aboutsummaryrefslogtreecommitdiff
path: root/gas/doc/as.texinfo
AgeCommit message (Collapse)AuthorFilesLines
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-8249/+0
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-14MIPS: Add Global INValidate ASE supportFaraz Shahbazker1-0/+7
Add support for the Global INValidate Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 187-191 bfd/ * elfxx-mips.c (print_mips_ases): Add GINV extension. binutils/ * readelf.c (print_mips_ases): Add GINV extension. gas/ * NEWS: Mention MIPS Global INValidate ASE support. * config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV. (md_longopts): Likewise. (mips_ases): Define availability for GINV. (mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV. (md_show_usage): Add help for -mginv and -mno-ginv. * doc/as.texinfo: Document -mginv, -mno-ginv. * doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and .set noginv. * testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV ASE. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/ase-errors-1.l: Likewise. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ginv.d: New test. * testsuite/gas/mips/ginv-err.d: New test. * testsuite/gas/mips/ginv-err.l: New test stderr output. * testsuite/gas/mips/ginv.s: New test source. * testsuite/gas/mips/ginv-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ * elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros. (AFL_ASE_MASK): Update to include AFL_ASE_GINV. * opcode/mips.h: Document "+\" operand format. (ASE_GINV): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and mips64r6 descriptors. (parse_mips_ase_option): Handle -Mginv option. (print_mips_disassembler_options): Document -Mginv. * mips-opc.c (decode_mips_operand) <+\>: New operand format. (GINV): New macro. (mips_opcodes): Define ginvi and ginvt.
2018-06-13MIPS: Add CRC ASE supportScott Egerton1-0/+7
Add support for the CRC Application Specific Extension for Release 6 of the MIPS Architecture. [1] "MIPS Architecture for Programmers Volume II-A: The MIPS32 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 143-148 [2] "MIPS Architecture for Programmers Volume II-A: The MIPS64 Instruction Set Manual", Imagination Technologies Ltd., Document Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2 "Alphabetical List of Instructions", pp. 165-170 ChangeLog: bfd/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elfxx-mips.c (print_mips_ases): Add CRC. binutils/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * readelf.c (print_mips_ases): Add CRC. gas/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> Maciej W. Rozycki <macro@mips.com> * config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC. (md_longopts): Likewise. (md_show_usage): Add help for -mcrc and -mno-crc. (mips_ases): Define availability for CRC and CRC64. (mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC. * doc/as.texinfo: Document -mcrc, -mno-crc. * doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and .set no-crc. * testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC ASE. * testsuite/gas/mips/ase-errors-2.l: Likewise. * testsuite/gas/mips/ase-errors-1.s: Likewise. * testsuite/gas/mips/ase-errors-2.s: Likewise. * testsuite/gas/mips/crc.d: New test. * testsuite/gas/mips/crc64.d: New test. * testsuite/gas/mips/crc-err.d: New test. * testsuite/gas/mips/crc64-err.d: New test. * testsuite/gas/mips/crc-err.l: New test stderr output. * testsuite/gas/mips/crc64-err.l: New test stderr output. * testsuite/gas/mips/crc.s: New test source. * testsuite/gas/mips/crc64.s: New test source. * testsuite/gas/mips/crc-err.s: New test source. * testsuite/gas/mips/crc64-err.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. include/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * elf/mips.h (AFL_ASE_CRC): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_CRC. * opcode/mips.h (ASE_CRC): New macro. * opcode/mips.h (ASE_CRC64): Likewise. opcodes/ 2018-06-13 Scott Egerton <scott.egerton@imgtec.com> Faraz Shahbazker <Faraz.Shahbazker@mips.com> * mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs. * mips-opc.c (CRC, CRC64): New macros. (mips_builtin_opcodes): Define crc32b, crc32h, crc32w, crc32cb, crc32ch and crc32cw for CRC. Define crc32d and crc32cd for CRC64.
2018-05-18Add support for the Freescale s12z processor.John Darrington1-0/+7
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-04-26Extend the assembler so that it can automatically generate GNU Build ↵Nick Clifton1-0/+9
attribute notes if none are present in the input files. gas * as.c (flag_generate_build_notes): New variable. (show_usage): Add entry for --generate-missing-build-notes. (parse_args): Parse --generate-missing-build-notes. * as.h: Export flag_generate_build_notes. * symbols.c (save_symbol_name): Ensure that the name parameter is not NULL. * write.c (create_obj_attrs_section): Reformat. (create_note_reloc): New function - creates a relocation for a field in a GNU Build attribute note. (maybe_generate_build_notes): New function - created GNU Build attribute notes if none are present in the output file. (write_object_file): Call maybe_generate_build_notes. * configure.ac (--enable-generate-build-notes): New option. * NEWS: Announce the new feature. * doc/as.textinfo: Document the new option. * config.in: Regenerate. * configure: Regenerate. binutils* readelf.c (is_32bit_abs_reloc): Support R_PARISC_DIR32 as a 32-bit absolute reloc for the HPPA target. * testsuite/binutils-all/note-5.d: New test. * testsuite/binutils-all/note-5.s: Source file for new test. * testsuite/binutils-all/objcopy.exp: Run new test.
2018-04-16Remove sh5 and sh64 supportAlan Modra1-2/+0
include/ * dis-asm.h: Remove sh5 and sh64 support. bfd/ * Makefile.am: Remove sh5 and sh64 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-sh.c: Likewise. * elf32-sh-relocs.h: Likewise. * elf32-sh.c: Likewise. * targets.c: Likewise. * elf32-sh64-com.c: Delete. * elf32-sh64.c: Delete. * elf32-sh64.h: Delete. * elf64-sh64.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove sh5 and sh64 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * sh-dis.c: Likewise. * sh64-dis.c: Delete. * sh64-opc.c: Delete. * sh64-opc.h: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. bintuils/ * testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support. gas/ * Makefile.am: Remove sh5 and sh64 support. * config/tc-sh.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/cfi/cfi.exp: Likewise. * testsuite/gas/sh/basic.exp: Likewise. * config/tc-sh64.c: Delete. * config/tc-sh64.h: Delete. * doc/c-sh64.texi: Delete. * testsuite/gas/sh/sh64/abi-32.d: Delete. * testsuite/gas/sh/sh64/abi-32.s: Delete. * testsuite/gas/sh/sh64/abi-64.d: Delete. * testsuite/gas/sh/sh64/abi-64.s: Delete. * testsuite/gas/sh/sh64/basic-1.d: Delete. * testsuite/gas/sh/sh64/basic-1.s: Delete. * testsuite/gas/sh/sh64/case-1.d: Delete. * testsuite/gas/sh/sh64/case-1.s: Delete. * testsuite/gas/sh/sh64/case-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange1-1.d: Delete. * testsuite/gas/sh/sh64/crange1-2.d: Delete. * testsuite/gas/sh/sh64/crange1.s: Delete. * testsuite/gas/sh/sh64/crange2-1.d: Delete. * testsuite/gas/sh/sh64/crange2-2.d: Delete. * testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete. * testsuite/gas/sh/sh64/crange2.s: Delete. * testsuite/gas/sh/sh64/crange3-1.d: Delete. * testsuite/gas/sh/sh64/crange3.s: Delete. * testsuite/gas/sh/sh64/crange4-1.d: Delete. * testsuite/gas/sh/sh64/crange4.s: Delete. * testsuite/gas/sh/sh64/crange5-1.d: Delete. * testsuite/gas/sh/sh64/crange5.s: Delete. * testsuite/gas/sh/sh64/creg-1.d: Delete. * testsuite/gas/sh/sh64/creg-1.s: Delete. * testsuite/gas/sh/sh64/creg-2.d: Delete. * testsuite/gas/sh/sh64/creg-2.s: Delete. * testsuite/gas/sh/sh64/datal-1.s: Delete. * testsuite/gas/sh/sh64/datal-2.d: Delete. * testsuite/gas/sh/sh64/datal-2.s: Delete. * testsuite/gas/sh/sh64/datal-3.s: Delete. * testsuite/gas/sh/sh64/datal32-1.d: Delete. * testsuite/gas/sh/sh64/datal32-3.d: Delete. * testsuite/gas/sh/sh64/datal64-1.d: Delete. * testsuite/gas/sh/sh64/datal64-3.d: Delete. * testsuite/gas/sh/sh64/eh-1.d: Delete. * testsuite/gas/sh/sh64/eh-1.s: Delete. * testsuite/gas/sh/sh64/endian-1.d: Delete. * testsuite/gas/sh/sh64/endian-1.s: Delete. * testsuite/gas/sh/sh64/endian-2.d: Delete. * testsuite/gas/sh/sh64/endian-2.s: Delete. * testsuite/gas/sh/sh64/err-1.s: Delete. * testsuite/gas/sh/sh64/err-2.s: Delete. * testsuite/gas/sh/sh64/err-3.s: Delete. * testsuite/gas/sh/sh64/err-4.s: Delete. * testsuite/gas/sh/sh64/err-abi-32.s: Delete. * testsuite/gas/sh/sh64/err-abi-64.s: Delete. * testsuite/gas/sh/sh64/err-dsp.s: Delete. * testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete. * testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt-1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete. * testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete. * testsuite/gas/sh/sh64/err-ptb-1.s: Delete. * testsuite/gas/sh/sh64/err-ptb-2.s: Delete. * testsuite/gas/sh/sh64/err.exp: Delete. * testsuite/gas/sh/sh64/immexpr1.s: Delete. * testsuite/gas/sh/sh64/immexpr2.s: Delete. * testsuite/gas/sh/sh64/immexpr32-1.d: Delete. * testsuite/gas/sh/sh64/immexpr32-2.d: Delete. * testsuite/gas/sh/sh64/immexpr64-1.d: Delete. * testsuite/gas/sh/sh64/immexpr64-2.d: Delete. * testsuite/gas/sh/sh64/lineno.d: Delete. * testsuite/gas/sh/sh64/lineno.s: Delete. * testsuite/gas/sh/sh64/localcom-1.d: Delete. * testsuite/gas/sh/sh64/localcom-1.s: Delete. * testsuite/gas/sh/sh64/mix-1.d: Delete. * testsuite/gas/sh/sh64/mix-1.s: Delete. * testsuite/gas/sh/sh64/mix-noexp-1.d: Delete. * testsuite/gas/sh/sh64/movi-1.s: Delete. * testsuite/gas/sh/sh64/movi-2.s: Delete. * testsuite/gas/sh/sh64/movi-3.d: Delete. * testsuite/gas/sh/sh64/movi-3.s: Delete. * testsuite/gas/sh/sh64/movi32-1.d: Delete. * testsuite/gas/sh/sh64/movi32-2.d: Delete. * testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/movi64-1.d: Delete. * testsuite/gas/sh/sh64/movi64-2.d: Delete. * testsuite/gas/sh/sh64/movi64-2.s: Delete. * testsuite/gas/sh/sh64/movi64-3.d: Delete. * testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt-1.d: Delete. * testsuite/gas/sh/sh64/pt-1.s: Delete. * testsuite/gas/sh/sh64/pt-2.s: Delete. * testsuite/gas/sh/sh64/pt-noexp-1.d: Delete. * testsuite/gas/sh/sh64/pt32-1.d: Delete. * testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete. * testsuite/gas/sh/sh64/pt64-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-1.d: Delete. * testsuite/gas/sh/sh64/pt64-32-2.d: Delete. * testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete. * testsuite/gas/sh/sh64/ptc-1.s: Delete. * testsuite/gas/sh/sh64/ptc32-1.d: Delete. * testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext-1.s: Delete. * testsuite/gas/sh/sh64/ptext32-1.d: Delete. * testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-32-1.d: Delete. * testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete. * testsuite/gas/sh/sh64/rel-1.s: Delete. * testsuite/gas/sh/sh64/rel-2.s: Delete. * testsuite/gas/sh/sh64/rel-3.s: Delete. * testsuite/gas/sh/sh64/rel-4.s: Delete. * testsuite/gas/sh/sh64/rel-5.s: Delete. * testsuite/gas/sh/sh64/rel32-1.d: Delete. * testsuite/gas/sh/sh64/rel32-2.d: Delete. * testsuite/gas/sh/sh64/rel32-3.d: Delete. * testsuite/gas/sh/sh64/rel32-4.d: Delete. * testsuite/gas/sh/sh64/rel32-5.d: Delete. * testsuite/gas/sh/sh64/rel64-1.d: Delete. * testsuite/gas/sh/sh64/rel64-2.d: Delete. * testsuite/gas/sh/sh64/rel64-3.d: Delete. * testsuite/gas/sh/sh64/rel64-4.d: Delete. * testsuite/gas/sh/sh64/rel64-5.d: Delete. * testsuite/gas/sh/sh64/relax-1.d: Delete. * testsuite/gas/sh/sh64/relax-1.s: Delete. * testsuite/gas/sh/sh64/relax-2.d: Delete. * testsuite/gas/sh/sh64/relax-2.s: Delete. * testsuite/gas/sh/sh64/relax-3.d: Delete. * testsuite/gas/sh/sh64/relax-3.s: Delete. * testsuite/gas/sh/sh64/sh64.exp: Delete. * testsuite/gas/sh/sh64/shift-1.s: Delete. * testsuite/gas/sh/sh64/shift-2.s: Delete. * testsuite/gas/sh/sh64/shift-3.s: Delete. * testsuite/gas/sh/sh64/shift32-1.d: Delete. * testsuite/gas/sh/sh64/shift32-3.d: Delete. * testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete. * testsuite/gas/sh/sh64/shift64-1.d: Delete. * testsuite/gas/sh/sh64/shift64-2.d: Delete. * testsuite/gas/sh/sh64/shift64-3.d: Delete. * testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete. * testsuite/gas/sh/sh64/syntax-1.d: Delete. * testsuite/gas/sh/sh64/syntax-1.s: Delete. * testsuite/gas/sh/sh64/syntax-2.d: Delete. * testsuite/gas/sh/sh64/syntax-2.s: Delete. * testsuite/gas/sh/sh64/ua-1.s: Delete. * testsuite/gas/sh/sh64/ua32-1.d: Delete. * testsuite/gas/sh/sh64/ua64-1.d: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove sh5 and sh64 support. * configure.tgt: Likewise. * ldlang.c: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-gc/pr13683.d: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/ld-r-1.d: Likewise. * testsuite/ld-sh/rd-sh.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * emulparams/shelf32.sh: Delete. * emulparams/shelf32_linux.sh: Delete. * emulparams/shelf32_nbsd.sh: Delete. * emulparams/shelf64.sh: Delete. * emulparams/shelf64_nbsd.sh: Delete. * emulparams/shlelf32.sh: Delete. * emulparams/shlelf32_linux.sh: Delete. * emulparams/shlelf32_nbsd.sh: Delete. * emulparams/shlelf64.sh: Delete. * emulparams/shlelf64_nbsd.sh: Delete. * emultempl/sh64elf.em: Delete. * testsuite/ld-sh/sh64/abi32.sd: Delete. * testsuite/ld-sh/sh64/abi32.xd: Delete. * testsuite/ld-sh/sh64/abi64.sd: Delete. * testsuite/ld-sh/sh64/abi64.xd: Delete. * testsuite/ld-sh/sh64/abixx-noexp.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.sd: Delete. * testsuite/ld-sh/sh64/cmpct1.xd: Delete. * testsuite/ld-sh/sh64/crange-1.s: Delete. * testsuite/ld-sh/sh64/crange-2a.s: Delete. * testsuite/ld-sh/sh64/crange-2b.s: Delete. * testsuite/ld-sh/sh64/crange-2c.s: Delete. * testsuite/ld-sh/sh64/crange-2d.s: Delete. * testsuite/ld-sh/sh64/crange-2e.s: Delete. * testsuite/ld-sh/sh64/crange-2f.s: Delete. * testsuite/ld-sh/sh64/crange-2g.s: Delete. * testsuite/ld-sh/sh64/crange-2h.s: Delete. * testsuite/ld-sh/sh64/crange-2i.s: Delete. * testsuite/ld-sh/sh64/crange1.rd: Delete. * testsuite/ld-sh/sh64/crange2.rd: Delete. * testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete. * testsuite/ld-sh/sh64/crange3-media.rd: Delete. * testsuite/ld-sh/sh64/crange3.dd: Delete. * testsuite/ld-sh/sh64/crange3.rd: Delete. * testsuite/ld-sh/sh64/crangerel1.rd: Delete. * testsuite/ld-sh/sh64/crangerel2.rd: Delete. * testsuite/ld-sh/sh64/dlsection-1.s: Delete. * testsuite/ld-sh/sh64/dlsection.sd: Delete. * testsuite/ld-sh/sh64/endian.dbd: Delete. * testsuite/ld-sh/sh64/endian.dld: Delete. * testsuite/ld-sh/sh64/endian.ld: Delete. * testsuite/ld-sh/sh64/endian.s: Delete. * testsuite/ld-sh/sh64/endian.sbd: Delete. * testsuite/ld-sh/sh64/endian.sld: Delete. * testsuite/ld-sh/sh64/gotplt.d: Delete. * testsuite/ld-sh/sh64/gotplt.map: Delete. * testsuite/ld-sh/sh64/gotplt.s: Delete. * testsuite/ld-sh/sh64/init-cmpct.d: Delete. * testsuite/ld-sh/sh64/init-media.d: Delete. * testsuite/ld-sh/sh64/init.s: Delete. * testsuite/ld-sh/sh64/init64.d: Delete. * testsuite/ld-sh/sh64/mix1-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix1.sd: Delete. * testsuite/ld-sh/sh64/mix1.xd: Delete. * testsuite/ld-sh/sh64/mix2-noexp.sd: Delete. * testsuite/ld-sh/sh64/mix2.sd: Delete. * testsuite/ld-sh/sh64/mix2.xd: Delete. * testsuite/ld-sh/sh64/rd-sh64.exp: Delete. * testsuite/ld-sh/sh64/rel-1.s: Delete. * testsuite/ld-sh/sh64/rel-2.s: Delete. * testsuite/ld-sh/sh64/rel32.xd: Delete. * testsuite/ld-sh/sh64/rel64.xd: Delete. * testsuite/ld-sh/sh64/relax.exp: Delete. * testsuite/ld-sh/sh64/relax1.s: Delete. * testsuite/ld-sh/sh64/relax2.s: Delete. * testsuite/ld-sh/sh64/relax3.s: Delete. * testsuite/ld-sh/sh64/relax4.s: Delete. * testsuite/ld-sh/sh64/reldl-1.s: Delete. * testsuite/ld-sh/sh64/reldl-2.s: Delete. * testsuite/ld-sh/sh64/reldl32.rd: Delete. * testsuite/ld-sh/sh64/reldl64.rd: Delete. * testsuite/ld-sh/sh64/relfail.exp: Delete. * testsuite/ld-sh/sh64/relfail.s: Delete. * testsuite/ld-sh/sh64/sh64-1.s: Delete. * testsuite/ld-sh/sh64/sh64-2.s: Delete. * testsuite/ld-sh/sh64/sh64.exp: Delete. * testsuite/ld-sh/sh64/shcmp-1.s: Delete. * testsuite/ld-sh/sh64/shdl-1.s: Delete. * testsuite/ld-sh/sh64/shdl-2.s: Delete. * testsuite/ld-sh/sh64/shdl32.xd: Delete. * testsuite/ld-sh/sh64/shdl64.sd: Delete. * testsuite/ld-sh/sh64/shdl64.xd: Delete. * testsuite/ld-sh/sh64/shmix-1.s: Delete. * testsuite/ld-sh/sh64/shmix-2.s: Delete. * testsuite/ld-sh/sh64/shmix-3.s: Delete. * testsuite/ld-sh/sh64/stobin-0-dso.d: Delete. * testsuite/ld-sh/sh64/stobin-1.d: Delete. * testsuite/ld-sh/sh64/stobin.s: Delete. * testsuite/ld-sh/sh64/stolib.s: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-16Remove i370 supportAlan Modra1-7/+0
include/ * elf/i370.h: Delete. * opcode/i370.h: Delete. bfd/ * Makefile.am: Remove i370 support. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * targets.c: Likewise. * cpu-i370.c: Delete. * elf32-i370.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * Makefile.am: Remove i370 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * i370-dis.c: Delete. * i370-opc.c: Delete. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * readelf.c: Remove i370 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * Makefile.am: Remove i370 support. * app.c: Likewise. * config/obj-elf.c: Likewise. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Likewise. * testsuite/gas/elf/warn-2.s: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * config/tc-i370.c: Delete. * config/tc-i370.h: Delete. * doc/c-i370.texi: Delete. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove i370 support. * configure.tgt: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * emulparams/elf32i370.sh: Delete. * scripttempl/elfi370.sc: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra1-259/+19
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-03-07x86: Rewrite NOP generation for fill and alignmentH.J. Lu1-3/+4
Rewrite NOP generation for fill and code alignment by: 1. Add a 11-byte NOP with another 0x66 prefix. 2. Remove the multi-byte NOP entries which consist of 2 instructions. 3. Select proper NOPs based on ISA and processor tuning. 4. Generate multiple NOPs with the longer NOPs first followed by the shorter NOP. 5. Use jump for larger NOP padding: a. > 8 bytes (2 NOPs) in 16-bit mode. b. > 14 bytes (2 NOPs) for older processors. c. > 77 bytes (7 NOPs) for newer processors. 6. Update MAX_MEM_FOR_RS_ALIGN_CODE to 4095. PR gas/22874 * config/tc-i386.c (f32_5): Removed. (f32_8): Likewise. (f32_9): Likewise. (f32_10): Likewise. (f32_11): Likewise. (f32_12): Likewise. (f32_13): Likewise. (f32_14): Likewise. (f16_5): Likewise. (f16_6): Likewise. (f16_7): Likewise. (f16_8): Likewise. (jump_31): Likewise. (alt64_11): Likewise. (alt64_patt): Likewise. (jump_disp8): New. (jump32_disp32): Likewise. (jump16_disp32): Likewise. (alt_11): Likewise. (f32_patt): Updated. (f16_patt): Likewise. (alt_patt): Add alt_11. (i386_align_code): Merged with ... (i386_generate_nops): This. Rewritten. (fits_in_imm7): Moved before i386_generate_nops. (fits_in_imm31): Likewise. * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Updated to 4095. (i386_align_code): Removed. (HANDLE_ALIGN): Rewritten with i386_generate_nops. * doc/as.texinfo: Update limits of control byte for x86 .nops directive. * testsuite/gas/i386/i386.exp: Run nops-7 and x86-64-nops-7. * gas/testsuite/gas/i386/noavx-3.l: Updated. * gas/testsuite/gas/i386/nop-1.d: Likewise. * gas/testsuite/gas/i386/nop-1.s: Likewise. * gas/testsuite/gas/i386/nop-2.d: Likewise. * gas/testsuite/gas/i386/nop-2.s: Likewise. * gas/testsuite/gas/i386/nop-3.d: Likewise. * gas/testsuite/gas/i386/nop-4.d: Likewise. * gas/testsuite/gas/i386/nop-5.d: Likewise. * gas/testsuite/gas/i386/nop-5.s: Likewise. * gas/testsuite/gas/i386/nop-6.d: Likewise. * gas/testsuite/gas/i386/nop-bad-1.l: Likewise. * gas/testsuite/gas/i386/nops-1-core2.d: Likewise. * gas/testsuite/gas/i386/nops-1-i386-i686.d: Likewise. * gas/testsuite/gas/i386/nops-1-i386.d: Likewise. * gas/testsuite/gas/i386/nops-1-i686.d: Likewise. * gas/testsuite/gas/i386/nops-1-k8.d: Likewise. * gas/testsuite/gas/i386/nops-1.d: Likewise. * gas/testsuite/gas/i386/nops-2-core2.d: Likewise. * gas/testsuite/gas/i386/nops-2-i386.d: Likewise. * gas/testsuite/gas/i386/nops-2.d: Likewise. * gas/testsuite/gas/i386/nops-3-i386.d: Likewise. * gas/testsuite/gas/i386/nops-3-i686.d: Likewise. * gas/testsuite/gas/i386/nops-3.d: Likewise. * gas/testsuite/gas/i386/nops-4-i386.d: Likewise. * gas/testsuite/gas/i386/nops-4-i686.d: Likewise. * gas/testsuite/gas/i386/nops-4.d: Likewise. * gas/testsuite/gas/i386/nops-4a-i686.d: Likewise. * gas/testsuite/gas/i386/nops-5-i686.d: Likewise. * gas/testsuite/gas/i386/nops-5.d: Likewise. * gas/testsuite/gas/i386/nops-6.d: Likewise. * gas/testsuite/gas/i386/nops16-1.d: Likewise. * gas/testsuite/gas/i386/x86-64-nop-1.d: Likewise. * gas/testsuite/gas/i386/x86-64-nop-2.d: Likewise. * gas/testsuite/gas/i386/x86-64-nop-5.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-1-core2.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-1-g64.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-1-k8.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-1-pentium.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-1.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-2.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-3.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-4-core2.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-4-k8.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-4.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-5-k8.d: Likewise. * gas/testsuite/gas/i386/x86-64-nops-5.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-1-core2.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-1-k8.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-1-pentium.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-1.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-2.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-3.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-4-core2.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-4-k8.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-4.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-5-k8.d: Likewise. * gas/testsuite/gas/i386/ilp32/x86-64-nops-5.d: Likewise. * gas/testsuite/gas/i386/nops-7.d: New file. * gas/testsuite/gas/i386/nops-7.s: Likewise. * gas/testsuite/gas/i386/x86-64-nops-7.d: Likewise.
2018-02-27gas: Rename .nop directive to .nopsH.J. Lu1-4/+4
Since directives of NO_PSEUDO_DOT targets don't have the leading '.' and "nop" can be a valid instruction, rename .nop directive to .nops to avoid conflict. * NEWS: Rename .nop to .nops. * doc/as.texinfo: Likewise. * read.c (potable): Add "nops". Remove "nop". (s_nop): Renamed to ... (s_nops): This. * read.h (s_nop): Renamed to ... (s_nops): This. * write.c (cvt_frag_to_fill): Rename .nop to .nops. (md_generate_nops): Likewise. (relax_segment): Likewise. * testsuite/gas/i386/nop-1.d: Updated. * testsuite/gas/i386/nop-1.s: Likewise. * testsuite/gas/i386/nop-2.d: Likewise. * testsuite/gas/i386/nop-2.s: Likewise. * testsuite/gas/i386/nop-3.d: Likewise. * testsuite/gas/i386/nop-3.s: Likewise. * testsuite/gas/i386/nop-4.d: Likewise. * testsuite/gas/i386/nop-4.s: Likewise. * testsuite/gas/i386/nop-5.d: Likewise. * testsuite/gas/i386/nop-5.s: Likewise. * testsuite/gas/i386/nop-6.d: Likewise. * testsuite/gas/i386/nop-6.s: Likewise. * testsuite/gas/i386/nop-bad-1.l: Likewise. * testsuite/gas/i386/nop-bad-1.s: Likewise. * testsuite/gas/i386/x86-64-nop-1.d: Likewise. * testsuite/gas/i386/x86-64-nop-2.d: Likewise. * testsuite/gas/i386/x86-64-nop-3.d: Likewise. * testsuite/gas/i386/x86-64-nop-4.d: Likewise. * testsuite/gas/i386/x86-64-nop-5.d: Likewise. * testsuite/gas/i386/x86-64-nop-6.d: Likewise.
2018-02-26GAS/doc: Clean up `.dc' and `.ds' directive descriptionsMaciej W. Rozycki1-5/+4
gas/ * doc/as.texinfo (Pseudo Ops): Clean up `.dc' and `.ds' descriptions.
2018-02-26Fix typo in documentation of assembler's .dc directive.Nick Clifton1-1/+1
* doc/as.texinfo (Dc): Fix typo.
2018-02-23Document the assembler's .dc, .dcb and .ds directives.Nick Clifton1-5/+103
* doc/as.texinfo (Pseudo Ops): Add nodes for .dc, .dcb and .ds.
2018-02-17Add .nop assembler directiveH.J. Lu1-0/+18
Implement the '.nop SIZE[, CONTROL]' assembler directive, which emits SIZE bytes filled with no-op instructions. SIZE is absolute expression. The optional CONTROL byte controls how no-op instructions should be generated. If the comma and @var{control} are omitted, CONTROL is assumed to be zero. For Intel 80386 and AMD x86-64 targets, CONTROL byte specifies the size limit of a single no-op instruction. The valid values of CONTROL byte are between 0 and 8 for 16-bit mode, between 0 and 10 for 32-bit mode, between 0 and 11 for 64-bit mode. When 0 is used, the no-op size limit is set to the maximum supported size. 2 new relax states, rs_space_nop and rs_fill_nop, are added to enum _relax_state, which are similar to rs_space and rs_fill, respectively, but they fill with no-op instructions, instead of a single byte. A target backend must override the default md_generate_nops to generate proper no-op instructions. Otherwise, an error of unimplemented .nop directive will be issued whenever .nop directive is used. * NEWS: Mention .nop directive. * as.h (_relax_state): Add rs_space_nop and rs_fill_nop. * read.c (potable): Add .nop. (s_nop): New function. * read.h (s_nop): New prototype. * write.c (cvt_frag_to_fill): Handle rs_space_nop and rs_fill_nop. (md_generate_nops): New function. (relax_segment): Likewise. (write_contents): Use md_generate_nops for rs_fill_nop. * config/tc-i386.c (alt64_11): New. (alt64_patt): Likewise. (md_convert_frag): Handle rs_space_nop. (i386_output_nops): New function. (i386_generate_nops): Likewise. (i386_align_code): Call i386_output_nops. * config/tc-i386.h (i386_generate_nops): New. (md_generate_nops): Likewise. * doc/as.texinfo: Document .nop directive. * testsuite/gas/i386/i386.exp: Run .nop directive tests. * testsuite/gas/i386/nop-1.d: New file. * testsuite/gas/i386/nop-1.s: Likewise. * testsuite/gas/i386/nop-2.d: Likewise. * testsuite/gas/i386/nop-2.s: Likewise. * testsuite/gas/i386/nop-3.d: Likewise. * testsuite/gas/i386/nop-3.s: Likewise. * testsuite/gas/i386/nop-4.d: Likewise. * testsuite/gas/i386/nop-4.s: Likewise. * testsuite/gas/i386/nop-5.d: Likewise. * testsuite/gas/i386/nop-5.s: Likewise. * testsuite/gas/i386/nop-6.d: Likewise. * testsuite/gas/i386/nop-6.s: Likewise. * testsuite/gas/i386/nop-bad-1.l: Likewise. * testsuite/gas/i386/nop-bad-1.s: Likewise. * testsuite/gas/i386/x86-64-nop-1.d: Likewise. * testsuite/gas/i386/x86-64-nop-2.d: Likewise. * testsuite/gas/i386/x86-64-nop-3.d: Likewise. * testsuite/gas/i386/x86-64-nop-4.d: Likewise. * testsuite/gas/i386/x86-64-nop-5.d: Likewise. * testsuite/gas/i386/x86-64-nop-6.d: Likewise.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-3/+3
2017-12-04Documentation fixAlan Modra1-1/+1
PR 22544 * doc/as.texinfo (8byte): Correct.
2017-12-01Update and clean up RISC-V gas documentation.Jim Wilson1-15/+16
gas/ * doc/as.texinfo (RISC-V): Alphabetize RISC-V entries. Change RISC-V-Opts to RISC-V-Options. Delete redundant space. Add -fpic and related options to option list. * doc/c-riscv.texi: (RISC-V-Options): Renamed from RISC-V-Opts. (RISC-V Options): Renamed from Options. Add missing period. (-fpic): Also mention -fPIC. (RISC-V Directives): New node.
2017-11-22Update docs on filling text with nops.Jim Wilson1-3/+3
gas/ * doc/as.texinfo (.align): Change some to most for text nop fill. (.balign, .p2align): Likewise.
2017-10-20Improve handling of REPT pseudo op with a negative count.Nick Clifton1-0/+3
PR 22324 * read.c (s_rept): Use size_t type for count parameter. (do_repeat): Change type of count parameter to size_t. Issue an error is the count parameter is negative. (do_repeat_with_expression): Likewise. * read.h: Update prototypes for do_repeat and do_repeat_with_expression. * doc/as.texinfo (Rept): Document that a zero count is allowed but negative counts are not. * config/tc-rx.c (rx_rept): Use size_t type for count parameter. * config/tc-tic54x.c (tic54x_loop): Cast count parameter to size_t type. * testsuite/gas/macros/end.s: Add a test using a negative repeat count. * testsuite/gas/macros/end.l: Add expected error message.
2017-08-24[PowerPC VLE] Add SPE2 and EFS2 instructions supportAlexander Fedotov1-1/+1
include/ * opcode/ppc.h: (spe2_opcodes, spe2_num_opcodes): New. (PPC_OPCODE_SPE2): New define. (PPC_OPCODE_EFS2): Likewise. (SPE2_XOP): Likewise. (SPE2_XOP_TO_SEG): Likewise. opcodes/ * ppc-dis.c (ppc_mopt): Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "e200z4" entry. New entries efs2 and spe2. Add PPC_OPCODE_SPE2 and PPC_OPCODE_EFS2 flag to "vle" entry. (SPE2_OPCD_SEGS): New macro. (spe2_opcd_indices): New. (disassemble_init_powerpc): Handle SPE2 opcodes. (lookup_spe2): New function. (print_insn_powerpc): call lookup_spe2. * ppc-opc.c (insert_evuimm1_ex0): New function. (extract_evuimm1_ex0): Likewise. (insert_evuimm_lt8): Likewise. (extract_evuimm_lt8): Likewise. (insert_off_spe2): Likewise. (extract_off_spe2): Likewise. (insert_Ddd): Likewise. (extract_Ddd): Likewise. (DD): New operand. (EVUIMM_LT8): Likewise. (EVUIMM_LT16): Adjust. (MMMM): New operand. (EVUIMM_1): Likewise. (EVUIMM_1_EX0): Likewise. (EVUIMM_2): Adjust. (NNN): New operand. (VX_OFF_SPE2): Likewise. (BBB): Likewise. (DDD): Likewise. (VX_MASK_DDD): New mask. (HH): New operand. (VX_RA_CONST): New macro. (VX_RA_CONST_MASK): Likewise. (VX_RB_CONST): Likewise. (VX_RB_CONST_MASK): Likewise. (VX_OFF_SPE2_MASK): Likewise. (VX_SPE_CRFD): Likewise. (VX_SPE_CRFD_MASK VX): Likewise. (VX_SPE2_CLR): Likewise. (VX_SPE2_CLR_MASK): Likewise. (VX_SPE2_SPLATB): Likewise. (VX_SPE2_SPLATB_MASK): Likewise. (VX_SPE2_OCTET): Likewise. (VX_SPE2_OCTET_MASK): Likewise. (VX_SPE2_DDHH): Likewise. (VX_SPE2_DDHH_MASK): Likewise. (VX_SPE2_HH): Likewise. (VX_SPE2_HH_MASK): Likewise. (VX_SPE2_EVMAR): Likewise. (VX_SPE2_EVMAR_MASK): Likewise. (PPCSPE2): Likewise. (PPCEFS2): Likewise. (vle_opcodes): Add EFS2 and some missing SPE opcodes. (powerpc_macros): Map old SPE instructions have new names with the same opcodes. Add SPE2 instructions which just are mapped to SPE2. (spe2_opcodes): Add SPE2 opcodes. gas/ * config/tc-ppc.c: (md_parse_option): Add mspe2 switch. (md_show_usage): Document -mspe2. (ppc_setup_opcodes): Handle spe2_opcodes. * doc/as.texinfo: Document -mspe2. * doc/c-ppc.texi: Likewise. * testsuite/gas/ppc/efs.d: New file. * testsuite/gas/ppc/efs.s: Likewise. * testsuite/gas/ppc/efs2.d: Likewise. * testsuite/gas/ppc/efs2.s: Likewise. * testsuite/gas/ppc/ppc.exp: Run new tests. * testsuite/gas/ppc/spe.d: New file. * testsuite/gas/ppc/spe.s: Likewise. * testsuite/gas/ppc/spe2-checks.d: Likewise. * testsuite/gas/ppc/spe2-checks.l: Likewise. * testsuite/gas/ppc/spe2-checks.s: Likewise. * testsuite/gas/ppc/spe2.d: Likewise. * testsuite/gas/ppc/spe2.s: Likewise. * testsuite/gas/ppc/spe_ambiguous.d: Likewise. * testsuite/gas/ppc/spe_ambiguous.s: Likewise.
2017-07-21This patch introduces support for specifing views in .loc directives, so ↵Alexandre Oliva1-0/+13
that the compiler can use the assembler to generate line number information and have the assembler determine view numbers to multiple views at the same program counter. binutils* dwarf.c (struct State_Machine_Registers): Add view field. (reset_state_machine): Reset view. (process_extended_line_op): Reset view when appropriate. (display_debug_lines_raw): Increment or reset view when appropriate. Print nonzero views. Support print view resets, disabled by default. (display_debug_lines_decoded): Likewise. Disambiguate op_code tests, enabling printing of end_sequence. * testsuite/binutils-all/dw2-1.W: Add nonzero views. * testsuite/binutils-all/dw2-3.W: Likewise. * testsuite/binutils-all/dw2-3gabi.W: Likewise. * testsuite/binutils-all/dw5.W: Add end sequence lines. * testsuite/binutils-all/i386/compressed-1a.d: Add nonzero views. * testsuite/binutils-all/libdw2-compressedgabi.out: Likewise. * testsuite/binutils-all/objdump.W: Likewise. * testsuite/binutils-all/objdump.WL: Add end sequence lines. * testsuite/binutils-all/x86-64/compressed-1a.d: Add nonzero views. gas * doc/as.texinfo (.loc): Document view support. * dwarf2dbg.c (unused): Check offset of next in struct line_entry. (current): Initialize view. (force_reset_view, view_assert_failed): New variables. (reverse_line_entry_list): New function. (set_or_check_view): Likewise. (dwarf2_gen_line_info_1): Call it. (dwarf2_where): Set view to NULL. (dwarf2_emit_insn): Return early when called before first file. (dwarf2_directive_loc): Add view support. Emit insn immediately when view option is given. (process_entries): Avoid set_address to reset view when a known address change already implies the view reset. (dwarf2dbg_final_check): New function. * dwarf2dbg.h (struct dwarf2_line_info): Add view. (dwarf2dbg_final_check): Declare. * read.c (s_leb128): Parse expression as deferred. * testsuite/gas/all/gas.exp: Run sleb128-9. * testsuite/gas/all/sleb128-9.d: New. * testsuite/gas/all/sleb128-9.l: New. * testsuite/gas/all/sleb128-9.s: New. * testsuite/gas/elf/dwarf2-1.d: Add nonzero views. * testsuite/gas/elf/dwarf2-2.d: Likewise. * testsuite/gas/elf/dwarf2-5.d: New. * testsuite/gas/elf/dwarf2-5.s: New. * testsuite/gas/elf/dwarf2-6.d: New. * testsuite/gas/elf/dwarf2-6.s: New. * testsuite/gas/elf/dwarf2-7.d: New. * testsuite/gas/elf/dwarf2-7.s: New. * testsuite/gas/elf/dwarf2-8.d: New. * testsuite/gas/elf/dwarf2-8.l: New. * testsuite/gas/elf/dwarf2-8.s: New. * testsuite/gas/elf/dwarf2-9.d: New. * testsuite/gas/elf/dwarf2-9.l: New. * testsuite/gas/elf/dwarf2-9.s: New. * testsuite/gas/elf/dwarf2-10.d: New. * testsuite/gas/elf/dwarf2-10.l: New. * testsuite/gas/elf/dwarf2-10.s: New. * testsuite/gas/elf/dwarf2-11.d: New. * testsuite/gas/elf/dwarf2-11.s: New. * testsuite/gas/elf/dwarf2-12.d: New. * testsuite/gas/elf/dwarf2-12.s: New. * testsuite/gas/elf/dwarf2-13.d: New. * testsuite/gas/elf/dwarf2-13.s: New. * testsuite/gas/elf/dwarf2-14.d: New. * testsuite/gas/elf/dwarf2-14.s: New. * testsuite/gas/elf/dwarf2-15.d: New. * testsuite/gas/elf/dwarf2-15.s: New. * testsuite/gas/elf/dwarf2-16.d: New. * testsuite/gas/elf/dwarf2-16.s: New. * testsuite/gas/elf/dwarf2-17.d: New. * testsuite/gas/elf/dwarf2-17.s: New. * testsuite/gas/elf/dwarf2-18.d: New. * testsuite/gas/elf/dwarf2-18.s: New. * testsuite/gas/elf/elf.exp: Run dwarf2-5..18 tests. * testsuite/gas/i386/dw2-compress-1.d: Add nonzero views. * testsuite/gas/i386/dw2-compressed-1.d: Likewise. * testsuite/gas/i386/ilp32/lns/lns-duplicate.d: Likewise. * testsuite/gas/lns/lns-big-delta.d: Likewise. * testsuite/gas/lns/lns-duplicate.d: Likewise. * testsuite/gas/mips/loc-swap-2.d: Likewise. * testsuite/gas/mips/loc-swap-3.d: Likewise. * testsuite/gas/mips/loc-swap.d: Likewise. * testsuite/gas/mips/micromips@loc-swap-2.d: Likewise. * testsuite/gas/mips/micromips@loc-swap.d: Likewise. * testsuite/gas/mips/mips16@loc-swap-2.d: Likewise. * testsuite/gas/mips/mips16@loc-swap.d: Likewise. * testsuite/gas/mips/mips16e@loc-swap.d: Likewise. * write.c (write_object_file): Check pending view asserts. (cvt_frag_to_fill): Complain about undefined leb128 operand.
2017-07-21S/390: Support z14 as CPU name.Andreas Krebbel1-1/+1
With IBM z14 officially announced I can add z14 as CPU name. No regressions with that patch on s390x. gas/ChangeLog: 2017-07-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * config/tc-s390.c (s390_parse_cpu): Add z14 as alternate CPU name. * doc/as.texinfo: Add z14 to CPU string list. * doc/c-s390.texi: Likewise. opcodes/ChangeLog: 2017-07-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * s390-mkopc.c (main): Enable z14 as CPU string in the opcode table.
2017-05-15MIPS16e2: Add MIPS16e2 ASE supportMaciej W. Rozycki1-0/+7
Add MIPS16e2 ASE support as per the architecture specification[1], including in particular: 1. A new ELF ASE flag to mark MIPS16e2 binaries. 2. MIPS16e2 instruction assembly support, including a relaxation update to use LUI rather than an LI/SLL instruction pair for loading the high part of 32-bit addresses. 3. MIPS16e2 instruction disassembly support, including updated rules for extended forms of instructions that are now subdecoded and therefore do not alias to the original MIPS16 ISA revision instructions even for encodings that are not valid in the MIPS16e2 instruction set. Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and `.module' pseudo-ops. Control the availability of the MT ASE subset of the MIPS16e2 instruction set with a combination of these controls and the preexisting MT ASE controls. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific Extension Technical Reference Manual", Imagination Technologies Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016 include/ * elf/mips.h (AFL_ASE_MIPS16E2): New macro. (AFL_ASE_MASK): Adjust accordingly. * opcode/mips.h: Document new operand codes defined. (mips_operand_type): Add OP_REG28 enum value. (INSN2_SHORT_ONLY): Update description. (ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros. bfd/ * elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry. (mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag. (print_insn_arg) <OP_REG28>: Add handler. (validate_insn_args) <OP_REG28>: Handle. (print_mips16_insn_arg): Handle MIPS16 instructions that require 32-bit encoding and 9-bit immediates. (print_insn_mips16): Handle MIPS16 instructions that require 32-bit encoding and MFC0/MTC0 operand decoding. * mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'> <'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers. (RD_C0, WR_C0, E2, E2MT): New macros. (mips16_opcodes): Add entries for MIPS16e2 instructions: GP-relative "addiu" and its "addu" spelling, "andi", "cache", "di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh", "lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0", "movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause", "pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw" instructions, "swl", "swr", "sync" and its "sync_acquire", "sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases, "xori", "dmt", "dvpe", "emt" and "evpe". Add split regular/extended entries for original MIPS16 ISA revision instructions whose extended forms are subdecoded in the MIPS16e2 ISA revision: "li", "sll" and "srl". binutils/ * readelf.c (print_mips_ases): Handle MIPS16e2 ASE. * NEWS: Mention MIPS16e2 ASE support. gas/ * config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag. (RELAX_MIPS16_E2): New macro. (RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO) (RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT) (RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT) (RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED) (RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED) (RELAX_MIPS16_MARK_ALWAYS_EXTENDED) (RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO) (RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits. (mips16_immed_extend): New prototype. (options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum values. (md_longopts): Add "mmips16e2" and "mno-mips16e2" options. (mips_ases): Add "mips16e2" entry. (mips_set_ase): Handle MIPS16e2 ASE. (insn_insert_operand): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (is_opcode_valid_16): Pass enabled ASE bitmask on to `opcode_is_member'. (validate_mips_insn): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (operand_reg_mask) <OP_REG28>: Add handler. (match_reg28_operand): New function. (match_operand) <OP_REG28>: Add handler. (append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE. (match_mips16_insn): Handle MIPS16 instructions that require 32-bit encoding and `V' and `u' operand codes. (mips16_ip): Allow any characters except from `.' in opcodes. (mips16_immed_extend): Handle 9-bit immediates. Do not shuffle immediates whose width is not one of these listed. (md_estimate_size_before_relax): Handle MIPS16e2 relaxation. (mips_relax_frag): Likewise. (md_convert_frag): Likewise. (mips_convert_ase_flags): Handle MIPS16e2 ASE. * doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and `-mno-mips16e2' options. (-mmips16e2, -mno-mips16e2): New options. * doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and `-mno-mips16e2' options. (MIPS ASE Instruction Generation Overrides): Add `.set mips16e2' and `.set nomips16e2'.
2017-05-15MIPS/GAS/doc: Refer to `.module' rather than `.set'Maciej W. Rozycki1-7/+7
Complement commit 919731affbef ("Add MIPS .module directive") and update the GAS manual to refer to the `.module' rather than `.set' directive in command-line option descriptions, following an observation that unlike `.set' and like the respective command-line option the use of the `.module' directive affects the ISA and ASE flags recorded in the object file produced, and therefore it is `.module' rather than `.set' that corresponds to the respective command-line option. gas/ * doc/as.texinfo (-mips16, -no-mips16): Refer to `.module mips16' rather than `.set mips16'. (-mmicromips, -mno-micromips): Refer to `.module micromips' and `.module nomicromips' rather than `.set micromips' and `.set nomicromips'. (-msmartmips, -mno-smartmips): Refer to `.module smartmips' rather than `.set smartmips'. * doc/c-mips.texi (MIPS Options): Refer to `.module mips16', `.module micromips', `.module nomicromips' and `.module smartmips' rather than `.set mips16', `.set micromips', `.set nomicromips' and `.set smartmips' respectively.
2017-04-04Support ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXXH.J. Lu1-0/+2
Mark an ALLOC section, which should be placed in special memory area, with SHF_GNU_MBIND. Its sh_info field indicates the special memory type. GNU_MBIND section names start with ".mbind" so that they are placed as orphan sections by linker. All input GNU_MBIND sections with the same sh_type, sh_flags and sh_info are placed in one output GNU_MBIND section. In executable and shared object, create a GNU_MBIND segment for each GNU_MBIND section and its segment type is PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is aligned at page boundary. The assembler syntax: .section .mbind.foo,"adx",%progbits ^ 0: Special memory type. | 'd' for SHF_GNU_MBIND. .section .mbind.foo,"adx",%progbits,0x1 ^ 1: Special memory type. | 'd' for SHF_GNU_MBIND. .section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2 ^ 2: Special memory type. | 'd' for SHF_GNU_MBIND. bfd/ * elf.c (get_program_header_size): Add a GNU_MBIND segment for each GNU_MBIND section and align GNU_MBIND section to page size. (_bfd_elf_map_sections_to_segments): Create a GNU_MBIND segment for each GNU_MBIND section. (_bfd_elf_init_private_section_data): Copy sh_info from input for GNU_MBIND section. binutils/ * NEWS: Mention support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX. (get_elf_section_flags): Handle SHF_GNU_MBIND. (process_section_headers): Likewise. * testsuite/binutils-all/mbind1.s: New file. * testsuite/binutils-all/objcopy.exp: Run readelf test on mbind1.s. gas/ * NEWS: Mention support for ELF SHF_GNU_MBIND. * config/obj-elf.c (section_match): New. (get_section): Match both sh_info and group name. (obj_elf_change_section): Add argument for sh_info. Pass both sh_info and group name to get_section. Issue an error for SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info. (obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'. (obj_elf_section): Support SHF_GNU_MBIND section info. * config/obj-elf.h (obj_elf_change_section): Add argument for sh_info. * config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to obj_elf_change_section. * config/tc-ia64.c (obj_elf_vms_common): Likewise. * config/tc-microblaze.c (microblaze_s_data): Likewise. (microblaze_s_sdata): Likewise. (microblaze_s_rdata): Likewise. (microblaze_s_bss): Likewise. * config/tc-mips.c (s_change_section): Likewise. * config/tc-msp430.c (msp430_profiler): Likewise. * config/tc-rx.c (parse_rx_section): Likewise. * config/tc-tic6x.c (tic6x_start_unwind_section): Likewise. * doc/as.texinfo: Document 'd' for SHF_GNU_MBIND. * testsuite/gas/elf/elf.exp: Run section12a, section12b and section13. * testsuite/gas/elf/section10.d: Updated. * testsuite/gas/elf/section10.s: Likewise. * testsuite/gas/elf/section12.s: New file. * testsuite/gas/elf/section12a.d: Likewise. * testsuite/gas/elf/section12b.d: Likewise. * testsuite/gas/elf/section13.l: Likewise. * testsuite/gas/elf/section13.d: Likewise. * testsuite/gas/elf/section13.s: Likewise. include/ * elf/common.h (PT_GNU_MBIND_NUM): New. (PT_GNU_MBIND_LO): Likewise. (PT_GNU_MBIND_HI): Likewise. (SHF_GNU_MBIND): Likewise. ld/ * NEWS: Mention support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place input GNU_MBIND sections with the same type, attributes and sh_info field into a single output GNU_MBIND section. * testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b. * testsuite/ld-elf/mbind1.s: New file. * testsuite/ld-elf/mbind1a.d: Likewise. * testsuite/ld-elf/mbind1b.d: Likewise. * testsuite/ld-elf/mbind1c.d: Likewise. * testsuite/ld-elf/mbind2a.s: Likewise. * testsuite/ld-elf/mbind2b.c: Likewise.
2017-03-30Add support for the WebAssembly file format and the wasm32 ELF conversion to ↵Pip Cet1-1/+8
gas and the binutils. binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_none_reloc_): Likewise. * NEWS: Mention the new support. * testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32 as ELF target. (supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE. * testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations. * testsuite/binutils-all/wasm32: New directory. * testsuite/binutils-all/wasm32/create-wasm.d: New file. * testsuite/binutils-all/wasm32/create-wasm.s: Likewise. * testsuite/binutils-all/wasm32/custom-section.d: Likewise. * testsuite/binutils-all/wasm32/custom-section.s: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise. * testsuite/binutils-all/wasm32/long-sections.d: Likewise. * testsuite/binutils-all/wasm32/long-sections.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise. * testsuite/binutils-all/wasm32/prepared-section.d: Likewise. * testsuite/binutils-all/wasm32/prepared-section.s: Likewise. * testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests. gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target. * config/tc-wasm32.c: New file: Add WebAssembly assembler target. * Makefile.am: Add WebAssembly assembler target. * configure.tgt: Add WebAssembly assembler target. * doc/c-wasm32.texi: New file: Start documenting WebAssembly assembler. * doc/all.texi: Define WASM32. * doc/as.texinfo: Add WebAssembly entries. * NEWS: Mention the new support. * Makefile.in: Regenerate. * po/gas.pot: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/wasm32: New directory. * testsuite/gas/wasm32/allinsn.d: New file. * testsuite/gas/wasm32/allinsn.s: New file. * testsuite/gas/wasm32/illegal.l: New file. * testsuite/gas/wasm32/illegal.s: New file. * testsuite/gas/wasm32/illegal-2.l: New file. * testsuite/gas/wasm32/illegal-2.s: New file. * testsuite/gas/wasm32/illegal-3.l: New file. * testsuite/gas/wasm32/illegal-3.s: New file. * testsuite/gas/wasm32/illegal-4.l: New file. * testsuite/gas/wasm32/illegal-4.s: New file. * testsuite/gas/wasm32/illegal-5.l: New file. * testsuite/gas/wasm32/illegal-5.s: New file. * testsuite/gas/wasm32/illegal-6.l: New file. * testsuite/gas/wasm32/illegal-6.s: New file. * testsuite/gas/wasm32/illegal-7.l: New file. * testsuite/gas/wasm32/illegal-7.s: New file. * testsuite/gas/wasm32/illegal-8.l: New file. * testsuite/gas/wasm32/illegal-8.s: New file. * testsuite/gas/wasm32/illegal-9.l: New file. * testsuite/gas/wasm32/illegal-9.s: New file. * testsuite/gas/wasm32/illegal-10.l: New file. * testsuite/gas/wasm32/illegal-10.s: New file. * testsuite/gas/wasm32/illegal-11.l: New file. * testsuite/gas/wasm32/illegal-11.s: New file. * testsuite/gas/wasm32/illegal-12.l: New file. * testsuite/gas/wasm32/illegal-12.s: New file. * testsuite/gas/wasm32/illegal-13.l: New file. * testsuite/gas/wasm32/illegal-13.s: New file. * testsuite/gas/wasm32/illegal-14.l: New file. * testsuite/gas/wasm32/illegal-14.s: New file. * testsuite/gas/wasm32/illegal-15.l: New file. * testsuite/gas/wasm32/illegal-15.s: New file. * testsuite/gas/wasm32/illegal-16.l: New file. * testsuite/gas/wasm32/illegal-16.s: New file. * testsuite/gas/wasm32/illegal-17.l: New file. * testsuite/gas/wasm32/illegal-17.s: New file. * testsuite/gas/wasm32/illegal-18.l: New file. * testsuite/gas/wasm32/illegal-18.s: New file. * testsuite/gas/wasm32/illegal-19.l: New file. * testsuite/gas/wasm32/illegal-19.s: New file. * testsuite/gas/wasm32/illegal-20.l: New file. * testsuite/gas/wasm32/illegal-20.s: New file. * testsuite/gas/wasm32/illegal-21.l: New file. * testsuite/gas/wasm32/illegal-21.s: New file. * testsuite/gas/wasm32/illegal-22.l: New file. * testsuite/gas/wasm32/illegal-22.s: New file. * testsuite/gas/wasm32/illegal-24.l: New file. * testsuite/gas/wasm32/illegal-24.s: New file. * testsuite/gas/wasm32/illegal-25.l: New file. * testsuite/gas/wasm32/illegal-25.s: New file. * testsuite/gas/wasm32/reloc.d: New file. * testsuite/gas/wasm32/reloc.s: New file. * testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly architecture. opcodes * configure.ac: Add (empty) bfd_wasm32_arch target. * configure: Regenerate * po/opcodes.pot: Regenerate. include * opcode/wasm.h: New file to support wasm32 architecture. * elf/wasm32.h: Add R_WASM32_32 relocation. bfd * elf32-wasm32.c: Add relocation code, two relocs. * reloc.c: Add wasm32 relocations. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. * bfd/po/bfd.pot: Regenerate.
2017-03-20Update descriptions of the .2byte, .4byte and .8byte directives.Nick Clifton1-14/+18
* doc/as.texinfo (2byte): Note that if no expressions are present the directive does nothing. Emphasize that the output is unaligned, and that this can have an effect on the relocations generated. (4byte): Simplify description. Refer back to the 2byte description. (8byte): Likewise.
2017-03-10Document that the .2byte and .4byte directives warn about overlarge values.Nick Clifton1-10/+15
* doc/as.texinfo (2byte): Tidy up wording. Add note that overlarge values will produce a warning message and be trunacted. (4byte): Likewise.
2017-03-07Correct @section placement for makeinfo 4.13Alan Modra1-3/+3
* doc/as.texinfo (2byte, 4byte, 8byte): Correct @section placement.
2017-03-07Document .Nbyte assembler directivesAlan Modra1-0/+38
* doc/as.texinfo (2byte, 4byte, 8byte): Document. * doc/c-arm.texi (2byte, 4byte, 8byte): Omit if ELF.
2017-02-23S/390: Add support for new cpu architecture - arch12.Andreas Krebbel1-1/+1
This adds support of new instructions to the S/390 specific parts. The important feature of the new instruction set is the support of single and extended precision floating point vector operations. Note: arch12 is NOT the official name of the new CPU. It just continues the series of archXX options supported as alternate names. The archXX terminology refers to the edition number of the Principle of Operations manual. The official CPU name will be added later while keeping support of the arch12 for backwards compatibility. No testsuite regressions. Committed to mainline. Bye, -Andreas- opcodes/ChangeLog: 2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * s390-mkopc.c (main): Accept arch12 as cpu string and vx2 as facility. * s390-opc.c: Add new operand description macros, new instruction types, instruction masks, and new .insn instruction types. * s390-opc.txt: Add new arch12 instructions. include/ChangeLog: 2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * opcode/s390.h (enum s390_opcode_cpu_val): New value S390_OPCODE_ARCH12. (S390_INSTR_FLAG_VX2): New macro definition. gas/ChangeLog: 2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * config/tc-s390.c (s390_parse_cpu): New entry for arch12. * doc/as.texinfo: Document arch12 as cpu type. * doc/c-s390.texi: Likewise. * testsuite/gas/s390/s390.exp: Run arch12 specific tests. * testsuite/gas/s390/zarch-arch12.d: New test. * testsuite/gas/s390/zarch-arch12.s: New test. * testsuite/gas/s390/zarch-z13.d: Rename some mnemonics in the output patterns.
2017-02-02MIPS/GAS/doc: Include MIPS options in the man pageMaciej W. Rozycki1-0/+2
Include the detailed MIPS option description in the man page along with other target descriptions and complementing the terse list earlier on. gas/ * doc/as.texinfo (Overview): Select MIPS options for man page inclusion.
2017-01-30MIPS: Add options to control branch ISA checksMaciej W. Rozycki1-0/+12
Complement commit 9d862524f6ae ("MIPS: Verify the ISA mode and alignment of branch and jump targets") and add GAS and LD options to control the checks for invalid branches between ISA modes introduced there, to help with some handwritten code lacking `.insn' annotation for labels used as branch targets and code produced by older versions of GCC which suffers from the issue with branches to code that has been optimized away, addressed with GCC commit 242424 ("MIPS/GCC: Mark trailing labels with `.insn'"), <https://gcc.gnu.org/ml/gcc-patches/2016-11/msg01061.html>. bfd/ * elfxx-mips.h (_bfd_mips_elf_insn32): Rename prototype to... (_bfd_mips_elf_linker_flags): ... this. Add another parameter. * elfxx-mips.c (mips_elf_link_hash_table): Add `ignore_branch_isa' member. (mips_elf_perform_relocation): Do not treat an ISA mode mismatch in branch relocation calculation as an error if `ignore_branch_isa' has been set. (_bfd_mips_elf_insn32): Rename to... (_bfd_mips_elf_linker_flags): ... this. Rename the `on' parameter to `insn32' and add an `ignore_branch_isa' parameter. Handle the new parameter. gas/ * config/tc-mips.c (mips_ignore_branch_isa): New variable. (options): Add OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA enum values. (md_longopts): Add "mignore-branch-isa" and "mno-ignore-branch-isa" options. (md_parse_option): Handle OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA. (fix_bad_cross_mode_branch_p): Return FALSE if `mips_ignore_branch_isa' has been set. (md_show_usage): Add `-mignore-branch-isa' and `-mno-ignore-branch-isa'. * doc/as.texinfo (Target MIPS options): Add `-mignore-branch-isa' and `-mno-ignore-branch-isa' options. (-mignore-branch-isa, -mno-ignore-branch-isa): New options. * doc/c-mips.texi (MIPS Options): Add `-mignore-branch-isa' and `-mno-ignore-branch-isa' options. * testsuite/gas/mips/branch-local-ignore-2.d: New test. * testsuite/gas/mips/branch-local-ignore-3.d: New test. * testsuite/gas/mips/branch-local-ignore-n32-2.d: New test. * testsuite/gas/mips/branch-local-ignore-n32-3.d: New test. * testsuite/gas/mips/branch-local-ignore-n64-2.d: New test. * testsuite/gas/mips/branch-local-ignore-n64-3.d: New test. * testsuite/gas/mips/mips.exp: Run the new tests. ld/ * emultempl/mipself.em (ignore_branch_isa): New variable. (mips_create_output_section_statements): Rename `_bfd_mips_elf_insn32' called to `_bfd_mips_elf_linker_flags', add `ignore_branch_isa' argument. (PARSE_AND_LIST_PROLOGUE): Add OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA enum values. (PARSE_AND_LIST_LONGOPTS): Add "ignore-branch-isa" and "no-ignore-branch-isa" options. (PARSE_AND_LIST_OPTIONS): Add `--ignore-branch-isa' and `--no-ignore-branch-isa'. (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_IGNORE_BRANCH_ISA and OPTION_NO_IGNORE_BRANCH_ISA. * ld.texinfo (Options specific to MIPS targets): Add `--ignore-branch-isa' and `--no-ignore-branch-isa' options. (ld and the MIPS family): Likewise. * testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: New test. * testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: New test. * testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-2.d: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-mips16: New test. * testsuite/ld-mips-elf/unaligned-branch-ignore-micromips: New test. * testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
2017-01-23Fix spelling mistakes and typos in the GAS sources.Nick Clifton1-5/+5
PR gas/21072 * asintl.h: Fix spelling mistakes and typos. * atof-generic.c: Likewise. * bit_fix.h: Likewise. * config/atof-ieee.c: Likewise. * config/bfin-defs.h: Likewise. * config/bfin-parse.y: Likewise. * config/obj-coff-seh.h: Likewise. * config/obj-coff.c: Likewise. * config/obj-evax.c: Likewise. * config/obj-macho.c: Likewise. * config/rx-parse.y: Likewise. * config/tc-aarch64.c: Likewise. * config/tc-alpha.c: Likewise. * config/tc-arc.c: Likewise. * config/tc-arm.c: Likewise. * config/tc-avr.c: Likewise. * config/tc-bfin.c: Likewise. * config/tc-cr16.c: Likewise. * config/tc-cris.c: Likewise. * config/tc-crx.c: Likewise. * config/tc-d10v.c: Likewise. * config/tc-d30v.c: Likewise. * config/tc-dlx.c: Likewise. * config/tc-epiphany.c: Likewise. * config/tc-frv.c: Likewise. * config/tc-hppa.c: Likewise. * config/tc-i370.c: Likewise. * config/tc-i386-intel.c: Likewise. * config/tc-i386.c: Likewise. * config/tc-i960.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-m32r.c: Likewise. * config/tc-m68hc11.c: Likewise. * config/tc-m68k.c: Likewise. * config/tc-mcore.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-mep.h: Likewise. * config/tc-metag.c: Likewise. * config/tc-microblaze.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-mmix.c: Likewise. * config/tc-mn10200.c: Likewise. * config/tc-mn10300.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-msp430.h: Likewise. * config/tc-nds32.c: Likewise. * config/tc-nds32.h: Likewise. * config/tc-nios2.c: Likewise. * config/tc-nios2.h: Likewise. * config/tc-ns32k.c: Likewise. * config/tc-pdp11.c: Likewise. * config/tc-ppc.c: Likewise. * config/tc-pru.c: Likewise. * config/tc-rx.c: Likewise. * config/tc-s390.c: Likewise. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sh.c: Likewise. * config/tc-sh64.c: Likewise. * config/tc-sparc.c: Likewise. * config/tc-tic4x.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-v850.c: Likewise. * config/tc-vax.c: Likewise. * config/tc-visium.c: Likewise. * config/tc-xgate.c: Likewise. * config/tc-xtensa.c: Likewise. * config/tc-z80.c: Likewise. * config/tc-z8k.c: Likewise. * config/te-vms.c: Likewise. * config/xtensa-relax.c: Likewise. * doc/as.texinfo: Likewise. * doc/c-arm.texi: Likewise. * doc/c-hppa.texi: Likewise. * doc/c-i370.texi: Likewise. * doc/c-i386.texi: Likewise. * doc/c-m32r.texi: Likewise. * doc/c-m68k.texi: Likewise. * doc/c-mmix.texi: Likewise. * doc/c-msp430.texi: Likewise. * doc/c-nds32.texi: Likewise. * doc/c-ns32k.texi: Likewise. * doc/c-riscv.texi: Likewise. * doc/c-rx.texi: Likewise. * doc/c-s390.texi: Likewise. * doc/c-tic6x.texi: Likewise. * doc/c-tilegx.texi: Likewise. * doc/c-tilepro.texi: Likewise. * doc/c-v850.texi: Likewise. * doc/c-xgate.texi: Likewise. * doc/c-xtensa.texi: Likewise. * dwarf2dbg.c: Likewise. * ecoff.c: Likewise. * itbl-ops.c: Likewise. * listing.c: Likewise. * macro.c: Likewise. * po/gas.pot: Likewise. * read.c: Likewise. * struc-symbol.h: Likewise. * symbols.h: Likewise. * testsuite/gas/arc/relocs-errors.err: Likewise. * write.c: Likewise.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-3/+3
2016-12-31PRU GAS PortDimitar Dimitrov1-0/+32
* NEWS: Mention new PRU target. * Makefile.am: Add PRU target. * config/obj-elf.c: Ditto. * configure.tgt: Ditto. * config/tc-pru.c: New file. * config/tc-pru.h: New file. * doc/Makefile.am: Add documentation for PRU GAS port. * doc/all.texi, Ditto. * doc/as.texinfo: Ditto. * doc/c-pru.texi: Document PRU GAS options. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/pru/alu.d: New file for PRU GAS testsuite. * testsuite/gas/pru/alu.s: Ditto. * testsuite/gas/pru/branch.d: Ditto. * testsuite/gas/pru/branch.s: Ditto. * testsuite/gas/pru/illegal.l: Ditto. * testsuite/gas/pru/illegal.s: Ditto. * testsuite/gas/pru/ldi.d: Ditto. * testsuite/gas/pru/ldi.s: Ditto. * testsuite/gas/pru/ldst.d: Ditto. * testsuite/gas/pru/ldst.s: Ditto. * testsuite/gas/pru/loop.d: Ditto. * testsuite/gas/pru/loop.s: Ditto. * testsuite/gas/pru/misc.d: Ditto. * testsuite/gas/pru/misc.s: Ditto. * testsuite/gas/pru/pru.exp: Ditto. * testsuite/gas/pru/pseudo.d: Ditto. * testsuite/gas/pru/pseudo.s: Ditto. * testsuite/gas/pru/warn_reglabel.l: Ditto. * testsuite/gas/pru/warn_reglabel.s: Ditto. * testsuite/gas/pru/xfr.d: Ditto. * testsuite/gas/pru/xfr.s: Ditto. * testsuite/gas/lns/lns.exp: Mark lns-common-1-alt variant for PRU. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2016-12-21Document character escape sequencesAlan Modra1-6/+7
PR gas/10946 * doc/as.texinfo (Chars): Document escape sequences.
2016-12-20Re-work RISC-V gas flags: now we just support -mabi and -marchAndrew Waterman1-3/+2
We've decided to standardize on two flags for RISC-V: "-march" sets the target architecture (which determines which instructions can be generated), and "-mabi" sets the target ABI. We needed to rework this because the old flag set didn't support soft-float or single-float ABIs, and didn't support an x32-style ABI on RISC-V. Additionally, we've changed the behavior of the -march flag: it's now a lot stricter and only parses things we can actually understand. Additionally, it's now lowercase-only: the rationale is that while the RISC-V ISA manual specifies that ISA strings are case-insensitive, in Linux-land things are usually case-sensitive. Since this flag can be used to determine library paths, we didn't want to bake some case-insensitivity in there that would case trouble later. This patch implements these two new flags and removes the old flags that could conflict with these. There wasn't a RISC-V release before, so we want to just support a clean flag set. include/ * elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define. (EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define. (EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define. (EF_RISCV_FLOAT_ABI_QUAD): Define. bfd/ * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT. binutils/ * readelf.c (get_machine_flags): Use EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of EF_RISCV_{SOFT,HARD}_FLOAT. gas/ * config/tc-riscv.h (xlen): Delete. * config/tc-riscv.c (xlen): Make static. (abi_xlen): New variable. (options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC} with OPTION_MABI. (md_longopts): Likewise. (md_parse_option): Likewise. (riscv_elf_final_processing): Likewise. * doc/as.texinfo (Target RISC-V options): Likewise. * doc/c-riscv.texi (OPTIONS): Likewise. * config/tc-riscv.c (float_mode): Removed. (float_abi): New type, specifies the floating-point ABI. (riscv_set_abi): New function. (riscv_add_subset): Only allow lower-case ISA names and require them to start with "rv". (riscv_after_parse_args): Likewise. opcodes/ * riscv-dis.c (riscv_disassemble_insn): Default to the ELF's XLEN when none is provided.
2016-11-04Update RISC-V documentation and make sure that it is included in the gas ↵Palmer Dabbelt1-0/+14
info file. * Makefile.am (CPU_DOCS): Add c-riscv.texi. * Makefile.in: Regenerate. * doc/all.texi: Set RISCV. * doc/as.texinfo: Add RISCV options. Add RISC-V-Dependent node. Include c-riscv.texi. * doc/c-riscv.texi: Rename RISC-V Options to RISC-V-Opts.
2016-11-01Add support for RISC-V architecture.Nick Clifton1-0/+19
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file.
2016-09-29Add .cfi_val_offset GAS command.Andreas Krebbel1-0/+3
This patch adds support for .cfi_val_offset GAS pseudo command which maps to DW_CFA_val_offset and DW_CFA_val_offset_sf. gas/ChangeLog: 2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * doc/as.texinfo: Add docu for .cfi_val_offset. * dw2gencfi.c (cfi_add_CFA_val_offset): New function. (dot_cfi): Add case for DW_CFA_val_offset. (output_cfi_insn): Likewise. (cfi_pseudo_table): Add entry for cfi_val_offset. * dw2gencfi.h: Add prototype for cfi_add_CFA_val_offset. * testsuite/gas/cfi/cfi-common-8.d: New test. * testsuite/gas/cfi/cfi-common-8.s: New test. * testsuite/gas/cfi/cfi.exp: Run cfi-common-8 testcase. binutils/ChangeLog: 2016-09-29 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * dwarf.c (display_debug_frames): Adjust output line.
2016-09-14gas: detect DCTI couples in sparcJose E. Marchesi1-3/+14
Before SPARC V9 the effect of having a delayed branch instruction in the delay slot of a conditional delayed branch was undefined. In SPARC V9 DCTI couples are well defined. However, starting with the UltraSPARC Architecture 2005, DCTI couples (of all kind) are deprecated and should not be used, as they may be slow or behave differently to what the programmer expects. This patch adds a new command line option --dcti-couples-detect to `as', disabled by default, that makes the assembler to warn the user if an unpredictable DCTI couple is found. Tests and documentation are included. gas/ChangeLog: 2016-09-14 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (md_assemble): Detect and warning on unpredictable DCTI couples in certain arches. (dcti_couples_detect): New global. (md_longopts): Add command line option -dcti-couples-detect. (md_show_usage): Document -dcti-couples-detect. (md_parse_option): Handle OPTION_DCTI_COUPLES_DETECT. * testsuite/gas/sparc/sparc.exp (gas_64_check): Run dcti-couples-v8, dcti-couples-v9 and dcti-couples-v9c tests. * testsuite/gas/sparc/dcti-couples.s: New file. * testsuite/gas/sparc/dcti-couples-v9c.d: Likewise. * testsuite/gas/sparc/dcti-couples-v8.d: Likewise. * testsuite/gas/sparc/dcti-couples-v9.d: Likewise. * testsuite/gas/sparc/dcti-couples-v9c.l: Likewise. * testsuite/gas/sparc/dcti-couples-v8.l: Likewise. * doc/as.texinfo (Overview): Document --dcti-couples-detect. * doc/c-sparc.texi (Sparc-Opts): Likewise.
2016-09-12S/390: Add alternate processor names.Andreas Krebbel1-3/+5
This patch adds alternate CPU names which adhere to the number of the architecture document. So instead of having z196, zEC12, and z13 you can use arch9, arch10, and arch11. The old cpu names stay valid and should primarily be used. The alternate names are supposed to improve compatibility with the IBM XL compiler toolchain which uses the arch numbering. opcodes/ChangeLog: 2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * s390-mkopc.c (main): Support alternate arch strings. gas/ChangeLog: 2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com> * config/tc-s390.c (s390_parse_cpu): Support alternate arch strings. * doc/as.texinfo: Document new arch strings. * doc/c-s390.texi: Likewise.
2016-06-27Add command line option to stop the assembler from padding the end of ↵Nick Clifton1-1/+17
sections to their alignment boundary. PR gas/20247 * as.h (do_not_pad_sections_to_alignment): New global variable. * as.c (show_usage): Add --no-pad-sections. (parse_args): Likewise. * write.c (size_seg): Skip padding the end of the section if requested from the command line. (SUB_SEGMENT_ALIGN): Likewise. * doc/as.texinfo: Document the new option. * NEWS: Mention the new feature. * testsuite/gas/elf/section11.s: New test. * testsuite/gas/elf/section11.d: New test driver. * testsuite/gas/elf/elf.exp: Run the new test.
2016-06-21Arc assembler: Convert nps400 from a machine type to an extension.Graham Markall1-1/+1
gas * config/tc-arc.c (check_cpu_feature, md_parse_option): Add nps400 option and feature. Add check for nps400 feature. Refactor existing checks to check subclass before feature enablement. (md_show_usage): Document flags for NPS-400 and add some other undocumented flags. (cpu_type): Remove nps400 CPU type entry (check_zol): Remove bfd_mach_arc_nps400 case. (md_show_usage): Add help on -mcpu=nps400. (cpu_types): Add entry for nps400 as arc700 plus nps400 extension set. * doc/c-arc.texi: Document the -mnps400, -mspfp, -mdpfp, and -fpuda flags. Document -mcpu=nps400. * testsuite/gas/arc/nps-400-0.d: Use -mcpu=arc700 -mnps400. Change expected flags to match ARC700 instead of NPS400. * testsuite/gas/arc/nps-400-1.d: Use -mcpu=arc700 -mnps400. * testsuite/gas/arc/nps-400-2.d: Likewise. * testsuite/gas/arc/nps-400-3.d: Likewise. * testsuite/gas/arc/nps-400-4.d: Likewise. * testsuite/gas/arc/nps-400-5.d: Likewise. * testsuite/gas/arc/nps-400-6.d: Likewise. * testsuite/gas/arc/nps-400-7.d: Likewise. * testsuite/gas/arc/textinsn2op01.s: Change opcode of myinsn to avoid clash with cbba instruction. * testsuite/gas/arc/textinsn2op01.d: Likewise. * testsuite/gas/arc/textinsn3op.d: Likewise. * testsuite/gas/arc/textinsn3op.s: Likewise. * testsuite/gas/arc/nps-400-0.d: Test using NPS-400 using -mcpu=nps400 as an alternative to -mcpu=arc700 -mnps400 flags. binutils* readelf.c (decode_ARC_machine_flags): Remove E_ARC_MACH_NPS400 case. ld * testsuite/ld-arc/nps-1a.d: Use -mcpu=arc700 -mnps400. * testsuite/ld-arc/nps-1b.d: Likewise. include * opcode/arc.h: Add nps400 extension and instruction subclass. Remove ARC_OPCODE_NPS400 * elf/arc.h: Remove E_ARC_MACH_NPS400 opcodes * arc-dis.c (arc_insn_length): Add comment on instruction length. Use same method for determining instruction length on ARC700 and NPS-400. (arc_insn_length, print_insn_arc): Remove bfd_mach_arc_nps400. * arc-nps400-tbl.h: Make all nps400 instructions ARC700 instructions with the NPS400 subclass. * arc-opc.c: Likewise. bfd * archures.c: Remove bfd_mach_arc_nps400. * bfd-in2.h: Likewise. * cpu-arc.c (arch_info_struct): Likewise. * elf32-arc.c (arc_elf_object_p, arc_elf_final_write_processing): Likewise.
2016-05-11Add MIPS32 DSPr3 support.Matthew Fortune1-1/+9
bfd/ * elfxx-mips.c (print_mips_ases): Add DSPR3. binutils/ * readelf.c (print_mips_ases): Add DSPR3. gas/ * config/tc-mips.c (options): Add OPTION_DSPR3 and OPTION_NO_DSPR3. (md_longopts): Likewise. (md_show_usage): Add help for -mdspr3 and -mno-dspr3. (mips_ases): Define availability for DSPr3. (mips_ase_groups): Add ASE_DSPR3 to the DSP group. (mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3. * doc/as.texinfo: Document -mdspr3, -mno-dspr3. Fix -mdspr2 formatting. * doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and .set nodspr3. Fix -mdspr2 formatting. * testsuite/gas/mips/mips32-dspr3.d: New file. * testsuite/gas/mips/mips32-dspr3.s: Likewise. * testsuite/gas/mips/mips.exp: Run mips32-dspr3 test. include/ * elf/mips.h (AFL_ASE_DSPR3): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_DSPR3. * opcode/mips.h (ASE_DSPR3): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and mips64r6. * mips-opc.c (D34): New macro. (mips_builtin_opcodes): Define bposge32c for DSPr3.
2016-04-19.cfi_remember_state/.cfi_restore_state documentationMartin Galvan1-5/+48
* doc/as.texinfo (.cfi_remember_state, .cfi_restore_state): Improve documentation.
2016-03-18Fix generation of as.1 manual page so that it can be converted to DocBook ↵Nick Clifton1-0/+2
format. gas * doc/as.texinfo: Place the target specific command line options into their own man page section. etc * texi2pod.pl: Add TARGET to the list of recognised man page sections.
2016-02-26Properly implement STT_COMMONH.J. Lu1-0/+9
The BFD configure option, --enable-elf-stt-common, can't be to used to verify STT_COMMON implementation with the normal binutils build. Instead, this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF assembler/objcopy and adds -z common/-z nocommon to ld. A configure option, --enable-elf-stt-common, is added to gas to specify whether ELF assembler should generate common symbols with the STT_COMMON type by default. Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF common symbols. bfd/ PR ld/19645 * bfd.c (bfd): Change flags to 20 bits. (BFD_CONVERT_ELF_COMMON): New. (BFD_USE_ELF_STT_COMMON): Likewise. (BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. * configure.ac: Remove --enable-elf-stt-common. * elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. * elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for STT_COMMON. * elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check STT_COMMON. (elf_link_convert_common_type): New function. (elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx. * elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON to object_flags. (TARGET_LITTLE_SYM): Likewise. * syms.c (BSF_KEEP_G): Renamed to ... (BSF_ELF_COMMON): This. * bfd-in2.h: Regenerated. * config.in: Likewise. * configure: Likewise. binutils/ PR ld/19645 * NEWS: Mention --elf-stt-common= for objcopy. * doc/binutils.texi: Document --elf-stt-common= for objcopy. * objcopy.c (do_elf_stt_common): New. (command_line_switch): Add OPTION_ELF_STT_COMMON. (copy_options): Add --elf-stt-common=. (copy_usage): Add --elf-stt-common=. (copy_object): Also check do_elf_stt_common for ELF targets. (copy_file): Handle do_elf_stt_common. (copy_main): Handle OPTION_ELF_STT_COMMON. * readelf.c (apply_relocations): Support STT_COMMON. * testsuite/binutils-all/common-1.s: New file. * testsuite/binutils-all/common-1a.d: Likewise. * testsuite/binutils-all/common-1b.d: Likewise. * testsuite/binutils-all/common-1c.d: Likewise. * testsuite/binutils-all/common-1d.d: Likewise. * testsuite/binutils-all/common-1e.d: Likewise. * testsuite/binutils-all/common-1f.d: Likewise. * testsuite/binutils-all/common-2.s: Likewise. * testsuite/binutils-all/common-2a.d: Likewise. * testsuite/binutils-all/common-2b.d: Likewise. * testsuite/binutils-all/common-2c.d: Likewise. * testsuite/binutils-all/common-2d.d: Likewise. * testsuite/binutils-all/common-2e.d: Likewise. * testsuite/binutils-all/common-2f.d: Likewise. * testsuite/binutils-all/objcopy.exp (objcopy_test_elf_common_symbols): New proc. Run objcopy_test_elf_common_symbols for ELF targets gas/ PR ld/19645 * NEWS: Mention --enable-elf-stt-common and --elf-stt-common= for ELF assemblers. * as.c (flag_use_elf_stt_common): New. (show_usage): Add --elf-stt-common=. (option_values): Add OPTION_ELF_STT_COMMON. (std_longopts): Add --elf-stt-common=. (parse_args): Handle --elf-stt-common=. * as.h (flag_use_elf_stt_common): New. * config.in: Regenerated. * configure: Likewise. * configure.ac: Add --enable-elf-stt-common and define DEFAULT_GENERATE_ELF_STT_COMMON. * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set. * doc/as.texinfo: Document --elf-stt-common=. * testsuite/gas/elf/common3.s: New file. * testsuite/gas/elf/common3a.d: Likewise. * testsuite/gas/elf/common3b.d: Likewise. * testsuite/gas/elf/common4.s: Likewise. * testsuite/gas/elf/common4a.d: Likewise. * testsuite/gas/elf/common4b.d: Likewise. * testsuite/gas/i386/dw2-compress-3b.d: Likewise. * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a and common4b. * testsuite/gas/i386/dw2-compress-3.d: Renamed to ... * testsuite/gas/i386/dw2-compress-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ... * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/i386.exp: Run dw2-compress-3a, dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead of dw2-compress-3 and dw2-compressed-3. include/ PR ld/19645 * bfdlink.h (bfd_link_elf_stt_common): New enum. (bfd_link_info): Add elf_stt_common. ld/ PR ld/19645 * NEWS: Mention -z common/-z nocommon for ELF targets. * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle -z common and -z nocommon. * ld.texinfo: Document -z common/-z nocommon. * lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon. * testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and --elf-stt-common=yes with assembler. * testsuite/ld-elfcomm/common-1.s: New file. * testsuite/ld-elfcomm/common-1a.d: Likewise. * testsuite/ld-elfcomm/common-1b.d: Likewise. * testsuite/ld-elfcomm/common-1c.d: Likewise. * testsuite/ld-elfcomm/common-1d.d: Likewise. * testsuite/ld-elfcomm/common-1e.d: Likewise. * testsuite/ld-elfcomm/common-1f.d: Likewise. * testsuite/ld-elfcomm/common-2.s: Likewise. * testsuite/ld-elfcomm/common-2a.d: Likewise. * testsuite/ld-elfcomm/common-2b.d: Likewise. * testsuite/ld-elfcomm/common-2c.d: Likewise. * testsuite/ld-elfcomm/common-2d.d: Likewise. * testsuite/ld-elfcomm/common-2e.d: Likewise. * testsuite/ld-elfcomm/common-2f.d: Likewise. * testsuite/ld-elfcomm/common-3a.rd: Likewise. * testsuite/ld-elfcomm/common-3b.rd: Likewise. * testsuite/ld-i386/pr19645.d: Likewise. * testsuite/ld-i386/pr19645.s: Likewise. * testsuite/ld-x86-64/largecomm-1.s: Likewise. * testsuite/ld-x86-64/largecomm-1a.d: Likewise. * testsuite/ld-x86-64/largecomm-1b.d: Likewise. * testsuite/ld-x86-64/largecomm-1c.d: Likewise. * testsuite/ld-x86-64/largecomm-1d.d: Likewise. * testsuite/ld-x86-64/largecomm-1e.d: Likewise. * testsuite/ld-x86-64/largecomm-1f.d: Likewise. * testsuite/ld-x86-64/pr19645.d: Likewise. * testsuite/ld-x86-64/pr19645.s: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes with assembler. (assembler_generates_commons): Removed. Run -z common/-z nocommon tests. Run *.d tests. * testsuite/ld-i386/i386.exp: Run pr19645. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with assembler. Test STT_COMMON with readelf.
2016-02-16Fix formatting problems caused by previous update to as.texinfo.Nick Clifton1-6/+11
* doc/as.texinfo (Section): Fix up texinfo snafus in previous update.
generated by cgit v1.1 at 2024-12-27 14:48:41 +0000