reg_name): Scan the prefix if one is set. * doc/c-s12z.texi (S12Z-Opts): Document the new option. * testsuite/gas/s12z/reg-prefix.d: New file. * testsuite/gas/s12z/reg-prefix.s: New file. * testsuite/gas/s12z/s12z.exp: Add them.
2019-05-15GAS (doc): Fix misaligned menu entry.John Darrington1-1/+1
gas/ * doc/as.texi (Machine Dependencies): Fix misaligned menu entry.
2019-05-09[binutils][aarch64] SVE2 feature extension flags.Matthew Malcomson1-0/+10
Include all feature flag macros. The "sve2" extension that enables the core sve2 instructions. This also enables the sve extension, since sve is a requirement of sve2. Extra optional sve2 features are the bitperm, sm4, aes, and sha3 extensions. These are all given extra feature flags, "bitperm", "sve2-sm4", "sve2-aes", and "sve2-sha3" respectively. The sm4, aes, and sha3 extensions are explicitly marked as sve2 extensions to distinguish them from the corresponding NEON extensions. Rather than continue extending the current feature flag numbers, I used some bits that have been skipped. gas/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * config/tc-aarch64.c: Add command line architecture feature flags "sve2", "sve2-sm4", "sve2-aes", "sve2-sha3", "bitperm". * doc/c-aarch64.texi: Document new architecture feature flags. include/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SVE2 AARCH64_FEATURE_SVE2_AES, AARCH64_FEATURE_SVE2_BITPERM, AARCH64_FEATURE_SVE2_SM4, AARCH64_FEATURE_SVE2_SHA3): New feature macros. opcodes/ChangeLog: 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> * aarch64-tbl.h (aarch64_feature_sve2, aarch64_feature_sve2aes, aarch64_feature_sve2sha3, aarch64_feature_sve2sm4, aarch64_feature_sve2bitperm): New feature sets. (SVE2, SVE2_AES, SVE2_SHA3, SVE2_SM4, SVE2_BITPERM): New macros for feature set addresses. (SVE2_INSN, SVE2_INSNC, SVE2AES_INSN, SVE2SHA3_INSN, SVE2SM4_INSN, SVE2SM4_INSNC, SVE2BITPERM_INSN): New macros.
2019-05-01[BINUTILS, AArch64] Enable Transactional Memory ExtensionSudakshina Das1-0/+2
This patch enables the new Transactional Memory Extension added recently as part of Arm's new architecture technologies. We introduce a new optional extension "tme" to enable this. The following instructions are part of the extension: * tstart <Xt> * ttest <Xt> * tcommit * tcancel #<imm> The ISA for the above can be found here: https://developer.arm.com/docs/ddi0602/latest/base-instructions-alphabetic-order *** gas/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add case for AARCH64_OPND_TME_UIMM16. (aarch64_features): Add "tme". * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/tme-invalid.d: New test. * testsuite/gas/aarch64/tme-invalid.l: New test. * testsuite/gas/aarch64/tme-invalid.s: New test. * testsuite/gas/aarch64/tme.d: New test. * testsuite/gas/aarch64/tme.s: New test. *** include/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_TME): New. (enum aarch64_opnd): Add AARCH64_OPND_TME_UIMM16. *** opcodes/ChangeLog *** 2019-05-01 Sudakshina Das <sudi.das@arm.com> * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * aarch64-opc.c (operand_general_constraint_met_p): Add case for AARCH64_OPND_TME_UIMM16. (aarch64_print_operand): Likewise. * aarch64-tbl.h (QL_IMM_NIL): New. (TME): New. (_TME_INSN): New. (struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel.
2019-04-15[GAS, ARM, 2/16] Add CLI extension support for Armv8.1-M MainlineAndre Vieira1-0/+11
This patch implements the dsp, fp and fp.dp extensions for Armv8.1-M Mainline. This patch also removes the fp-armv8 check from the half-precision move instructions 'do_neon_movhf', as checking that the FP16 instructions extension feature bit is enabled 'ARM_EXT2_FP16_INST' is enough. gas/ChangeLog: 2019-04-15 Andre Vieira <andre.simoesdiasvieira@arm.com> * config/tc-arm.c (do_neon_movhf): Remove fp-armv8 check. (armv8_1m_main_ext_table): New extension table. (arm_archs): Use the new extension table. * doc/c-arm.texi: Add missing arch and document new extensions. * testsuite/gas/arm/armv8.1-m.main-fp.d: New. * testsuite/gas/arm/armv8.1-m.main-fp-dp.d: New. * testsuite/gas/arm/armv8.1-m.main-hp.d: New.
2019-04-13[MIPS] Add i6500 CPU and fix i6400 default ASEsMatthew Fortune1-0/+1
gas/ * config/tc-mips.c (mips_cpu_info_table): Add i6500. Update default ASEs for i6400. * doc/c-mips.texi (-march): Document i6500. * testsuite/gas/mips/elf_mach_i6400.d: New test. * testsuite/gas/mips/elf_mach_i6500.d: New test. * testsuite/gas/mips/mips.exp: Run the new tests.
2019-04-05x86: Support Intel AVX512 BF16Xuepeng Guo1-1/+3
Add assembler and disassembler support Intel AVX512 BF16: https://software.intel.com/en-us/download/intel-architecture-instruction-set-extensions-programming-reference gas/ 2019-04-05 Xuepeng Guo <xuepeng.guo@intel.com> * config/tc-i386.c (cpu_arch): Add .avx512_bf16. (cpu_noarch): Add noavx512_bf16. * doc/c-i386.texi: Document avx512_bf16. * testsuite/gas/i386/avx512_bf16.d: New file. * testsuite/gas/i386/avx512_bf16.s: Likewise. * testsuite/gas/i386/avx512_bf16_vl-inval.l: Likewise. * testsuite/gas/i386/avx512_bf16_vl-inval.s: Likewise. * testsuite/gas/i386/avx512_bf16_vl.d: Likewise. * testsuite/gas/i386/avx512_bf16_vl.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16.d: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.l: Likesie. * testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.s: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl.d: Likewise. * testsuite/gas/i386/x86-64-avx512_bf16_vl.s: Likewise. * testsuite/gas/i386/i386.exp: Add BF16 related tests. opcodes/ 2019-04-05 Xuepeng Guo <xuepeng.guo@intel.com> * i386-dis-evex.h (evex_table): Updated to support BF16 instructions. * i386-dis.c (enum): Add EVEX_W_0F3852_P_1, EVEX_W_0F3872_P_1 and EVEX_W_0F3872_P_3. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_BF16_FLAGS. (cpu_flags): Add bitfield for CpuAVX512_BF16. * i386-opc.h (enum): Add CpuAVX512_BF16. (i386_cpu_flags): Add bitfield for cpuavx512_bf16. * i386-opc.tbl: Add AVX512 BF16 instructions. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2019-04-01[GAS, Arm] CLI with architecture sensitive extensionsAndre Vieira1-3/+164
This patch adds a new framework to add architecture sensitive extensions, like GCC does. This patch also implements all architecture extensions currently available in GCC. This framework works as follows. To enable architecture sensitive extensions for a particular architecture, that architecture must contain an ARM_ARCH_OPT2 entry in the 'arm_archs' table. All fields here are the same as previous, with the addition of a new extra field at the end to <name> it's extension table. This <name>, corresponds to a <name>_ext_table of type 'struct arm_ext_table'. This struct can be filled with three types of entries: ARM_ADD (string <ext>, arm_feature_set <enable_bits>), which means +<ext> will enable <enable_bits> ARM_REMOVE (string <ext>, arm_feature_set <disable_bits>), which means +no<ext> will disable <disable_bits> ARM_EXT (string <ext>, arm_feature_set <enable_bits>, arm_feature_set <disable_bits>), which means +<ext> will enable <enable_bits> and +no<ext> will disable <disable_bits> (this is to be used instead of adding an ARM_ADD and ARM_REMOVE for the same <ext>) This patch does not disable the use of the old extensions, even if some of them are duplicated in the new tables. This is a "in-between-step" as we may want to deprecate the old table of extensions in later patches. For now, GAS will first look for the +<ext> or +no<ext> in the new table and if no entry is found it will continue searching in the old table, following old behaviour. If only an ARM_ADD or an ARM_REMOVE is defined for <ext> and +no<ext> or +<ext> resp. is used then it also continues to search the old table for it. A couple of caveats: - This patch does not enable the use of these architecture extensions with the '.arch_extension' directive. This is future work that I will tend to later. - This patch does not enable the use of these architecture extensions with the -mcpu option. This is future work that I will tend to later. - This patch does not change the current behaviour when combining an architecture extension and using -mfpu on the command-line. The current behaviour of GAS is to stage the union of feature bits enabled by both -march and -mfpu. GCC behaves differently here, so this is something we may want to revisit on a later date.
2019-03-18x86: Optimize EVEX vector load/store instructionsH.J. Lu1-1/+3
When there is no write mask, we can encode lower 16 128-bit/256-bit EVEX vector register load and store instructions as VEX vector register load and store instructions with -O1. gas/ PR gas/24348 * config/tc-i386.c (optimize_encoding): Encode 128-bit and 256-bit EVEX vector register load/store instructions as VEX vector register load/store instructions for -O1. * doc/c-i386.texi: Update -O1 documentation. * testsuite/gas/i386/i386.exp: Run PR gas/24348 tests. * testsuite/gas/i386/optimize-1.s: Add tests for EVEX vector load/store instructions. * testsuite/gas/i386/optimize-2.s: Likewise. * testsuite/gas/i386/optimize-3.s: Likewise. * testsuite/gas/i386/optimize-5.s: Likewise. * testsuite/gas/i386/x86-64-optimize-2.s: Likewise. * testsuite/gas/i386/x86-64-optimize-3.s: Likewise. * testsuite/gas/i386/x86-64-optimize-4.s: Likewise. * testsuite/gas/i386/x86-64-optimize-5.s: Likewise. * testsuite/gas/i386/x86-64-optimize-6.s: Likewise. * testsuite/gas/i386/optimize-1.d: Updated. * testsuite/gas/i386/optimize-2.d: Likewise. * testsuite/gas/i386/optimize-3.d: Likewise. * testsuite/gas/i386/optimize-4.d: Likewise. * testsuite/gas/i386/optimize-5.d: Likewise. * testsuite/gas/i386/x86-64-optimize-2.d: Likewise. * testsuite/gas/i386/x86-64-optimize-3.d: Likewise. * testsuite/gas/i386/x86-64-optimize-4.d: Likewise. * testsuite/gas/i386/x86-64-optimize-5.d: Likewise. * testsuite/gas/i386/x86-64-optimize-6.d: Likewise. * testsuite/gas/i386/optimize-7.d: New file. * testsuite/gas/i386/optimize-7.s: Likewise. * testsuite/gas/i386/x86-64-optimize-8.d: Likewise. * testsuite/gas/i386/x86-64-optimize-8.s: Likewise. opcodes/ PR gas/24348 * i386-opc.tbl: Add Optimize to vmovdqa32, vmovdqa64, vmovdqu8, vmovdqu16, vmovdqu32 and vmovdqu64. * i386-tbl.h: Regenerated.
2019-03-18x86: Encode 256-bit/512-bit VEX/EVEX insns with 128-bit VEXH.J. Lu1-4/+6
Since all AVX512 processors support AVX, we can encode 256-bit/512-bit VEX/EVEX vector register clearing instructions with 128-bit VEX vector register clearing instructions at -O1. * config/tc-i386.c (optimize_encoding): Encode 256-bit/512-bit VEX/EVEX vector register clearing instructions with 128-bit VEX vector register clearing instructions at -O1. * doc/c-i386.texi: Update -O1 and -O2 documentation. * testsuite/gas/i386/i386.exp: Run optimize-1a and x86-64-optimize-2a. * testsuite/gas/i386/optimize-1a.d: New file. * testsuite/gas/i386/x86-64-optimize-2a.d: Likewise.
2019-02-22[arm][gas] Add support for Neoverse N1Kyrylo Tkachov1-0/+1
This adds support for the Neoverse N1 CPU [1] to gas. This was previously enabled under the Ares codename, which remains as a valid option for -mcpu for compatibility reasons. make check-gas passes on arm-none-eabi. [1] https://community.arm.com/processors/b/blog/posts/arm-neoverse-n1-platform-accelerating-the-transformation-to-a-scalable-cloud-to-edge-infrastructure 2019-02-21 Kyrylo Tkachov <kyrylo.tkachov@arm.com> * config/tc-arm.c (arm_cpus): Add neoverse-n1. * doc/c-arm.texi (-mcpu): Document neoverse-n1 value.
2019-02-22[AArch64][gas] Add support for Neoverse E1Kyrylo Tkachov1-0/+1
This adds support for the Neoverse E1 CPU [1] to gas. make check-gas passes on aarch64-none-elf. [1] https://community.arm.com/processors/b/blog/posts/arm-neoverse-e1-platform-empowering-the-infrastructure-to-meet-next-generation-throughput-demands 2019-02-21 Kyrylo Tkachov <kyrylo.tkachov@arm.com> * config/tc-aarch64.c (aarch64_cpus): Add neoverse-e1. * doc/c-aarch64.texi (-mcpu): Document neoverse-e1 value.
2019-02-22[AArch64][gas] Add support for Neoverse N1Kyrylo Tkachov1-0/+1
This adds support for the Neoverse N1 [1] CPU to gas. This was previously enabled under the Ares codename, which remains as a valid option for -mcpu for compatibility reasons. make check-gas passes on aarch64-none-elf. [1] https://community.arm.com/processors/b/blog/posts/arm-neoverse-n1-platform-accelerating-the-transformation-to-a-scalable-cloud-to-edge-infrastructure 2019-02-21 Kyrylo Tkachov <kyrylo.tkachov@arm.com> * config/tc-aarch64.c (aarch64_cpus): Add neoverse-n1. * doc/c-aarch64.texi (-mcpu): Document neoverse-n1 value.
2019-02-19Fix a potential deadlock in some older Loongson 3A1000 MIPS processors.Paul Hua1-0/+7
* NEWS: Mention -m[no-]fix-loongson3-llsc. * configure.ac: Add --enable-mips-fix-loongson3-llsc. Define DEFAULT_MIPS_FIX_LOONGSON3_LLSC. * config.in: Regenerated. * configure: Likewise. * config/tc-mips.c (sync_insn, mips_fix_loongson3_llsc): New variables. (options): New OPTION_FIX_LOONGSON3_LLSC, OPTION_NO_FIX_LOONGSON3_LLSC. (md_longopts): Add -m[no-]fix-loongson3-llsc. (md_begin): Initialize sync insn. (fix_loongson3_llsc): New. (append_insn): Call fix_loongson3_llsc. (md_parse_option): Handle OPTION_FIX_LOONGSON3_LLSC, OPTION_NO_FIX_LOONGSON3_LLSC. (md_show_usage): Display -m[no-]fix-loongson3-llsc. * doc/c-mips.texi: Document -m[no-]fix-loongson3-llsc, --enable-mips-fix-loongson3-llsc=[yes|no].
2019-02-10gas: Pass max_bytes to TC_FRAG_INITH.J. Lu1-3/+4
ommit 3ae729d5a4f63740ed9a778960b17c2912b0bbdd Author: H.J. Lu <hjl.tools@gmail.com> Date: Wed Mar 7 04:18:45 2018 -0800 x86: Rewrite NOP generation for fill and alignment increased MAX_MEM_FOR_RS_ALIGN_CODE to 4095 which resulted in increase of assembler time and memory usage by 5 times for inputs with many .p2align directives, which is typical for LTO output. This patch passes max_bytes to TC_FRAG_INIT so that MAX_MEM_FOR_RS_ALIGN_CODE can be set as needed and tracked by backend it so that HANDLE_ALIGN can check the maximum alignment for each rs_align_code frag. Wall time to assemble the same cc1plus.s: before: 423.78user 0.89system 7:05.71elapsed 99%CPU after: 102.35user 0.27system 1:42.89elapsed 99%CPU PR gas/24165 * frags.c (frag_var_init): Pass max_chars to TC_FRAG_INIT as max_bytes. * config/tc-aarch64.h (TC_FRAG_INIT): Add and pass max_bytes to aarch64_init_frag. * /config/tc-arm.h (TC_FRAG_INIT): And and pass max_bytes to arm_init_frag. * config/tc-avr.h (TC_FRAG_INIT): And and ignore max_bytes. * config/tc-ia64.h (TC_FRAG_INIT): Likewise. * config/tc-mmix.h (TC_FRAG_INIT): Likewise. * config/tc-nds32.h (TC_FRAG_INIT): Likewise. * config/tc-ns32k.h (TC_FRAG_INIT): Likewise. * config/tc-rl78.h (TC_FRAG_INIT): Likewise. * config/tc-rx.h (TC_FRAG_INIT): Likewise. * config/tc-score.h (TC_FRAG_INIT): Likewise. * config/tc-tic54x.h (TC_FRAG_INIT): Likewise. * config/tc-tic6x.h (TC_FRAG_INIT): Likewise. * config/tc-xtensa.h (TC_FRAG_INIT): Likewise. * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Set to (alignment ? ((1 << alignment) - 1) : 1) (i386_tc_frag_data): Add max_bytes. (TC_FRAG_INIT): Add and track max_bytes. (HANDLE_ALIGN): Replace MAX_MEM_FOR_RS_ALIGN_CODE with fragP->tc_frag_data.max_bytes. * doc/internals.texi: Update TC_FRAG_TYPE with max_bytes.
2019-01-31S/390: Implement instruction set extensionsAndreas Krebbel1-3/+5
opcodes/ChangeLog: 2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com> * s390-mkopc.c (main): Accept arch13 as cpu string. * s390-opc.c: Add new instruction formats and instruction opcode masks. * s390-opc.txt: Add new arch13 instructions. include/ChangeLog: 2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com> * opcode/s390.h (enum s390_opcode_cpu_val): Add S390_OPCODE_ARCH13. gas/ChangeLog: 2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com> * config/tc-s390.c (s390_parse_cpu): New entry for arch13. * doc/c-s390.texi: Document arch13 march option. * testsuite/gas/s390/s390.exp: Run the arch13 related tests. * testsuite/gas/s390/zarch-arch13.d: New test. * testsuite/gas/s390/zarch-arch13.s: New test. * testsuite/gas/s390/zarch-z13.d: Expect the renamed mnemonics also for z13.
2019-01-16RISC-V: Support ELF attribute for gas and readelf.Jim Wilson1-0/+53
2019-01-16 Kito Cheng <kito@andestech.com> Nelson Chu <nelson@andestech.com> bfd/ * elfnn-riscv.c (riscv_elf_obj_attrs_arg_type): New. (elf_backend_obj_attrs_vendor): Define. (elf_backend_obj_attrs_section_type): Likewise. (elf_backend_obj_attrs_section): Likewise. (elf_backend_obj_attrs_arg_type): Define as riscv_elf_obj_attrs_arg_type. * elfxx-riscv.c (riscv_estimate_digit): New. (riscv_estimate_arch_strlen1): Likewise. (riscv_estimate_arch_strlen): Likewise. (riscv_arch_str1): Likewise. (riscv_arch_str): Likewise. * elfxx-riscv.h (riscv_arch_str): Declare. binutils/ * readelf.c (get_riscv_section_type_name): New function. (get_section_type_name): Add handler for RISC-V. (riscv_attr_tag_t): Declare. (riscv_attr_tag): New. (display_riscv_attribute): New function. (process_attributes): Add handler for RISC-V. * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute section. gas/ * config/tc-riscv.c (DEFAULT_RISCV_ATTR): Define to 0 if not defined. (riscv_set_options): Add `arch_attr` field. (riscv_opts): Set default value for arch_attr. (riscv_write_out_arch_attr): New. (riscv_set_public_attributes): Likewise. (riscv_md_end): Likewise. (riscv_convert_symbolic_attribute): Likewise. (s_riscv_attribute): Likewise. (explicit_arch_attr): Likewise. (riscv_pseudo_table): Add .attribute to the table. (options): Add OPTION_ARCH_ATTR and OPTION_NO_ARCH_ATTR enumeration constants. (md_longopts): Add `march-attr' and `mno-arch-attr' options. (md_parse_option): Handle the new options. (md_show_usage): Document the `march-attr' option. * config/tc-riscv.h (md_end): Define as riscv_md_end (riscv_md_end): Declare. (CONVERT_SYMBOLIC_ATTRIBUTE): Define as riscv_convert_symbolic_attribute. (riscv_convert_symbolic_attribute): Declare. (start_assemble): Declare. * testsuite/gas/elf/elf.exp: Adjust test case for section2.e. * testsuite/gas/elf/section2.e-riscv: New. * testsuite/gas/riscv/attribute-01.d: New test * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-04.s: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-06.s: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-07.s: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-08.s: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-unknown.s: Likewise. * testsuite/gas/riscv/empty.l: Likewise. * doc/c-riscv.texi (.attribute): Add documentation. * configure.ac (--enable-default-riscv-attribute): New options. * configure: Re-generate. * config.in: Re-generate. include/ * elf/riscv.h (SHT_RISCV_ATTRIBUTES): Define. (Tag_RISCV_arch): Likewise. (Tag_RISCV_priv_spec): Likewise. (Tag_RISCV_priv_spec_minor): Likewise. (Tag_RISCV_priv_spec_revision): Likewise. (Tag_RISCV_unaligned_access): Likewise. (Tag_RISCV_stack_align): Likewise.
2019-01-08[AArch64][gas] Add -mcpu support for Arm AresKyrylo Tkachov1-0/+1
This adds support for the Arm Ares CPU for AArch64. It implements the Armv8.2-A architecture with the optional features of statistical profiling, dot product and FP16 on by default. Note: Ares is a codename to enable early adopters and in time we will add the final product name once it's announced. * config/tc-aarch64.c (aarch64_cpus): Add ares. * doc/c-aarch64.texi (-mcpu): Document ares value.
2019-01-07[arm][gas] Add -mcpu support for Arm AresKyrylo Tkachov1-0/+1
This adds support for the Arm Ares CPU in the arm port. It implements the Armv8.2-A architecture with the relevant optional features of dot product and FP16 on by default. Note: Ares is a codename to enable early adopters and in time we will add the final product name once it's announced. * config/tc-arm.c (arm_cpus): Add ares. * doc/c-arm.texi (-mcpu): Document ares value.
2019-01-05RX: gas - Add RXv3 instruction support.Yoshinori Sato1-4/+4
Instruction manual. https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01us0316ej0100-rxv3sm.pdf * config/rx-defs.h (rx_cpu_types): Add type RXV3 and RXV3FPU. (rx_bfield): Add prototype. (rx_post): Likewise. * config/rx-parse.y: Add v3 instructions and Double FPU registers. (DSIZE): Define. (POST): Define. (rx_check_v3): New. check v3 type. (rx_check_dfpu): New. check have double support. (double_condition_table): New. dcmp<cond> contiditon. (check_condition): Multiple condition support. (rx_lex): RXv3 instructions support. Add parse dcmp<cond> instruction and Double FPU registers. (immediate): Disable optimize in dmov #imm case. (displacement): Add double displacement in dmov instraction. * config/tc-rx.c (rx_use_conventional_section_names): Invert default value in rx-*-linux target. (cpu_type): Add additional ELF flags. (cpu_type_list): Add RXv3. (md_parse_option): Refer elf_flags from cpu_type_list. (md_show_usage): Add rxv3 and rxv3-dfpu. (rx_bytesT): Add post byte. (rx_bfield): New. generate bfmov / bfmovz "imm" field. (rx_post): New. Set instruction post byte. (md_assemble): Add post byte. doc/c-rx.texi: Add cpu types. * testsuite/gas/rx/Xtod.d: New. * testsuite/gas/rx/Xtod.sm: New. * testsuite/gas/rx/bfmov.d: New. * testsuite/gas/rx/bfmov.sm: New. * testsuite/gas/rx/dabs.d: New. * testsuite/gas/rx/dabs.sm: New. * testsuite/gas/rx/dadd.d: New. * testsuite/gas/rx/dadd.sm: New. * testsuite/gas/rx/dcmp.d: New. * testsuite/gas/rx/dcmp.sm: New. * testsuite/gas/rx/ddiv.d: New. * testsuite/gas/rx/ddiv.sm: New. * testsuite/gas/rx/dmov.d: New. * testsuite/gas/rx/dmov.sm: New. * testsuite/gas/rx/dmul.d: New. * testsuite/gas/rx/dmul.sm: New. * testsuite/gas/rx/dneg.d: New. * testsuite/gas/rx/dneg.sm: New. * testsuite/gas/rx/dpopm.d: New. * testsuite/gas/rx/dpopm.sm: New. * testsuite/gas/rx/dpushm.d: New. * testsuite/gas/rx/dpushm.sm: New. * testsuite/gas/rx/dround.d: New. * testsuite/gas/rx/dround.sm: New. * testsuite/gas/rx/dsqrt.d: New. * testsuite/gas/rx/dsqrt.sm: New. * testsuite/gas/rx/dsub.d: New. * testsuite/gas/rx/dsub.sm: New. * testsuite/gas/rx/dtoX.d: New. * testsuite/gas/rx/dtoX.sm: New. * testsuite/gas/rx/macros.inc: Add double FPU registers. * testsuite/gas/rx/mvfdc.d: New. * testsuite/gas/rx/mvfdc.sm: New. * testsuite/gas/rx/mvfdr.d: New. * testsuite/gas/rx/mvfdr.sm: New. * testsuite/gas/rx/mvtdc.d: New. * testsuite/gas/rx/mvtdc.sm: New. * testsuite/gas/rx/rstr.d: New. * testsuite/gas/rx/rstr.sm: New. * testsuite/gas/rx/rx.exp: Use rxv3-dfpu option. * testsuite/gas/rx/save.d: New. * testsuite/gas/rx/save.sm: New. * testsuite/gas/rx/xor.d: New. * testsuite/gas/rx/xor.sm: Add pattern.
2019-01-01Update year range in copyright notice of binutils filesAlan Modra64-66/+66
2018-12-05[aarch64] Add support for pointer authentication B keySam Tebbs1-0/+8
Armv8.3-A has another key used in pointer authentication called the B-key (other than the A-key that is already supported). In order for stack unwinders to work it is necessary to be able to identify frames that have been signed with the B-key rather than the A-key and it was felt that keeping this as an augmentation character in the CIE was the best bet. The DWARF extensions for ARM therefore propose to add a new augmentation character 'B' to the CIE augmentation string and the corresponding cfi directive ".cfi_b_key_frame". I've made the relevant changes to GAS and LD to add support for B-key unwinding, which required modifying LD to check for 'B' in the augmentation string, adding the ".cfi_b_key_frame" directive to GAS and adding a "pauth_key" field to GAS's fde_entry and cie_entry structs. The pointer authentication instructions will behave as NOPs on architectures that don't support them, and so a check for the architecture being assembled for is not necessary since there will be no behavioural difference between augmentation strings with and without the 'B' character on such architectures. 2018-12-05 Sam Tebbs <sam.tebbs@arm.com> bfd/ * elf-eh-frame.c (_bfd_elf_parse_eh_frame): Add check for 'B'. gas/ * dw2gencfi.c (struct cie_entry): Add tc_cie_entry_extras invocation. (alloc_fde_entry): Add tc_fde_entry_init_extra invocation. (output_cie): Add tc_output_cie_extra invocation. (select_cie_for_fde): Add tc_cie_fde_equivalent_extra and tc_cie_entry_init_extra invocation. (frch_cfi_data, cfa_save_data): Move to dwgencfi.h. * config/tc-aarch64.c (s_aarch64_cfi_b_key_frame): Declare. (md_pseudo_table): Add "cfi_b_key_frame". * config/tc-aarch64.h (tc_fde_entry_extras, tc_cie_entry_extras, tc_fde_entry_init_extra, tc_output_cie_extra, tc_cie_fde_equivalent_extra, tc_cie_entry_init_extra): Define. * dw2gencfi.h (struct fde_entry): Add tc_fde_entry_extras invocation. (pointer_auth_key): Define. (frch_cfi_data, cfa_save_data): Move from dwgencfi.c. * doc/c-aarch64.texi (.cfi_b_key_frame): Add documentation. * testsuite/gas/aarch64/(pac_ab_key.d, pac_ab_key.s): New file.
2018-11-30GAS/MIPS: Add `-mfix-r5900' option for the R5900 short loop erratumFredrik Noring2-0/+17
`-march=r5900' already enables the R5900 short loop workaround. However, the R5900 ISA and most other MIPS ISAs are mutually exclusive since R5900-specific instructions are generated as well. The `-mfix-r5900' option can be used in combination with e.g. `-mips2' or `-mips3' to generate generic MIPS binaries that also work with the R5900 target. This change has been tested with `make RUNTESTFLAGS=mips.exp check-gas' for the targets `mipsr5900el-unknown-linux-gnu', `mipsr5900el-elf' and `mips3-unknown-linux-gnu'. gas/ * config/tc-mips.c (mips_fix_r5900, mips_fix_r5900_explicit): New variables. (options): Add OPTION_FIX_R5900 and OPTION_NO_FIX_R5900 enumeration constants. (md_longopts): Add "mfix-r5900" and "mno-fix-r5900" options. (can_swap_branch_p, md_parse_option, mips_after_parse_args): Handle the new options. (md_show_usage): Document the `-mfix-r5900' option. * doc/as.texi: Likewise. * doc/c-mips.texi: Likewise. * testsuite/gas/mips/mips.exp: Run R5900 dump tests. * testsuite/gas/mips/r5900-fix.d: Test `-mfix-r5900' option. * testsuite/gas/mips/r5900-fix.s: Likewise. * testsuite/gas/mips/r5900-no-fix.d: Test `-mno-fix-r5900'. * testsuite/gas/mips/r5900-no-fix.s: Likewise.
2018-11-27RISC-V: Add .insn CA support.Jim Wilson1-1/+10
gas/ * config/tc-riscv.c (validate_riscv_insn) <'F'>: Add support for CF6 and CF2 operands. (riscv_ip) <'F'>: Likewise. * doc/c-riscv.texi (RISC-V-Formats): Add func6 abbreviation. Use rs2 instead of rs1 in CR description. Add CA docs. * gas/testsuite/riscv/insn.s: Add use of .insn ca. * gas/testsuite/riscv/insn.d: Update to match. include/ * opcode/riscv.h (OP_MASK_CFUNCT6, OP_SH_CFUNCT6): New. (OP_MASK_CFUNCT2, OP_SH_CFUNCT2): New. opcodes/ * riscv-opc.c (ciw): Fix whitespace to align columns. (ca): New.
2018-11-12[BINUTILS, AARCH64, 1/8] Add support for Memory Tagging Extension for ARMv8.5-ASudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions. Memory Tagging Extension is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch adds the new command line option and the new feature macros. *** include/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New. *** opcodes/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_memtag): New. (MEMTAG, MEMTAG_INSN): New. *** gas/ChangeLog *** 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): Add "memtag" as a new option. * doc/c-aarch64.texi: Document the same.
2018-10-29Move struc-symbol.h to symbols.cAlan Modra1-9/+2
This file was never supposed to be widely used. The fact that it has found its way into many gas files led to bugs, typically when code expecting a symbolS* to point at a struct symbol is presented with a struct local_symbol. Also, commit 158184ac9e changed these structs in 2012 but didn't catch all places where symbol bsym was being used to test for a local_symbol. * Makefile.am (HFILES): Delete struc-symbol.h. * doc/internals.texi: Delete struc-symbol.h reference and out of date local symbol description. * struc-symbol.h: Delete. Move contents to.. * symbols.c: ..here. (symbol_on_chain, symbol_symbolS): New functions. * symbols.h (symbol_on_chain, symbol_symbolS): Declare. * cgen.c: Don't #include struc-symbol.h. (gas_cgen_parse_operand): Don't test for local_symbol using bsym, instead call symbol_symbolS. Use symbol_get_bfdsym. (weak_operand_overflow_check, make_right_shifted_expr): Use symbol accessors. * config/obj-coff.c: Don't #include struc-symbol.h. (GET_FILENAME_STRING): Delete. * config/obj-elf.c: Don't #include struc-symbol.h. (elf_file_symbol): Use symbol accessors. (elf_adjust_symtab): Call symbol_on_chain. * config/obj-evax.c: Don't #include struc-symbol.h. * config/tc-nds32.c: Likewise. * config/tc-rl78.c: Likewise. * config/tc-rx.c: Likewise. * config/tc-alpha.c: Likewise. (add_to_link_pool, s_alpha_comm): Use symbol accessors. * config/tc-arc.c: Don't #include struc-symbol.h. (arc_check_relocs): Use symbol accessors, testing gas symbol section rather than bfd symbol section. * config/tc-avr.c: Don't #include struc-symbol.h. (avr_patch_gccisr_frag): Use symbol accessors. * config/tc-bfin.c: Don't #include struc-symbol.h. (bfin_loop_beginend): Use symbol accessors. * config/tc-csky.c: Don't #include struc-symbol.h. (v2_work_movih, v2_work_ori): Use symbol accessors. Check for absolute symbol as well as O_constant. * config/tc-riscv.c: Don't #include struc-symbol.h. (riscv_pre_output_hook): Use symbol accessors. * config/tc-s390.c: Don't #include struc-symbol.h. (s390_literals): Use symbol accessors. * config/tc-score.c (s3_build_la_pic, s3_build_lwst_pic): Use symbol accessors. (s3_relax_branch_inst16, s3_relax_cmpbranch_inst32): Don't test symbol bsym. * config/tc-score7.c: Don't #include struc-symbol.h. (s7_build_la_pic, s7_build_lwst_pic): Use symbol accessors. (s7_b32_relax_to_b16): Don't test symbol bsym. * config/tc-sh.c: Don't #include struc-symbol.h. (insert_loop_bounds): Use symbol accessors. (sh_frob_section): Remove bogus symbol canonicalization. * config/tc-tic54x.c: Don't #include struc-symbol.h. (tic54x_bss): Use symbol accessors. * config/tc-tilegx.c: Don't #include struc-symbol.h. (emit_tilegx_instruction, tilegx_parse_name): Use symbol accessors. * config/tc-tilepro.c: Don't #include struc-symbol.h. (emit_tilepro_instruction, tilepro_parse_name): Use accessors. * config/tc-xtensa.c: Don't #include struc-symbol.h. (xg_assemble_vliw_tokens): Use symbol accessors. (xg_order_trampoline_chain): Likewise. * ehopt.c: Don't #include struc-symbol.h. (check_eh_frame): Correct local symbol test. Use symbol accessors. * write.c: Don't #include struc-symbol.h. (create_note_reloc, maybe_generate_build_notes): Use symbol accessors. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate.
2018-10-09[PATCH, BINUTULS, AARCH64, 9/9] Add SSBS to MSR/MRSSudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) The encodings can be found in the System Register XML. This patch adds support for the mitigation for Spectre Variant 4 by adding the PSTATE bit SSBS which are accessible using MSR and MRS instructions. Although this is a mandatory addition to the ARMv8.5-A, it is permitted to be added to any version of the ARMv8 architecture. This is enabled using the command line option of +ssbs for older versions. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SSBS): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SSBS by default. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (operand_general_constraint_met_p): Add SSBS in the check for one-bit immediate. (aarch64_sys_regs): New entry for SSBS. (aarch64_sys_reg_supported_p): New check for above. (aarch64_pstatefields): New entry for SSBS. (aarch64_pstatefield_supported_p): New check for above. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): Add new "ssbs". * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/ssbs-illegal1.d: New test. * testsuite/gas/aarch64/ssbs-illegal1.l: New test. * testsuite/gas/aarch64/ssbs-illegal2.d: New test. * testsuite/gas/aarch64/ssbs-illegal2.l: New test. * testsuite/gas/aarch64/ssbs.s: New test. * testsuite/gas/aarch64/ssbs1.d: Test with +ssbs * testsuite/gas/aarch64/ssbs2.d: Test with armv8.5-a.
2018-10-09[PATCH, BINUTILS, AARCH64, 6/9] Add Random number instructionsSudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) The encodings can be found in the System Register XML. This patch adds the following: MSR Xn, RNDR MSR Xn, RNDRRS These are optional instructions in ARMv8.5-A and hence the new +rng is added. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_RNG): New. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-opc.c (aarch64_sys_regs): New entries for rndr and rndrrs. (aarch64_sys_reg_supported_p): New check for above. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): New "rng" option. * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/sysreg-4.s: Test both instructions. * testsuite/gas/aarch64/sysreg-4.d: Likewise. * testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
2018-10-09[PATCH, BINUTILS, AARCH64, 4/9] Add Execution and Data Restriction instructionsSudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order) This patch adds the prediction restriction instructions (that is, cfp, dvp, cpp). These instructions are retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a new +predres which can be used by the older architectures. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default. (aarch64_opnd): Add AARCH64_OPND_SYSREG_SR. (aarch64_sys_regs_sr): Declare new table. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-dis.c (aarch64_ext_sysins_op): Add case for AARCH64_OPND_SYSREG_SR. * aarch64-opc.c (aarch64_print_operand): Likewise. (aarch64_sys_regs_sr): Define table. (aarch64_sys_ins_reg_supported_p): Check for RCTX with AARCH64_FEATURE_PREDRES. * aarch64-tbl.h (aarch64_feature_predres): New. (PREDRES, PREDRES_INSN): New. (aarch64_opcode_table): Add entries for cfp, dvp and cpp. (AARCH64_OPERANDS): Add new description for SYSREG_SR. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New. (parse_operands): Add entry for AARCH64_OPND_SYSREG_SR. (md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh with aarch64_sys_regs_sr. (aarch64_features): Add new "predres" option for older architectures. * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/sysreg-4.s: New. * testsuite/gas/aarch64/sysreg-4.d: New. * testsuite/gas/aarch64/illegal-sysreg-4.d: New. * testsuite/gas/aarch64/illegal-sysreg-4.l: New. * testsuite/gas/aarch64/predres.s: New. * testsuite/gas/aarch64/predres.d: New.
2018-10-09[PATCH, BINUTILS, AARCH64, 3/9] Add instruction SB for ARMv8.5-ASudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order) This instruction is retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence a new command line option of "+sb" is added for older architectures. *** include/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_SB): New. (AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_sb): New. (SB, SB_INSN): New. (aarch64_opcode_table): Add entry for sb. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. *** gas/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_features): Add new "sb" option for older architectures. * doc/c-aarch64.texi: Document the same. * testsuite/gas/aarch64/sb.s: New. * testsuite/gas/aarch64/sb.d: New.
2018-10-09[PATCH, BINUTILS, AARCH64, 1/9] Add -march=armv8.5-a and related internal ↵Sudakshina Das1-1/+2
feature macros This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This is the first of the patch series and adds -march=armv8.5-a and other internal feature marcos needed for it. 2018-10-09 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (aarch64_archs): New entry for armv8.5-a. * doc/c-aarch64.texi: Add documentation for the same. *** include/ChnageLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_5): New. (AARCH64_ARCH_V8_5): New. *** opcodes/ChangeLog *** 2018-10-09 Sudakshina Das <sudi.das@arm.com> * aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New. (ARMV8_5, V8_5_INSN): New.
2018-10-05[Arm, 3/3] Add Execution and Data Prediction instructions for AArch32Sudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This patch adds the Execution and Data Prediction Restriction instructions (that is, cfprctx, dvprxtc, cpprctx). These are all aliases to MCR and are disassembled as such. This instruction is retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a new +predres for older versions of the architecture. *** include/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_EXT2_PREDRES): New. (ARM_ARCH_V8_5A): Add ARM_EXT2_PREDRES by default. *** gas/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (arm_ext_predres): New. (insns): Add new cfprctx, dvprctx and cpprctx instructions. (arm_extensions): Add "predres". * doc/c-arm.texi: Document the above. * testsuite/gas/arm/predres-bad.d: New test. * testsuite/gas/arm/predres-bad.l: New test. * testsuite/gas/arm/predres.s: New test. * testsuite/gas/arm/predres1.d: New test. * testsuite/gas/arm/predres2.d: New test.
2018-10-05[Arm, 2/3] Add instruction SB for AArch32Sudakshina Das1-0/+2
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This patch adds the instruction SB. This instruction is retrospectively made optional for all versions of the architecture from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a new "+sb" for older archtectures. *** include/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_EXT2_SB): New. (ARM_ARCH_V8_5A): Add ARM_EXT2_SB by default. *** opcodes/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * arm-dis.c (arm_opcodes): Add sb. (thumb32_opcodes): Likewise. *** gas/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (arm_ext_sb): New. (insns): Add new sb instruction. (arm_extensions): Add "sb". * doc/c-arm.texi: Document the above. * testsuite/gas/arm/sb-bad.d: New test. * testsuite/gas/arm/sb-bad.l: New test. * testsuite/gas/arm/sb-thumb1.d: New test. * testsuite/gas/arm/sb-thumb2.d: New test. * testsuite/gas/arm/sb.s: New test. * testsuite/gas/arm/sb1.d: New test. * testsuite/gas/arm/sb2.d: New test.
2018-10-05[Arm, 1/3] Add -march=armv8.5-a and related internal feature macros to AArch32Sudakshina Das1-0/+1
This patch is part of the patch series to add support for ARMv8.5-A extensions. (https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools) This is the first of the patch series and adds -march=armv8.5-a and other internal feature marcos needed for it. *** gas/ChangeLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * config/tc-arm.c (arm_archs): New entry for armv8.5-a. (cpu_arch_ver): Likewise. * doc/c-arm.texi: Add documentation for the same. * testsuite/gas/arm/attr-march-armv8_5-a.d: New. *** include/ChnageLog *** 2018-10-05 Sudakshina Das <sudi.das@arm.com> * opcode/arm.h (ARM_EXT2_V8_5A): New. (ARM_AEXT2_V8_5A, ARM_ARCH_V8_5A): New.
2018-10-05or1k: Add OpenRISC gas documentationStafford Horne5-0/+313
gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * doc/Makefile.am (CPU_DOCS): Add entry for OpenRISC. * doc/Makefile.in: Regenerated. * doc/all.texi: Set OPENRISC. * doc/as.texi: Document OpenRISC. * doc/c-or1k.texi: New file.
2018-09-17x86: Add -mvexwig=[0|1] option to assemblerH.J. Lu1-0/+10
Add -mvexwig=[0|1] option to x86 assembler to control how the assembler should encode the VEX.W bit in WIG VEX instructions. * gas/NEWS: Mention -mvexwig=[0|1] option. * config/tc-i386.c (vexwig): New. (build_vex_prefix): Set the VEX.W bit for -mvexwig=1 for WIG VEX instructions. (OPTION_MVEXWIG): New. (md_longopts): Add -mvexwig=. (md_parse_option): Handle OPTION_MVEXWIG. (md_show_usage): Show -mvexwig=[0|1]. * doc/c-i386.texi: Document -mvexwig=[0|1]. * testsuite/gas/i386/avx-wig.d: New file. * testsuite/gas/i386/avx-wig.s: Likewise. * testsuite/gas/i386/avx2-wig.d: Likewise. * testsuite/gas/i386/avx2-wig.s: Likewise. * testsuite/gas/i386/x86-64-avx-wig.d: Likewise. * testsuite/gas/i386/x86-64-avx-wig.s: Likewise. * testsuite/gas/i386/x86-64-avx2-wig.d: Likewise. * testsuite/gas/i386/x86-64-avx2-wig.s: Likewise. * testsuite/gas/i386/i386.exp: Run avx-wig, avx2-wig, x86-64-avx-wig and x86-64-avx2-wig.
2018-08-31x86: Extend assembler to generate GNU property notesH.J. Lu1-0/+9
Add -mx86-used-note=[yes|no] option to generate (or not) GNU property notes with GNU_PROPERTY_X86_FEATURE_2_USED and GNU_PROPERTY_X86_ISA_1_USED properties. If the assembly input contains no instructions, set the GNU_PROPERTY_X86_UINT32_VALID bit in GNU_PROPERTY_X86_FEATURE_2_USED property. Add a --enable-x86-used-note configure time option to set the default behavior. Set the default if the configure option is not used to "no". * NEWS: Mention -mx86-used-note=[no|yes]. * configure.ac: Add --enable-x86-used-note. Define DEFAULT_X86_USED_NOTE. * config.in: Regenerated. * configure: Likewise. * config/tc-i386.c (x86_isa_1_used): New. (x86_feature_2_used): Likewise. (x86_used_note): Likewise. (_i386_insn): Add has_regmmx, has_regxmm, has_regymm and has_regzmm. (build_modrm_byte): Set i.has_regmmx, i.has_regzmm. i.has_regymm and i.has_regxmm. (x86_cleanup): New function. (output_insn): Update x86_isa_1_used and x86_feature_2_used. (OPTION_X86_USED_NOTE): New. (md_longopts): Add -mx86-used-note=. (md_parse_option): Handle OPTION_X86_USED_NOTE. (md_show_usage): Display -mx86-used-note=. * config/tc-i386.h (x86_cleanup): New prototype. (md_cleanup): New. * doc/c-i386.texi: Document -mx86-used-note=.
2018-08-29[MIPS] Add Loongson 2K1000 proccessor support.Chenghua Xu1-0/+1
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs264e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS264E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs264e to bfd_mach_mips_gs464e extension. binutils/ * NEWS: Mention Loongson 2K1000 proccessor support. * readelf.c (get_machine_flags): Handle gs264e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS264E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS264E. (mips_cpu_info_table): Add gs264e descriptors. * doc/as.texi (march table): Add gs264e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS264E. * opcode/mips.h (CPU_XXX): New CPU_GS264E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs264e and gs464e. opcodes/ * mips-dis.c (mips_arch_choices): Add gs264e descriptors.
2018-08-29[MIPS] Add Loongson 3A2000/3A3000 proccessor support.Chenghua Xu1-0/+1
bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs464e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS464E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs464e to bfd_mach_mips_gs464 extension. binutils/ * NEWS: Mention Loongson 3A2000/3A3000 proccessor support. * readelf.c (get_machine_flags): Handle gs464e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS464E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS464E. (mips_cpu_info_table): Add gs464e descriptors. * doc/as.texi (march table): Add gs464e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS464E. * opcode/mips.h (CPU_XXX): New CPU_GS464E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs464e and gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464e descriptors.
2018-08-29[MIPS] Add Loongson 3A1000 proccessor support.Chenghua Xu1-1/+1
bfd/ * archures.c (bfd_architecture): Rename bfd_mach_mips_loongson_3a to bfd_mach_mips_gs464. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Likewise. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Likewise. (bfd_mips_isa_ext_mach): Likewise. (bfd_mips_isa_ext): Likewise. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. binutils/ * NEWS: Mention Loongson 3A1000 proccessor support. * readelf.c (get_machine_flags): Rename loongson-3a to gs464. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. elfcpp/ * mips.c (EF_MIPS_MACH): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Rename CPU_LOONGSON_3A to CPU_GS464. (mips_cpu_info_table): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * doc/as.texi (march table): Rename loongson3a to gs464. * testsuite/gas/mips/loongson-3a-mmi.d: Set "ISA Extension" flag to None. gold/ * mips.cc (Mips_mach, add_machine_extensions, elf_mips_mach): Rename loongson3a to gs464. (mips_isa_ext_mach, mips_isa_ext): Delete loongson3a. (infer_abiflags): Use ases instead of isa_ext for infer ABI flags. (elf_mips_mach_name): Rename loongson3a to gs464. include/ * elf/mips.h (E_MIPS_MACH_XXX): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. (AFL_EXT_XXX): Delete AFL_EXT_LOONGSON_3A. * opcode/mips.h (INSN_XXX): Delete INSN_LOONGSON_3A. (CPU_XXX): Rename CPU_LOONGSON_3A to CPU_GS464. * opcode/mips.h (mips_isa_table): Delete CPU_LOONGSON_3A case. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Rename loongson3a to gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * mips-opc.c (mips_opcodes): Change Comments.
2018-08-29[MIPS/GAS] Add Loongson EXT2 Instructions support.Chenghua Xu2-0/+24
bfd/ * elfxx-mips.c (print_mips_ases): Add Loongson EXT2 extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT2 extension. gas/ * NEWS: Mention Loongson EXTensions R2 (EXT2) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT2 and OPTION_NO_LOONGSON_EXT2. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT2 to AFL_ASE_LOONGSON_EXT2. (md_show_usage): Add help for -mloongson-ext2 and -mno-loongson-ext2. * doc/as.texi: Document -mloongson-ext2, -mno-loongson-ext2. * doc/c-mips.texi: Document -mloongson-ext2, -mno-loongson-ext2, .set loongson-ext2 and .set noloongson-ext2. * testsuite/gas/mips/loongson-ext2.d: New test. * testsuite/gas/mips/loongson-ext2.s: New test. * testsuite/gas/mips/mips.exp: Run loongson-ext2 test. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT2): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT2. * opcode/mips.h (ASE_LOONGSON_EXT2): New macro. opcodes/ * mips-dis.c (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (LEXT2): New macro. (mips_opcodes): Add cto, ctz, dcto, dctz instructions.
2018-08-29[MIPS/GAS] Split Loongson EXT Instructions from loongson3a.Chenghua Xu2-0/+22
bfd/ * elfxx-mips.c (infer_mips_abiflags): Use ases instead of isa_ext for infer ABI flags. (print_mips_ases): Add Loongson EXT extension. binutils/ * readelf.c (print_mips_ases): Add Loongson EXT extension. elfcpp/ * mips.h (AFL_ASE_LOONGSON_EXT): New enum. gas/ * NEWS: Mention Loongson EXTensions (EXT) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_EXT and OPTION_NO_LOONGSON_EXT. (md_longopts): Likewise. (mips_ases): Define availability for EXT. (mips_convert_ase_flags): Map ASE_LOONGSON_EXT to AFL_ASE_LOONGSON_EXT. (mips_cpu_info_table): Add ASE_LOONGSON_EXT for loongson3a. (md_show_usage): Add help for -mloongson-ext and -mno-loongson-ext. * doc/as.texi: Document -mloongson-ext, -mno-loongson-ext. * doc/c-mips.texi: Document -mloongson-ext, -mno-loongson-ext, .set loongson-ext and .set noloongson-ext. * testsuite/gas/mips/loongson-mmi.d: Add ASE flag. include/ * elf/mips.h (AFL_ASE_LOONGSON_EXT): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_EXT. * opcode/mips.h (ASE_LOONGSON_EXT): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add EXT to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-ext option. (print_mips_disassembler_options): Document -M loongson-ext. * mips-opc.c (IL3A): Delete. * mips-opc.c (LEXT): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LEXT for EXT instructions.
2018-08-29[MIPS/GAS] Split Loongson CAM Instructions from loongson3aChenghua Xu2-0/+22
bfd/ * elfxx-mips.c (print_mips_ases): Add CAM extension. binutils/ * readelf.c (print_mips_ases): Add CAM extension. gas/ * NEWS: Mention Loongson Content Address Memory (CAM) support. * config/tc-mips.c (options): Add OPTION_LOONGSON_CAM and OPTION_NO_LOONGSON_CAM. (md_longopts): Likewise. (mips_ases): Define availability for CAM. (mips_convert_ase_flags): Map ASE_LOONGSON_CAM to AFL_ASE_LOONGSON_CAM. (mips_cpu_info_table): Add ASE_LOONGSON_CAM for loongson3a. (md_show_usage): Add help for -mloongson-cam and -mno-loongson-cam. * doc/as.texi: Document -mloongson-cam, -mno-loongson-cam. * doc/c-mips.texi: Document -mloongson-cam, -mno-loongson-cam, .set loongson-cam and .set noloongson-cam. * testsuite/gas/mips/loongson-3a-2.d: Move cam test to ... * testsuite/gas/mips/loongson-cam.d: Here. Add ISA/ASE flag verification. * testsuite/gas/mips/loongson-3a-2.s: Move cam test to ... * testsuite/gas/mips/loongson-cam.s: Here. * testsuite/gas/mips/loongson-3a-mmi.d: Add ASE flag. * testsuite/gas/mips/mips.exp: Run loongson-cam test. include/ * elf/mips.h (AFL_ASE_LOONGSON_CAM): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_CAM. * opcode/mips.h (ASE_LOONGSON_CAM): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add CAM to loongson3a descriptors. (parse_mips_ase_option): Handle -M loongson-cam option. (print_mips_disassembler_options): Document -M loongson-cam. * mips-opc.c (LCAM): New macro. (mips_opcodes): Replace IL2F|IL3A marking with LCAM for CAM instructions.
2018-08-11x86: Add CpuCMOV and CpuFXSRH.J. Lu1-3/+8
There are separate CPUID feature bits for fxsave/fxrstor and cmovCC instructions. This patch adds CpuCMOV and CpuFXSR to replace Cpu686 on corresponding instructions. gas/ * config/tc-i386.c (cpu_arch): Add .cmov and .fxsr. (cpu_noarch): Add nocmov and nofxsr. * doc/c-i386.texi: Document cmov and fxsr. opcodes/ * i386-gen.c (cpu_flag_init): Add CpuCMOV and CpuFXSR to CPU_I686_FLAGS. Add CPU_CMOV_FLAGS, CPU_FXSR_FLAGS, CPU_ANY_CMOV_FLAGS and CPU_ANY_FXSR_FLAGS. (cpu_flags): Add CpuCMOV and CpuFXSR. * i386-opc.tbl: Replace Cpu686 with CpuFXSR on fxsave, fxsave64, fxrstor and fxrstor64. Replace Cpu686 with CpuCMOV on cmovCC. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner5-0/+244
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
generated by cgit v1.1 at 2024-07-13 09:21:10 +0000